From patchwork Tue Mar 22 16:34:01 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin Tissoires X-Patchwork-Id: 653081 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p2MGXlAv029436 for ; Tue, 22 Mar 2011 16:33:47 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753665Ab1CVQdr (ORCPT ); Tue, 22 Mar 2011 12:33:47 -0400 Received: from 89-230.252-81.static-ip.oleane.fr ([81.252.230.89]:59414 "EHLO smtp.lii-enac.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754143Ab1CVQdq (ORCPT ); Tue, 22 Mar 2011 12:33:46 -0400 Received: from gloupti.lii-enac.fr (unknown [10.0.0.110]) by smtp.lii-enac.fr (DoorWays) with ESMTP id 7EECC9518C; Tue, 22 Mar 2011 17:33:42 +0100 (CET) From: Benjamin Tissoires To: Dmitry Torokhov , Henrik Rydberg , Benjamin Tissoires , Jiri Kosina , Stephane Chatty , linux-input@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v4] hid-multitouch: migrate 3M PCT touch screens to hid-multitouch Date: Tue, 22 Mar 2011 17:34:01 +0100 Message-Id: <1300811641-3327-1-git-send-email-benjamin.tissoires@enac.fr> X-Mailer: git-send-email 1.7.4 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Tue, 22 Mar 2011 16:33:48 +0000 (UTC) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 1edb0bd..996ae3a 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -55,12 +55,6 @@ source "drivers/hid/usbhid/Kconfig" menu "Special HID drivers" depends on HID -config HID_3M_PCT - tristate "3M PCT touchscreen" - depends on USB_HID - ---help--- - Support for 3M PCT touch screens. - config HID_A4TECH tristate "A4 tech mice" if EXPERT depends on USB_HID @@ -314,6 +308,7 @@ config HID_MULTITOUCH Generic support for HID multitouch panels. Say Y here if you have one of the following devices: + - 3M PCT touch screens - Cando dual touch panel - Cypress TrueTouch panels - Hanvon dual touch panels diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index f8b90e4..11c9f0b 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -25,7 +25,6 @@ ifdef CONFIG_LOGIWII_FF hid-logitech-y += hid-lg4ff.o endif -obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o obj-$(CONFIG_HID_ACRUX) += hid-axff.o obj-$(CONFIG_HID_APPLE) += hid-apple.o diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c deleted file mode 100644 index 5243ae2..0000000 --- a/drivers/hid/hid-3m-pct.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * HID driver for 3M PCT multitouch panels - * - * Copyright (c) 2009-2010 Stephane Chatty - * Copyright (c) 2010 Henrik Rydberg - * Copyright (c) 2010 Canonical, Ltd. - * - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -#include -#include -#include -#include -#include -#include - -MODULE_AUTHOR("Stephane Chatty "); -MODULE_DESCRIPTION("3M PCT multitouch panels"); -MODULE_LICENSE("GPL"); - -#include "hid-ids.h" - -#define MAX_SLOTS 60 - -/* estimated signal-to-noise ratios */ -#define SN_MOVE 2048 -#define SN_WIDTH 128 - -struct mmm_finger { - __s32 x, y, w, h; - bool touch, valid; -}; - -struct mmm_data { - struct mmm_finger f[MAX_SLOTS]; - __u8 curid; - __u8 nexp, nreal; - bool touch, valid; -}; - -static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) -{ - int f1 = field->logical_minimum; - int f2 = field->logical_maximum; - int df = f2 - f1; - - switch (usage->hid & HID_USAGE_PAGE) { - - case HID_UP_BUTTON: - return -1; - - case HID_UP_GENDESK: - switch (usage->hid) { - case HID_GD_X: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_POSITION_X); - input_set_abs_params(hi->input, ABS_MT_POSITION_X, - f1, f2, df / SN_MOVE, 0); - /* touchscreen emulation */ - input_set_abs_params(hi->input, ABS_X, - f1, f2, df / SN_MOVE, 0); - return 1; - case HID_GD_Y: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_POSITION_Y); - input_set_abs_params(hi->input, ABS_MT_POSITION_Y, - f1, f2, df / SN_MOVE, 0); - /* touchscreen emulation */ - input_set_abs_params(hi->input, ABS_Y, - f1, f2, df / SN_MOVE, 0); - return 1; - } - return 0; - - case HID_UP_DIGITIZER: - switch (usage->hid) { - /* we do not want to map these: no input-oriented meaning */ - case 0x14: - case 0x23: - case HID_DG_INPUTMODE: - case HID_DG_DEVICEINDEX: - case HID_DG_CONTACTCOUNT: - case HID_DG_CONTACTMAX: - case HID_DG_INRANGE: - case HID_DG_CONFIDENCE: - return -1; - case HID_DG_TIPSWITCH: - /* touchscreen emulation */ - hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); - input_set_capability(hi->input, EV_KEY, BTN_TOUCH); - return 1; - case HID_DG_WIDTH: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TOUCH_MAJOR); - input_set_abs_params(hi->input, ABS_MT_TOUCH_MAJOR, - f1, f2, df / SN_WIDTH, 0); - return 1; - case HID_DG_HEIGHT: - hid_map_usage(hi, usage, bit, max, - EV_ABS, ABS_MT_TOUCH_MINOR); - input_set_abs_params(hi->input, ABS_MT_TOUCH_MINOR, - f1, f2, df / SN_WIDTH, 0); - input_set_abs_params(hi->input, ABS_MT_ORIENTATION, - 0, 1, 0, 0); - return 1; - case HID_DG_CONTACTID: - input_mt_init_slots(hi->input, MAX_SLOTS); - return 1; - } - /* let hid-input decide for the others */ - return 0; - - case 0xff000000: - /* we do not want to map these: no input-oriented meaning */ - return -1; - } - - return 0; -} - -static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi, - struct hid_field *field, struct hid_usage *usage, - unsigned long **bit, int *max) -{ - /* tell hid-input to skip setup of these event types */ - if (usage->type == EV_KEY || usage->type == EV_ABS) - set_bit(usage->type, hi->input->evbit); - return -1; -} - -/* - * this function is called when a whole packet has been received and processed, - * so that it can decide what to send to the input layer. - */ -static void mmm_filter_event(struct mmm_data *md, struct input_dev *input) -{ - int i; - for (i = 0; i < MAX_SLOTS; ++i) { - struct mmm_finger *f = &md->f[i]; - if (!f->valid) { - /* this finger is just placeholder data, ignore */ - continue; - } - input_mt_slot(input, i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, f->touch); - if (f->touch) { - /* this finger is on the screen */ - int wide = (f->w > f->h); - /* divided by two to match visual scale of touch */ - int major = max(f->w, f->h) >> 1; - int minor = min(f->w, f->h) >> 1; - - input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x); - input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y); - input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide); - input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); - input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); - } - f->valid = 0; - } - - input_mt_report_pointer_emulation(input, true); - input_sync(input); -} - -/* - * this function is called upon all reports - * so that we can accumulate contact point information, - * and call input_mt_sync after each point. - */ -static int mmm_event(struct hid_device *hid, struct hid_field *field, - struct hid_usage *usage, __s32 value) -{ - struct mmm_data *md = hid_get_drvdata(hid); - /* - * strangely, this function can be called before - * field->hidinput is initialized! - */ - if (hid->claimed & HID_CLAIMED_INPUT) { - struct input_dev *input = field->hidinput->input; - switch (usage->hid) { - case HID_DG_TIPSWITCH: - md->touch = value; - break; - case HID_DG_CONFIDENCE: - md->valid = value; - break; - case HID_DG_WIDTH: - if (md->valid) - md->f[md->curid].w = value; - break; - case HID_DG_HEIGHT: - if (md->valid) - md->f[md->curid].h = value; - break; - case HID_DG_CONTACTID: - value = clamp_val(value, 0, MAX_SLOTS - 1); - if (md->valid) { - md->curid = value; - md->f[value].touch = md->touch; - md->f[value].valid = 1; - md->nreal++; - } - break; - case HID_GD_X: - if (md->valid) - md->f[md->curid].x = value; - break; - case HID_GD_Y: - if (md->valid) - md->f[md->curid].y = value; - break; - case HID_DG_CONTACTCOUNT: - if (value) - md->nexp = value; - if (md->nreal >= md->nexp) { - mmm_filter_event(md, input); - md->nreal = 0; - } - break; - } - } - - /* we have handled the hidinput part, now remains hiddev */ - if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event) - hid->hiddev_hid_event(hid, field, usage, value); - - return 1; -} - -static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id) -{ - int ret; - struct mmm_data *md; - - hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC; - - md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL); - if (!md) { - hid_err(hdev, "cannot allocate 3M data\n"); - return -ENOMEM; - } - hid_set_drvdata(hdev, md); - - ret = hid_parse(hdev); - if (!ret) - ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); - - if (ret) - kfree(md); - return ret; -} - -static void mmm_remove(struct hid_device *hdev) -{ - hid_hw_stop(hdev); - kfree(hid_get_drvdata(hdev)); - hid_set_drvdata(hdev, NULL); -} - -static const struct hid_device_id mmm_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) }, - { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) }, - { } -}; -MODULE_DEVICE_TABLE(hid, mmm_devices); - -static const struct hid_usage_id mmm_grabbed_usages[] = { - { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, - { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1} -}; - -static struct hid_driver mmm_driver = { - .name = "3m-pct", - .id_table = mmm_devices, - .probe = mmm_probe, - .remove = mmm_remove, - .input_mapping = mmm_input_mapping, - .input_mapped = mmm_input_mapped, - .usage_table = mmm_grabbed_usages, - .event = mmm_event, -}; - -static int __init mmm_init(void) -{ - return hid_register_driver(&mmm_driver); -} - -static void __exit mmm_exit(void) -{ - hid_unregister_driver(&mmm_driver); -} - -module_init(mmm_init); -module_exit(mmm_exit); - diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index d31301e..0175f85 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -11,6 +11,12 @@ * Copyright (c) 2010 Henrik Rydberg * Copyright (c) 2010 Canonical, Ltd. * + * This code is partly based on hid-3m-pct.c: + * + * Copyright (c) 2009-2010 Stephane Chatty + * Copyright (c) 2010 Henrik Rydberg + * Copyright (c) 2010 Canonical, Ltd. + * */ /* @@ -69,6 +75,8 @@ struct mt_class { __s32 name; /* MT_CLS */ __s32 quirks; __s32 sn_move; /* Signal/noise ratio for move events */ + __s32 sn_width; /* Signal/noise ratio for width events */ + __s32 sn_height; /* Signal/noise ratio for height events */ __s32 sn_pressure; /* Signal/noise ratio for pressure events */ __u8 maxcontacts; }; @@ -80,6 +88,7 @@ struct mt_class { #define MT_CLS_CYPRESS 4 #define MT_CLS_EGALAX 5 #define MT_CLS_STANTUM 6 +#define MT_CLS_3M 7 #define MT_DEFAULT_MAXCONTACT 10 @@ -141,6 +150,12 @@ struct mt_class mt_classes[] = { }, { .name = MT_CLS_STANTUM, .quirks = MT_QUIRK_VALID_IS_CONFIDENCE }, + { .name = MT_CLS_3M, + .quirks = MT_QUIRK_VALID_IS_CONFIDENCE | + MT_QUIRK_SLOT_IS_CONTACTID, + .sn_move = 2048, + .sn_width = 128, + .sn_height = 128 }, { } }; @@ -230,11 +245,15 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, case HID_DG_WIDTH: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MAJOR); + set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field, + cls->sn_width); td->last_slot_field = usage->hid; return 1; case HID_DG_HEIGHT: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MINOR); + set_abs(hi->input, ABS_MT_TOUCH_MINOR, field, + cls->sn_height); input_set_abs_params(hi->input, ABS_MT_ORIENTATION, 0, 1, 0, 0); td->last_slot_field = usage->hid; @@ -332,11 +351,18 @@ static void mt_emit_event(struct mt_device *td, struct input_dev *input) input_mt_report_slot_state(input, MT_TOOL_FINGER, s->touch_state); if (s->touch_state) { + /* this finger is on the screen */ + int wide = (s->w > s->h); + /* divided by two to match visual scale of touch */ + int major = max(s->w, s->h) >> 1; + int minor = min(s->w, s->h) >> 1; + input_event(input, EV_ABS, ABS_MT_POSITION_X, s->x); input_event(input, EV_ABS, ABS_MT_POSITION_Y, s->y); + input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide); input_event(input, EV_ABS, ABS_MT_PRESSURE, s->p); - input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, s->w); - input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, s->h); + input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); + input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); } s->seen_in_this_frame = false; @@ -398,6 +424,15 @@ static int mt_event(struct hid_device *hid, struct hid_field *field, break; default: + if (td->last_field_index + && field->index == td->last_field_index) + /* we reach here when the last field in the + * report is not related to multitouch. + * This is not good. As a temporary solution, + * we trigger our mt event completion and + * ignore the field. + */ + break; /* fallback to the generic hidinput handling */ return 0; } @@ -513,6 +548,14 @@ static void mt_remove(struct hid_device *hdev) static const struct hid_device_id mt_devices[] = { + /* 3M panels */ + { .driver_data = MT_CLS_3M, + HID_USB_DEVICE(USB_VENDOR_ID_3M, + USB_DEVICE_ID_3M1968) }, + { .driver_data = MT_CLS_3M, + HID_USB_DEVICE(USB_VENDOR_ID_3M, + USB_DEVICE_ID_3M2256) }, + /* Cando panels */ { .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER, HID_USB_DEVICE(USB_VENDOR_ID_CANDO,