From patchwork Wed Feb 16 04:06:48 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alan Ott X-Patchwork-Id: 565661 X-Patchwork-Delegate: jikos@jikos.cz Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p1G480mj029513 for ; Wed, 16 Feb 2011 04:08:15 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756539Ab1BPEHV (ORCPT ); Tue, 15 Feb 2011 23:07:21 -0500 Received: from core.signal11.us ([64.251.29.136]:48117 "EHLO core.signal11.us" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756715Ab1BPEGx (ORCPT ); Tue, 15 Feb 2011 23:06:53 -0500 Received: from localhost (localhost.localdomain [127.0.0.1]) by core.signal11.us (Postfix) with SMTP id 0EE631CCABD6 for ; Tue, 15 Feb 2011 23:06:52 -0500 (EST) Received: from localhost.localdomain (c-68-59-135-75.hsd1.fl.comcast.net [68.59.135.75]) by core.signal11.us (Postfix) with ESMTP id 169971CCABD9; Tue, 15 Feb 2011 23:06:50 -0500 (EST) From: Alan Ott To: Randy Dunlap , Alan Ott , linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, jkosina@suse.cz, ospite@studenti.unina.it, linux-input@vger.kernel.org, linux-bluetooth@vger.kernel.org, bgood@velocity.net Cc: Alan Ott Subject: [PATCH v4 1/2] HID: Documentation for hidraw Date: Tue, 15 Feb 2011 23:06:48 -0500 Message-Id: <1297829209-10511-2-git-send-email-alan@signal11.us> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: <1297829209-10511-1-git-send-email-alan@signal11.us> References: <1297829209-10511-1-git-send-email-alan@signal11.us> X-DSPAM-Result: Whitelisted X-DSPAM-Processed: Tue Feb 15 23:06:51 2011 X-DSPAM-Confidence: 0.9899 X-DSPAM-Probability: 0.0000 X-DSPAM-Signature: 4d5b4d5b144802766446869 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Wed, 16 Feb 2011 04:08:15 +0000 (UTC) diff --git a/Documentation/hid/Makefile b/Documentation/hid/Makefile new file mode 100644 index 0000000..7811cb0 --- /dev/null +++ b/Documentation/hid/Makefile @@ -0,0 +1,8 @@ +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o + +# List of programs to build +hostprogs-y := hid-example + +# Tell kbuild to always build the programs +always := $(hostprogs-y) diff --git a/Documentation/hid/hid-example.c b/Documentation/hid/hid-example.c new file mode 100644 index 0000000..40e3d62 --- /dev/null +++ b/Documentation/hid/hid-example.c @@ -0,0 +1,167 @@ +/* + * Hidraw Userspace Example + * + * Copyright (c) 2010 Alan Ott + * Copyright (c) 2010 Signal 11 Software + * + * The code may be used by anyone for any purpose, + * and can serve as a starting point for developing + * applications using hidraw. + */ + +/* Linux */ +#include +#include +#include + +/* Unix */ +#include +#include +#include +#include +#include + +/* C */ +#include +#include +#include +#include + +const char *bus_str(int bus); + +int main(int argc, char **argv) +{ + int fd; + int i, res, desc_size = 0; + char buf[256]; + struct hidraw_report_descriptor rpt_desc; + struct hidraw_devinfo info; + + /* Open the Device with non-blocking reads. In real life, + don't use a hard coded path; use libudev instead. */ + fd = open("/dev/hidraw0", O_RDWR|O_NONBLOCK); + + if (fd < 0) { + perror("Unable to open device"); + return 1; + } + + memset(&rpt_desc, 0x0, sizeof(rpt_desc)); + memset(&info, 0x0, sizeof(info)); + memset(buf, 0x0, sizeof(buf)); + + /* Get Report Descriptor Size */ + res = ioctl(fd, HIDIOCGRDESCSIZE, &desc_size); + if (res < 0) + perror("HIDIOCGRDESCSIZE"); + else + printf("Report Descriptor Size: %d\n", desc_size); + + /* Get Report Descriptor */ + rpt_desc.size = desc_size; + res = ioctl(fd, HIDIOCGRDESC, &rpt_desc); + if (res < 0) { + perror("HIDIOCGRDESC"); + } else { + printf("Report Descriptor:\n"); + for (i = 0; i < rpt_desc.size; i++) + printf("%hhx ", rpt_desc.value[i]); + puts("\n"); + } + + /* Get Raw Name */ + res = ioctl(fd, HIDIOCGRAWNAME(256), buf); + if (res < 0) + perror("HIDIOCGRAWNAME"); + else + printf("Raw Name: %s\n", buf); + + /* Get Physical Location */ + res = ioctl(fd, HIDIOCGRAWPHYS(256), buf); + if (res < 0) + perror("HIDIOCGRAWPHYS"); + else + printf("Raw Phys: %s\n", buf); + + /* Get Raw Info */ + res = ioctl(fd, HIDIOCGRAWINFO, &info); + if (res < 0) { + perror("HIDIOCGRAWINFO"); + } else { + printf("Raw Info:\n"); + printf("\tbustype: %d (%s)\n", + info.bustype, bus_str(info.bustype)); + printf("\tvendor: 0x%04hx\n", info.vendor); + printf("\tproduct: 0x%04hx\n", info.product); + } + + /* Set Feature */ + buf[0] = 0x9; /* Report Number */ + buf[1] = 0xff; + buf[2] = 0xff; + buf[3] = 0xff; + res = ioctl(fd, HIDIOCSFEATURE(4), buf); + if (res < 0) + perror("HIDIOCSFEATURE"); + else + printf("ioctl HIDIOCGFEATURE returned: %d\n", res); + + /* Get Feature */ + buf[0] = 0x9; /* Report Number */ + res = ioctl(fd, HIDIOCGFEATURE(256), buf); + if (res < 0) { + perror("HIDIOCGFEATURE"); + } else { + printf("ioctl HIDIOCGFEATURE returned: %d\n", res); + printf("Report data (not containing the report number):\n\t"); + for (i = 0; i < res; i++) + printf("%hhx ", buf[i]); + puts("\n"); + } + + /* Send a Report to the Device */ + buf[0] = 0x1; /* Report Number */ + buf[1] = 0x77; + res = write(fd, buf, 2); + if (res < 0) { + printf("Error: %d\n", errno); + perror("write"); + } else { + printf("write() wrote %d bytes\n", res); + } + + /* Get a report from the device */ + res = read(fd, buf, 16); + if (res < 0) { + perror("read"); + } else { + printf("read() read %d bytes:\n\t", res); + for (i = 0; i < res; i++) + printf("%hhx ", buf[i]); + puts("\n"); + } + close(fd); + return 0; +} + +const char * +bus_str(int bus) +{ + switch (bus) { + case BUS_USB: + return "USB"; + break; + case BUS_HIL: + return "HIL"; + break; + case BUS_BLUETOOTH: + return "Bluetooth"; + break; + case BUS_VIRTUAL: + return "Virtual"; + break; + default: + return "Other"; + break; + } +} diff --git a/Documentation/hid/hidraw.txt b/Documentation/hid/hidraw.txt new file mode 100644 index 0000000..2e0d39a --- /dev/null +++ b/Documentation/hid/hidraw.txt @@ -0,0 +1,119 @@ + HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices + ================================================================== + +The hidraw driver provides a raw interface to USB and Bluetooth Human +Interface Devices (HIDs). It differs from hiddev in that reports sent and +received are not parsed by the HID parser, but are sent to and received from +the device unmodified. + +Hidraw should be used if the userspace application knows exactly how to +communicate with the hardware device, and is able to construct the HID +reports manually. This is often the case when making userspace drivers for +custom HID devices. + +Hidraw is also useful for communicating with non-conformant HID devices +which send and receive data in a way that is inconsistent with their report +descriptors. Because hiddev parses reports which are sent and received +through it, checking them against the device's report descriptor, such +communication with these non-conformant devices is impossible using hiddev. +Hidraw is the only alternative, short of writing a custom kernel driver, for +these non-conformant devices. + +A benefit of hidraw is that its use by userspace applications is independent +of the underlying hardware type. Currently, Hidraw is implemented for USB +and Bluetooth. In the future, as new hardware bus types are developed which +use the HID specification, hidraw will be expanded to add support for these +new bus types. + +Hidraw uses a dynamic major number, meaning that udev should be relied on to +create hidraw device nodes. Udev will typically create the device nodes +directly under /dev (eg: /dev/hidraw0). As this location is distribution- +and udev rule-dependent, applications should use libudev to locate hidraw +devices attached to the system. There is a tutorial on libudev with a +working example at: + http://www.signal11.us/oss/udev/ + +The HIDRAW API +--------------- + +read() +------- +read() will read a queued report received from the HID device. On USB +devices, the reports read using read() are the reports sent from the device +on the INTERRUPT IN endpoint. By default, read() will block until there is +a report available to be read. read() can be made non-blocking, by passing +the O_NONBLOCK flag to open(), or by setting the O_NONBLOCK flag using +fcntl(). + +On a device which uses numbered reports, the first byte of the returned data +will be the report number; the report data follows, beginning in the second +byte. For devices which do not use numbered reports, the report data +will begin at the first byte. + +write() +-------- +The write() function will write a report to the device. For USB devices, if +the device has an INTERRUPT OUT endpoint, the report will be sent on that +endpoint. If it does not, the report will be sent over the control endpoint, +using a SET_REPORT transfer. + +The first byte of the buffer passed to write() should be set to the report +number. If the device does not use numbered reports, the first byte should +be set to 0. The report data itself should begin at the second byte. + +ioctl() +-------- +Hidraw supports the following ioctls: + +HIDIOCGRDESCSIZE: Get Report Descriptor Size +This ioctl will get the size of the device's report descriptor. + +HIDIOCGRDESC: Get Report Descriptor +This ioctl returns the device's report descriptor using a +hidraw_report_descriptor struct. Make sure to set the size field of the +hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE. + +HIDIOCGRAWINFO: Get Raw Info +This ioctl will return a hidraw_devinfo struct containing the bus type, the +vendor ID (VID), and product ID (PID) of the device. The bus type can be one +of: + BUS_USB + BUS_HIL + BUS_BLUETOOTH + BUS_VIRTUAL +which are defined in linux/input.h. + +HIDIOCGRAWNAME(len): Get Raw Name +This ioctl returns a string containing the vendor and product strings of +the device. The returned string is Unicode, UTF-8 encoded. + +HIDIOCGRAWPHYS(len): Get Physical Address +This ioctl returns a string representing the physical address of the device. +For USB devices, the string contains the physical path to the device (the +USB controller, hubs, ports, etc). For Bluetooth devices, the string +contains the hardware (MAC) address of the device. + +HIDIOCSFEATURE(len): Send a Feature Report +This ioctl will send a feature report to the device. Per the HID +specification, feature reports are always sent using the control endpoint. +Set the first byte of the supplied buffer to the report number. For devices +which do not use numbered reports, set the first byte to 0. The report data +begins in the second byte. Make sure to set len accordingly, to one more +than the length of the report (to account for the report number). + +HIDIOCGFEATURE(len): Get a Feature Report +This ioctl will request a feature report from the device using the control +endpoint. The first byte of the supplied buffer should be set to the report +number of the requested report. For devices which do not use numbered +reports, set the first byte to 0. The report will be returned starting at +the first byte of the buffer (ie: the report number is not returned). + +Example +--------- +In this directory, find hid-example.c, which shows examples of read(), +write(), and all the ioctls for hidraw. The code may be used by anyone for +any purpose, and can serve as a starting point for developing applications +using hidraw. + +Document by: + Alan Ott , Signal 11 Software