@@ -25,14 +25,6 @@ Required Board Specific Properties:
- samsung,keypad-num-columns: Number of column lines connected to the
keypad controller.
-- row-gpios: List of gpios used as row lines. The gpio specifier for
- this property depends on the gpio controller to which these row lines
- are connected.
-
-- col-gpios: List of gpios used as column lines. The gpio specifier for
- this property depends on the gpio controller to which these column
- lines are connected.
-
- Keys represented as child nodes: Each key connected to the keypad
controller is represented as a child node to the keypad controller
device node and should include the following properties.
@@ -41,6 +33,9 @@ Required Board Specific Properties:
- linux,code: the key-code to be reported when the key is pressed
and released.
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
Optional Properties specific to linux:
- linux,keypad-no-autorepeat: do no enable autorepeat feature.
- linux,keypad-wakeup: use any event on keypad as wakeup event.
@@ -55,18 +50,8 @@ Example:
samsung,keypad-num-columns = <8>;
linux,input-no-autorepeat;
linux,input-wakeup;
-
- row-gpios = <&gpx2 0 3 3 0
- &gpx2 1 3 3 0>;
-
- col-gpios = <&gpx1 0 3 0 0
- &gpx1 1 3 0 0
- &gpx1 2 3 0 0
- &gpx1 3 3 0 0
- &gpx1 4 3 0 0
- &gpx1 5 3 0 0
- &gpx1 6 3 0 0
- &gpx1 7 3 0 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_rows &keypad_columns>;
key_1 {
keypad,row = <0>;
@@ -24,7 +24,6 @@
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/sched.h>
#include <linux/input/samsung-keypad.h>
@@ -79,10 +78,6 @@ struct samsung_keypad {
unsigned int rows;
unsigned int cols;
unsigned int row_state[SAMSUNG_MAX_COLS];
-#ifdef CONFIG_OF
- int row_gpios[SAMSUNG_MAX_ROWS];
- int col_gpios[SAMSUNG_MAX_COLS];
-#endif
unsigned short keycodes[];
};
@@ -304,45 +299,6 @@ static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
return pdata;
}
-
-static void samsung_keypad_parse_dt_gpio(struct device *dev,
- struct samsung_keypad *keypad)
-{
- struct device_node *np = dev->of_node;
- int gpio, error, row, col;
-
- for (row = 0; row < keypad->rows; row++) {
- gpio = of_get_named_gpio(np, "row-gpios", row);
- keypad->row_gpios[row] = gpio;
- if (!gpio_is_valid(gpio)) {
- dev_err(dev, "keypad row[%d]: invalid gpio %d\n",
- row, gpio);
- continue;
- }
-
- error = devm_gpio_request(dev, gpio, "keypad-row");
- if (error)
- dev_err(dev,
- "keypad row[%d] gpio request failed: %d\n",
- row, error);
- }
-
- for (col = 0; col < keypad->cols; col++) {
- gpio = of_get_named_gpio(np, "col-gpios", col);
- keypad->col_gpios[col] = gpio;
- if (!gpio_is_valid(gpio)) {
- dev_err(dev, "keypad column[%d]: invalid gpio %d\n",
- col, gpio);
- continue;
- }
-
- error = devm_gpio_request(dev, gpio, "keypad-col");
- if (error)
- dev_err(dev,
- "keypad column[%d] gpio request failed: %d\n",
- col, error);
- }
-}
#else
static
struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev)
@@ -424,15 +380,11 @@ static int samsung_keypad_probe(struct platform_device *pdev)
keypad->stopped = true;
init_waitqueue_head(&keypad->wait);
- if (pdev->dev.of_node) {
-#ifdef CONFIG_OF
- samsung_keypad_parse_dt_gpio(&pdev->dev, keypad);
+ if (pdev->dev.of_node)
keypad->type = of_device_is_compatible(pdev->dev.of_node,
"samsung,s5pv210-keypad");
-#endif
- } else {
+ else
keypad->type = platform_get_device_id(pdev)->driver_data;
- }
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
With device core now able to setup the default pin configuration, the pin configuration code based on the deprecated Samsung specific gpio bindings is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> --- .../devicetree/bindings/input/samsung-keypad.txt | 25 ++-------- drivers/input/keyboard/samsung-keypad.c | 52 +------------------- 2 files changed, 7 insertions(+), 70 deletions(-)