new file mode 100644
@@ -0,0 +1,37 @@
+Rotary encoder DT bindings
+
+Required properties:
+- gpios: a spec for two GPIOs to be used
+
+Optional properties:
+- linux,axis: the input subsystem axis to map to this rotary encoder.
+ Defaults to 0 (ABS_X / REL_X)
+- rotary-encoder,steps: Number of steps in a full turnaround of the
+ encoder. Only relevant for absolute axis. Defaults to 24 which is a
+ typical value for such devices.
+- rotary-encoder,relative-axis: register a relative axis rather than an
+ absolute one. Relative axis will only generate +1/-1 events on the input
+ device, hence no steps need to be passed.
+- rotary-encoder,rollover: Automatic rollove when the rotary value becomes
+ greater than the specified steps or smaller than 0. For absolute axis only.
+- rotary-encoder,half-period: Makes the driver work on half-period mode.
+
+See Documentation/input/rotary-encoder.txt for more information.
+
+Example:
+
+ rotary@0 {
+ compatible = "rotary-encoder";
+ gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */
+ linux,axis = <0>; /* REL_X */
+ rotary-encoder,relative-axis;
+ };
+
+ rotary@1 {
+ compatible = "rotary-encoder";
+ gpios = <&gpio 21 0>, <&gpio 22 0>;
+ linux,axis = <1>; /* ABS_Y */
+ rotary-encoder,steps = <24>;
+ rotary-encoder,rollover;
+ };
+
@@ -24,6 +24,8 @@
#include <linux/gpio.h>
#include <linux/rotary_encoder.h>
#include <linux/slab.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
#define DRV_NAME "rotary-encoder"
@@ -140,14 +142,72 @@ static irqreturn_t rotary_encoder_half_period_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+#ifdef CONFIG_OF
+static struct of_device_id rotary_encoder_of_match[] = {
+ { .compatible = "rotary-encoder", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rotary_encoder_of_match);
+
+static int rotary_encoder_probe_dt(struct platform_device *pdev)
+{
+ int tmp;
+ enum of_gpio_flags flags;
+ struct rotary_encoder_platform_data *pdata;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id =
+ of_match_device(rotary_encoder_of_match, &pdev->dev);
+
+ if (!of_id)
+ return 0;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (of_property_read_u32(np, "rotary-encoder,steps", &tmp) == 0)
+ pdata->steps = tmp;
+ if (of_property_read_u32(np, "linux,axis", &tmp) == 0)
+ pdata->axis = tmp;
+
+ pdata->gpio_a = of_get_gpio_flags(np, 0, &flags);
+ pdata->inverted_a = flags & OF_GPIO_ACTIVE_LOW;
+
+ pdata->gpio_b = of_get_gpio_flags(np, 1, &flags);
+ pdata->inverted_b = flags & OF_GPIO_ACTIVE_LOW;
+
+ if (of_get_property(np, "rotary-encoder,relative-axis", NULL))
+ pdata->relative_axis = 1;
+ if (of_get_property(np, "rotary-encoder,rollover", NULL))
+ pdata->rollover = 1;
+ if (of_get_property(np, "rotary-encoder,half-period", NULL))
+ pdata->half_period = 1;
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+#else
+static inline int rotary_encoder_probe_dt(struct platform_device *)
+{
+ return 0;
+}
+#endif
+
static int __devinit rotary_encoder_probe(struct platform_device *pdev)
{
- struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data;
+ struct rotary_encoder_platform_data *pdata;
struct rotary_encoder *encoder;
struct input_dev *input;
irq_handler_t handler;
int err;
+ err = rotary_encoder_probe_dt(pdev);
+ if (err)
+ return err;
+
+ pdata = pdev->dev.platform_data;
+
if (!pdata) {
dev_err(&pdev->dev, "missing platform data\n");
return -ENOENT;
@@ -282,6 +342,7 @@ static struct platform_driver rotary_encoder_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rotary_encoder_of_match),
}
};
module_platform_driver(rotary_encoder_driver);
This adds devicetree bindings to the rotary encoder driver and some documenation about how to use them. Tested on a PXA3xx platform. Signed-off-by: Daniel Mack <zonque@gmail.com> --- .../devicetree/bindings/input/rotary-encoder.txt | 37 ++++++++++++ drivers/input/misc/rotary_encoder.c | 63 +++++++++++++++++++- 2 files changed, 99 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/input/rotary-encoder.txt