@@ -236,7 +236,7 @@ void wiiproto_req_status(struct wiimote_data *wdata)
wiimote_queue(wdata, cmd, sizeof(cmd));
}
-static void wiiproto_req_accel(struct wiimote_data *wdata, __u8 accel)
+void wiiproto_req_accel(struct wiimote_data *wdata, __u8 accel)
{
accel = !!accel;
if (accel == !!(wdata->state.flags & WIIPROTO_FLAG_ACCEL))
@@ -528,28 +528,6 @@ unlock:
return ret;
}
-static int wiimote_accel_open(struct input_dev *dev)
-{
- struct wiimote_data *wdata = input_get_drvdata(dev);
- unsigned long flags;
-
- spin_lock_irqsave(&wdata->state.lock, flags);
- wiiproto_req_accel(wdata, true);
- spin_unlock_irqrestore(&wdata->state.lock, flags);
-
- return 0;
-}
-
-static void wiimote_accel_close(struct input_dev *dev)
-{
- struct wiimote_data *wdata = input_get_drvdata(dev);
- unsigned long flags;
-
- spin_lock_irqsave(&wdata->state.lock, flags);
- wiiproto_req_accel(wdata, false);
- spin_unlock_irqrestore(&wdata->state.lock, flags);
-}
-
static int wiimote_ir_open(struct input_dev *dev)
{
struct wiimote_data *wdata = input_get_drvdata(dev);
@@ -581,6 +559,7 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = {
WIIMOD_LED2,
WIIMOD_LED3,
WIIMOD_LED4,
+ WIIMOD_ACCEL,
WIIMOD_NULL,
},
[WIIMOTE_DEV_GEN10] = (const __u8[]){
@@ -591,6 +570,7 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = {
WIIMOD_LED2,
WIIMOD_LED3,
WIIMOD_LED4,
+ WIIMOD_ACCEL,
WIIMOD_NULL,
},
[WIIMOTE_DEV_GEN20] = (const __u8[]){
@@ -601,6 +581,7 @@ static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = {
WIIMOD_LED2,
WIIMOD_LED3,
WIIMOD_LED4,
+ WIIMOD_ACCEL,
WIIMOD_NULL,
},
};
@@ -818,35 +799,17 @@ static void handler_keys(struct wiimote_data *wdata, const __u8 *payload)
static void handler_accel(struct wiimote_data *wdata, const __u8 *payload)
{
- __u16 x, y, z;
-
- if (!(wdata->state.flags & WIIPROTO_FLAG_ACCEL))
- return;
-
- /*
- * payload is: BB BB XX YY ZZ
- * Accelerometer data is encoded into 3 10bit values. XX, YY and ZZ
- * contain the upper 8 bits of each value. The lower 2 bits are
- * contained in the buttons data BB BB.
- * Bits 6 and 7 of the first buttons byte BB is the lower 2 bits of the
- * X accel value. Bit 5 of the second buttons byte is the 2nd bit of Y
- * accel value and bit 6 is the second bit of the Z value.
- * The first bit of Y and Z values is not available and always set to 0.
- * 0x200 is returned on no movement.
- */
-
- x = payload[2] << 2;
- y = payload[3] << 2;
- z = payload[4] << 2;
-
- x |= (payload[0] >> 5) & 0x3;
- y |= (payload[1] >> 4) & 0x2;
- z |= (payload[1] >> 5) & 0x2;
+ const __u8 *iter, *mods;
+ const struct wiimod_ops *ops;
- input_report_abs(wdata->accel, ABS_RX, x - 0x200);
- input_report_abs(wdata->accel, ABS_RY, y - 0x200);
- input_report_abs(wdata->accel, ABS_RZ, z - 0x200);
- input_sync(wdata->accel);
+ mods = wiimote_devtype_mods[wdata->state.devtype];
+ for (iter = mods; *iter != WIIMOD_NULL; ++iter) {
+ ops = wiimod_table[*iter];
+ if (ops->in_accel) {
+ ops->in_accel(wdata, payload);
+ break;
+ }
+ }
}
#define ir_to_input0(wdata, ir, packed) __ir_to_input((wdata), (ir), (packed), \
@@ -1133,31 +1096,9 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev)
wdata->hdev = hdev;
hid_set_drvdata(hdev, wdata);
- wdata->accel = input_allocate_device();
- if (!wdata->accel)
- goto err;
-
- input_set_drvdata(wdata->accel, wdata);
- wdata->accel->open = wiimote_accel_open;
- wdata->accel->close = wiimote_accel_close;
- wdata->accel->dev.parent = &wdata->hdev->dev;
- wdata->accel->id.bustype = wdata->hdev->bus;
- wdata->accel->id.vendor = wdata->hdev->vendor;
- wdata->accel->id.product = wdata->hdev->product;
- wdata->accel->id.version = wdata->hdev->version;
- wdata->accel->name = WIIMOTE_NAME " Accelerometer";
-
- set_bit(EV_ABS, wdata->accel->evbit);
- set_bit(ABS_RX, wdata->accel->absbit);
- set_bit(ABS_RY, wdata->accel->absbit);
- set_bit(ABS_RZ, wdata->accel->absbit);
- input_set_abs_params(wdata->accel, ABS_RX, -500, 500, 2, 4);
- input_set_abs_params(wdata->accel, ABS_RY, -500, 500, 2, 4);
- input_set_abs_params(wdata->accel, ABS_RZ, -500, 500, 2, 4);
-
wdata->ir = input_allocate_device();
if (!wdata->ir)
- goto err_ir;
+ goto err;
input_set_drvdata(wdata->ir, wdata);
wdata->ir->open = wiimote_ir_open;
@@ -1200,8 +1141,6 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev)
return wdata;
-err_ir:
- input_free_device(wdata->accel);
err:
kfree(wdata);
return NULL;
@@ -1214,7 +1153,6 @@ static void wiimote_destroy(struct wiimote_data *wdata)
cancel_work_sync(&wdata->init_worker);
wiimote_modules_unload(wdata);
- input_unregister_device(wdata->accel);
input_unregister_device(wdata->ir);
cancel_work_sync(&wdata->queue.worker);
hid_hw_close(wdata->hdev);
@@ -1255,12 +1193,6 @@ static int wiimote_hid_probe(struct hid_device *hdev,
goto err_stop;
}
- ret = input_register_device(wdata->accel);
- if (ret) {
- hid_err(hdev, "Cannot register input device\n");
- goto err_close;
- }
-
ret = input_register_device(wdata->ir);
if (ret) {
hid_err(hdev, "Cannot register input device\n");
@@ -1287,9 +1219,6 @@ err_free:
return ret;
err_ir:
- input_unregister_device(wdata->accel);
- wdata->accel = NULL;
-err_close:
hid_hw_close(hdev);
err_stop:
hid_hw_stop(hdev);
@@ -404,6 +404,128 @@ static const struct wiimod_ops wiimod_leds[4] = {
},
};
+/*
+ * Accelerometer
+ * 3 axis accelerometer data is part of nearly all DRMs. If not supported by a
+ * device, it's mostly cleared to 0. This module parses this data and provides
+ * it via a separate input device.
+ */
+
+static void wiimod_accel_in_accel(struct wiimote_data *wdata,
+ const __u8 *accel)
+{
+ __u16 x, y, z;
+
+ if (!(wdata->state.flags & WIIPROTO_FLAG_ACCEL))
+ return;
+
+ /*
+ * payload is: BB BB XX YY ZZ
+ * Accelerometer data is encoded into 3 10bit values. XX, YY and ZZ
+ * contain the upper 8 bits of each value. The lower 2 bits are
+ * contained in the buttons data BB BB.
+ * Bits 6 and 7 of the first buttons byte BB is the lower 2 bits of the
+ * X accel value. Bit 5 of the second buttons byte is the 2nd bit of Y
+ * accel value and bit 6 is the second bit of the Z value.
+ * The first bit of Y and Z values is not available and always set to 0.
+ * 0x200 is returned on no movement.
+ */
+
+ x = accel[2] << 2;
+ y = accel[3] << 2;
+ z = accel[4] << 2;
+
+ x |= (accel[0] >> 5) & 0x3;
+ y |= (accel[1] >> 4) & 0x2;
+ z |= (accel[1] >> 5) & 0x2;
+
+ input_report_abs(wdata->accel, ABS_RX, x - 0x200);
+ input_report_abs(wdata->accel, ABS_RY, y - 0x200);
+ input_report_abs(wdata->accel, ABS_RZ, z - 0x200);
+ input_sync(wdata->accel);
+}
+
+static int wiimod_accel_open(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiiproto_req_accel(wdata, true);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static void wiimod_accel_close(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiiproto_req_accel(wdata, false);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
+
+static int wiimod_accel_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ int ret;
+
+ wdata->accel = input_allocate_device();
+ if (!wdata->accel)
+ return -ENOMEM;
+
+ input_set_drvdata(wdata->accel, wdata);
+ wdata->accel->open = wiimod_accel_open;
+ wdata->accel->close = wiimod_accel_close;
+ wdata->accel->dev.parent = &wdata->hdev->dev;
+ wdata->accel->id.bustype = wdata->hdev->bus;
+ wdata->accel->id.vendor = wdata->hdev->vendor;
+ wdata->accel->id.product = wdata->hdev->product;
+ wdata->accel->id.version = wdata->hdev->version;
+ wdata->accel->name = WIIMOTE_NAME " Accelerometer";
+
+ set_bit(EV_ABS, wdata->accel->evbit);
+ set_bit(ABS_RX, wdata->accel->absbit);
+ set_bit(ABS_RY, wdata->accel->absbit);
+ set_bit(ABS_RZ, wdata->accel->absbit);
+ input_set_abs_params(wdata->accel, ABS_RX, -500, 500, 2, 4);
+ input_set_abs_params(wdata->accel, ABS_RY, -500, 500, 2, 4);
+ input_set_abs_params(wdata->accel, ABS_RZ, -500, 500, 2, 4);
+
+ ret = input_register_device(wdata->accel);
+ if (ret) {
+ hid_err(wdata->hdev, "cannot register input device\n");
+ goto err_free;
+ }
+
+ return 0;
+
+err_free:
+ input_free_device(wdata->accel);
+ wdata->accel = NULL;
+ return ret;
+}
+
+static void wiimod_accel_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ if (!wdata->accel)
+ return;
+
+ input_unregister_device(wdata->accel);
+ wdata->accel = NULL;
+}
+
+static const struct wiimod_ops wiimod_accel = {
+ .flags = 0,
+ .arg = 0,
+ .probe = wiimod_accel_probe,
+ .remove = wiimod_accel_remove,
+ .in_accel = wiimod_accel_in_accel,
+};
+
/* module table */
const struct wiimod_ops *wiimod_table[WIIMOD_NUM] = {
@@ -414,4 +536,5 @@ const struct wiimod_ops *wiimod_table[WIIMOD_NUM] = {
[WIIMOD_LED2] = &wiimod_leds[1],
[WIIMOD_LED3] = &wiimod_leds[2],
[WIIMOD_LED4] = &wiimod_leds[3],
+ [WIIMOD_ACCEL] = &wiimod_accel,
};
@@ -133,6 +133,7 @@ enum wiimod_module {
WIIMOD_LED2,
WIIMOD_LED3,
WIIMOD_LED4,
+ WIIMOD_ACCEL,
WIIMOD_NUM,
WIIMOD_NULL = WIIMOD_NUM,
};
@@ -191,6 +192,7 @@ extern void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm);
extern void wiiproto_req_rumble(struct wiimote_data *wdata, __u8 rumble);
extern void wiiproto_req_leds(struct wiimote_data *wdata, int leds);
extern void wiiproto_req_status(struct wiimote_data *wdata);
+extern void wiiproto_req_accel(struct wiimote_data *wdata, __u8 accel);
extern int wiimote_cmd_write(struct wiimote_data *wdata, __u32 offset,
const __u8 *wmem, __u8 size);
extern ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset,
Accelerometer data is very similar to KEYS handling. Therefore, convert all ACCEL related handling into a sub-device module similar to KEYS. This doesn't change any semantics but only moves code over to wiimote-modules. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> --- drivers/hid/hid-wiimote-core.c | 101 +++++-------------------------- drivers/hid/hid-wiimote-modules.c | 123 ++++++++++++++++++++++++++++++++++++++ drivers/hid/hid-wiimote.h | 2 + 3 files changed, 140 insertions(+), 86 deletions(-)