@@ -164,7 +164,7 @@ static irqreturn_t atmel_wm97xx_channel_b_interrupt(int irq, void *dev_id)
data = ac97c_readl(atmel_wm97xx, CBRHR);
value = data & 0x0fff;
- source = data & WM97XX_ADCSRC_MASK;
+ source = data & WM97XX_ADCSEL_MASK;
pen_down = (data & WM97XX_PEN_DOWN) >> 8;
if (source == WM97XX_ADCSEL_X)
@@ -157,9 +157,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
x, y, p);
/* are samples valid */
- if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
- (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
- (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+ if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
+ (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
+ (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
goto up;
/* coordinate is good */
@@ -304,9 +304,9 @@ static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
wm->mach_ops->post_sample(adcsel);
/* check we have correct sample */
- if ((*sample & WM97XX_ADCSRC_MASK) != ffs(adcsel >> 1) << 12) {
+ if ((*sample & WM97XX_ADCSEL_MASK) != ffs(adcsel >> 1) << 12) {
dev_dbg(wm->dev, "adc wrong sample, read %x got %x", adcsel,
- *sample & WM97XX_ADCSRC_MASK);
+ *sample & WM97XX_ADCSEL_MASK);
return RC_PENUP;
}
@@ -122,9 +122,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm)
x, y, p);
/* are samples valid */
- if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
- (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
- (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+ if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
+ (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
+ (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
goto up;
/* coordinate is good */
@@ -38,7 +38,7 @@
#define WM97XX_ADCSEL_X 0x1000 /* x coord measurement */
#define WM97XX_ADCSEL_Y 0x2000 /* y coord measurement */
#define WM97XX_ADCSEL_PRES 0x3000 /* pressure measurement */
-#define WM97XX_ADCSEL_MASK 0x7000
+#define WM97XX_ADCSEL_MASK 0x7000 /* ADC selection mask */
#define WM97XX_COO 0x0800 /* enable coordinate mode */
#define WM97XX_CTC 0x0400 /* enable continuous mode */
#define WM97XX_CM_RATE_93 0x0000 /* 93.75Hz continuous rate */
@@ -61,7 +61,6 @@
#define WM97XX_PRP_DET_DIG 0xc000 /* setect on, digitise on */
#define WM97XX_RPR 0x2000 /* wake up on pen down */
#define WM97XX_PEN_DOWN 0x8000 /* pen is down */
-#define WM97XX_ADCSRC_MASK 0x7000 /* ADC source mask */
#define WM97XX_AUX_ID1 0x8001
#define WM97XX_AUX_ID2 0x8002
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> --- drivers/input/touchscreen/atmel-wm97xx.c | 2 +- drivers/input/touchscreen/mainstone-wm97xx.c | 6 +++--- drivers/input/touchscreen/wm9713.c | 4 ++-- drivers/input/touchscreen/zylonite-wm97xx.c | 6 +++--- include/linux/wm97xx.h | 3 +-- 5 files changed, 10 insertions(+), 11 deletions(-)