new file mode 100644
@@ -0,0 +1,594 @@
+/*
+ * Base driver for Marvell 88PM800
+ *
+ * Copyright (C) 2012 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ * Joseph(Yossi) Hanin <yhanin@marvell.com>
+ * Qiao Zhou <zhouqiao@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/88pm80x.h>
+#include <linux/slab.h>
+
+#define PM800_CHIP_ID (0x00)
+
+/* Interrupt Registers */
+#define PM800_INT_STATUS1 (0x05)
+#define PM800_ONKEY_INT_STS1 (1 << 0)
+#define PM800_EXTON_INT_STS1 (1 << 1)
+#define PM800_CHG_INT_STS1 (1 << 2)
+#define PM800_BAT_INT_STS1 (1 << 3)
+#define PM800_RTC_INT_STS1 (1 << 4)
+#define PM800_CLASSD_OC_INT_STS1 (1 << 5)
+
+#define PM800_INT_STATUS2 (0x06)
+#define PM800_VBAT_INT_STS2 (1 << 0)
+#define PM800_VSYS_INT_STS2 (1 << 1)
+#define PM800_VCHG_INT_STS2 (1 << 2)
+#define PM800_TINT_INT_STS2 (1 << 3)
+#define PM800_GPADC0_INT_STS2 (1 << 4)
+#define PM800_TBAT_INT_STS2 (1 << 5)
+#define PM800_GPADC2_INT_STS2 (1 << 6)
+#define PM800_GPADC3_INT_STS2 (1 << 7)
+
+#define PM800_INT_STATUS3 (0x07)
+
+#define PM800_INT_STATUS4 (0x08)
+#define PM800_GPIO0_INT_STS4 (1 << 0)
+#define PM800_GPIO1_INT_STS4 (1 << 1)
+#define PM800_GPIO2_INT_STS4 (1 << 2)
+#define PM800_GPIO3_INT_STS4 (1 << 3)
+#define PM800_GPIO4_INT_STS4 (1 << 4)
+
+#define PM800_INT_ENA_1 (0x09)
+#define PM800_ONKEY_INT_ENA1 (1 << 0)
+#define PM800_EXTON_INT_ENA1 (1 << 1)
+#define PM800_CHG_INT_ENA1 (1 << 2)
+#define PM800_BAT_INT_ENA1 (1 << 3)
+#define PM800_RTC_INT_ENA1 (1 << 4)
+#define PM800_CLASSD_OC_INT_ENA1 (1 << 5)
+
+#define PM800_INT_ENA_2 (0x0A)
+#define PM800_VBAT_INT_ENA2 (1 << 0)
+#define PM800_VSYS_INT_ENA2 (1 << 1)
+#define PM800_VCHG_INT_ENA2 (1 << 2)
+#define PM800_TINT_INT_ENA2 (1 << 3)
+
+#define PM800_INT_ENA_3 (0x0B)
+#define PM800_GPADC0_INT_ENA3 (1 << 0)
+#define PM800_GPADC1_INT_ENA3 (1 << 1)
+#define PM800_GPADC2_INT_ENA3 (1 << 2)
+#define PM800_GPADC3_INT_ENA3 (1 << 3)
+#define PM800_GPADC4_INT_ENA3 (1 << 4)
+
+#define PM800_INT_ENA_4 (0x0C)
+#define PM800_GPIO0_INT_ENA4 (1 << 0)
+#define PM800_GPIO1_INT_ENA4 (1 << 1)
+#define PM800_GPIO2_INT_ENA4 (1 << 2)
+#define PM800_GPIO3_INT_ENA4 (1 << 3)
+#define PM800_GPIO4_INT_ENA4 (1 << 4)
+
+/* number of INT_ENA & INT_STATUS regs */
+#define PM800_INT_REG_NUM (4)
+
+/* Interrupt Number in 88PM800 */
+enum {
+ PM800_IRQ_ONKEY, /*EN1b0 *//*0 */
+ PM800_IRQ_EXTON, /*EN1b1 */
+ PM800_IRQ_CHG, /*EN1b2 */
+ PM800_IRQ_BAT, /*EN1b3 */
+ PM800_IRQ_RTC, /*EN1b4 */
+ PM800_IRQ_CLASSD, /*EN1b5 *//*5 */
+ PM800_IRQ_VBAT, /*EN2b0 */
+ PM800_IRQ_VSYS, /*EN2b1 */
+ PM800_IRQ_VCHG, /*EN2b2 */
+ PM800_IRQ_TINT, /*EN2b3 */
+ PM800_IRQ_GPADC0, /*EN3b0 *//*10 */
+ PM800_IRQ_GPADC1, /*EN3b1 */
+ PM800_IRQ_GPADC2, /*EN3b2 */
+ PM800_IRQ_GPADC3, /*EN3b3 */
+ PM800_IRQ_GPADC4, /*EN3b4 */
+ PM800_IRQ_GPIO0, /*EN4b0 *//*15 */
+ PM800_IRQ_GPIO1, /*EN4b1 */
+ PM800_IRQ_GPIO2, /*EN4b2 */
+ PM800_IRQ_GPIO3, /*EN4b3 */
+ PM800_IRQ_GPIO4, /*EN4b4 *//*19 */
+ PM800_MAX_IRQ,
+};
+
+enum {
+ /* Procida */
+ PM800_CHIP_A0 = 0x60,
+ PM800_CHIP_A1 = 0x61,
+ PM800_CHIP_B0 = 0x62,
+ PM800_CHIP_C0 = 0x63,
+ PM800_CHIP_END = PM800_CHIP_C0,
+
+ /* Make sure to update this to the last stepping */
+ PM8XXX_CHIP_END = PM800_CHIP_END
+};
+
+static const struct i2c_device_id pm80x_id_table[] = {
+ {"88PM800", CHIP_PM800},
+ {} /* NULL terminated */
+};
+MODULE_DEVICE_TABLE(i2c, pm80x_id_table);
+
+static struct resource rtc_resources[] = {
+ {
+ .name = "88pm80x-rtc",
+ .start = PM800_IRQ_RTC,
+ .end = PM800_IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell rtc_devs[] = {
+ {
+ .name = "88pm80x-rtc",
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resources = &rtc_resources[0],
+ .id = -1,
+ },
+};
+
+static struct resource onkey_resources[] = {
+ {
+ .name = "88pm80x-onkey",
+ .start = PM800_IRQ_ONKEY,
+ .end = PM800_IRQ_ONKEY,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell onkey_devs[] = {
+ {
+ .name = "88pm80x-onkey",
+ .num_resources = 1,
+ .resources = &onkey_resources[0],
+ .id = -1,
+ },
+};
+
+static const struct regmap_irq pm800_irqs[] = {
+ /* INT0 */
+ [PM800_IRQ_ONKEY] = {
+ .mask = PM800_ONKEY_INT_ENA1,
+ },
+ [PM800_IRQ_EXTON] = {
+ .mask = PM800_EXTON_INT_ENA1,
+ },
+ [PM800_IRQ_CHG] = {
+ .mask = PM800_CHG_INT_ENA1,
+ },
+ [PM800_IRQ_BAT] = {
+ .mask = PM800_BAT_INT_ENA1,
+ },
+ [PM800_IRQ_RTC] = {
+ .mask = PM800_RTC_INT_ENA1,
+ },
+ [PM800_IRQ_CLASSD] = {
+ .mask = PM800_CLASSD_OC_INT_ENA1,
+ },
+ /* INT1 */
+ [PM800_IRQ_VBAT] = {
+ .reg_offset = 1,
+ .mask = PM800_VBAT_INT_ENA2,
+ },
+ [PM800_IRQ_VSYS] = {
+ .reg_offset = 1,
+ .mask = PM800_VSYS_INT_ENA2,
+ },
+ [PM800_IRQ_VCHG] = {
+ .reg_offset = 1,
+ .mask = PM800_VCHG_INT_ENA2,
+ },
+ [PM800_IRQ_TINT] = {
+ .reg_offset = 1,
+ .mask = PM800_TINT_INT_ENA2,
+ },
+ /* INT2 */
+ [PM800_IRQ_GPADC0] = {
+ .reg_offset = 2,
+ .mask = PM800_GPADC0_INT_ENA3,
+ },
+ [PM800_IRQ_GPADC1] = {
+ .reg_offset = 2,
+ .mask = PM800_GPADC1_INT_ENA3,
+ },
+ [PM800_IRQ_GPADC2] = {
+ .reg_offset = 2,
+ .mask = PM800_GPADC2_INT_ENA3,
+ },
+ [PM800_IRQ_GPADC3] = {
+ .reg_offset = 2,
+ .mask = PM800_GPADC3_INT_ENA3,
+ },
+ [PM800_IRQ_GPADC4] = {
+ .reg_offset = 2,
+ .mask = PM800_GPADC4_INT_ENA3,
+ },
+ /* INT3 */
+ [PM800_IRQ_GPIO0] = {
+ .reg_offset = 3,
+ .mask = PM800_GPIO0_INT_ENA4,
+ },
+ [PM800_IRQ_GPIO1] = {
+ .reg_offset = 3,
+ .mask = PM800_GPIO1_INT_ENA4,
+ },
+ [PM800_IRQ_GPIO2] = {
+ .reg_offset = 3,
+ .mask = PM800_GPIO2_INT_ENA4,
+ },
+ [PM800_IRQ_GPIO3] = {
+ .reg_offset = 3,
+ .mask = PM800_GPIO3_INT_ENA4,
+ },
+ [PM800_IRQ_GPIO4] = {
+ .reg_offset = 3,
+ .mask = PM800_GPIO4_INT_ENA4,
+ },
+};
+
+static int __devinit device_gpadc_init(struct pm80x_chip *chip,
+ struct pm80x_platform_data *pdata)
+{
+ struct pm80x_subchip *subchip = chip->subchip;
+ struct regmap *map = subchip->regmap_gpadc;
+ int data = 0, mask = 0, ret = 0;
+
+ if (!map) {
+ dev_warn(chip->dev,
+ "Warning: gpadc regmap is not available!\n");
+ return -EINVAL;
+ }
+ /*
+ * initialize GPADC without activating it turn on GPADC
+ * measurments
+ */
+ ret = regmap_update_bits(map,
+ PM800_GPADC_MISC_CONFIG2,
+ PM800_GPADC_MISC_GPFSM_EN,
+ PM800_GPADC_MISC_GPFSM_EN);
+ if (ret < 0)
+ goto out;
+ /*
+ * This function configures the ADC as requires for
+ * CP implementation.CP does not "own" the ADC configuration
+ * registers and relies on AP.
+ * Reason: enable automatic ADC measurements needed
+ * for CP to get VBAT and RF temperature readings.
+ */
+ ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN1,
+ PM800_MEAS_EN1_VBAT, PM800_MEAS_EN1_VBAT);
+ if (ret < 0)
+ goto out;
+ ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN2,
+ (PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN),
+ (PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN));
+ if (ret < 0)
+ goto out;
+
+ /*
+ * the defult of PM800 is GPADC operates at 100Ks/s rate
+ * and Number of GPADC slots with active current bias prior
+ * to GPADC sampling = 1 slot for all GPADCs set for
+ * Temprature mesurmants
+ */
+ mask = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 |
+ PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3);
+
+ if (pdata && (pdata->batt_det == 0))
+ data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 |
+ PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3);
+ else
+ data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN2 |
+ PM800_GPADC_GP_BIAS_EN3);
+
+ ret = regmap_update_bits(map, PM800_GP_BIAS_ENA1, mask, data);
+ if (ret < 0)
+ goto out;
+
+ dev_info(chip->dev, "pm800 device_gpadc_init: Done\n");
+ return 0;
+
+out:
+ dev_info(chip->dev, "pm800 device_gpadc_init: Failed!\n");
+ return ret;
+}
+
+static int __devinit device_irq_init_800(struct pm80x_chip *chip)
+{
+ struct regmap *map = chip->regmap;
+ unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+ int data, mask, ret = -EINVAL;
+
+ if (!map || !chip->irq) {
+ dev_err(chip->dev, "incorrect parameters\n");
+ return -EINVAL;
+ }
+
+ /*
+ * irq_mode defines the way of clearing interrupt. it's read-clear by
+ * default.
+ */
+ mask =
+ PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
+ PM800_WAKEUP2_INT_MASK;
+
+ data = PM800_WAKEUP2_INT_CLEAR;
+ ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
+
+ if (ret < 0)
+ goto out;
+
+ ret =
+ regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1,
+ chip->regmap_irq_chip, &chip->irq_data);
+
+out:
+ return ret;
+}
+
+static void device_irq_exit_800(struct pm80x_chip *chip)
+{
+ regmap_del_irq_chip(chip->irq, chip->irq_data);
+}
+
+static struct regmap_irq_chip pm800_irq_chip = {
+ .name = "88pm800",
+ .irqs = pm800_irqs,
+ .num_irqs = ARRAY_SIZE(pm800_irqs),
+
+ .num_regs = 4,
+ .status_base = PM800_INT_STATUS1,
+ .mask_base = PM800_INT_ENA_1,
+ .ack_base = PM800_INT_STATUS1,
+};
+
+static int pm800_pages_init(struct pm80x_chip *chip)
+{
+ struct pm80x_subchip *subchip;
+ struct i2c_client *client = chip->client;
+
+ subchip = chip->subchip;
+ /* PM800 block power: i2c addr 0x31 */
+ if (subchip->power_page_addr) {
+ subchip->power_page =
+ i2c_new_dummy(client->adapter, subchip->power_page_addr);
+ subchip->regmap_power =
+ devm_regmap_init_i2c(subchip->power_page,
+ &pm80x_regmap_config);
+ i2c_set_clientdata(subchip->power_page, chip);
+ } else
+ dev_info(chip->dev,
+ "PM800 block power 0x31: No power_page_addr\n");
+
+ /* PM800 block GPADC: i2c addr 0x32 */
+ if (subchip->gpadc_page_addr) {
+ subchip->gpadc_page = i2c_new_dummy(client->adapter,
+ subchip->gpadc_page_addr);
+ subchip->regmap_gpadc =
+ devm_regmap_init_i2c(subchip->gpadc_page,
+ &pm80x_regmap_config);
+ i2c_set_clientdata(subchip->gpadc_page, chip);
+ } else
+ dev_info(chip->dev,
+ "PM800 block GPADC 0x32: No gpadc_page_addr\n");
+
+ return 0;
+}
+
+static void pm800_pages_exit(struct pm80x_chip *chip)
+{
+ struct pm80x_subchip *subchip;
+
+ regmap_exit(chip->regmap);
+ i2c_unregister_device(chip->client);
+
+ subchip = chip->subchip;
+ if (subchip->power_page) {
+ regmap_exit(subchip->regmap_power);
+ i2c_unregister_device(subchip->power_page);
+ }
+ if (subchip->gpadc_page) {
+ regmap_exit(subchip->regmap_gpadc);
+ i2c_unregister_device(subchip->gpadc_page);
+ }
+}
+
+static int __devinit device_800_init(struct pm80x_chip *chip,
+ struct pm80x_platform_data *pdata)
+{
+ int ret, pmic_id;
+
+ regmap_read(chip->regmap, PM800_CHIP_ID, &ret);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
+ goto out;
+ }
+
+ pmic_id = ret & PM80X_VERSION_MASK;
+
+ if ((pmic_id >= PM800_CHIP_A0) && (pmic_id <= PM800_CHIP_END)) {
+ chip->version = ret;
+ dev_info(chip->dev,
+ "88PM80x:Marvell 88PM800 (ID:0x%x) detected\n", ret);
+ } else {
+ dev_err(chip->dev,
+ "Failed to detect Marvell 88PM800:ChipID[0x%x]\n", ret);
+ goto out;
+ }
+
+ /*
+ * alarm wake up bit will be clear in device_irq_init(),
+ * read before that
+ */
+ regmap_read(chip->regmap, PM800_RTC_CONTROL, &ret);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to read RTC register: %d\n", ret);
+ goto out;
+ }
+ if (ret & PM800_ALARM_WAKEUP) {
+ if (pdata && pdata->rtc)
+ pdata->rtc->rtc_wakeup = 1;
+ }
+
+ ret = device_gpadc_init(chip, pdata);
+ if (ret < 0) {
+ dev_err(chip->dev, "[%s]Failed to init gpadc\n", __func__);
+ goto out;
+ }
+
+ chip->regmap_irq_chip = &pm800_irq_chip;
+
+ ret = device_irq_init_800(chip);
+ if (ret < 0) {
+ dev_err(chip->dev, "[%s]Failed to init pm800 irq\n", __func__);
+ goto out;
+ }
+
+ ret =
+ mfd_add_devices(chip->dev, 0, &onkey_devs[0],
+ ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to add onkey subdev\n");
+ goto out_dev;
+ } else
+ dev_info(chip->dev, "[%s]:Added mfd onkey_devs\n", __func__);
+
+ if (pdata && pdata->rtc) {
+ rtc_devs[0].platform_data = pdata->rtc;
+ rtc_devs[0].pdata_size = sizeof(struct pm80x_rtc_pdata);
+ ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
+ ARRAY_SIZE(rtc_devs), NULL, 0);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to add rtc subdev\n");
+ goto out_dev;
+ } else
+ dev_info(chip->dev,
+ "[%s]:Added mfd rtc_devs\n", __func__);
+ }
+
+ return 0;
+out_dev:
+ mfd_remove_devices(chip->dev);
+ device_irq_exit_800(chip);
+out:
+ return ret;
+}
+
+static int __devinit pm800_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret = 0;
+ struct pm80x_chip *chip;
+ struct pm80x_platform_data *pdata = client->dev.platform_data;
+ struct pm80x_subchip *subchip;
+
+ ret = pm80x_init(client, id);
+ if (ret) {
+ dev_err(&client->dev, "pm800_init fail\n");
+ goto out_init;
+ }
+
+ chip = i2c_get_clientdata(client);
+
+ /* init subchip for PM800 */
+ subchip =
+ devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip),
+ GFP_KERNEL);
+ if (!subchip) {
+ ret = -ENOMEM;
+ goto err_subchip_alloc;
+ }
+
+ subchip->power_page_addr = pdata->power_page_addr;
+ subchip->gpadc_page_addr = pdata->gpadc_page_addr;
+ chip->subchip = subchip;
+
+ ret = device_800_init(chip, pdata);
+ if (ret) {
+ dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id);
+ goto err_800_init;
+ }
+
+ ret = pm800_pages_init(chip);
+ if (ret) {
+ dev_err(&client->dev, "pm800_pages_init failed!\n");
+ goto err_page_init;
+ }
+
+ if (pdata->plat_config)
+ pdata->plat_config(chip, pdata);
+
+err_page_init:
+ mfd_remove_devices(chip->dev);
+ device_irq_exit_800(chip);
+err_800_init:
+ devm_kfree(&client->dev, subchip);
+err_subchip_alloc:
+ pm80x_deinit(client);
+out_init:
+ return ret;
+}
+
+static int __devexit pm800_remove(struct i2c_client *client)
+{
+ struct pm80x_chip *chip = i2c_get_clientdata(client);
+
+ mfd_remove_devices(chip->dev);
+ device_irq_exit_800(chip);
+
+ pm800_pages_exit(chip);
+ devm_kfree(&client->dev, chip->subchip);
+
+ pm80x_deinit(client);
+
+ return 0;
+}
+
+static struct i2c_driver pm800_driver = {
+ .driver = {
+ .name = "88PM80X",
+ .owner = THIS_MODULE,
+ .pm = &pm80x_pm_ops,
+ },
+ .probe = pm800_probe,
+ .remove = __devexit_p(pm800_remove),
+ .id_table = pm80x_id_table,
+};
+
+static int __init pm800_i2c_init(void)
+{
+ return i2c_add_driver(&pm800_driver);
+}
+subsys_initcall(pm800_i2c_init);
+
+static void __exit pm800_i2c_exit(void)
+{
+ i2c_del_driver(&pm800_driver);
+}
+module_exit(pm800_i2c_exit);
+
+MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM800");
+MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,300 @@
+/*
+ * Base driver for Marvell 88PM805
+ *
+ * Copyright (C) 2012 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ * Joseph(Yossi) Hanin <yhanin@marvell.com>
+ * Qiao Zhou <zhouqiao@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/88pm80x.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#define PM805_CHIP_ID (0x00)
+
+static const struct i2c_device_id pm80x_id_table[] = {
+ {"88PM805", CHIP_PM805},
+ {} /* NULL terminated */
+};
+MODULE_DEVICE_TABLE(i2c, pm80x_id_table);
+
+/* Interrupt Number in 88PM805 */
+enum {
+ PM805_IRQ_LDO_OFF, /*0 */
+ PM805_IRQ_SRC_DPLL_LOCK, /*1 */
+ PM805_IRQ_CLIP_FAULT,
+ PM805_IRQ_MIC_CONFLICT,
+ PM805_IRQ_HP2_SHRT,
+ PM805_IRQ_HP1_SHRT, /*5 */
+ PM805_IRQ_FINE_PLL_FAULT,
+ PM805_IRQ_RAW_PLL_FAULT,
+ PM805_IRQ_VOLP_BTN_DET,
+ PM805_IRQ_VOLM_BTN_DET,
+ PM805_IRQ_SHRT_BTN_DET, /*10 */
+ PM805_IRQ_MIC_DET, /*11 */
+
+ PM805_MAX_IRQ,
+};
+
+static struct resource codec_resources[] = {
+ {
+ /* Headset microphone insertion or removal */
+ .name = "micin",
+ .start = PM805_IRQ_MIC_DET,
+ .end = PM805_IRQ_MIC_DET,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ /* Audio short HP1 */
+ .name = "audio-short1",
+ .start = PM805_IRQ_HP1_SHRT,
+ .end = PM805_IRQ_HP1_SHRT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ /* Audio short HP2 */
+ .name = "audio-short2",
+ .start = PM805_IRQ_HP2_SHRT,
+ .end = PM805_IRQ_HP2_SHRT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell codec_devs[] = {
+ {
+ .name = "88pm80x-codec",
+ .num_resources = ARRAY_SIZE(codec_resources),
+ .resources = &codec_resources[0],
+ .id = -1,
+ },
+};
+
+static struct regmap_irq pm805_irqs[] = {
+ /* INT0 */
+ [PM805_IRQ_LDO_OFF] = {
+ .mask = PM805_INT1_HP1_SHRT,
+ },
+ [PM805_IRQ_SRC_DPLL_LOCK] = {
+ .mask = PM805_INT1_HP2_SHRT,
+ },
+ [PM805_IRQ_CLIP_FAULT] = {
+ .mask = PM805_INT1_MIC_CONFLICT,
+ },
+ [PM805_IRQ_MIC_CONFLICT] = {
+ .mask = PM805_INT1_CLIP_FAULT,
+ },
+ [PM805_IRQ_HP2_SHRT] = {
+ .mask = PM805_INT1_LDO_OFF,
+ },
+ [PM805_IRQ_HP1_SHRT] = {
+ .mask = PM805_INT1_SRC_DPLL_LOCK,
+ },
+ /* INT1 */
+ [PM805_IRQ_FINE_PLL_FAULT] = {
+ .reg_offset = 1,
+ .mask = PM805_INT2_MIC_DET,
+ },
+ [PM805_IRQ_RAW_PLL_FAULT] = {
+ .reg_offset = 1,
+ .mask = PM805_INT2_SHRT_BTN_DET,
+ },
+ [PM805_IRQ_VOLP_BTN_DET] = {
+ .reg_offset = 1,
+ .mask = PM805_INT2_VOLM_BTN_DET,
+ },
+ [PM805_IRQ_VOLM_BTN_DET] = {
+ .reg_offset = 1,
+ .mask = PM805_INT2_VOLP_BTN_DET,
+ },
+ [PM805_IRQ_SHRT_BTN_DET] = {
+ .reg_offset = 1,
+ .mask = PM805_INT2_RAW_PLL_FAULT,
+ },
+ [PM805_IRQ_MIC_DET] = {
+ .reg_offset = 1,
+ .mask = PM805_INT2_FINE_PLL_FAULT,
+ },
+};
+
+static int __devinit device_irq_init_805(struct pm80x_chip *chip)
+{
+ struct regmap *map = chip->regmap;
+ unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+ int data, mask, ret = -EINVAL;
+
+ if (!map || !chip->irq) {
+ dev_err(chip->dev, "incorrect parameters\n");
+ return -EINVAL;
+ }
+
+ /*
+ * irq_mode defines the way of clearing interrupt. it's read-clear by
+ * default.
+ */
+ mask =
+ PM805_STATUS0_INT_CLEAR | PM805_STATUS0_INV_INT |
+ PM800_STATUS0_INT_MASK;
+
+ data = PM805_STATUS0_INT_CLEAR;
+ ret = regmap_update_bits(map, PM805_INT_STATUS0, mask, data);
+ /*
+ * PM805_INT_STATUS is under 32K clock domain, so need to
+ * add proper delay before the next I2C register access.
+ */
+ msleep(1);
+
+ if (ret < 0)
+ goto out;
+
+ ret =
+ regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1,
+ chip->regmap_irq_chip, &chip->irq_data);
+
+out:
+ return ret;
+}
+
+static void device_irq_exit_805(struct pm80x_chip *chip)
+{
+ regmap_del_irq_chip(chip->irq, chip->irq_data);
+}
+
+static struct regmap_irq_chip pm805_irq_chip = {
+ .name = "88pm805",
+ .irqs = pm805_irqs,
+ .num_irqs = ARRAY_SIZE(pm805_irqs),
+
+ .num_regs = 2,
+ .status_base = PM805_INT_STATUS1,
+ .mask_base = PM805_INT_MASK1,
+ .ack_base = PM805_INT_STATUS1,
+};
+
+static int __devinit device_805_init(struct pm80x_chip *chip)
+{
+ int ret = 0;
+ struct regmap *map = chip->regmap;
+
+ if (!map) {
+ dev_err(chip->dev, "regmap is invalid\n");
+ return -EINVAL;
+ }
+
+ regmap_read(map, PM805_CHIP_ID, &ret);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
+ goto out_irq_init;
+ }
+ chip->version = ret;
+
+ chip->regmap_irq_chip = &pm805_irq_chip;
+
+ ret = device_irq_init_805(chip);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to init pm805 irq!\n");
+ goto out_irq_init;
+ }
+
+ ret = mfd_add_devices(chip->dev, 0, &codec_devs[0],
+ ARRAY_SIZE(codec_devs), &codec_resources[0], 0);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to add codec subdev\n");
+ goto out_codec;
+ } else
+ dev_info(chip->dev, "[%s]:Added mfd codec_devs\n", __func__);
+
+ return 0;
+
+out_codec:
+ device_irq_exit_805(chip);
+out_irq_init:
+ return ret;
+}
+
+static int __devinit pm805_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret = 0;
+ struct pm80x_chip *chip;
+ struct pm80x_platform_data *pdata = client->dev.platform_data;
+
+ ret = pm80x_init(client, id);
+ if (ret) {
+ dev_err(&client->dev, "pm805_init fail!\n");
+ goto out_init;
+ }
+
+ chip = i2c_get_clientdata(client);
+
+ ret = device_805_init(chip);
+ if (ret) {
+ dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id);
+ goto err_805_init;
+ }
+
+ if (pdata->plat_config)
+ pdata->plat_config(chip, pdata);
+
+err_805_init:
+ pm80x_deinit(client);
+out_init:
+ return ret;
+}
+
+static int __devexit pm805_remove(struct i2c_client *client)
+{
+ struct pm80x_chip *chip = i2c_get_clientdata(client);
+
+ mfd_remove_devices(chip->dev);
+ device_irq_exit_805(chip);
+
+ pm80x_deinit(client);
+
+ return 0;
+}
+
+static struct i2c_driver pm805_driver = {
+ .driver = {
+ .name = "88PM80X",
+ .owner = THIS_MODULE,
+ .pm = &pm80x_pm_ops,
+ },
+ .probe = pm805_probe,
+ .remove = __devexit_p(pm805_remove),
+ .id_table = pm80x_id_table,
+};
+
+static int __init pm805_i2c_init(void)
+{
+ return i2c_add_driver(&pm805_driver);
+}
+subsys_initcall(pm805_i2c_init);
+
+static void __exit pm805_i2c_exit(void)
+{
+ i2c_del_driver(&pm805_driver);
+}
+module_exit(pm805_i2c_exit);
+
+MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM805");
+MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,117 @@
+/*
+ * I2C driver for Marvell 88PM80x
+ *
+ * Copyright (C) 2012 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ * Joseph(Yossi) Hanin <yhanin@marvell.com>
+ * Qiao Zhou <zhouqiao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/88pm80x.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/err.h>
+
+
+const struct regmap_config pm80x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+EXPORT_SYMBOL_GPL(pm80x_regmap_config);
+
+int __devinit pm80x_init(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pm80x_chip *chip;
+ struct regmap *map;
+ int ret = 0;
+
+ chip =
+ devm_kzalloc(&client->dev, sizeof(struct pm80x_chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ map = devm_regmap_init_i2c(client, &pm80x_regmap_config);
+ if (IS_ERR(map)) {
+ ret = PTR_ERR(map);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ goto err_regmap_init;
+ }
+
+ chip->id = id->driver_data;
+ if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805) {
+ ret = -EINVAL;
+ goto err_chip_id;
+ }
+
+ chip->client = client;
+ chip->regmap = map;
+
+ chip->irq = client->irq;
+
+ chip->dev = &client->dev;
+ dev_set_drvdata(chip->dev, chip);
+ i2c_set_clientdata(chip->client, chip);
+
+ device_init_wakeup(&client->dev, 1);
+
+ return 0;
+
+err_chip_id:
+ regmap_exit(map);
+err_regmap_init:
+ devm_kfree(&client->dev, chip);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pm80x_init);
+
+int __devexit pm80x_deinit(struct i2c_client *client)
+{
+ struct pm80x_chip *chip = i2c_get_clientdata(client);
+
+ regmap_exit(chip->regmap);
+ devm_kfree(&client->dev, chip);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pm80x_deinit);
+
+#ifdef CONFIG_PM_SLEEP
+static int pm80x_suspend(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct pm80x_chip *chip = i2c_get_clientdata(client);
+
+ if (chip && chip->wu_flag)
+ if (device_may_wakeup(chip->dev))
+ enable_irq_wake(chip->irq);
+
+ return 0;
+}
+
+static int pm80x_resume(struct device *dev)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct pm80x_chip *chip = i2c_get_clientdata(client);
+
+ if (chip && chip->wu_flag)
+ if (device_may_wakeup(chip->dev))
+ disable_irq_wake(chip->irq);
+
+ return 0;
+}
+#endif
+
+SIMPLE_DEV_PM_OPS(pm80x_pm_ops, pm80x_suspend, pm80x_resume);
+EXPORT_SYMBOL_GPL(pm80x_pm_ops);
+
+MODULE_DESCRIPTION("I2C Driver for Marvell 88PM80x");
+MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
+MODULE_LICENSE("GPL");
@@ -20,6 +20,30 @@ config MFD_88PM860X
select individual components like voltage regulators, RTC and
battery-charger under the corresponding menus.
+config MFD_88PM800
+ tristate "Support Marvell 88PM800"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select MFD_CORE
+ help
+ This supports for Marvell 88PM800 Power Management IC.
+ This includes the I2C driver and the core APIs _only_, you have to
+ select individual components like voltage regulators, RTC and
+ battery-charger under the corresponding menus.
+
+config MFD_88PM805
+ tristate "Support Marvell 88PM805"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select MFD_CORE
+ help
+ This supports for Marvell 88PM805 Power Management IC. This includes
+ the I2C driver and the core APIs _only_, you have to select individual
+ components like codec device, headset/Mic device under the
+ corresponding menus.
+
config MFD_SM501
tristate "Support for Silicon Motion SM501"
---help---
@@ -4,6 +4,8 @@
88pm860x-objs := 88pm860x-core.o 88pm860x-i2c.o
obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
+obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
+obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
new file mode 100644
@@ -0,0 +1,368 @@
+/*
+ * Marvell 88PM80x Interface
+ *
+ * Copyright (C) 2012 Marvell International Ltd.
+ * Qiao Zhou <zhouqiao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_88PM80X_H
+#define __LINUX_MFD_88PM80X_H
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/atomic.h>
+
+#define PM80X_VERSION_MASK (0xFF) /* 80X chip ID mask */
+enum {
+ CHIP_INVALID = 0,
+ CHIP_PM800,
+ CHIP_PM805,
+ CHIP_MAX,
+};
+
+enum {
+ PM800_ID_BUCK1 = 0,
+ PM800_ID_BUCK2,
+ PM800_ID_BUCK3,
+ PM800_ID_BUCK4,
+ PM800_ID_BUCK5,
+
+ PM800_ID_LDO1,
+ PM800_ID_LDO2,
+ PM800_ID_LDO3,
+ PM800_ID_LDO4,
+ PM800_ID_LDO5,
+ PM800_ID_LDO6,
+ PM800_ID_LDO7,
+ PM800_ID_LDO8,
+ PM800_ID_LDO9,
+ PM800_ID_LDO10,
+ PM800_ID_LDO11,
+ PM800_ID_LDO12,
+ PM800_ID_LDO13,
+ PM800_ID_LDO14,
+ PM800_ID_LDO15,
+ PM800_ID_LDO16,
+ PM800_ID_LDO17,
+ PM800_ID_LDO18,
+ PM800_ID_LDO19,
+
+ PM800_ID_RG_MAX,
+};
+#define PM800_MAX_REGULATOR PM800_ID_RG_MAX /* 5 Bucks, 19 LDOs */
+#define PM800_NUM_BUCK (5) /*5 Bucks */
+#define PM800_NUM_LDO (19) /*19 Bucks */
+
+/* page 0 basic: slave adder 0x60 */
+
+#define PM800_STATUS_1 (0x01)
+#define PM800_ONKEY_STS1 (1 << 0)
+#define PM800_EXTON_STS1 (1 << 1)
+#define PM800_CHG_STS1 (1 << 2)
+#define PM800_BAT_STS1 (1 << 3)
+#define PM800_VBUS_STS1 (1 << 4)
+#define PM800_LDO_PGOOD_STS1 (1 << 5)
+#define PM800_BUCK_PGOOD_STS1 (1 << 6)
+
+#define PM800_STATUS_2 (0x02)
+#define PM800_RTC_ALARM_STS2 (1 << 0)
+
+/* Wakeup Registers */
+#define PM800_WAKEUP1 (0x0D)
+
+#define PM800_WAKEUP2 (0x0E)
+#define PM800_WAKEUP2_INV_INT (1 << 0)
+#define PM800_WAKEUP2_INT_CLEAR (1 << 1)
+#define PM800_WAKEUP2_INT_MASK (1 << 2)
+
+#define PM800_POWER_UP_LOG (0x10)
+
+/* Referance and low power registers */
+#define PM800_LOW_POWER1 (0x20)
+#define PM800_LOW_POWER2 (0x21)
+#define PM800_LOW_POWER_CONFIG3 (0x22)
+#define PM800_LOW_POWER_CONFIG4 (0x23)
+
+/* GPIO register */
+#define PM800_GPIO_0_1_CNTRL (0x30)
+#define PM800_GPIO0_VAL (1 << 0)
+#define PM800_GPIO0_GPIO_MODE(x) (x << 1)
+#define PM800_GPIO1_VAL (1 << 4)
+#define PM800_GPIO1_GPIO_MODE(x) (x << 5)
+
+#define PM800_GPIO_2_3_CNTRL (0x31)
+#define PM800_GPIO2_VAL (1 << 0)
+#define PM800_GPIO2_GPIO_MODE(x) (x << 1)
+#define PM800_GPIO3_VAL (1 << 4)
+#define PM800_GPIO3_GPIO_MODE(x) (x << 5)
+#define PM800_GPIO3_MODE_MASK 0x1F
+#define PM800_GPIO3_HEADSET_MODE PM800_GPIO3_GPIO_MODE(6)
+
+#define PM800_GPIO_4_CNTRL (0x32)
+#define PM800_GPIO4_VAL (1 << 0)
+#define PM800_GPIO4_GPIO_MODE(x) (x << 1)
+
+#define PM800_HEADSET_CNTRL (0x38)
+#define PM800_HEADSET_DET_EN (1 << 7)
+#define PM800_HSDET_SLP (1 << 1)
+/* PWM register */
+#define PM800_PWM1 (0x40)
+#define PM800_PWM2 (0x41)
+#define PM800_PWM3 (0x42)
+#define PM800_PWM4 (0x43)
+
+/* RTC Registers */
+#define PM800_RTC_CONTROL (0xD0)
+#define PM800_RTC_MISC1 (0xE1)
+#define PM800_RTC_MISC2 (0xE2)
+#define PM800_RTC_MISC3 (0xE3)
+#define PM800_RTC_MISC4 (0xE4)
+#define PM800_RTC_MISC5 (0xE7)
+/* bit definitions of RTC Register 1 (0xD0) */
+#define PM800_ALARM1_EN (1 << 0)
+#define PM800_ALARM_WAKEUP (1 << 4)
+#define PM800_ALARM (1 << 5)
+#define PM800_RTC1_USE_XO (1 << 7)
+
+/* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */
+
+/* buck registers */
+#define PM800_SLEEP_BUCK1 (0x30)
+
+/* BUCK Sleep Mode Register 1: BUCK[1..4] */
+#define PM800_BUCK_SLP1 (0x5A)
+#define PM800_BUCK1_SLP1_SHIFT 0
+#define PM800_BUCK1_SLP1_MASK (0x3 << PM800_BUCK1_SLP1_SHIFT)
+
+/* page 2 GPADC: slave adder 0x02 */
+#define PM800_GPADC_MEAS_EN1 (0x01)
+#define PM800_MEAS_EN1_VBAT (1 << 2)
+#define PM800_GPADC_MEAS_EN2 (0x02)
+#define PM800_MEAS_EN2_RFTMP (1 << 0)
+#define PM800_MEAS_GP0_EN (1 << 2)
+#define PM800_MEAS_GP1_EN (1 << 3)
+#define PM800_MEAS_GP2_EN (1 << 4)
+#define PM800_MEAS_GP3_EN (1 << 5)
+#define PM800_MEAS_GP4_EN (1 << 6)
+
+#define PM800_GPADC_MISC_CONFIG1 (0x05)
+#define PM800_GPADC_MISC_CONFIG2 (0x06)
+#define PM800_GPADC_MISC_GPFSM_EN (1 << 0)
+#define PM800_GPADC_SLOW_MODE(x) (x << 3)
+
+#define PM800_GPADC_MISC_CONFIG3 (0x09)
+#define PM800_GPADC_MISC_CONFIG4 (0x0A)
+
+#define PM800_GPADC_PREBIAS1 (0x0F)
+#define PM800_GPADC0_GP_PREBIAS_TIME(x) (x << 0)
+#define PM800_GPADC_PREBIAS2 (0x10)
+
+#define PM800_GP_BIAS_ENA1 (0x14)
+#define PM800_GPADC_GP_BIAS_EN0 (1 << 0)
+#define PM800_GPADC_GP_BIAS_EN1 (1 << 1)
+#define PM800_GPADC_GP_BIAS_EN2 (1 << 2)
+#define PM800_GPADC_GP_BIAS_EN3 (1 << 3)
+
+#define PM800_GP_BIAS_OUT1 (0x15)
+#define PM800_BIAS_OUT_GP0 (1 << 0)
+#define PM800_BIAS_OUT_GP1 (1 << 1)
+#define PM800_BIAS_OUT_GP2 (1 << 2)
+#define PM800_BIAS_OUT_GP3 (1 << 3)
+
+#define PM800_GPADC0_LOW_TH 0x20
+#define PM800_GPADC1_LOW_TH 0x21
+#define PM800_GPADC2_LOW_TH 0x22
+#define PM800_GPADC3_LOW_TH 0x23
+#define PM800_GPADC4_LOW_TH 0x24
+
+#define PM800_GPADC0_UPP_TH 0x30
+#define PM800_GPADC1_UPP_TH 0x31
+#define PM800_GPADC2_UPP_TH 0x32
+#define PM800_GPADC3_UPP_TH 0x33
+#define PM800_GPADC4_UPP_TH 0x34
+
+#define PM800_VBBAT_MEAS1 0x40
+#define PM800_VBBAT_MEAS2 0x41
+#define PM800_VBAT_MEAS1 0x42
+#define PM800_VBAT_MEAS2 0x43
+#define PM800_VSYS_MEAS1 0x44
+#define PM800_VSYS_MEAS2 0x45
+#define PM800_VCHG_MEAS1 0x46
+#define PM800_VCHG_MEAS2 0x47
+#define PM800_TINT_MEAS1 0x50
+#define PM800_TINT_MEAS2 0x51
+#define PM800_PMOD_MEAS1 0x52
+#define PM800_PMOD_MEAS2 0x53
+
+#define PM800_GPADC0_MEAS1 0x54
+#define PM800_GPADC0_MEAS2 0x55
+#define PM800_GPADC1_MEAS1 0x56
+#define PM800_GPADC1_MEAS2 0x57
+#define PM800_GPADC2_MEAS1 0x58
+#define PM800_GPADC2_MEAS2 0x59
+#define PM800_GPADC3_MEAS1 0x5A
+#define PM800_GPADC3_MEAS2 0x5B
+#define PM800_GPADC4_MEAS1 0x5C
+#define PM800_GPADC4_MEAS2 0x5D
+
+#define PM800_GPADC4_AVG1 0xA8
+#define PM800_GPADC4_AVG2 0xA9
+
+/* 88PM805 Registers */
+#define PM805_MAIN_POWERUP (0x01)
+#define PM805_INT_STATUS0 (0x02) /* for ena/dis all interrupts */
+
+#define PM805_STATUS0_INT_CLEAR (1 << 0)
+#define PM805_STATUS0_INV_INT (1 << 1)
+#define PM800_STATUS0_INT_MASK (1 << 2)
+
+#define PM805_INT_STATUS1 (0x03)
+
+#define PM805_INT1_HP1_SHRT (1 << 0)
+#define PM805_INT1_HP2_SHRT (1 << 1)
+#define PM805_INT1_MIC_CONFLICT (1 << 2)
+#define PM805_INT1_CLIP_FAULT (1 << 3)
+#define PM805_INT1_LDO_OFF (1 << 4)
+#define PM805_INT1_SRC_DPLL_LOCK (1 << 5)
+
+#define PM805_INT_STATUS2 (0x04)
+
+#define PM805_INT2_MIC_DET (1 << 0)
+#define PM805_INT2_SHRT_BTN_DET (1 << 1)
+#define PM805_INT2_VOLM_BTN_DET (1 << 2)
+#define PM805_INT2_VOLP_BTN_DET (1 << 3)
+#define PM805_INT2_RAW_PLL_FAULT (1 << 4)
+#define PM805_INT2_FINE_PLL_FAULT (1 << 5)
+
+#define PM805_INT_MASK1 (0x05)
+#define PM805_INT_MASK2 (0x06)
+#define PM805_SHRT_BTN_DET (1 << 1)
+
+/* number of status and int reg in a row */
+#define PM805_INT_REG_NUM (2)
+
+#define PM805_MIC_DET1 (0x07)
+#define PM805_MIC_DET_EN_MIC_DET (1 << 0)
+#define PM805_MIC_DET2 (0x08)
+#define PM805_MIC_DET_STATUS1 (0x09)
+
+#define PM805_MIC_DET_STATUS3 (0x0A)
+#define PM805_AUTO_SEQ_STATUS1 (0x0B)
+#define PM805_AUTO_SEQ_STATUS2 (0x0C)
+
+#define PM805_ADC_SETTING1 (0x10)
+#define PM805_ADC_SETTING2 (0x11)
+#define PM805_ADC_SETTING3 (0x11)
+#define PM805_ADC_GAIN1 (0x12)
+#define PM805_ADC_GAIN2 (0x13)
+#define PM805_DMIC_SETTING (0x15)
+#define PM805_DWS_SETTING (0x16)
+#define PM805_MIC_CONFLICT_STS (0x17)
+
+#define PM805_PDM_SETTING1 (0x20)
+#define PM805_PDM_SETTING2 (0x21)
+#define PM805_PDM_SETTING3 (0x22)
+#define PM805_PDM_CONTROL1 (0x23)
+#define PM805_PDM_CONTROL2 (0x24)
+#define PM805_PDM_CONTROL3 (0x25)
+
+#define PM805_HEADPHONE_SETTING (0x26)
+#define PM805_HEADPHONE_GAIN_A2A (0x27)
+#define PM805_HEADPHONE_SHORT_STATE (0x28)
+#define PM805_EARPHONE_SETTING (0x29)
+#define PM805_AUTO_SEQ_SETTING (0x2A)
+
+struct pm80x_rtc_pdata {
+ int vrtc;
+ int rtc_wakeup;
+};
+
+struct pm80x_subchip {
+ struct i2c_client *power_page; /* chip client for power page */
+ struct i2c_client *gpadc_page; /* chip client for gpadc page */
+ struct regmap *regmap_power;
+ struct regmap *regmap_gpadc;
+ unsigned short power_page_addr; /* power page I2C address */
+ unsigned short gpadc_page_addr; /* gpadc page I2C address */
+};
+
+struct pm80x_chip {
+ struct pm80x_subchip *subchip;
+ struct device *dev;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct regmap_irq_chip *regmap_irq_chip;
+ struct regmap_irq_chip_data *irq_data;
+ unsigned char version;
+ int id;
+ int irq;
+ int irq_mode;
+ unsigned long wu_flag;
+ spinlock_t lock;
+};
+
+struct pm80x_platform_data {
+ struct pm80x_rtc_pdata *rtc;
+ unsigned short power_page_addr; /* power page I2C address */
+ unsigned short gpadc_page_addr; /* gpadc page I2C address */
+ int irq_mode; /* Clear interrupt by read/write(0/1) */
+ int batt_det; /* enable/disable */
+ int (*plat_config)(struct pm80x_chip *chip,
+ struct pm80x_platform_data *pdata);
+};
+
+extern const struct dev_pm_ops pm80x_pm_ops;
+extern const struct regmap_config pm80x_regmap_config;
+
+static inline int pm80x_request_irq(struct pm80x_chip *pm80x, int irq,
+ irq_handler_t handler, unsigned long flags,
+ const char *name, void *data)
+{
+ if (!pm80x->irq_data)
+ return -EINVAL;
+ return request_threaded_irq(regmap_irq_get_virq(pm80x->irq_data, irq),
+ NULL, handler, flags, name, data);
+}
+
+static inline void pm80x_free_irq(struct pm80x_chip *pm80x, int irq, void *data)
+{
+ if (!pm80x->irq_data)
+ return;
+ free_irq(regmap_irq_get_virq(pm80x->irq_data, irq), data);
+}
+
+#ifdef CONFIG_PM
+static inline int pm80x_dev_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ int irq = platform_get_irq(pdev, 0);
+
+ if (device_may_wakeup(dev))
+ set_bit((1 << irq), &chip->wu_flag);
+
+ return 0;
+}
+
+static inline int pm80x_dev_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ int irq = platform_get_irq(pdev, 0);
+
+ if (device_may_wakeup(dev))
+ clear_bit((1 << irq), &chip->wu_flag);
+
+ return 0;
+}
+#endif
+
+extern int pm80x_init(struct i2c_client *client,
+ const struct i2c_device_id *id) __devinit;
+extern int pm80x_deinit(struct i2c_client *client) __devexit;
+#endif /* __LINUX_MFD_88PM80X_H */