@@ -37,6 +37,7 @@ MODULE_LICENSE("GPL");
#define W8001_QUERY_PACKET 0x20
+#define W8001_CMD_STOP '0'
#define W8001_CMD_START '1'
#define W8001_CMD_QUERY '*'
#define W8001_CMD_TOUCHQUERY '%'
@@ -279,24 +280,45 @@ static int w8001_setup(struct w8001 *w8001)
struct w8001_coord coord;
int error;
- error = w8001_command(w8001, W8001_CMD_QUERY, true);
+ error = w8001_command(w8001, W8001_CMD_STOP, false);
if (error)
return error;
- parse_data(w8001->response, &coord);
+ mdelay(250); /* wait 250ms before querying the device */
- input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
- input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
- input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
- input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
- input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+ /* penabled? */
+ error = w8001_command(w8001, W8001_CMD_QUERY, true);
+ if (!error) {
+ __set_bit(BTN_TOOL_PEN, dev->keybit);
+ __set_bit(BTN_TOOL_RUBBER, dev->keybit);
+ __set_bit(BTN_STYLUS, dev->keybit);
+ __set_bit(BTN_STYLUS2, dev->keybit);
+ parse_data(w8001->response, &coord);
+
+ input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
+ input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+ input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
+ if (coord.tilt_x && coord.tilt_y) {
+ input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
+ input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+ }
+ }
+ /* touch enabled? */
error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
- if (!error) {
+
+ /* Some non-touch devices may reply to the touch query. But their
+ * second byte is empty, which indicates touch is not supported.
+ */
+ if (!error && w8001->response[1]) {
struct w8001_touch_query touch;
parse_touchquery(w8001->response, &touch);
+ input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
+ input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+ __set_bit(BTN_TOOL_FINGER, dev->keybit);
+
switch (touch.sensor_id) {
case 0:
case 2:
@@ -375,10 +397,6 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
__set_bit(BTN_TOUCH, input_dev->keybit);
- __set_bit(BTN_TOOL_PEN, input_dev->keybit);
- __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
- __set_bit(BTN_STYLUS, input_dev->keybit);
- __set_bit(BTN_STYLUS2, input_dev->keybit);
serio_set_drvdata(serio, w8001);
err = serio_open(serio, drv);