@@ -57,6 +57,24 @@ static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
return rdesc;
}
+/* Sixaxis HID report has acclerometers/gyro with MSByte first, this has
+ * to be BYTE_SWAPPED before passing up to joystick interface
+ */
+static int sony_raw_event(struct hid_device *hdev, struct hid_report *report, __u8 *rd, int size)
+{
+ struct sony_sc *sc = hid_get_drvdata(hdev);
+
+ if ((sc->quirks & SIXAXIS_CONTROLLER_USB) &&
+ rd[0] == 0x01 && size == 49) {
+ swap(rd[41], rd[42]);
+ swap(rd[43], rd[44]);
+ swap(rd[45], rd[46]);
+ swap(rd[47], rd[48]);
+ }
+
+ return 0;
+}
+
/*
* The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
* like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
@@ -205,6 +223,7 @@ static struct hid_driver sony_driver = {
.probe = sony_probe,
.remove = sony_remove,
.report_fixup = sony_report_fixup,
+ .raw_event = sony_raw_event
};
static int __init sony_init(void)
The accelerometers/gyro on the sixaxis are reported in the wrong endianness (ie. not compatible with HID), so this patch intercepts the report and swaps the appropriate bytes over. Accelerometers are scaled with a nominal value of +/-4000 = 1G, maximum value would be around +/-32768 = 8G. Gyro on my device always reports -32768, might need some calibration set within the controller. Signed-off-by: Simon Wood <simon@mungewell.org> --- drivers/hid/hid-sony.c | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-)