| Message ID | 1425369498-25541-4-git-send-email-mpa@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 03/03/15 07:58, Markus Pargmann wrote: > This is the touchscreen conversion queue binding documentation. It uses > the shared imx25 ADC. > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Looks fine, one more general binding approach comment though. A lot of the vendor specific elements in here are awfully generic. Does it not make sense to have them as standard attributes for touch screen drivers? > --- > > Notes: > Changes in v5: > - Fix signed/unsigned comparison > - Fix unused variable settling_time by putting it in the correct argument list > - Use continous conversion queue with the repeat feature and a proper > repeat-wait. Previously the touchscreen caused massive number of interrupts. > > .../bindings/input/touchscreen/fsl-mx25-tcq.txt | 29 ++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt > new file mode 100644 > index 000000000000..4214a99d197a > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt > @@ -0,0 +1,29 @@ > +Freescale mx25 TS conversion queue module > + > +mx25 touchscreen conversion queue module which controls the ADC unit of the > +mx25 for attached touchscreens. > + > +Required properties: > + - compatible: Should be "fsl,imx25-tcq". > + - reg: Memory range of the device. > + - interrupts: Should be the interrupt number associated with this module within > + the tscadc unit (<0>). > + - interrupt-parent: Should be a phandle to the tscadc unit. > + - fsl,wires: Should be '<4>' or '<5>' > + > +Optional properties: > + - fsl,pen-debounce: Pen debounce time. > + - fsl,pen-threshold: Pen-down threshold for the touchscreen. > + - fsl,settling-time: Settling time in nanoseconds. Obviously it's up to Dmitry etc, but are these not standard enough attributes to not be vendor specific? I'd expect say touch-pen-debouce and touch-pen-threshold etc to be standard binding elements for touch screens. > + > +This device includes two conversion queues which can be added as subnodes. > +The first queue is for the touchscreen, the second for general purpose ADC. > + > +Example: > + tsc: tcq@50030400 { > + compatible = "fsl,imx25-tcq"; > + reg = <0x50030400 0x60>; > + interrupt-parent = <&tscadc>; > + interrupts = <0>; > + fsl,wires = <4>; > + }; > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Mar 07, 2015 at 05:37:04PM +0000, Jonathan Cameron wrote: > On 03/03/15 07:58, Markus Pargmann wrote: > > This is the touchscreen conversion queue binding documentation. It uses > > the shared imx25 ADC. > > > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > Looks fine, one more general binding approach comment though. > A lot of the vendor specific elements in here are awfully generic. > Does it not make sense to have them as standard attributes for > touch screen drivers? > > --- > > > > Notes: > > Changes in v5: > > - Fix signed/unsigned comparison > > - Fix unused variable settling_time by putting it in the correct argument list > > - Use continous conversion queue with the repeat feature and a proper > > repeat-wait. Previously the touchscreen caused massive number of interrupts. > > > > .../bindings/input/touchscreen/fsl-mx25-tcq.txt | 29 ++++++++++++++++++++++ > > 1 file changed, 29 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt > > > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt > > new file mode 100644 > > index 000000000000..4214a99d197a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt > > @@ -0,0 +1,29 @@ > > +Freescale mx25 TS conversion queue module > > + > > +mx25 touchscreen conversion queue module which controls the ADC unit of the > > +mx25 for attached touchscreens. > > + > > +Required properties: > > + - compatible: Should be "fsl,imx25-tcq". > > + - reg: Memory range of the device. > > + - interrupts: Should be the interrupt number associated with this module within > > + the tscadc unit (<0>). > > + - interrupt-parent: Should be a phandle to the tscadc unit. > > + - fsl,wires: Should be '<4>' or '<5>' > > + > > +Optional properties: > > + - fsl,pen-debounce: Pen debounce time. > > + - fsl,pen-threshold: Pen-down threshold for the touchscreen. > > + - fsl,settling-time: Settling time in nanoseconds. > Obviously it's up to Dmitry etc, but are these not standard enough attributes to > not be vendor specific? I'd expect say touch-pen-debouce and touch-pen-threshold > etc to be standard binding elements for touch screens. Seems like a good idea. I just discovered that there is a 'touchscreen-fuzz-pressure' which seems to be the same as fsl,pen-threshold. So this should be replaced in my patches. The other properties do not exist. Dmitry, what do you think about some standard properties for the remaining? Best Regards, Markus
diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt new file mode 100644 index 000000000000..4214a99d197a --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt @@ -0,0 +1,29 @@ +Freescale mx25 TS conversion queue module + +mx25 touchscreen conversion queue module which controls the ADC unit of the +mx25 for attached touchscreens. + +Required properties: + - compatible: Should be "fsl,imx25-tcq". + - reg: Memory range of the device. + - interrupts: Should be the interrupt number associated with this module within + the tscadc unit (<0>). + - interrupt-parent: Should be a phandle to the tscadc unit. + - fsl,wires: Should be '<4>' or '<5>' + +Optional properties: + - fsl,pen-debounce: Pen debounce time. + - fsl,pen-threshold: Pen-down threshold for the touchscreen. + - fsl,settling-time: Settling time in nanoseconds. + +This device includes two conversion queues which can be added as subnodes. +The first queue is for the touchscreen, the second for general purpose ADC. + +Example: + tsc: tcq@50030400 { + compatible = "fsl,imx25-tcq"; + reg = <0x50030400 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <0>; + fsl,wires = <4>; + };
This is the touchscreen conversion queue binding documentation. It uses the shared imx25 ADC. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> --- Notes: Changes in v5: - Fix signed/unsigned comparison - Fix unused variable settling_time by putting it in the correct argument list - Use continous conversion queue with the repeat feature and a proper repeat-wait. Previously the touchscreen caused massive number of interrupts. .../bindings/input/touchscreen/fsl-mx25-tcq.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt