diff mbox

input: touchscreen: add OF match table for ads7846

Message ID 1307672920-6261-1-git-send-email-Baohua.Song@csr.com (mailing list archive)
State New, archived
Headers show

Commit Message

Barry Song June 10, 2011, 2:28 a.m. UTC
The current ads7846 has no OF match table. The method used is by applying a heuristic (of_modalias_node) which tries to name the device in a way that will match an existing device driver.
This patch adds explicit OF match table for ads7846, then the normal device tree match behaviour will always work.
It has been tested on PRIMA2 EVB board of CSR with a SPI's child node like the below:
ts@0 {
	compatible = "ti,ads7845";
	reg = <0x0>;
	spi-max-frequency = <31250>;
        interrupts = <90>;
};

Signed-off-by: Barry Song <21cnbao@gmail.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
cc: Thomas Chou <thomas@wytron.com.tw>
---
 drivers/input/touchscreen/ads7846.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

Comments

Grant Likely June 13, 2011, 5:15 a.m. UTC | #1
On Thu, Jun 9, 2011 at 8:28 PM, Barry Song <Baohua.Song@csr.com> wrote:
> The current ads7846 has no OF match table. The method used is by applying a heuristic (of_modalias_node) which tries to name the device in a way that will match an existing device driver.
> This patch adds explicit OF match table for ads7846, then the normal device tree match behaviour will always work.
> It has been tested on PRIMA2 EVB board of CSR with a SPI's child node like the below:
> ts@0 {
>        compatible = "ti,ads7845";
>        reg = <0x0>;
>        spi-max-frequency = <31250>;
>        interrupts = <90>;
> };
>
> Signed-off-by: Barry Song <21cnbao@gmail.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> cc: Thomas Chou <thomas@wytron.com.tw>
> ---
>  drivers/input/touchscreen/ads7846.c |   14 ++++++++++++++

There should also be documentation for the new binding added to
Documentation/devicetree/bindings for the new compatible strings.

>  1 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
> index 5196861..643138b 100644
> --- a/drivers/input/touchscreen/ads7846.c
> +++ b/drivers/input/touchscreen/ads7846.c
> @@ -28,6 +28,7 @@
>  #include <linux/slab.h>
>  #include <linux/pm.h>
>  #include <linux/gpio.h>
> +#include <linux/of.h>
>  #include <linux/spi/spi.h>
>  #include <linux/spi/ads7846.h>
>  #include <linux/regulator/consumer.h>
> @@ -1425,12 +1426,25 @@ static int __devexit ads7846_remove(struct spi_device *spi)
>        return 0;
>  }
>
> +#if defined(CONFIG_OF)
> +static struct of_device_id ads7846_spi_of_match_table[] __devinitdata = {
> +       { .compatible = "ti,ads7846", },
> +       { .compatible = "ti,ads7845", },
> +       { .compatible = "ti,ads7843", },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, ads7846_spi_of_match_table);

#else
#define ads7846_spi_of_match_table NULL

> +#endif
> +
>  static struct spi_driver ads7846_driver = {
>        .driver = {
>                .name   = "ads7846",
>                .bus    = &spi_bus_type,
>                .owner  = THIS_MODULE,
>                .pm     = &ads7846_pm,
> +#if defined(CONFIG_OF)
> +               .of_match_table = ads7846_spi_of_match_table,
> +#endif

With the #else  block added above, you can drop the #if/#endif
protection around of_match_table.

Otherwise:

Acked-by: Grant Likely <grant.likely@secretlab.ca>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Barry Song June 13, 2011, 8:15 a.m. UTC | #2
Hi Grant,
Thanks.

2011/6/13 Grant Likely <grant.likely@secretlab.ca>:
> On Thu, Jun 9, 2011 at 8:28 PM, Barry Song <Baohua.Song@csr.com> wrote:
>> The current ads7846 has no OF match table. The method used is by applying a heuristic (of_modalias_node) which tries to name the device in a way that will match an existing device driver.
>> This patch adds explicit OF match table for ads7846, then the normal device tree match behaviour will always work.
>> It has been tested on PRIMA2 EVB board of CSR with a SPI's child node like the below:
>> ts@0 {
>>        compatible = "ti,ads7845";
>>        reg = <0x0>;
>>        spi-max-frequency = <31250>;
>>        interrupts = <90>;
>> };
>>
>> Signed-off-by: Barry Song <21cnbao@gmail.com>
>> Cc: Grant Likely <grant.likely@secretlab.ca>
>> cc: Thomas Chou <thomas@wytron.com.tw>
>> ---
>>  drivers/input/touchscreen/ads7846.c |   14 ++++++++++++++
>
> There should also be documentation for the new binding added to
> Documentation/devicetree/bindings for the new compatible strings.

Which directory do you think is the best to place this document? or do
we build a new diretory named
Documentation/devicetree/bindings/input/touchscreen/ ?
The dir Documentation/devicetree/bindings seems to be for spi host,
not for spi clients.

>
>>  1 files changed, 14 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
>> index 5196861..643138b 100644
>> --- a/drivers/input/touchscreen/ads7846.c
>> +++ b/drivers/input/touchscreen/ads7846.c
>> @@ -28,6 +28,7 @@
>>  #include <linux/slab.h>
>>  #include <linux/pm.h>
>>  #include <linux/gpio.h>
>> +#include <linux/of.h>
>>  #include <linux/spi/spi.h>
>>  #include <linux/spi/ads7846.h>
>>  #include <linux/regulator/consumer.h>
>> @@ -1425,12 +1426,25 @@ static int __devexit ads7846_remove(struct spi_device *spi)
>>        return 0;
>>  }
>>
>> +#if defined(CONFIG_OF)
>> +static struct of_device_id ads7846_spi_of_match_table[] __devinitdata = {
>> +       { .compatible = "ti,ads7846", },
>> +       { .compatible = "ti,ads7845", },
>> +       { .compatible = "ti,ads7843", },
>> +       {},
>> +};
>> +MODULE_DEVICE_TABLE(of, ads7846_spi_of_match_table);
>
> #else
> #define ads7846_spi_of_match_table NULL
>
>> +#endif
>> +
>>  static struct spi_driver ads7846_driver = {
>>        .driver = {
>>                .name   = "ads7846",
>>                .bus    = &spi_bus_type,
>>                .owner  = THIS_MODULE,
>>                .pm     = &ads7846_pm,
>> +#if defined(CONFIG_OF)
>> +               .of_match_table = ads7846_spi_of_match_table,
>> +#endif
>
> With the #else  block added above, you can drop the #if/#endif
> protection around of_match_table.

ok. thanks

>
> Otherwise:
>
> Acked-by: Grant Likely <grant.likely@secretlab.ca>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Grant Likely June 13, 2011, 1:24 p.m. UTC | #3
On Mon, Jun 13, 2011 at 2:15 AM, Barry Song <21cnbao@gmail.com> wrote:
> Hi Grant,
> Thanks.
>
> 2011/6/13 Grant Likely <grant.likely@secretlab.ca>:
>> On Thu, Jun 9, 2011 at 8:28 PM, Barry Song <Baohua.Song@csr.com> wrote:
>>> The current ads7846 has no OF match table. The method used is by applying a heuristic (of_modalias_node) which tries to name the device in a way that will match an existing device driver.
>>> This patch adds explicit OF match table for ads7846, then the normal device tree match behaviour will always work.
>>> It has been tested on PRIMA2 EVB board of CSR with a SPI's child node like the below:
>>> ts@0 {
>>>        compatible = "ti,ads7845";
>>>        reg = <0x0>;
>>>        spi-max-frequency = <31250>;
>>>        interrupts = <90>;
>>> };
>>>
>>> Signed-off-by: Barry Song <21cnbao@gmail.com>
>>> Cc: Grant Likely <grant.likely@secretlab.ca>
>>> cc: Thomas Chou <thomas@wytron.com.tw>
>>> ---
>>>  drivers/input/touchscreen/ads7846.c |   14 ++++++++++++++
>>
>> There should also be documentation for the new binding added to
>> Documentation/devicetree/bindings for the new compatible strings.
>
> Which directory do you think is the best to place this document? or do
> we build a new diretory named
> Documentation/devicetree/bindings/input/touchscreen/ ?
> The dir Documentation/devicetree/bindings seems to be for spi host,
> not for spi clients.

Documentation/devicetree/bindings/input sounds appropriate.

g.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 5196861..643138b 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -28,6 +28,7 @@ 
 #include <linux/slab.h>
 #include <linux/pm.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/consumer.h>
@@ -1425,12 +1426,25 @@  static int __devexit ads7846_remove(struct spi_device *spi)
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static struct of_device_id ads7846_spi_of_match_table[] __devinitdata = {
+	{ .compatible = "ti,ads7846", },
+	{ .compatible = "ti,ads7845", },
+	{ .compatible = "ti,ads7843", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ads7846_spi_of_match_table);
+#endif
+
 static struct spi_driver ads7846_driver = {
 	.driver = {
 		.name	= "ads7846",
 		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
 		.pm	= &ads7846_pm,
+#if defined(CONFIG_OF)
+		.of_match_table = ads7846_spi_of_match_table,
+#endif
 	},
 	.probe		= ads7846_probe,
 	.remove		= __devexit_p(ads7846_remove),