@@ -20,8 +20,8 @@
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/regmap.h>
-
-#include <linux/input/pmic8xxx-keypad.h>
+#include <linux/of.h>
+#include <linux/input/matrix_keypad.h>
#define PM8XXX_MAX_ROWS 18
#define PM8XXX_MAX_COLS 8
@@ -84,7 +84,8 @@
/**
* struct pmic8xxx_kp - internal keypad data structure
- * @pdata - keypad platform data pointer
+ * @num_cols - number of columns of keypad
+ * @num_rows - number of row of keypad
* @input - input device pointer for keypad
* @regmap - regmap handle
* @key_sense_irq - key press/release irq number
@@ -96,7 +97,8 @@
* @ctrl_reg - control register value
*/
struct pmic8xxx_kp {
- const struct pm8xxx_keypad_platform_data *pdata;
+ unsigned int num_rows;
+ unsigned int num_cols;
struct input_dev *input;
struct regmap *regmap;
int key_sense_irq;
@@ -115,9 +117,9 @@ static u8 pmic8xxx_col_state(struct pmic8xxx_kp *kp, u8 col)
{
/* all keys pressed on that particular row? */
if (col == 0x00)
- return 1 << kp->pdata->num_cols;
+ return 1 << kp->num_cols;
else
- return col & ((1 << kp->pdata->num_cols) - 1);
+ return col & ((1 << kp->num_cols) - 1);
}
/*
@@ -180,10 +182,10 @@ static int pmic8xxx_kp_read_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
int rc, read_rows;
unsigned int scan_val;
- if (kp->pdata->num_rows < PM8XXX_MIN_ROWS)
+ if (kp->num_rows < PM8XXX_MIN_ROWS)
read_rows = PM8XXX_MIN_ROWS;
else
- read_rows = kp->pdata->num_rows;
+ read_rows = kp->num_rows;
pmic8xxx_chk_sync_read(kp);
@@ -227,13 +229,13 @@ static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
{
int row, col, code;
- for (row = 0; row < kp->pdata->num_rows; row++) {
+ for (row = 0; row < kp->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
- for (col = 0; col < kp->pdata->num_cols; col++) {
+ for (col = 0; col < kp->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
@@ -259,9 +261,9 @@ static bool pmic8xxx_detect_ghost_keys(struct pmic8xxx_kp *kp, u16 *new_state)
u16 check, row_state;
check = 0;
- for (row = 0; row < kp->pdata->num_rows; row++) {
+ for (row = 0; row < kp->num_rows; row++) {
row_state = (~new_state[row]) &
- ((1 << kp->pdata->num_cols) - 1);
+ ((1 << kp->num_cols) - 1);
if (hweight16(row_state) > 1) {
if (found_first == -1)
@@ -369,8 +371,13 @@ static irqreturn_t pmic8xxx_kp_irq(int irq, void *data)
return IRQ_HANDLED;
}
-static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp)
+static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp,
+ struct platform_device *pdev)
{
+ const struct device_node *of_node = pdev->dev.of_node;
+ unsigned int scan_delay_ms;
+ unsigned int row_hold_ns;
+ unsigned int debounce_ms;
int bits, rc, cycles;
u8 scan_val = 0, ctrl_val = 0;
static const u8 row_bits[] = {
@@ -378,18 +385,18 @@ static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp)
};
/* Find column bits */
- if (kp->pdata->num_cols < KEYP_CTRL_SCAN_COLS_MIN)
+ if (kp->num_cols < KEYP_CTRL_SCAN_COLS_MIN)
bits = 0;
else
- bits = kp->pdata->num_cols - KEYP_CTRL_SCAN_COLS_MIN;
+ bits = kp->num_cols - KEYP_CTRL_SCAN_COLS_MIN;
ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) <<
KEYP_CTRL_SCAN_COLS_SHIFT;
/* Find row bits */
- if (kp->pdata->num_rows < KEYP_CTRL_SCAN_ROWS_MIN)
+ if (kp->num_rows < KEYP_CTRL_SCAN_ROWS_MIN)
bits = 0;
else
- bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN];
+ bits = row_bits[kp->num_rows - KEYP_CTRL_SCAN_ROWS_MIN];
ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT);
@@ -399,15 +406,44 @@ static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp)
return rc;
}
- bits = (kp->pdata->debounce_ms / 5) - 1;
+ if (of_property_read_u32(of_node, "scan-delay", &scan_delay_ms))
+ scan_delay_ms = MIN_SCAN_DELAY;
+
+ if (scan_delay_ms > MAX_SCAN_DELAY || scan_delay_ms < MIN_SCAN_DELAY ||
+ !is_power_of_2(scan_delay_ms)) {
+ dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(of_node, "row-hold", &row_hold_ns))
+ row_hold_ns = MIN_ROW_HOLD_DELAY;
+
+ if (row_hold_ns > MAX_ROW_HOLD_DELAY ||
+ row_hold_ns < MIN_ROW_HOLD_DELAY ||
+ ((row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
+ dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(of_node, "debounce", &debounce_ms))
+ debounce_ms = MIN_DEBOUNCE_TIME;
+
+ if (((debounce_ms % 5) != 0) ||
+ debounce_ms > MAX_DEBOUNCE_TIME ||
+ debounce_ms < MIN_DEBOUNCE_TIME) {
+ dev_err(&pdev->dev, "invalid debounce time supplied\n");
+ return -EINVAL;
+ }
+
+ bits = (debounce_ms / 5) - 1;
scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT);
- bits = fls(kp->pdata->scan_delay_ms) - 1;
+ bits = fls(scan_delay_ms) - 1;
scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT);
/* Row hold time is a multiple of 32KHz cycles. */
- cycles = (kp->pdata->row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC;
+ cycles = (row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC;
scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT);
@@ -459,6 +495,13 @@ static void pmic8xxx_kp_close(struct input_dev *dev)
pmic8xxx_kp_disable(kp);
}
+static const struct of_device_id pm8xxx_match_table[] = {
+ { .compatible = "qcom,pm8058-keypad" },
+ { .compatible = "qcom,pm8921-keypad" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pm8xxx_match_table);
+
/*
* keypad controller should be initialized in the following sequence
* only, otherwise it might get into FSM stuck state.
@@ -471,50 +514,27 @@ static void pmic8xxx_kp_close(struct input_dev *dev)
*/
static int pmic8xxx_kp_probe(struct platform_device *pdev)
{
- const struct pm8xxx_keypad_platform_data *pdata =
- dev_get_platdata(&pdev->dev);
- const struct matrix_keymap_data *keymap_data;
+ unsigned int rows, cols;
+ bool repeat;
+ bool wakeup;
struct pmic8xxx_kp *kp;
int rc;
unsigned int ctrl_val;
- if (!pdata || !pdata->num_cols || !pdata->num_rows ||
- pdata->num_cols > PM8XXX_MAX_COLS ||
- pdata->num_rows > PM8XXX_MAX_ROWS ||
- pdata->num_cols < PM8XXX_MIN_COLS) {
- dev_err(&pdev->dev, "invalid platform data\n");
- return -EINVAL;
- }
-
- if (!pdata->scan_delay_ms ||
- pdata->scan_delay_ms > MAX_SCAN_DELAY ||
- pdata->scan_delay_ms < MIN_SCAN_DELAY ||
- !is_power_of_2(pdata->scan_delay_ms)) {
- dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
- return -EINVAL;
- }
-
- if (!pdata->row_hold_ns ||
- pdata->row_hold_ns > MAX_ROW_HOLD_DELAY ||
- pdata->row_hold_ns < MIN_ROW_HOLD_DELAY ||
- ((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
- dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
- return -EINVAL;
- }
+ rc = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
+ if (rc)
+ return rc;
- if (!pdata->debounce_ms ||
- ((pdata->debounce_ms % 5) != 0) ||
- pdata->debounce_ms > MAX_DEBOUNCE_TIME ||
- pdata->debounce_ms < MIN_DEBOUNCE_TIME) {
- dev_err(&pdev->dev, "invalid debounce time supplied\n");
+ if (cols > PM8XXX_MAX_COLS || rows > PM8XXX_MAX_ROWS ||
+ cols < PM8XXX_MIN_COLS) {
+ dev_err(&pdev->dev, "invalid platform data\n");
return -EINVAL;
}
- keymap_data = pdata->keymap_data;
- if (!keymap_data) {
- dev_err(&pdev->dev, "no keymap data supplied\n");
- return -EINVAL;
- }
+ repeat = !of_property_read_bool(pdev->dev.of_node,
+ "linux,input-no-autorepeat");
+ wakeup = !of_property_read_bool(pdev->dev.of_node,
+ "linux,keypad-wakeup");
kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
if (!kp)
@@ -526,7 +546,8 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, kp);
- kp->pdata = pdata;
+ kp->num_rows = rows;
+ kp->num_cols = cols;
kp->dev = &pdev->dev;
kp->input = devm_input_allocate_device(&pdev->dev);
@@ -547,8 +568,8 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
return kp->key_stuck_irq;
}
- kp->input->name = pdata->input_name ? : "PMIC8XXX keypad";
- kp->input->phys = pdata->input_phys_device ? : "pmic8xxx_keypad/input0";
+ kp->input->name = "PMIC8XXX keypad";
+ kp->input->phys = "pmic8xxx_keypad/input0";
kp->input->id.bustype = BUS_I2C;
kp->input->id.version = 0x0001;
@@ -558,7 +579,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
kp->input->open = pmic8xxx_kp_open;
kp->input->close = pmic8xxx_kp_close;
- rc = matrix_keypad_build_keymap(keymap_data, NULL,
+ rc = matrix_keypad_build_keymap(NULL, NULL,
PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS,
kp->keycodes, kp->input);
if (rc) {
@@ -566,7 +587,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
return rc;
}
- if (pdata->rep)
+ if (repeat)
__set_bit(EV_REP, kp->input->evbit);
input_set_capability(kp->input, EV_MSC, MSC_SCAN);
@@ -576,7 +597,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
memset(kp->keystate, 0xff, sizeof(kp->keystate));
memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));
- rc = pmic8xxx_kpd_init(kp);
+ rc = pmic8xxx_kpd_init(kp, pdev);
if (rc < 0) {
dev_err(&pdev->dev, "unable to initialize keypad controller\n");
return rc;
@@ -612,7 +633,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
return rc;
}
- device_init_wakeup(&pdev->dev, pdata->wakeup);
+ device_init_wakeup(&pdev->dev, wakeup);
return 0;
}
@@ -665,9 +686,10 @@ static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops,
static struct platform_driver pmic8xxx_kp_driver = {
.probe = pmic8xxx_kp_probe,
.driver = {
- .name = PM8XXX_KEYPAD_DEV_NAME,
+ .name = "pm8xxx-keypad",
.owner = THIS_MODULE,
.pm = &pm8xxx_kp_pm_ops,
+ .of_match_table = pm8xxx_match_table,
},
};
module_platform_driver(pmic8xxx_kp_driver);
deleted file mode 100644
@@ -1,52 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __PMIC8XXX_KEYPAD_H__
-#define __PMIC8XXX_KEYPAD_H__
-
-#include <linux/input/matrix_keypad.h>
-
-#define PM8XXX_KEYPAD_DEV_NAME "pm8xxx-keypad"
-
-/**
- * struct pm8xxx_keypad_platform_data - platform data for keypad
- * @keymap_data - matrix keymap data
- * @input_name - input device name
- * @input_phys_device - input device name
- * @num_cols - number of columns of keypad
- * @num_rows - number of row of keypad
- * @debounce_ms - debounce period in milliseconds
- * @scan_delay_ms - scan delay in milliseconds
- * @row_hold_ns - row hold period in nanoseconds
- * @wakeup - configure keypad as wakeup
- * @rep - enable or disable key repeat bit
- */
-struct pm8xxx_keypad_platform_data {
- const struct matrix_keymap_data *keymap_data;
-
- const char *input_name;
- const char *input_phys_device;
-
- unsigned int num_cols;
- unsigned int num_rows;
- unsigned int rows_gpio_start;
- unsigned int cols_gpio_start;
-
- unsigned int debounce_ms;
- unsigned int scan_delay_ms;
- unsigned int row_hold_ns;
-
- bool wakeup;
- bool rep;
-};
-
-#endif /*__PMIC8XXX_KEYPAD_H__ */
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> --- drivers/input/keyboard/pmic8xxx-keypad.c | 150 ++++++++++++++++++------------- include/linux/input/pmic8xxx-keypad.h | 52 ----------- 2 files changed, 86 insertions(+), 116 deletions(-) delete mode 100644 include/linux/input/pmic8xxx-keypad.h