@@ -231,22 +231,6 @@ static void __init omap_3430sdp_init_early(void)
omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
}
-static int sdp3430_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
-8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
-5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
-4040, 3910, 3790, 3670, 3550
-};
-
-static struct twl4030_bci_platform_data sdp3430_bci_data = {
- .battery_tmp_tbl = sdp3430_batt_table,
- .tblsize = ARRAY_SIZE(sdp3430_batt_table),
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -292,14 +276,6 @@ static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
.setup = sdp3430_twl_gpio_setup,
};
-static struct twl4030_usb_data sdp3430_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_madc_platform_data sdp3430_madc_data = {
- .irq_line = 1,
-};
-
/* regulator consumer mappings */
/* ads7846 on SPI */
@@ -463,24 +439,10 @@ static struct regulator_init_data sdp3430_vpll2 = {
.consumer_supplies = sdp3430_vpll2_supplies,
};
-static struct twl4030_codec_audio_data sdp3430_audio;
-
-static struct twl4030_codec_data sdp3430_codec = {
- .audio_mclk = 26000000,
- .audio = &sdp3430_audio,
-};
-
static struct twl4030_platform_data sdp3430_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .bci = &sdp3430_bci_data,
.gpio = &sdp3430_gpio_data,
- .madc = &sdp3430_madc_data,
.keypad = &sdp3430_kp_data,
- .usb = &sdp3430_usb_data,
- .codec = &sdp3430_codec,
.vaux1 = &sdp3430_vaux1,
.vaux2 = &sdp3430_vaux2,
@@ -496,7 +458,11 @@ static struct twl4030_platform_data sdp3430_twldata = {
static int __init omap3430_i2c_init(void)
{
/* i2c1 for PMIC only */
+ omap3_pmic_get_config(&sdp3430_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+ TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_CODEC, 0);
omap3_pmic_init("twl4030", &sdp3430_twldata);
+
/* i2c2 on camera connector (for sensor control) and optional isp1301 */
omap_register_i2c_bus(2, 400, NULL, 0);
/* i2c3 on display connector (for DVI, tfp410) */
@@ -412,10 +412,6 @@ static struct regulator_init_data cm_t35_vpll2 = {
.consumer_supplies = &cm_t35_vdvi_supply,
};
-static struct twl4030_usb_data cm_t35_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static uint32_t cm_t35_keymap[] = {
KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT),
KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN),
@@ -498,12 +494,8 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
};
static struct twl4030_platform_data cm_t35_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.keypad = &cm_t35_kp_data,
- .usb = &cm_t35_usb_data,
.gpio = &cm_t35_gpio_data,
.vmmc1 = &cm_t35_vmmc1,
.vsim = &cm_t35_vsim,
@@ -513,6 +505,7 @@ static struct twl4030_platform_data cm_t35_twldata = {
static void __init cm_t35_init_i2c(void)
{
+ omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, 0);
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
@@ -333,25 +333,9 @@ static struct regulator_init_data devkit8000_vio = {
.consumer_supplies = &devkit8000_vio_supply,
};
-static struct twl4030_usb_data devkit8000_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data devkit8000_audio_data;
-
-static struct twl4030_codec_data devkit8000_codec_data = {
- .audio_mclk = 26000000,
- .audio = &devkit8000_audio_data,
-};
-
static struct twl4030_platform_data devkit8000_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .usb = &devkit8000_usb_data,
.gpio = &devkit8000_gpio_data,
- .codec = &devkit8000_codec_data,
.vmmc1 = &devkit8000_vmmc1,
.vdac = &devkit8000_vdac,
.vpll1 = &devkit8000_vpll1,
@@ -361,6 +345,8 @@ static struct twl4030_platform_data devkit8000_twldata = {
static int __init devkit8000_i2c_init(void)
{
+ omap3_pmic_get_config(&devkit8000_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_CODEC, 0);
omap3_pmic_init("tps65930", &devkit8000_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
@@ -440,10 +440,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
.setup = igep_twl_gpio_setup,
};
-static struct twl4030_usb_data igep_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static int igep2_enable_dvi(struct omap_dss_device *dssdev)
{
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
@@ -519,13 +515,6 @@ static void __init igep_init_early(void)
m65kxxxxam_sdrc_params);
}
-static struct twl4030_codec_audio_data igep2_audio_data;
-
-static struct twl4030_codec_data igep2_codec_data = {
- .audio_mclk = 26000000,
- .audio = &igep2_audio_data,
-};
-
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -558,11 +547,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = {
};
static struct twl4030_platform_data igep_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .usb = &igep_usb_data,
.gpio = &igep_twl4030_gpio_pdata,
.vmmc1 = &igep_vmmc1,
.vio = &igep_vio,
@@ -578,6 +563,8 @@ static void __init igep_i2c_init(void)
{
int ret;
+ omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
+
if (machine_is_igep0020()) {
/*
* Bus 3 is attached to the DVI port where devices like the
@@ -588,9 +575,10 @@ static void __init igep_i2c_init(void)
if (ret)
pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
- igep_twldata.codec = &igep2_codec_data;
igep_twldata.keypad = &igep2_keypad_pdata;
igep_twldata.vpll2 = &igep2_vpll2;
+ /* Use common codec data */
+ omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_CODEC, 0);
}
omap3_pmic_init("twl4030", &igep_twldata);
@@ -199,20 +199,12 @@ static void __init omap_ldp_init_early(void)
omap2_init_common_devices(NULL, NULL);
}
-static struct twl4030_usb_data ldp_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
};
-static struct twl4030_madc_platform_data ldp_madc_data = {
- .irq_line = 1,
-};
-
static struct regulator_consumer_supply ldp_vmmc1_supply = {
.supply = "vmmc",
};
@@ -253,12 +245,7 @@ static struct regulator_init_data ldp_vaux1 = {
};
static struct twl4030_platform_data ldp_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .madc = &ldp_madc_data,
- .usb = &ldp_usb_data,
.vmmc1 = &ldp_vmmc1,
.vaux1 = &ldp_vaux1,
.gpio = &ldp_gpio_data,
@@ -267,6 +254,8 @@ static struct twl4030_platform_data ldp_twldata = {
static int __init omap_i2c_init(void)
{
+ omap3_pmic_get_config(&ldp_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
omap3_pmic_init("twl4030", &ldp_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
@@ -383,25 +383,9 @@ static struct regulator_init_data beagle_vpll2 = {
.consumer_supplies = beagle_vdvi_supplies,
};
-static struct twl4030_usb_data beagle_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data beagle_audio_data;
-
-static struct twl4030_codec_data beagle_codec_data = {
- .audio_mclk = 26000000,
- .audio = &beagle_audio_data,
-};
-
static struct twl4030_platform_data beagle_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
- .codec = &beagle_codec_data,
.vmmc1 = &beagle_vmmc1,
.vsim = &beagle_vsim,
.vdac = &beagle_vdac,
@@ -416,6 +400,8 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
static int __init omap3_beagle_i2c_init(void)
{
+ omap3_pmic_get_config(&beagle_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_CODEC, 0);
omap3_pmic_init("twl4030", &beagle_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
@@ -400,10 +400,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
.setup = omap3evm_twl_gpio_setup,
};
-static struct twl4030_usb_data omap3evm_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
@@ -438,17 +434,6 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
.rep = 1,
};
-static struct twl4030_madc_platform_data omap3evm_madc_data = {
- .irq_line = 1,
-};
-
-static struct twl4030_codec_audio_data omap3evm_audio_data;
-
-static struct twl4030_codec_data omap3evm_codec_data = {
- .audio_mclk = 26000000,
- .audio = &omap3evm_audio_data,
-};
-
static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
@@ -548,15 +533,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
#endif
static struct twl4030_platform_data omap3evm_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
- .madc = &omap3evm_madc_data,
- .usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
- .codec = &omap3evm_codec_data,
.vdac = &omap3_evm_vdac,
.vpll2 = &omap3_evm_vpll2,
.vio = &omap3evm_vio,
@@ -566,6 +545,9 @@ static struct twl4030_platform_data omap3evm_twldata = {
static int __init omap3_evm_i2c_init(void)
{
+ omap3_pmic_get_config(&omap3evm_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+ TWL_COMMON_PDATA_CODEC, 0);
omap3_pmic_init("twl4030", &omap3evm_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
@@ -502,25 +502,10 @@ static struct platform_device pandora_vwlan_device = {
},
};
-static struct twl4030_usb_data omap3pandora_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data omap3pandora_audio_data;
-
-static struct twl4030_codec_data omap3pandora_codec_data = {
- .audio_mclk = 26000000,
- .audio = &omap3pandora_audio_data,
-};
-
static struct twl4030_bci_platform_data pandora_bci_data;
static struct twl4030_platform_data omap3pandora_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
.gpio = &omap3pandora_gpio_data,
- .usb = &omap3pandora_usb_data,
- .codec = &omap3pandora_codec_data,
.vmmc1 = &pandora_vmmc1,
.vmmc2 = &pandora_vmmc2,
.vdac = &pandora_vdac,
@@ -542,6 +527,8 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
static int __init omap3pandora_i2c_init(void)
{
+ omap3_pmic_get_config(&omap3pandora_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_CODEC, 0);
omap3_pmic_init("tps65950", &omap3pandora_twldata);
/* i2c2 pins are not connected */
omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
@@ -354,10 +354,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
.setup = omap3stalker_twl_gpio_setup,
};
-static struct twl4030_usb_data omap3stalker_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
@@ -392,17 +388,6 @@ static struct twl4030_keypad_data omap3stalker_kp_data = {
.rep = 1,
};
-static struct twl4030_madc_platform_data omap3stalker_madc_data = {
- .irq_line = 1,
-};
-
-static struct twl4030_codec_audio_data omap3stalker_audio_data;
-
-static struct twl4030_codec_data omap3stalker_codec_data = {
- .audio_mclk = 26000000,
- .audio = &omap3stalker_audio_data,
-};
-
static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
@@ -443,15 +428,9 @@ static struct regulator_init_data omap3_stalker_vpll2 = {
};
static struct twl4030_platform_data omap3stalker_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.keypad = &omap3stalker_kp_data,
- .madc = &omap3stalker_madc_data,
- .usb = &omap3stalker_usb_data,
.gpio = &omap3stalker_gpio_data,
- .codec = &omap3stalker_codec_data,
.vdac = &omap3_stalker_vdac,
.vpll2 = &omap3_stalker_vpll2,
.vmmc1 = &omap3stalker_vmmc1,
@@ -474,6 +453,9 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
static int __init omap3_stalker_i2c_init(void)
{
+ omap3_pmic_get_config(&omap3stalker_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+ TWL_COMMON_PDATA_CODEC, 0);
omap3_pmic_init("twl4030", &omap3stalker_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
@@ -238,25 +238,9 @@ static struct regulator_init_data touchbook_vpll2 = {
.consumer_supplies = &touchbook_vdvi_supply,
};
-static struct twl4030_usb_data touchbook_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data touchbook_audio_data;
-
-static struct twl4030_codec_data touchbook_codec_data = {
- .audio_mclk = 26000000,
- .audio = &touchbook_audio_data,
-};
-
static struct twl4030_platform_data touchbook_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .usb = &touchbook_usb_data,
.gpio = &touchbook_gpio_data,
- .codec = &touchbook_codec_data,
.vmmc1 = &touchbook_vmmc1,
.vsim = &touchbook_vsim,
.vdac = &touchbook_vdac,
@@ -272,8 +256,9 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
static int __init omap3_touchbook_i2c_init(void)
{
/* Standard TouchBook bus */
+ omap3_pmic_get_config(&touchbook_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_CODEC, 0);
omap3_pmic_init("twl4030", &touchbook_twldata);
-
/* Additional TouchBook bus */
omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
ARRAY_SIZE(touchBook_i2c_boardinfo));
@@ -435,10 +435,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = {
.setup = overo_twl_gpio_setup,
};
-static struct twl4030_usb_data overo_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct regulator_init_data overo_vmmc1 = {
.constraints = {
.min_uV = 1850000,
@@ -482,19 +478,8 @@ static struct regulator_init_data overo_vpll2 = {
.consumer_supplies = overo_vdds_dsi_supply,
};
-static struct twl4030_codec_audio_data overo_audio_data;
-
-static struct twl4030_codec_data overo_codec_data = {
- .audio_mclk = 26000000,
- .audio = &overo_audio_data,
-};
-
static struct twl4030_platform_data overo_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
- .usb = &overo_usb_data,
- .codec = &overo_codec_data,
.vmmc1 = &overo_vmmc1,
.vdac = &overo_vdac,
.vpll2 = &overo_vpll2,
@@ -502,6 +487,8 @@ static struct twl4030_platform_data overo_twldata = {
static int __init overo_i2c_init(void)
{
+ omap3_pmic_get_config(&overo_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_CODEC, 0);
omap3_pmic_init("tps65950", &overo_twldata);
/* i2c2 pins are used for gpio */
omap_register_i2c_bus(3, 400, NULL, 0);
@@ -79,20 +79,14 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = {
.pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
};
-static struct twl4030_usb_data rm680_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct twl4030_platform_data rm680_twl_data = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
.gpio = &rm680_gpio_data,
- .usb = &rm680_usb_data,
/* add rest of the children here */
};
static void __init rm680_i2c_init(void)
{
+ omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
@@ -288,10 +288,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
.rep = 1,
};
-static struct twl4030_madc_platform_data rx51_madc_data = {
- .irq_line = 1,
-};
-
/* Enable input logic and pull all lines up when eMMC is on. */
static struct omap_board_mux rx51_mmc2_on_mux[] = {
OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
@@ -599,10 +595,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
.setup = rx51_twlgpio_setup,
};
-static struct twl4030_usb_data rx51_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct twl4030_ins sleep_on_seq[] __initdata = {
/*
* Turn off everything
@@ -774,14 +766,9 @@ struct twl4030_codec_data rx51_codec_data __initdata = {
};
static struct twl4030_platform_data rx51_twldata __initdata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
- .madc = &rx51_madc_data,
- .usb = &rx51_usb_data,
.power = &rx51_t2scripts_data,
.codec = &rx51_codec_data,
@@ -846,6 +833,8 @@ static int __init rx51_i2c_init(void)
rx51_twldata.vaux3 = &rx51_vaux3_cam;
}
rx51_twldata.vmmc2 = &rx51_vmmc2;
+ omap3_pmic_get_config(&rx51_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
@@ -292,26 +292,6 @@ static void zoom2_set_hs_extmute(int mute)
gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
}
-static int zoom_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
-8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
-5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
-4040, 3910, 3790, 3670, 3550
-};
-
-static struct twl4030_bci_platform_data zoom_bci_data = {
- .battery_tmp_tbl = zoom_batt_table,
- .tblsize = ARRAY_SIZE(zoom_batt_table),
-};
-
-static struct twl4030_usb_data zoom_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct twl4030_gpio_platform_data zoom_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
@@ -319,28 +299,10 @@ static struct twl4030_gpio_platform_data zoom_gpio_data = {
.setup = zoom_twl_gpio_setup,
};
-static struct twl4030_madc_platform_data zoom_madc_data = {
- .irq_line = 1,
-};
-
-static struct twl4030_codec_audio_data zoom_audio_data;
-
-static struct twl4030_codec_data zoom_codec_data = {
- .audio_mclk = 26000000,
- .audio = &zoom_audio_data,
-};
-
static struct twl4030_platform_data zoom_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .bci = &zoom_bci_data,
- .madc = &zoom_madc_data,
- .usb = &zoom_usb_data,
.gpio = &zoom_gpio_data,
.keypad = &zoom_kp_twl4030_data,
- .codec = &zoom_codec_data,
.vmmc1 = &zoom_vmmc1,
.vmmc2 = &zoom_vmmc2,
.vsim = &zoom_vsim,
@@ -350,10 +312,17 @@ static struct twl4030_platform_data zoom_twldata = {
static int __init omap_i2c_init(void)
{
+ omap3_pmic_get_config(&zoom_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+ TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_CODEC, 0);
+
if (machine_is_omap_zoom2()) {
- zoom_audio_data.ramp_delay_value = 3; /* 161 ms */
- zoom_audio_data.hs_extmute = 1;
- zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
+ struct twl4030_codec_audio_data *audio_data;
+ audio_data = zoom_twldata.codec->audio;
+
+ audio_data->ramp_delay_value = 3; /* 161 ms */
+ audio_data->hs_extmute = 1;
+ audio_data->set_hs_extmute = zoom2_set_hs_extmute;
}
omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
@@ -56,6 +56,37 @@ static struct twl4030_usb_data omap4_usb_pdata = {
.phy_suspend = omap4430_phy_suspend,
};
+static struct twl4030_usb_data omap3_usb_pdata = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static int omap3_batt_table[] = {
+/* 0 C */
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
+8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
+5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
+4040, 3910, 3790, 3670, 3550
+};
+
+static struct twl4030_bci_platform_data omap3_bci_pdata = {
+ .battery_tmp_tbl = omap3_batt_table,
+ .tblsize = ARRAY_SIZE(omap3_batt_table),
+};
+
+static struct twl4030_madc_platform_data omap3_madc_pdata = {
+ .irq_line = 1,
+};
+
+static struct twl4030_codec_audio_data omap3_audio;
+
+static struct twl4030_codec_data omap3_codec_pdata = {
+ .audio_mclk = 26000000,
+ .audio = &omap3_audio,
+};
+
static struct regulator_init_data omap4_vdac_idata = {
.constraints = {
.min_uV = 1800000,
@@ -207,3 +238,25 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
!pmic_data->clk32kg)
pmic_data->clk32kg = &omap4_clk32kg_idata;
}
+
+void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
+ u32 pdata_flags, u32 regulators_flags)
+{
+ if (!pmic_data->irq_base)
+ pmic_data->irq_base = TWL4030_IRQ_BASE;
+ if (!pmic_data->irq_end)
+ pmic_data->irq_end = TWL4030_IRQ_END;
+
+ /* Common platform data configurations */
+ if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
+ pmic_data->usb = &omap3_usb_pdata;
+
+ if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
+ pmic_data->bci = &omap3_bci_pdata;
+
+ if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
+ pmic_data->madc = &omap3_madc_pdata;
+
+ if (pdata_flags & TWL_COMMON_PDATA_CODEC && !pmic_data->codec)
+ pmic_data->codec = &omap3_codec_pdata;
+}
@@ -2,6 +2,9 @@
#define __OMAP_PMIC_COMMON__
#define TWL_COMMON_PDATA_USB (1 << 0)
+#define TWL_COMMON_PDATA_BCI (1 << 1)
+#define TWL_COMMON_PDATA_MADC (1 << 2)
+#define TWL_COMMON_PDATA_CODEC (1 << 3)
/* Common LDO regulators for TWL4030/TWL6030 */
#define TWL_COMMON_REGULATOR_VDAC (1 << 0)
@@ -42,6 +45,9 @@ static inline void omap4_pmic_init(const char *pmic_type,
omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
}
+void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
+ u32 pdata_flags, u32 regulators_flags);
+
void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);
Reduce the amount of duplicated code by moving the common configuration for twl4030/5030/tpsxx to the pmic-common file. Use the omap3_pmic_config function from board files to properly configure the PMIC with the common fields. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- arch/arm/mach-omap2/board-3430sdp.c | 42 ++------------------ arch/arm/mach-omap2/board-cm-t35.c | 9 +---- arch/arm/mach-omap2/board-devkit8000.c | 18 +-------- arch/arm/mach-omap2/board-igep0020.c | 20 ++-------- arch/arm/mach-omap2/board-ldp.c | 15 +------ arch/arm/mach-omap2/board-omap3beagle.c | 18 +-------- arch/arm/mach-omap2/board-omap3evm.c | 24 +---------- arch/arm/mach-omap2/board-omap3pandora.c | 17 +------- arch/arm/mach-omap2/board-omap3stalker.c | 24 +---------- arch/arm/mach-omap2/board-omap3touchbook.c | 19 +-------- arch/arm/mach-omap2/board-overo.c | 17 +------- arch/arm/mach-omap2/board-rm680.c | 8 +--- arch/arm/mach-omap2/board-rx51-peripherals.c | 15 +------ arch/arm/mach-omap2/board-zoom-peripherals.c | 51 +++++-------------------- arch/arm/mach-omap2/pmic-common.c | 53 ++++++++++++++++++++++++++ arch/arm/mach-omap2/pmic-common.h | 6 +++ 16 files changed, 99 insertions(+), 257 deletions(-)