From patchwork Tue Jan 25 19:46:52 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mark Brown X-Patchwork-Id: 506681 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p0PJkh07004816 for ; Tue, 25 Jan 2011 19:46:43 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752235Ab1AYTqm (ORCPT ); Tue, 25 Jan 2011 14:46:42 -0500 Received: from opensource.wolfsonmicro.com ([80.75.67.52]:38871 "EHLO opensource2.wolfsonmicro.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751828Ab1AYTqm (ORCPT ); Tue, 25 Jan 2011 14:46:42 -0500 Received: from finisterre.wolfsonmicro.main (cpc3-sgyl4-0-0-cust125.sgyl.cable.virginmedia.com [82.41.240.126]) by opensource2.wolfsonmicro.com (Postfix) with ESMTPSA id C264E11011D; Tue, 25 Jan 2011 19:46:40 +0000 (GMT) Received: from broonie by finisterre.wolfsonmicro.main with local (Exim 4.72) (envelope-from ) id 1Phoqy-00016g-1q; Tue, 25 Jan 2011 19:47:00 +0000 From: Mark Brown To: Dmitry Torokhov Cc: linux-input@vger.kernel.org, patches@opensource.wolfsonmicro.com, Mark Brown Subject: [PATCH] Input: wm831x - Add driver for Wolfson WM831x PMIC touchscreen controllers Date: Tue, 25 Jan 2011 19:46:52 +0000 Message-Id: <1295984812-4226-1-git-send-email-broonie@opensource.wolfsonmicro.com> X-Mailer: git-send-email 1.7.2.3 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Tue, 25 Jan 2011 19:46:43 +0000 (UTC) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 0c9f4b1..46656b0 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -423,6 +423,16 @@ config TOUCHSCREEN_UCB1400 To compile this driver as a module, choose M here: the module will be called ucb1400_ts. +config TOUCHSCREEN_WM831X + tristate "Support for WM831x touchscreen controllers" + depends on MFD_WM831X + help + This enables support for the touchscreen controller on the WM831x + series of PMICs. + + To compile this driver as a module, choose M here: the + module will be called wm831x-ts. + config TOUCHSCREEN_WM97XX tristate "Support for WM97xx AC97 touchscreen controllers" depends on AC97_BUS diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 718bcc8..e8dcfab 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o +obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c new file mode 100644 index 0000000..155da5d --- /dev/null +++ b/drivers/input/touchscreen/wm831x-ts.c @@ -0,0 +1,370 @@ +/* + * wm831x-ts.c - Touchscreen driver for WM831x PMICs + * + * Copyright 2011 Wolfson Microelectronics plc. + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * R16424 (0x4028) - Touch Control 1 + */ +#define WM831X_TCH_ENA 0x8000 /* TCH_ENA */ +#define WM831X_TCH_CVT_ENA 0x4000 /* TCH_CVT_ENA */ +#define WM831X_TCH_SLPENA 0x1000 /* TCH_SLPENA */ +#define WM831X_TCH_Z_ENA 0x0400 /* TCH_Z_ENA */ +#define WM831X_TCH_Y_ENA 0x0200 /* TCH_Y_ENA */ +#define WM831X_TCH_X_ENA 0x0100 /* TCH_X_ENA */ +#define WM831X_TCH_DELAY_MASK 0x00E0 /* TCH_DELAY - [7:5] */ +#define WM831X_TCH_DELAY_SHIFT 5 /* TCH_DELAY - [7:5] */ +#define WM831X_TCH_DELAY_WIDTH 3 /* TCH_DELAY - [7:5] */ +#define WM831X_TCH_RATE_MASK 0x001F /* TCH_RATE - [4:0] */ +#define WM831X_TCH_RATE_SHIFT 0 /* TCH_RATE - [4:0] */ +#define WM831X_TCH_RATE_WIDTH 5 /* TCH_RATE - [4:0] */ + +/* + * R16425 (0x4029) - Touch Control 2 + */ +#define WM831X_TCH_PD_WK 0x2000 /* TCH_PD_WK */ +#define WM831X_TCH_5WIRE 0x1000 /* TCH_5WIRE */ +#define WM831X_TCH_PDONLY 0x0800 /* TCH_PDONLY */ +#define WM831X_TCH_ISEL 0x0100 /* TCH_ISEL */ +#define WM831X_TCH_RPU_MASK 0x000F /* TCH_RPU - [3:0] */ +#define WM831X_TCH_RPU_SHIFT 0 /* TCH_RPU - [3:0] */ +#define WM831X_TCH_RPU_WIDTH 4 /* TCH_RPU - [3:0] */ + +/* + * R16426-8 (0x402A-C) - Touch Data X/Y/X + */ +#define WM831X_TCH_PD 0x8000 /* TCH_PD1 */ +#define WM831X_TCH_DATA_MASK 0x0FFF /* TCH_DATA - [11:0] */ +#define WM831X_TCH_DATA_SHIFT 0 /* TCH_DATA - [11:0] */ +#define WM831X_TCH_DATA_WIDTH 12 /* TCH_DATA - [11:0] */ + +struct wm831x_ts { + struct input_dev *input_dev; + struct wm831x *wm831x; + unsigned int data_irq; + unsigned int pd_irq; + bool pressure; + bool pen_down; +}; + +static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data) +{ + struct wm831x_ts *wm831x_ts = irq_data; + struct wm831x *wm831x = wm831x_ts->wm831x; + static int data_types[] = { ABS_X, ABS_Y, ABS_PRESSURE }; + u16 data[3]; + int count, i, ret; + + wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1, + WM831X_TCHDATA_EINT, WM831X_TCHDATA_EINT); + + if (wm831x_ts->pressure) + count = 3; + else + count = 2; + + ret = wm831x_bulk_read(wm831x, WM831X_TOUCH_DATA_X, count, + data); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to read touch data: %d\n", + ret); + return IRQ_NONE; + } + + /* We get a pen down reading on every reading, report pen up if any + * individual reading does so. + */ + wm831x_ts->pen_down = true; + for (i = 0; i < count; i++) { + if (!(data[i] & WM831X_TCH_PD)) { + wm831x_ts->pen_down = false; + continue; + } + input_report_abs(wm831x_ts->input_dev, data_types[i], + data[i] & WM831X_TCH_DATA_MASK); + } + + if (!wm831x_ts->pen_down) { + disable_irq_nosync(wm831x_ts->data_irq); + + /* Don't need data any more */ + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | + WM831X_TCH_Z_ENA, 0); + + /* Flush any final samples that arrived while reading */ + wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1, + WM831X_TCHDATA_EINT, WM831X_TCHDATA_EINT); + + wm831x_bulk_read(wm831x, WM831X_TOUCH_DATA_X, count, data); + + if (wm831x_ts->pressure) + input_report_abs(wm831x_ts->input_dev, + ABS_PRESSURE, 0); + + input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 0); + } + + input_sync(wm831x_ts->input_dev); + + return IRQ_HANDLED; +} + +static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data) +{ + struct wm831x_ts *wm831x_ts = irq_data; + struct wm831x *wm831x = wm831x_ts->wm831x; + int ena; + + /* Start collecting data */ + if (wm831x_ts->pressure) + ena = WM831X_TCH_Z_ENA; + else + ena = 0; + + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA, + WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | ena); + + input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1); + input_sync(wm831x_ts->input_dev); + + wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1, + WM831X_TCHPD_EINT, WM831X_TCHPD_EINT); + + wm831x_ts->pen_down = true; + enable_irq(wm831x_ts->data_irq); + + return IRQ_HANDLED; +} + +static int wm831x_ts_input_open(struct input_dev *idev) +{ + struct wm831x_ts *wm831x_ts = input_get_drvdata(idev); + struct wm831x *wm831x = wm831x_ts->wm831x; + + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_ENA, WM831X_TCH_ENA); + + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_CVT_ENA, WM831X_TCH_CVT_ENA); + + return 0; +} + +static void wm831x_ts_input_close(struct input_dev *idev) +{ + struct wm831x_ts *wm831x_ts = input_get_drvdata(idev); + struct wm831x *wm831x = wm831x_ts->wm831x; + + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_ENA | WM831X_TCH_CVT_ENA | + WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | + WM831X_TCH_Z_ENA, 0); + + if (wm831x_ts->pen_down) + disable_irq(wm831x_ts->data_irq); +} + +static __devinit int wm831x_ts_probe(struct platform_device *pdev) +{ + struct wm831x_ts *wm831x_ts; + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *core_pdata = dev_get_platdata(pdev->dev.parent); + struct wm831x_touch_pdata *pdata; + struct input_dev *input_dev; + int ret; + + wm831x_ts = kzalloc(sizeof(struct wm831x_ts), GFP_KERNEL); + if (!wm831x_ts) + return -ENOMEM; + + wm831x_ts->wm831x = wm831x; + + input_dev = input_allocate_device(); + if (input_dev == NULL) { + ret = -ENOMEM; + goto err_alloc; + } + wm831x_ts->input_dev = input_dev; + + if (core_pdata && core_pdata->touch) + pdata = core_pdata->touch; + else + pdata = NULL; + + /* If we have a direct IRQ use it, otherwise use the interrupt + * from the WM831x IRQ controller. + */ + if (pdata && pdata->data_irq) + wm831x_ts->data_irq = pdata->data_irq; + else + wm831x_ts->data_irq = platform_get_irq_byname(pdev, "TCHDATA"); + + if (pdata && pdata->pd_irq) + wm831x_ts->pd_irq = pdata->pd_irq; + else + wm831x_ts->pd_irq = platform_get_irq_byname(pdev, "TCHPD"); + + if (pdata && pdata->pressure) + wm831x_ts->pressure = true; + else + wm831x_ts->pressure = false; + + /* Five wire touchscreens can't report pressure */ + if (pdata && pdata->fivewire) { + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2, + WM831X_TCH_5WIRE, WM831X_TCH_5WIRE); + + /* Pressure measurments are not possible for five wire mode */ + WARN_ON(pdata->pressure && pdata->fivewire); + wm831x_ts->pressure = false; + } else { + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2, + WM831X_TCH_5WIRE, 0); + } + + if (pdata) { + switch (pdata->isel) { + default: + dev_err(&pdev->dev, "Unsupported ISEL setting: %d\n", + pdata->isel); + /* Fall through */ + case 200: + case 0: + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2, + WM831X_TCH_ISEL, 0); + break; + case 400: + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2, + WM831X_TCH_ISEL, WM831X_TCH_ISEL); + break; + } + } + + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2, + WM831X_TCH_PDONLY, 0); + + /* Default to 96 samples/sec */ + wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, + WM831X_TCH_RATE_MASK, 6); + + ret = request_threaded_irq(wm831x_ts->data_irq, NULL, + wm831x_ts_data_irq, + IRQF_ONESHOT, + "Touchscreen data", wm831x_ts); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to request data IRQ %d: %d\n", + wm831x_ts->data_irq, ret); + goto err_dev_alloc; + } + disable_irq(wm831x_ts->data_irq); + + ret = request_threaded_irq(wm831x_ts->pd_irq, NULL, + wm831x_ts_pen_down_irq, IRQF_ONESHOT, + "Touchscreen pen down", wm831x_ts); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to request pen down IRQ %d: %d\n", + wm831x_ts->pd_irq, ret); + goto err_data_irq; + } + + platform_set_drvdata(pdev, wm831x_ts); + + /* set up touch configuration */ + input_dev->name = "WM831x touchscreen"; + input_dev->phys = "wm831x"; + input_dev->open = wm831x_ts_input_open; + input_dev->close = wm831x_ts_input_close; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_X, 0, 4095, 5, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 4095, 5, 0); + if (wm831x_ts->pressure) + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 4095, 5, 0); + + input_set_drvdata(input_dev, wm831x_ts); + input_dev->dev.parent = &pdev->dev; + + ret = input_register_device(input_dev); + if (ret < 0) + goto err_pd_irq; + + return ret; + +err_pd_irq: + free_irq(wm831x_ts->pd_irq, wm831x_ts); +err_data_irq: + free_irq(wm831x_ts->data_irq, wm831x_ts); +err_dev_alloc: + input_free_device(input_dev); +err_alloc: + kfree(wm831x_ts); + + return ret; +} + +static __devexit int wm831x_ts_remove(struct platform_device *pdev) +{ + struct wm831x_ts *wm831x_ts = platform_get_drvdata(pdev); + + free_irq(wm831x_ts->pd_irq, wm831x_ts); + free_irq(wm831x_ts->data_irq, wm831x_ts); + input_unregister_device(wm831x_ts->input_dev); + kfree(wm831x_ts); + + return 0; +} + +static struct platform_driver wm831x_ts_driver = { + .driver = { + .name = "wm831x-touch", + .owner = THIS_MODULE, + }, + .probe = wm831x_ts_probe, + .remove = __devexit_p(wm831x_ts_remove), +}; + +static int __init wm831x_ts_init(void) +{ + return platform_driver_register(&wm831x_ts_driver); +} +module_init(wm831x_ts_init); + +static void __exit wm831x_ts_exit(void) +{ + platform_driver_unregister(&wm831x_ts_driver); +} +module_exit(wm831x_ts_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("WM831x PMIC touchscreen driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-touch"); diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index fd322ac..173086d 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -80,7 +80,8 @@ struct wm831x_touch_pdata { int isel; /** Current for pen down (uA) */ int rpu; /** Pen down sensitivity resistor divider */ int pressure; /** Report pressure (boolean) */ - int data_irq; /** Touch data ready IRQ */ + unsigned int data_irq; /** Touch data ready IRQ */ + unsigned int pd_irq; /** Touch pendown detect IRQ */ }; enum wm831x_watchdog_action {