@@ -19,3 +19,15 @@ config TOUCHSCREEN_CYTTSP_CORE
To compile this driver as a module, choose M here: the
module will be called cyttsp_core.
+
+config TOUCHSCREEN_CYTTSP_I2C
+ tristate "Cypress TTSP i2c touchscreen"
+ depends on I2C && TOUCHSCREEN_CYTTSP_CORE
+ help
+ Say Y here if you have a Cypress TTSP touchscreen
+ connected to your system with an I2C interface.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp-i2c.
@@ -1 +1,2 @@
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o
new file mode 100644
@@ -0,0 +1,188 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/i2c.h>
+#include <linux/slab.h>
+
+#define CY_I2C_DATA_SIZE 128
+
+struct cyttsp_i2c {
+ struct cyttsp_bus_ops ops;
+ struct i2c_client *client;
+ void *ttsp_client;
+ u8 wr_buf[CY_I2C_DATA_SIZE];
+};
+
+static s32 ttsp_i2c_read_block_data(void *handle, u8 addr,
+ u8 length, void *values)
+{
+ struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c, ops);
+ int retval = 0;
+
+ retval = i2c_master_send(ts->client, &addr, 1);
+ if (retval < 0)
+ return retval;
+
+ retval = i2c_master_recv(ts->client, values, length);
+
+ return (retval < 0) ? retval : 0;
+}
+
+static s32 ttsp_i2c_write_block_data(void *handle, u8 addr,
+ u8 length, const void *values)
+{
+ struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c, ops);
+ int retval;
+
+ ts->wr_buf[0] = addr;
+ memcpy(&ts->wr_buf[1], values, length);
+
+ retval = i2c_master_send(ts->client, ts->wr_buf, length+1);
+
+ return (retval < 0) ? retval : 0;
+}
+
+static s32 ttsp_i2c_tch_ext(void *handle, void *values)
+{
+ struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c, ops);
+ int retval = 0;
+
+ /*
+ * TODO: Add custom touch extension handling code here
+ * set: retval < 0 for any returned system errors,
+ * retval = 0 if normal touch handling is required,
+ * retval > 0 if normal touch handling is *not* required
+ */
+ if (!ts || !values)
+ retval = -EINVAL;
+
+ return retval;
+}
+
+static int __devinit cyttsp_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct cyttsp_i2c *ts;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -EIO;
+
+ /* allocate and clear memory */
+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+ if (!ts) {
+ dev_dbg(&client->dev, "%s: Error, kzalloc.\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* register driver_data */
+ ts->client = client;
+ i2c_set_clientdata(client, ts);
+ ts->ops.write = ttsp_i2c_write_block_data;
+ ts->ops.read = ttsp_i2c_read_block_data;
+ ts->ops.ext = ttsp_i2c_tch_ext;
+ ts->ops.dev = &client->dev;
+ ts->ops.dev->bus = &i2c_bus_type;
+
+ ts->ttsp_client = cyttsp_core_init(&ts->ops, &client->dev);
+ if (IS_ERR(ts->ttsp_client)) {
+ int retval = PTR_ERR(ts->ttsp_client);
+ kfree(ts);
+ return retval;
+ }
+
+ dev_dbg(ts->ops.dev, "%s: Registration complete\n", __func__);
+
+ return 0;
+}
+
+
+/* registered in driver struct */
+static int __devexit cyttsp_i2c_remove(struct i2c_client *client)
+{
+ struct cyttsp_i2c *ts;
+
+ ts = i2c_get_clientdata(client);
+ cyttsp_core_release(ts->ttsp_client);
+ kfree(ts);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int cyttsp_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+ struct cyttsp_i2c *ts = i2c_get_clientdata(client);
+
+ return cyttsp_suspend(ts->ttsp_client);
+}
+
+static int cyttsp_i2c_resume(struct i2c_client *client)
+{
+ struct cyttsp_i2c *ts = i2c_get_clientdata(client);
+
+ return cyttsp_resume(ts->ttsp_client);
+}
+#endif
+
+static const struct i2c_device_id cyttsp_i2c_id[] = {
+ { CY_I2C_NAME, 0 }, { }
+};
+
+static struct i2c_driver cyttsp_i2c_driver = {
+ .driver = {
+ .name = CY_I2C_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = cyttsp_i2c_probe,
+ .remove = __devexit_p(cyttsp_i2c_remove),
+ .id_table = cyttsp_i2c_id,
+#ifdef CONFIG_PM
+ .suspend = cyttsp_i2c_suspend,
+ .resume = cyttsp_i2c_resume,
+#endif
+};
+
+static int __init cyttsp_i2c_init(void)
+{
+ return i2c_add_driver(&cyttsp_i2c_driver);
+}
+
+static void __exit cyttsp_i2c_exit(void)
+{
+ return i2c_del_driver(&cyttsp_i2c_driver);
+}
+
+module_init(cyttsp_i2c_init);
+module_exit(cyttsp_i2c_exit);
+
+MODULE_ALIAS("i2c:cyttsp");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver");
+MODULE_AUTHOR("Cypress");
+MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id);
Cypress TTSP Gen3 I2C Device Driver. Provides i2c communications modules for the Cypress TTSP Gen3 MTDEV Core Driver. The original author of this driver is: Kevin McNeely <kev@cypress.com> Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> --- drivers/staging/cyttsp/Kconfig | 12 +++ drivers/staging/cyttsp/Makefile | 1 + drivers/staging/cyttsp/cyttsp_i2c.c | 188 +++++++++++++++++++++++++++++++++++ 3 files changed, 201 insertions(+), 0 deletions(-) create mode 100644 drivers/staging/cyttsp/cyttsp_i2c.c