new file mode 100644
@@ -0,0 +1,80 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 header.
+ * Copyright (c) 2007 - 2010, Synaptics Incorporated
+ *
+ * For every RMI4 function that has a data source - like 2D sensors,
+ * buttons, LEDs, GPIOs, etc. - the user will create a new rmi_function_xx.c
+ * file and add these functions to perform the config(), init(), report()
+ * and detect() functionality. The function pointers are then srored under
+ * the RMI function info and these functions will automatically be called by
+ * the global config(), init(), report() and detect() functions that will
+ * loop through all data sources and call the data sources functions using
+ * these functions pointed to by the function ptrs.
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#if !defined(_RMI_F11_H)
+#define _RMI_F11_H
+
+/* This is the data read from the F11 query registers.
+ */
+struct rmi_F11_device_query {
+ bool has_query_9;
+ unsigned char number_of_sensors;
+};
+
+struct rmi_F11_sensor_query {
+ bool configurable;
+ bool has_sensitivity_adjust;
+ bool has_gestures;
+ bool has_absolute;
+ bool has_relative;
+ unsigned char number_of_fingers;
+ unsigned char number_of_X_electrodes;
+ unsigned char number_of_Y_electrodes;
+ unsigned char maximum_electrodes;
+ bool has_anchored_finger;
+ unsigned char abs_data_size;
+};
+
+struct rmi_F11_control {
+ bool relative_ballistics;
+ bool relative_position_filter;
+ bool absolute_position_filter;
+ unsigned char reporting_mode;
+ bool manually_tracked_finger;
+ bool manually_tracked_finger_enable;
+ unsigned char motion_sensitivity;
+ unsigned char palm_detect_threshold;
+ unsigned char delta_X_pos_threshold;
+ unsigned char delta_Y_pos_threshold;
+ unsigned char velocity;
+ unsigned char acceleration;
+ unsigned short sensor_max_X_pos;
+ unsigned short sensor_max_Y_pos;
+};
+
+void FN_11_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int asserted_IRQs);
+int FN_11_config(struct rmi_function_info *rmifninfo);
+int FN_11_init(struct rmi_function_device *function_device);
+int FN_11_detect(struct rmi_function_info *rmifninfo);
+/* No attention function for Fn $11 */
+#endif
new file mode 100644
@@ -0,0 +1,962 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 support for 2D.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include "rmi.h"
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+#include "rmi_f11.h"
+#include "rmi_platformdata.h"
+
+/* By default, we'll support two fingers if we can't figure out how many we
+ * really need to handle.
+ */
+#define DEFAULT_NR_OF_FINGERS 2
+
+struct f11_instance_data {
+ struct rmi_F11_device_query *device_info;
+ struct rmi_F11_sensor_query *sensor_info;
+ struct rmi_F11_control *control_registers;
+ unsigned char finger_data_buffer_size;
+ unsigned char abs_data_offset;
+ unsigned char abs_data_size;
+ unsigned char rel_data_offset;
+ unsigned char gesture_data_offset;
+ unsigned char *finger_data_buffer;
+ /* Last X & Y seen, needed at finger lift. Was down indicates
+ * at least one finger was here. TODO: Eventually we'll need to
+ * track this info on a per finger basis. */
+ bool wasdown;
+ unsigned int old_X;
+ unsigned int old_Y;
+ /* Transformations to be applied to coordinates before reporting. */
+ bool flip_X;
+ bool flip_Y;
+ int offset_X;
+ int offset_Y;
+ int clip_X_low;
+ int clip_X_high;
+ int clip_Y_low;
+ int clip_Y_high;
+ bool swap_axes;
+ bool rel_report_enabled;
+};
+
+enum f11_finger_state {
+ F11_NO_FINGER = 0,
+ F11_PRESENT = 1,
+ F11_INACCURATE = 2,
+ F11_RESERVED = 3
+};
+
+static ssize_t rmi_fn_11_flip_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_flip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_11_clip_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_clip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_11_offset_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_offset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_11_swap_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_swap_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_11_relreport_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_11_relreport_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_11_maxPos_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static struct device_attribute attrs[] = {
+ __ATTR(flip, 0664,
+ rmi_fn_11_flip_show, rmi_fn_11_flip_store), /* RW attr */
+ __ATTR(clip, 0664,
+ rmi_fn_11_clip_show, rmi_fn_11_clip_store), /* RW attr */
+ __ATTR(offset, 0664,
+ rmi_fn_11_offset_show, rmi_fn_11_offset_store), /* RW attr */
+ __ATTR(swap, 0664,
+ rmi_fn_11_swap_show, rmi_fn_11_swap_store), /* RW attr */
+ __ATTR(relreport, 0664,
+ rmi_fn_11_relreport_show, rmi_fn_11_relreport_store), /* RW */
+ __ATTR(maxPos, 0444,
+ rmi_fn_11_maxPos_show, rmi_store_error) /* R0 attr */
+};
+
+static void FN_11_relreport(struct rmi_function_info *rmifninfo);
+
+
+/* Reading and parsing the F11 query registers is a big hairy wad. There's a
+ * lot of stuff that is dependent on the presence or absence of other stuff,
+ * and there's really no tidy way to deal with it.
+ *
+ * TODO: Use more computed and #def'ed offset values.
+ */
+static int read_query_registers(struct rmi_function_info *rmifninfo)
+{
+ int retval = 0;
+ struct f11_instance_data *instance_data = rmifninfo->fndata;
+ unsigned char query_buffer[12]; /* TODO: Compute size correctly. */
+ unsigned char abs_data_size;
+ int has_pinch, has_flick, has_tap;
+ int has_tap_and_hold, has_double_tap;
+ int has_early_tap, has_press;
+ int has_palm_detect, has_rotate;
+ int has_relative;
+ unsigned char f11_egr_0, f11_egr_1;
+ unsigned int all_data_block_size;
+
+ /* need to get number of fingers supported, data size, etc. -
+ * to be used when getting data since the number of registers to
+ * read depends on the number of fingers supported and data size. */
+ retval = rmi_read_multiple(rmifninfo->sensor,
+ rmifninfo->function_descriptor.query_base_addr,
+ query_buffer, sizeof(query_buffer));
+ if (retval) {
+ pr_err("%s:Could not read F11 query registers 0x%04x\n",
+ __func__,
+ rmifninfo->function_descriptor.query_base_addr);
+ return retval;
+ }
+
+ /* Extract device data. */
+ instance_data->device_info->has_query_9 = (query_buffer[0] & 0x04) != 0;
+ instance_data->device_info->number_of_sensors =
+ (query_buffer[0] & 0x07) + 1;
+ pr_debug("%s: F11 device - %d sensors. Query 9? %d.", __func__,
+ instance_data->device_info->number_of_sensors,
+ instance_data->device_info->has_query_9);
+
+ /* Extract sensor data. */
+ /* 2D data sources have only 3 bits for the number of fingers
+ * supported - so the encoding is a bit wierd. */
+ instance_data->sensor_info->number_of_fingers = DEFAULT_NR_OF_FINGERS;
+ if ((query_buffer[1] & 0x7) <= 4)
+ /* add 1 since zero based */
+ instance_data->sensor_info->number_of_fingers =
+ (query_buffer[1] & 0x7) + 1;
+ else {
+ /* a value of 5 is up to 10 fingers - 6 and 7 are reserved
+ (shouldn't get these in a normal 2D source). */
+ if ((query_buffer[1] & 0x7) == 5)
+ instance_data->sensor_info->number_of_fingers = 10;
+ }
+ instance_data->sensor_info->configurable =
+ (query_buffer[1] & 0x80) != 0;
+ instance_data->sensor_info->has_sensitivity_adjust =
+ (query_buffer[1] & 0x40) != 0;
+ instance_data->sensor_info->has_gestures =
+ (query_buffer[1] & 0x20) != 0;
+ instance_data->sensor_info->has_absolute =
+ (query_buffer[1] & 0x10) != 0;
+ instance_data->sensor_info->has_relative =
+ (query_buffer[1] & 0x08) != 0;
+ instance_data->sensor_info->abs_data_size = query_buffer[5] & 0x03;
+ pr_debug("%s: Number of fingers: %d.", __func__,
+ instance_data->sensor_info->number_of_fingers);
+
+ /* Figure out just how much data we'll need to read. */
+ instance_data->finger_data_buffer_size =
+ (instance_data->sensor_info->number_of_fingers + 3) / 4;
+ /* One each for X and Y, one for LSB for X & Y, one for W, one for Z */
+ abs_data_size = 5;
+ if (instance_data->sensor_info->abs_data_size != 0)
+ pr_warning("%s: Unrecognized abs data size %d ignored.",
+ __func__, instance_data->sensor_info->abs_data_size);
+ if (instance_data->sensor_info->has_absolute) {
+ instance_data->abs_data_size = abs_data_size;
+ instance_data->abs_data_offset =
+ instance_data->finger_data_buffer_size;
+ instance_data->finger_data_buffer_size +=
+ instance_data->sensor_info->number_of_fingers *
+ abs_data_size;
+ }
+ if (instance_data->sensor_info->has_relative) {
+ instance_data->rel_data_offset =
+ ((instance_data->sensor_info->number_of_fingers + 3)
+ / 4) +
+ /* absolute data, per finger times number of fingers */
+ (abs_data_size *
+ instance_data->sensor_info->number_of_fingers);
+ instance_data->finger_data_buffer_size +=
+ instance_data->sensor_info->number_of_fingers * 2;
+ }
+ if (instance_data->sensor_info->has_gestures) {
+ instance_data->gesture_data_offset =
+ instance_data->finger_data_buffer_size;
+ pr_warning("%s: WARNING Need to correctly compute gesture "
+ "data location.", __func__);
+ }
+
+ /* need to determine the size of data to read - this depends on
+ * conditions such as whether Relative data is reported and if Gesture
+ * data is reported. */
+ f11_egr_0 = query_buffer[7];
+ f11_egr_1 = query_buffer[8];
+
+ /* Get info about what EGR data is supported, whether it has
+ * Relative data suppo*rted, etc. */
+ has_pinch = f11_egr_0 & 0x40;
+ has_flick = f11_egr_0 & 0x10;
+ has_tap = f11_egr_0 & 0x01;
+ has_tap_and_hold = f11_egr_0 & 0x02;
+ has_double_tap = f11_egr_0 & 0x04;
+ has_early_tap = f11_egr_0 & 0x08;
+ has_press = f11_egr_0 & 0x20;
+ has_palm_detect = f11_egr_1 & 0x01;
+ has_rotate = f11_egr_1 & 0x02;
+ has_relative = query_buffer[1] & 0x08;
+
+ /* Size of all data including finger status, absolute data for each
+ * finger, relative data and EGR data */
+ all_data_block_size =
+ /* finger status, four fingers per register */
+ ((instance_data->sensor_info->number_of_fingers + 3) / 4) +
+ /* absolute data, per finger times number of fingers */
+ (abs_data_size *
+ instance_data->sensor_info->number_of_fingers) +
+ /* two relative registers (if relative is being reported) */
+ 2 * has_relative +
+ /* F11_2D_Data8 is only present if the egr_0
+ * register is non-zero. */
+ !!(f11_egr_0) +
+ /* F11_2D_Data9 is only present if either egr_0 or
+ * egr_1 registers are non-zero. */
+ (f11_egr_0 || f11_egr_1) +
+ /* F11_2D_Data10 is only present if EGR_PINCH or EGR_FLICK of
+ * egr_0 reports as 1. */
+ !!(has_pinch | has_flick) +
+ /* F11_2D_Data11 and F11_2D_Data12 are only present if
+ * EGR_FLICK of egr_0 reports as 1. */
+ 2 * !!(has_flick);
+
+ return 0;
+}
+
+/*
+ * This reads in a sample and reports the function $11 source data to the
+ * input subsystem. It is used for both polling and interrupt driven
+ * operation. This is called a lot so don't put in any informational
+ * printks since they will slow things way down!
+ */
+void FN_11_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int asserted_IRQs)
+{
+ /* number of touch points - fingers down in this case */
+ int finger_down_count;
+ int finger;
+ struct rmi_function_device *function_device;
+ struct f11_instance_data *instance_data = rmifninfo->fndata;
+ int retval;
+
+ finger_down_count = 0;
+ function_device = rmifninfo->function_device;
+
+ /* get 2D sensor finger data */
+ retval =
+ rmi_read_multiple(rmifninfo->sensor,
+ rmifninfo->function_descriptor.data_base_addr,
+ instance_data->finger_data_buffer,
+ instance_data->finger_data_buffer_size);
+ if (retval) {
+ pr_err("%s: Failed to read finger data registers, code=%d.\n",
+ __func__, retval);
+ return;
+ }
+
+ /* First we need to count the fingers and generate some events
+ * related to that. */
+ for (finger = 0; finger < instance_data->sensor_info->number_of_fingers;
+ finger++) {
+ int reg = finger / 4; /* Which data byte has finger status */
+ int finger_shift = (finger % 4) * 2; /* Where in the byte? */
+ int finger_status =
+ (instance_data->
+ finger_data_buffer[reg] >> finger_shift) & 0x03;
+
+ if (finger_status == F11_PRESENT
+ || finger_status == F11_INACCURATE) {
+ finger_down_count++;
+ instance_data->wasdown = true;
+ }
+ }
+ input_report_key(function_device->input, BTN_TOUCH, finger_down_count);
+ for (finger = 0;
+ finger < (instance_data->sensor_info->number_of_fingers - 1);
+ finger++)
+ input_report_key(function_device->input, BTN_2 + finger,
+ finger_down_count >= (finger + 2));
+
+ for (finger = 0; finger < instance_data->sensor_info->number_of_fingers;
+ finger++) {
+ int reg;
+ int finger_shift;
+ int finger_status;
+ int X = 0, Y = 0, Z = 0, Wy = 0, Wx = 0;
+
+ /* determine which data byte the finger status is in */
+ reg = finger / 4;
+ /* bit shift to get finger's status */
+ finger_shift = (finger % 4) * 2;
+ finger_status =
+ (instance_data->finger_data_buffer[reg] >> finger_shift)
+ & 0x03;
+
+ /* if finger status indicates a finger is present then
+ extract the finger data and report it */
+ if (finger_status == F11_PRESENT
+ || finger_status == F11_INACCURATE) {
+
+ if (instance_data->sensor_info->has_absolute) {
+ int maxX =
+ instance_data->control_registers->
+ sensor_max_X_pos;
+ int maxY =
+ instance_data->control_registers->
+ sensor_max_Y_pos;
+ reg =
+ instance_data->abs_data_offset +
+ (finger * instance_data->abs_data_size);
+ X = (instance_data->
+ finger_data_buffer[reg] << 4) & 0x0ff0;
+ X |= (instance_data->
+ finger_data_buffer[reg + 2] & 0x0f);
+ Y = (instance_data->
+ finger_data_buffer[reg + 1] << 4) & 0x0ff0;
+ Y |= ((instance_data->
+ finger_data_buffer[reg +
+ 2] & 0xf0) >> 4) & 0x0f;
+ /* First thing to do is swap axes if needed.
+ */
+ if (instance_data->swap_axes) {
+ int temp = X;
+ X = Y;
+ Y = temp;
+ maxX =
+ instance_data->control_registers->
+ sensor_max_Y_pos;
+ maxY =
+ instance_data->control_registers->
+ sensor_max_X_pos;
+ }
+ if (instance_data->flip_X)
+ X = max(maxX - X, 0);
+ X = X - instance_data->offset_X;
+ X = min(max(X, instance_data->clip_X_low),
+ instance_data->clip_X_high);
+ if (instance_data->flip_Y)
+ Y = max(maxY - Y, 0);
+ Y = Y - instance_data->offset_Y;
+ Y = min(max(Y, instance_data->clip_Y_low),
+ instance_data->clip_Y_high);
+
+ /* upper 4 bits of W are Wy,
+ lower 4 of W are Wx */
+ Wy = (instance_data->
+ finger_data_buffer[reg + 3] >> 4) & 0x0f;
+ Wx = instance_data->finger_data_buffer[reg +
+ 3] & 0x0f;
+ if (instance_data->swap_axes) {
+ int temp = Wx;
+ Wx = Wy;
+ Wy = temp;
+ }
+
+ Z = instance_data->finger_data_buffer[reg + 4];
+
+ /* if this is the first finger report normal
+ * ABS_X, ABS_Y, PRESSURE, TOOL_WIDTH events for
+ * non-MT apps. Apps that support Multi-touch
+ * will ignore these events and use the MT
+ * events. Apps that don't support Multi-touch
+ * will still function.
+ */
+ if (finger_down_count == 1) {
+ instance_data->old_X = X;
+ instance_data->old_Y = Y;
+ input_report_abs(function_device->input,
+ ABS_X, X);
+ input_report_abs(function_device->input,
+ ABS_Y, Y);
+ input_report_abs(function_device->input,
+ ABS_PRESSURE, Z);
+ input_report_abs(function_device->input,
+ ABS_TOOL_WIDTH,
+ max(Wx, Wy));
+ } else {
+ /* TODO generate non MT events for
+ * multifinger situation. */
+ }
+#ifdef CONFIG_SYNA_MULTI_TOUCH
+ /* Report Multi-Touch events for each finger */
+ /* major axis of touch area ellipse */
+ input_report_abs(function_device->input,
+ ABS_MT_TOUCH_MAJOR, Z);
+ /* minor axis of touch area ellipse */
+ input_report_abs(function_device->input,
+ ABS_MT_WIDTH_MAJOR, max(Wx,
+ Wy));
+ /* Currently only 2 supported - 1 or 0 */
+ input_report_abs(function_device->input,
+ ABS_MT_ORIENTATION,
+ (Wx > Wy ? 1 : 0));
+ input_report_abs(function_device->input,
+ ABS_MT_POSITION_X, X);
+ input_report_abs(function_device->input,
+ ABS_MT_POSITION_Y, Y);
+
+ /* TODO: Tracking ID needs to be reported but
+ * not used yet. Could be formed by keeping
+ * an id per position and assiging a new id
+ * when finger_status changes for that position.
+ */
+ input_report_abs(function_device->input,
+ ABS_MT_TRACKING_ID,
+ finger + 1);
+
+ /* MT sync between fingers */
+ input_mt_sync(function_device->input);
+#endif
+ }
+ }
+ }
+
+ /* if we had a finger down before and now we don't have
+ * any send a button up. */
+ if ((finger_down_count == 0) && instance_data->wasdown) {
+ instance_data->wasdown = false;
+
+#ifdef CONFIG_SYNA_MULTI_TOUCH
+ input_report_abs(function_device->input, ABS_MT_TOUCH_MAJOR, 0);
+ input_report_abs(function_device->input, ABS_MT_WIDTH_MAJOR, 0);
+ input_report_abs(function_device->input, ABS_MT_POSITION_X,
+ instance_data->old_X);
+ input_report_abs(function_device->input, ABS_MT_POSITION_Y,
+ instance_data->old_Y);
+ input_report_abs(function_device->input, ABS_MT_TRACKING_ID, 1);
+ input_mt_sync(function_device->input);
+#endif
+
+ input_report_abs(function_device->input, ABS_X,
+ instance_data->old_X);
+ input_report_abs(function_device->input, ABS_Y,
+ instance_data->old_Y);
+ instance_data->old_X = instance_data->old_Y = 0;
+ pr_debug("%s: Finger up.", __func__);
+ }
+
+ FN_11_relreport(rmifninfo);
+ input_sync(function_device->input); /* sync after groups of events */
+
+}
+EXPORT_SYMBOL(FN_11_inthandler);
+
+#define F11_MIN_RELATIVE -128
+#define F11_MAX_RELATIVE 127
+
+/* This function reads in relative data for first finger and
+ * sends it to input system */
+static void FN_11_relreport(struct rmi_function_info *rmifninfo)
+{
+ struct f11_instance_data *instance_data = rmifninfo->fndata;
+ struct rmi_function_device *function_device;
+ signed char X, Y;
+ unsigned short fn11DataBaseAddr;
+
+ if (instance_data->sensor_info->has_relative &&
+ instance_data->rel_report_enabled) {
+ int reg = instance_data->rel_data_offset;
+
+ function_device = rmifninfo->function_device;
+
+ fn11DataBaseAddr =
+ rmifninfo->function_descriptor.data_base_addr;
+ /* Read and report Rel data for primary finger
+ * one register for X and one for Y */
+ X = instance_data->finger_data_buffer[reg];
+ Y = instance_data->finger_data_buffer[reg + 1];
+ if (instance_data->swap_axes) {
+ signed char temp = X;
+ X = Y;
+ Y = temp;
+ }
+ if (instance_data->flip_X)
+ X = -X;
+ if (instance_data->flip_Y)
+ Y = -Y;
+ X = (signed char)min(F11_MAX_RELATIVE,
+ max(F11_MIN_RELATIVE, (int)X));
+ Y = (signed char)min(F11_MAX_RELATIVE,
+ max(F11_MIN_RELATIVE, (int)Y));
+
+ input_report_rel(function_device->input, REL_X, X);
+ input_report_rel(function_device->input, REL_Y, Y);
+ }
+}
+
+/* This is a stub for now, and will be expanded as this implementation
+ * evolves.
+ */
+int FN_11_config(struct rmi_function_info *rmifninfo)
+{
+ int retval = 0;
+
+ pr_debug("%s: RMI4 function $11 config\n", __func__);
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_11_config);
+
+/* This operation is done in a number of places, so we have a handy routine
+ * for it.
+ */
+static void f11_set_abs_params(struct rmi_function_device *function_device)
+{
+ struct f11_instance_data *instance_data = function_device->rfi->fndata;
+ /* Use the max X and max Y read from the device, or the clip values,
+ * whichever is stricter.
+ */
+ int xMin = instance_data->clip_X_low;
+ int xMax =
+ min((int)instance_data->control_registers->sensor_max_X_pos,
+ instance_data->clip_X_high);
+ int yMin = instance_data->clip_Y_low;
+ int yMax =
+ min((int)instance_data->control_registers->sensor_max_Y_pos,
+ instance_data->clip_Y_high);
+ if (instance_data->swap_axes) {
+ int temp = xMin;
+ xMin = yMin;
+ yMin = temp;
+ temp = xMax;
+ xMax = yMax;
+ yMax = temp;
+ }
+ pr_debug("%s: Set ranges X=[%d..%d] Y=[%d..%d].", __func__, xMin, xMax,
+ yMin, yMax);
+ input_set_abs_params(function_device->input, ABS_X, xMin, xMax, 0, 0);
+ input_set_abs_params(function_device->input, ABS_Y, yMin, yMax, 0, 0);
+ input_set_abs_params(function_device->input, ABS_PRESSURE, 0, 255, 0,
+ 0);
+ input_set_abs_params(function_device->input, ABS_TOOL_WIDTH, 0, 15, 0,
+ 0);
+
+#ifdef CONFIG_SYNA_MULTI_TOUCH
+ input_set_abs_params(function_device->input, ABS_MT_TOUCH_MAJOR, 0, 15,
+ 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_TOUCH_MINOR, 0, 15,
+ 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_ORIENTATION, 0, 1,
+ 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_TRACKING_ID, 1, 10,
+ 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_POSITION_X, xMin,
+ xMax, 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_POSITION_Y, yMin,
+ yMax, 0, 0);
+#endif
+}
+
+/* Initialize any function $11 specific params and settings - input
+ * settings, device settings, etc.
+ */
+int FN_11_init(struct rmi_function_device *function_device)
+{
+ struct f11_instance_data *instance_data = function_device->rfi->fndata;
+ int retval = 0;
+ int attr_count = 0;
+ struct rmi_f11_functiondata *functiondata =
+ rmi_sensor_get_functiondata(function_device->sensor,
+ RMI_F11_INDEX);
+ pr_debug("%s: RMI4 F11 init", __func__);
+
+ /* TODO: Initialize these through some normal kernel mechanism.
+ */
+ instance_data->flip_X = false;
+ instance_data->flip_Y = false;
+ instance_data->swap_axes = false;
+ instance_data->rel_report_enabled = true;
+ instance_data->offset_X = instance_data->offset_Y = 0;
+ instance_data->clip_X_low = instance_data->clip_Y_low = 0;
+ /* TODO: 65536 should actually be the largest valid RMI4
+ * position coordinate */
+ instance_data->clip_X_high = instance_data->clip_Y_high = 65536;
+
+ /* Load any overrides that were specified via platform data.
+ */
+ if (functiondata) {
+ pr_debug("%s: found F11 per function platformdata.", __func__);
+ instance_data->flip_X = functiondata->flip_X;
+ instance_data->flip_Y = functiondata->flip_Y;
+ instance_data->swap_axes = functiondata->swap_axes;
+ if (functiondata->offset) {
+ instance_data->offset_X = functiondata->offset->x;
+ instance_data->offset_Y = functiondata->offset->y;
+ }
+ if (functiondata->clip_X) {
+ if (functiondata->clip_X->min >=
+ functiondata->clip_X->max) {
+ pr_warning
+ ("%s: Clip X min (%d) >= X clip max (%d) "
+ "- ignored.",
+ __func__, functiondata->clip_X->min,
+ functiondata->clip_X->max);
+ } else {
+ instance_data->clip_X_low =
+ functiondata->clip_X->min;
+ instance_data->clip_X_high =
+ functiondata->clip_X->max;
+ }
+ }
+ if (functiondata->clip_Y) {
+ if (functiondata->clip_Y->min >=
+ functiondata->clip_Y->max) {
+ pr_warning
+ ("%s: Clip Y min (%d) >= Y clip max (%d) "
+ "- ignored.",
+ __func__, functiondata->clip_Y->min,
+ functiondata->clip_Y->max);
+ } else {
+ instance_data->clip_Y_low =
+ functiondata->clip_Y->min;
+ instance_data->clip_Y_high =
+ functiondata->clip_Y->max;
+ }
+ }
+ }
+
+ /* need to init the input abs params for the 2D */
+ set_bit(EV_ABS, function_device->input->evbit);
+ set_bit(EV_SYN, function_device->input->evbit);
+ set_bit(EV_KEY, function_device->input->evbit);
+
+ f11_set_abs_params(function_device);
+
+ pr_debug("%s: Creating sysfs files.", __func__);
+ /* Set up sysfs device attributes. */
+ for (attr_count = 0; attr_count < ARRAY_SIZE(attrs); attr_count++) {
+ if (sysfs_create_file
+ (&function_device->dev.kobj, &attrs[attr_count].attr) < 0) {
+ pr_err
+ ("%s: Failed to create sysfs file for %s.",
+ __func__, attrs[attr_count].attr.name);
+ retval = -ENODEV;
+ goto error_exit;
+ }
+ }
+
+ return 0;
+
+error_exit:
+ for (attr_count--; attr_count >= 0; attr_count--)
+ sysfs_remove_file(&function_device->dev.kobj,
+ &attrs[attr_count].attr);
+ /* If you alloc anything, free it here. */
+ return retval;
+}
+EXPORT_SYMBOL(FN_11_init);
+
+int FN_11_detect(struct rmi_function_info *rmifninfo)
+{
+ unsigned char control_buffer[12]; /* TODO: Compute size correctly. */
+ int retval = 0;
+ struct f11_instance_data *instance_data;
+
+ pr_debug("%s: RMI4 F11 detect\n", __func__);
+
+ if (rmifninfo->fndata) {
+ /* detect routine should only ever be called once
+ * per rmifninfo. */
+ pr_err("%s: WTF?!? F11 instance data is already present!",
+ __func__);
+ return -EINVAL;
+ }
+ instance_data = kzalloc(sizeof(struct f11_instance_data), GFP_KERNEL);
+ if (!instance_data) {
+ pr_err("%s: Error allocating F11 instance data.\n", __func__);
+ retval = -ENOMEM;
+ goto error_exit;
+ }
+ rmifninfo->fndata = instance_data;
+
+ instance_data->device_info =
+ kzalloc(sizeof(struct rmi_F11_device_query), GFP_KERNEL);
+ if (!instance_data->device_info) {
+ pr_err("%s: Error allocating F11 device query.\n", __func__);
+ retval = -ENOMEM;
+ goto error_exit;
+ }
+ instance_data->sensor_info =
+ kzalloc(sizeof(struct rmi_F11_sensor_query), GFP_KERNEL);
+ if (!instance_data->sensor_info) {
+ pr_err("%s: Error allocating F11 sensor query.\n", __func__);
+ retval = -ENOMEM;
+ goto error_exit;
+ }
+ retval = read_query_registers(rmifninfo);
+ if (retval) {
+ pr_err("%s: Failed to read sensor query registers.", __func__);
+ goto error_exit;
+ }
+
+ instance_data->finger_data_buffer =
+ kcalloc(instance_data->finger_data_buffer_size,
+ sizeof(unsigned char), GFP_KERNEL);
+ if (!instance_data->finger_data_buffer) {
+ pr_err("%s: Failed to allocate finger data buffer.", __func__);
+ retval = -ENOMEM;
+ goto error_exit;
+ }
+
+ /* Grab a copy of the control registers. */
+ instance_data->control_registers =
+ kzalloc(sizeof(struct rmi_F11_control), GFP_KERNEL);
+ if (!instance_data->control_registers) {
+ pr_err("%s: Error allocating F11 control registers.\n",
+ __func__);
+ retval = -ENOMEM;
+ goto error_exit;
+ }
+ retval = rmi_read_multiple(rmifninfo->sensor,
+ rmifninfo->function_descriptor.control_base_addr,
+ control_buffer, sizeof(control_buffer));
+ if (retval) {
+ pr_err("%s: Failed to read F11 control registers.", __func__);
+ goto error_exit;
+ }
+ instance_data->control_registers->sensor_max_X_pos =
+ (((int)control_buffer[7] & 0x0F) << 8) + control_buffer[6];
+ instance_data->control_registers->sensor_max_Y_pos =
+ (((int)control_buffer[9] & 0x0F) << 8) + control_buffer[8];
+ pr_debug("%s: Max X %d Max Y %d", __func__,
+ instance_data->control_registers->sensor_max_X_pos,
+ instance_data->control_registers->sensor_max_Y_pos);
+ return 0;
+
+error_exit:
+ if (instance_data) {
+ kfree(instance_data->sensor_info);
+ kfree(instance_data->device_info);
+ kfree(instance_data->control_registers);
+ kfree(instance_data->finger_data_buffer);
+ }
+ kfree(instance_data);
+ rmifninfo->fndata = NULL;
+ return retval;
+}
+EXPORT_SYMBOL(FN_11_detect);
+
+static ssize_t rmi_fn_11_maxPos_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+
+ return snprintf(buf, PAGE_SIZE, "%u %u\n",
+ instance_data->control_registers->sensor_max_X_pos,
+ instance_data->control_registers->sensor_max_Y_pos);
+}
+
+static ssize_t rmi_fn_11_flip_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+
+ return snprintf(buf, PAGE_SIZE, "%u %u\n", instance_data->flip_X,
+ instance_data->flip_Y);
+}
+
+static ssize_t rmi_fn_11_flip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+ unsigned int new_X, new_Y;
+
+ if (sscanf(buf, "%u %u", &new_X, &new_Y) != 2)
+ return -EINVAL;
+ if (new_X < 0 || new_X > 1 || new_Y < 0 || new_Y > 1)
+ return -EINVAL;
+ instance_data->flip_X = new_X;
+ instance_data->flip_Y = new_Y;
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_swap_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", instance_data->swap_axes);
+}
+
+static ssize_t rmi_fn_11_swap_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+ unsigned int newSwap;
+
+ if (sscanf(buf, "%u", &newSwap) != 1)
+ return -EINVAL;
+ if (newSwap < 0 || newSwap > 1)
+ return -EINVAL;
+ instance_data->swap_axes = newSwap;
+
+ f11_set_abs_params(fn);
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_relreport_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+
+ return snprintf(buf, PAGE_SIZE,
+ "%u\n", instance_data->rel_report_enabled);
+}
+
+static ssize_t rmi_fn_11_relreport_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+ unsigned int new_value;
+
+ if (sscanf(buf, "%u", &new_value) != 1)
+ return -EINVAL;
+ if (new_value < 0 || new_value > 1)
+ return -EINVAL;
+ instance_data->rel_report_enabled = new_value;
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_offset_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+
+ return snprintf(buf, PAGE_SIZE, "%d %d\n", instance_data->offset_X,
+ instance_data->offset_Y);
+}
+
+static ssize_t rmi_fn_11_offset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+ int new_X, new_Y;
+
+ if (sscanf(buf, "%d %d", &new_X, &new_Y) != 2)
+ return -EINVAL;
+ instance_data->offset_X = new_X;
+ instance_data->offset_Y = new_Y;
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_clip_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+
+ return snprintf(buf, PAGE_SIZE, "%u %u %u %u\n",
+ instance_data->clip_X_low, instance_data->clip_X_high,
+ instance_data->clip_Y_low, instance_data->clip_Y_high);
+}
+
+static ssize_t rmi_fn_11_clip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = fn->rfi->fndata;
+ unsigned int new_X_low, new_X_high, new_Y_low, new_Y_high;
+
+ if (sscanf(buf, "%u %u %u %u",
+ &new_X_low, &new_X_high, &new_Y_low, &new_Y_high) != 4)
+ return -EINVAL;
+ if (new_X_low < 0 || new_X_low >= new_X_high || new_Y_low < 0
+ || new_Y_low >= new_Y_high)
+ return -EINVAL;
+ instance_data->clip_X_low = new_X_low;
+ instance_data->clip_X_high = new_X_high;
+ instance_data->clip_Y_low = new_Y_low;
+ instance_data->clip_Y_high = new_Y_high;
+
+ f11_set_abs_params(fn);
+
+ return count;
+}