| Message ID | 1430217358-7978-1-git-send-email-hn.chen@weidahitech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Hn, On Tue, Apr 28, 2015 at 06:35:58PM +0800, HungNien Chen wrote: > Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Thank you for your submission, please find my comments below. > --- > drivers/input/touchscreen/Kconfig | 12 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/wdt87xx_i2c.c | 1501 +++++++++++++++++++++++++++++++ > 3 files changed, 1514 insertions(+) > create mode 100644 drivers/input/touchscreen/wdt87xx_i2c.c > > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index 80f6386..0c1a6cc 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -658,6 +658,18 @@ config TOUCHSCREEN_PIXCIR > To compile this driver as a module, choose M here: the > module will be called pixcir_i2c_ts. > > +config TOUCHSCREEN_WDT87XX_I2C > + tristate "Weida HiTech I2C touchscreen" > + depends on I2C > + help > + Say Y here if you have an Weida WDT87XX I2C touchscreen > + connected to your system. > + > + If unsure, say N. > + > + To compile this driver as a module, choose M here: the > + module will be called wdt87xx_i2c. > + > config TOUCHSCREEN_WM831X > tristate "Support for WM831x touchscreen controllers" > depends on MFD_WM831X > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > index 44deea7..fa3d33b 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -72,6 +72,7 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o > obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o > obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o > obj-$(CONFIG_TOUCHSCREEN_WACOM_I2C) += wacom_i2c.o > +obj-$(CONFIG_TOUCHSCREEN_WDT87XX_I2C) += wdt87xx_i2c.o > obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o > obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o > wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o > diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c > new file mode 100644 > index 0000000..c79439c > --- /dev/null > +++ b/drivers/input/touchscreen/wdt87xx_i2c.c > @@ -0,0 +1,1501 @@ > +/* > + * drivers/input/touchscreen/wdt87xx_i2c.c No need to mention file name in comments. > + * > + * Weida HiTech WDT87xx TouchScreen I2C driver > + * > + * Copyright (c) 2014 Weida HiTech Ltd. > + * HN Chen <hn.chen@weidahitech.com> > + * > + * This software is licensed under the terms of the GNU General Public > + * License, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * Note: this is a I2C device driver and report touch events througt the > + * input device > + */ > + > + > +#include <linux/version.h> > +#include <linux/i2c.h> > +#include <linux/input.h> > +#include <linux/interrupt.h> > +#include <linux/delay.h> > +#include <linux/gpio.h> > +#include <linux/irq.h> > +#include <linux/ioc4.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/proc_fs.h> > +#include <linux/slab.h> > +#include <linux/firmware.h> > +#include <linux/gpio.h> > +#include <linux/input/mt.h> > +#include <asm/unaligned.h> > + > +#ifdef CONFIG_ACPI No need to guard, just include. > +#include <linux/acpi.h> > +#endif > + > +#define WDT87XX_NAME "wdt87xx_i2c" > +#define WDT87XX_DRV_VER "0.9.1" > +#define WDT87XX_FW_NAME "wdt87xx_fw.bin" > + > +#define WDT87XX_FW 1 > +#define WDT87XX_CFG 2 > + > +#define MODE_ACTIVE 0x01 > +#define MODE_READY 0x02 > +#define MODE_IDLE 0x03 > +#define MODE_SLEEP 0x04 > +#define MODE_STOP 0xFF > + > +#define WDT_MAX_POINT 10 > +#define WDT_RAW_BUF_COUNT 54 > + > +#define PG_SIZE 0x1000 > +#define MAX_RETRIES 3 > + > +#define WDT_UNITS_PER_MM 60 > + > +/* the definition for one touch point */ > +struct wdt_touch_point_event_st { Please do not put 2 spaces between "struct" and it's name and also please do not add "_st" suffixes to your structures. > + unsigned char id; > + unsigned short x; > + unsigned short y; > +} __packed; Hmm, this is on-wire structure, right? I guess x and y must be little-endian on wire. You need to convert them to CPU endianness before using, or the driver will break on big-endian devices. Also, x and y are likely not naturally aligned so you probably want to use get_unaligned_le16() when reading them or or may encounter issues on some boards. Because of that I'd rather you did not define wdt_touch_point_event_st structure but defined offsets for ID, X and Y and use them to fetch data from character buffer where you read the data from the device. > + > + > +/* the definition for a packet */ > +struct wdt_touch_events_st { > + unsigned char report_id; > + struct wdt_touch_point_event_st touch_event[WDT_MAX_POINT]; > + unsigned short scan_time; > + unsigned char num_touches; > +} __packed; > + > +/* the definition for the chip parameters */ > +struct sys_param_st { > + unsigned short fw_id; > + unsigned short plat_id; > + unsigned short xmls_id1; > + unsigned short xmls_id2; > + unsigned short phy_x; > + unsigned short phy_y; > +} __packed; > + > +/* the definition for this driver needed */ > +struct wdt87xx_ts_data { > + struct i2c_client *client; > + struct input_dev *input_dev; > +/* to protect the operation in sysfs */ > + struct mutex sysfs_mutex; > + unsigned int max_retries; > + struct sys_param_st sys_param; > +}; > + > +/* communacation commands */ > +#define PACKET_SIZE 56 > +#define VND_REQ_READ 0x06 > +#define VND_READ_DATA 0x07 > +#define VND_REQ_WRITE 0x08 > + > +#define VND_CMD_START 0x00 > +#define VND_CMD_STOP 0x01 > +#define VND_CMD_RESET 0x09 > + > +#define VND_CMD_ERASE 0x1A > + > +#define VND_GET_CHECKSUM 0x66 > + > +#define VND_SET_DATA 0x83 > +#define VND_SET_COMMAND_DATA 0x84 > +#define VND_SET_CHECKSUM_CALC 0x86 > +#define VND_SET_CHECKSUM_LENGTH 0x87 > + > +#define VND_CMD_SFLCK 0xFC > +#define VND_CMD_SFUNL 0xFD > + > +#define STRIDX_PLATFORM_ID 0x80 > +#define STRIDX_PARAMETERS 0x81 > + > + > +/* the definition of command structure */ > +union cmd_data_un { > + struct { > + char report_id; > + char type; > + unsigned short index; > + unsigned int length; > + } defined_data; > + char buffer[8]; > +}; > + > +/* the definition of packet structure */ > +union req_data_un { > + struct { > + char report_id; > + char type; > + unsigned short index; > + unsigned int length; > + char data[PACKET_SIZE]; > + } defined_data; > + char buffer[64]; > +}; > + > +/* the definition of firmware data structure */ > +struct chunk_info_st { > + unsigned int target_start_addr; > + unsigned int length; > + unsigned int source_start_addr; > + unsigned int version_number; > + unsigned int attribute; > + unsigned int temp; > +}; > + > +struct chunk_data_st { > + unsigned int ck_id; > + unsigned int ck_size; > + struct chunk_info_st chunk_info; > + char *chunk_data; > +}; > + > +struct format_chunk_st { > + unsigned int ck_id; > + unsigned int ck_size; > + unsigned int number_chunk; > + unsigned int enable_flag; > + unsigned int checksum; > + unsigned int temp1; > + unsigned int temp2; > +}; > + > +struct chunk_info_ex_st { > + struct chunk_info_st chunk_info; > + char *data; > + unsigned int length; > +}; > + > +/* the definition of firmware chunk tags */ > +#define FOURCC_ID_RIFF 0x46464952 > +#define FOURCC_ID_WHIF 0x46494857 > +#define FOURCC_ID_FRMT 0x544D5246 > +#define FOURCC_ID_FRWR 0x52575246 > +#define FOURCC_ID_CNFG 0x47464E43 > + > +#define CHUNK_ID_FRMT 0x00 > +#define CHUNK_ID_FRWR 0x01 > +#define CHUNK_ID_CNFG 0x02 > + > +/* the definition of gpio & data irq */ > +#ifndef CONFIG_ACPI > +/* > + * for kernel version >= 3.18.0, the gpio number is 338 > + * #define DINT_GPIO_NUM 338 > + */ > +#define DINT_GPIO_NUM 82 > +#endif > + > +/* for the touch report */ > +static int SCREEN_LOGICAL_MAX_X = 0x7FFF; > +static int SCREEN_LOGICAL_MAX_Y = 0x7FFF; > + > +/* output the error message */ > +#define dev_err(__dev, x...) dev_err(__dev, x) > + > +static int wdt87xx_i2c_txrxdata(struct i2c_client *client, char *txdata, > + int txlen, char *rxdata, int rxlen); > +static int wdt87xx_i2c_rxdata(struct i2c_client *client, char *rxdata, > + int length); > +static int wdt87xx_i2c_txdata(struct i2c_client *client, char *txdata, > + int length); > +static int wdt87xx_set_feature(struct i2c_client *client, char *buf, > + unsigned int buf_size); > +static int wdt87xx_get_feature(struct i2c_client *client, char *buf, > + unsigned int buf_size); > +static int wdt87xx_get_string(struct i2c_client *client, char str_idx, > + char *buf, unsigned int buf_size); > + > +static unsigned int get_chunk_fourcc(unsigned int chunk_index) > +{ > + switch (chunk_index) { > + case CHUNK_ID_FRMT: > + return FOURCC_ID_FRMT; > + case CHUNK_ID_FRWR: > + return FOURCC_ID_FRWR; > + case CHUNK_ID_CNFG: > + return FOURCC_ID_CNFG; > + default: > + return 0; > + } > + return 0; > +} > + > +static int get_chunk_info(const struct firmware *fw, unsigned int chunk_index, > + struct chunk_info_ex_st *chunk_info_ex, > + struct format_chunk_st *format_chunk) > +{ > + unsigned int chunk_four_cc; > + const char *data = 0; > + unsigned int data_len = 0; > + unsigned int is_found = 0; > + > + /* check the pointer is null */ > + if (!fw || !chunk_info_ex || !format_chunk) > + return -EINVAL; > + > + chunk_four_cc = get_chunk_fourcc(chunk_index); > + > + if (!chunk_four_cc) > + return -EBADRQC; > + > + data = fw->data; > + data_len = fw->size; > + > + /* check if the chunk is existed */ > + if (format_chunk->enable_flag | chunk_index) { > + unsigned int chunk_start_pos = 12 > + + sizeof(struct format_chunk_st); > + struct chunk_data_st *chunk_data = 0; > + > + while (chunk_start_pos < data_len && !is_found) { > + chunk_data = (struct chunk_data_st *) > + &data[chunk_start_pos]; > + > + /* the chunk is found */ > + if (chunk_data->ck_id == chunk_four_cc) { > + memcpy((void *) &chunk_info_ex->chunk_info, > + (void *) &chunk_data->chunk_info, > + sizeof(struct chunk_info_st)); > + chunk_info_ex->length = > + chunk_data->chunk_info.length; > + chunk_info_ex->data = > + (char *) &data[chunk_start_pos + 8 > + + sizeof(struct chunk_info_st)]; > + > + is_found = 1; > + } else { > + chunk_start_pos = chunk_start_pos > + + chunk_data->ck_size + 8; > + } > + } > + } > + > + if (is_found) > + return 0; > + > + return -ENODATA; > +} > + > +static int wdt87xx_get_sysparam(struct i2c_client *client, > + struct wdt87xx_ts_data *dev_wdt87xx) > +{ > + struct sys_param_st *sys_param = &dev_wdt87xx->sys_param; > + char buffer[72]; > + unsigned int *u32_data; > + int err = 0; > + > + err = wdt87xx_get_string(client, STRIDX_PARAMETERS, buffer, 32); > + if (err) { > + dev_err(&client->dev, "get parameters error (%d)\n", err); > + return err; > + } > + > + memcpy((void *) &dev_wdt87xx->sys_param, buffer, No need to cast pointers to void in C. > + sizeof(struct sys_param_st)); You can't just copy on-wire data into kernel structures unless you are treating it as stream of bytes and you do not. Integers wider than 8 bytes need to be converted to CPU-endianness. > + > + err = wdt87xx_get_string(client, STRIDX_PLATFORM_ID, buffer, 8); > + if (err) { > + dev_err(&client->dev, "get platform id error (%d)\n", err); > + return err; > + } > + > + dev_wdt87xx->sys_param.plat_id = buffer[1]; > + > + buffer[0] = 0xf2; > + err = wdt87xx_get_feature(client, buffer, 16); > + if (err) { > + dev_err(&client->dev, "get firmware id error (%d)\n", err); > + return err; > + } > + > + if (buffer[0] != 0xf2) { > + dev_err(&client->dev, "fw id packet error !\n"); > + return -EBADRQC; > + } > + > + u32_data = (unsigned int *) &buffer[1]; > + sys_param->fw_id = ((*u32_data) & 0xFFFF); sys_param->fw_id = get_unaligned_le16(&buffer[3]); ? > + > + dev_err(&client->dev, "fw_id: 0x%x, plat_id: 0x%x\n", > + sys_param->fw_id, sys_param->plat_id); > + dev_err(&client->dev, "xml_id1: %4x, xml_id2: %4x\n", > + sys_param->xmls_id1, sys_param->xmls_id2); > + > + return 0; > +} > + > +int process_fw_data(struct i2c_client *client, const struct firmware *fw, > + struct format_chunk_st *format_chunk) > +{ > + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); > + unsigned int length = 0; > + struct chunk_info_ex_st chunk_info_ex; > + int err = 0; > + unsigned int *u32_data; > + char fw_id; > + char chip_id; > + > + /* check the pointer is null */ > + if (!fw || !format_chunk) > + return -EINVAL; > + > + u32_data = (unsigned int *) fw->data; > + length = fw->size; > + > + if (u32_data[0] != FOURCC_ID_RIFF || u32_data[2] != FOURCC_ID_WHIF) { > + dev_err(&client->dev, "Check data tag failed !\n"); > + return -EBADRQC; > + } > + > + /* the length should be equal */ > + if (length != u32_data[1]) { > + dev_err(&client->dev, "Check data length failed !\n"); > + return -EINVAL; > + } > + > + memcpy(format_chunk, &u32_data[3], sizeof(struct format_chunk_st)); > + > + dev_dbg(&client->dev, "version checking\n"); > + > + /* get the version number from the firmware */ > + err = get_chunk_info(fw, CHUNK_ID_FRWR, &chunk_info_ex, > + format_chunk); > + if (err) { > + dev_err(&client->dev, "can not extract data !\n"); > + return -EBADR; > + } > + > + fw_id = ((chunk_info_ex.chunk_info.version_number >> 12) & 0xF); > + chip_id = (((dev_wdt87xx->sys_param.fw_id) >> 12) & 0xF); > + > + if (fw_id != chip_id) { > + wdt87xx_get_sysparam(client, dev_wdt87xx); > + chip_id = (((dev_wdt87xx->sys_param.fw_id) >> 12) & 0xF); > + > + if (fw_id != chip_id) { > + dev_err(&client->dev, "FW is not match: "); > + dev_err(&client->dev, "fw(%d), chip(%d)\n", > + fw_id, chip_id); > + return -ENODEV; > + } > + } > + > + return 0; > +} > + > +/* functions for the sysfs implementation */ > +static int wdt87xx_check_firmware(struct chunk_info_ex_st *chunk_info_ex, > + int ck_id) > +{ > + /* check the pointer is null */ > + if (!chunk_info_ex) > + return -EINVAL; > + > + if (ck_id == CHUNK_ID_FRWR) { > + unsigned int is_found = 0; > + unsigned char firmware_id[] = { 0xf5, 0x68, 0xe3, 0xa9 }; > + > + if (memcmp(chunk_info_ex->data, firmware_id, 4) == 0) > + is_found = 1; > + else > + return -EFAULT; > + > + if (is_found) > + return 0; > + } > + > + return 0; > +} > + > +static int wdt87xx_set_feature(struct i2c_client *client, char *buf, > + unsigned int buf_size) > +{ > + int err = 0; > + union req_data_un *req_data = (union req_data_un *) buf; > + int data_len = 0; > + /* for set/get packets used */ > + unsigned char xfer_buffer[80]; > + > + /* buffer size must be smaller than 64 */ > + if (buf_size > 64) > + buf_size = 64; > + > + /* set feature command packet */ > + xfer_buffer[data_len++] = 0x22; > + xfer_buffer[data_len++] = 0x00; > + if (req_data->defined_data.report_id > 0xF) { > + xfer_buffer[data_len++] = 0x30; > + xfer_buffer[data_len++] = 0x03; > + xfer_buffer[data_len++] = (req_data->defined_data.report_id); > + } else { > + xfer_buffer[data_len++] = 0x30 | > + (req_data->defined_data.report_id); > + xfer_buffer[data_len++] = 0x03; > + } > + xfer_buffer[data_len++] = 0x23; > + xfer_buffer[data_len++] = 0x00; > + xfer_buffer[data_len++] = (buf_size & 0xFF); > + xfer_buffer[data_len++] = ((buf_size & 0xFF00) >> 8); > + > + memcpy(&xfer_buffer[data_len], buf, buf_size); > + > + err = wdt87xx_i2c_txdata(client, xfer_buffer, data_len + buf_size); > + > + if (err < 0) { > + dev_err(&client->dev, "error no: (%d)\n", err); > + return err; > + } > + > + mdelay(2); > + > + return 0; > +} > + > +static int wdt87xx_get_feature(struct i2c_client *client, char *buf, > + unsigned int buf_size) > +{ > + int err = 0; > + char tx_buffer[8]; > + char xfer_buffer[80]; > + union req_data_un *req_data = (union req_data_un *) buf; > + int data_len = 0; > + unsigned int xfer_length = 0; > + > + if (buf_size > 64) > + buf_size = 64; > + > + /* get feature command packet */ > + tx_buffer[data_len++] = 0x22; > + tx_buffer[data_len++] = 0x00; > + if (req_data->defined_data.report_id > 0xF) { > + tx_buffer[data_len++] = 0x30; > + tx_buffer[data_len++] = 0x02; > + tx_buffer[data_len++] = (req_data->defined_data.report_id); > + } else { > + tx_buffer[data_len++] = 0x30 | > + (req_data->defined_data.report_id); > + tx_buffer[data_len++] = 0x02; > + } > + tx_buffer[data_len++] = 0x23; > + tx_buffer[data_len++] = 0x00; > + > + err = wdt87xx_i2c_txrxdata(client, tx_buffer, data_len, xfer_buffer, > + buf_size + 2); > + > + if (err < 0) { > + dev_err(&client->dev, "error no: (%d)\n", err); > + return err; > + } > + > + /* check size and copy the return data */ > + xfer_length = (unsigned int) xfer_buffer[1]; > + xfer_length = (xfer_length << 8) | xfer_buffer[0]; > + > + if (buf_size < xfer_length) > + xfer_length = buf_size; > + > + memcpy(buf, &xfer_buffer[2], xfer_length); > + > + mdelay(2); > + > + return 0; > +} > + > +static int wdt87xx_get_string(struct i2c_client *client, char str_idx, > + char *buf, unsigned int buf_size) > +{ > + int err = 0; > + char tx_buffer[8] = { 0x22, 0x00, 0x13, 0x0E, > + 0x00, 0x23, 0x00, 0x00 }; > + char xfer_buffer[80]; > + unsigned int xfer_length; > + > + if (buf_size > 64) > + buf_size = 64; > + > + tx_buffer[4] = str_idx; > + > + err = wdt87xx_i2c_txrxdata(client, tx_buffer, 7, xfer_buffer, > + buf_size + 2); > + > + if (err < 0) { > + dev_err(&client->dev, "error no: (%d)\n", err); > + return err; > + } > + > + if (xfer_buffer[1] != 0x03) { > + dev_err(&client->dev, "error str id: (%d)\n", xfer_buffer[1]); > + return -EBADRQC; > + } > + > + xfer_length = xfer_buffer[0]; > + > + if (buf_size < xfer_length) > + xfer_length = buf_size; > + > + memcpy(buf, &xfer_buffer[2], xfer_length); > + > + mdelay(2); > + > + return 0; > +} > + > + > +static int wdt87xx_send_command(struct i2c_client *client, int cmd, int value) > +{ > + union cmd_data_un cmd_data; > + > + /* set the command packet */ > + cmd_data.defined_data.report_id = VND_REQ_WRITE; > + cmd_data.defined_data.type = VND_SET_COMMAND_DATA; > + cmd_data.defined_data.index = (unsigned short) cmd; > + > + switch (cmd) { > + case VND_CMD_START: > + case VND_CMD_STOP: > + case VND_CMD_RESET: > + /* mode selector */ > + cmd_data.defined_data.length = (char) (value & 0xFF); > + break; > + case VND_CMD_SFLCK: > + put_unaligned_le16(0xC39B, &cmd_data.buffer[3]); > + break; > + case VND_CMD_SFUNL: > + put_unaligned_le16(0x95DA, &cmd_data.buffer[3]); > + break; > + case VND_CMD_ERASE: > + case VND_SET_CHECKSUM_CALC: > + case VND_SET_CHECKSUM_LENGTH: > + put_unaligned_le32(value, &cmd_data.buffer[3]); > + break; > + default: > + cmd_data.defined_data.report_id = 0; > + dev_err(&client->dev, "Invalid command: (%d)", cmd); > + return -EINVAL; > + } > + > + return wdt87xx_set_feature(client, &cmd_data.buffer[0], > + sizeof(cmd_data)); > +} > + > +static int wdt87xx_write_data(struct i2c_client *client, > + const char *data, unsigned int address, int length) > +{ > + unsigned int addr_start, data_len, packet_size; > + int count = 0; > + int err = 0; > + union req_data_un req_data; > + const char *source_data = 0; > + > + source_data = data; > + data_len = length; > + addr_start = address; > + > + /* address and length should be 4 bytes alignment */ > + if ((addr_start & 0x3) != 0 || (data_len & 0x3) != 0) { > + dev_err(&client->dev, "addr & len must be aligned %x, %x\n", > + addr_start, data_len); > + return -EFAULT; > + } > + > + packet_size = PACKET_SIZE; > + > + req_data.defined_data.report_id = VND_REQ_WRITE; > + req_data.defined_data.type = VND_SET_DATA; > + > + while (data_len) { > + if (data_len < PACKET_SIZE) > + packet_size = data_len; > + > + req_data.defined_data.index = packet_size; > + req_data.defined_data.length = addr_start; > + > + memcpy(req_data.defined_data.data, source_data, packet_size); > + > + err = wdt87xx_set_feature(client, req_data.buffer, 64); > + > + if (err) > + break; > + > + data_len = data_len - packet_size; > + source_data = source_data + packet_size; > + addr_start = addr_start + packet_size; > + > + count++; > + > + mdelay(4); > + > + if ((count % 64) == 0) { > + count = 0; > + dev_dbg(&client->dev, "#"); > + } > + } > + > + dev_dbg(&client->dev, "#\n"); > + > + return err; > +} > + > +static unsigned short misr(unsigned short currentValue, > + unsigned char newValue) > +{ > + unsigned int a, b; > + unsigned int bit0; > + unsigned int y; > + > + a = currentValue; > + b = newValue; > + bit0 = a^(b&1); > + bit0 ^= a>>1; > + bit0 ^= a>>2; > + bit0 ^= a>>4; > + bit0 ^= a>>5; > + bit0 ^= a>>7; > + bit0 ^= a>>11; > + bit0 ^= a>>15; > + y = (a<<1)^b; > + y = (y&~1) | (bit0&1); > + > + return (unsigned short) y; > +} > + > +static int wdt87xx_get_checksum(struct i2c_client *client, > + unsigned int *checksum, unsigned int address, int length) > +{ > + int err = 0; > + int time_delay = 0; > + union req_data_un req_data; > + union cmd_data_un cmd_data; > + > + err = wdt87xx_send_command(client, VND_SET_CHECKSUM_LENGTH, length); > + if (err) { > + dev_err(&client->dev, "set checksum length fail (%d)\n", err); > + return err; > + } > + > + err = wdt87xx_send_command(client, VND_SET_CHECKSUM_CALC, address); > + if (err) { > + dev_err(&client->dev, "calc checksum fail (%d)\n", err); > + return err; > + } > + > + time_delay = (length + 1023) / 1024; > + /* to wait the operation compeletion */ > + msleep(time_delay * 10); > + > + cmd_data.defined_data.report_id = VND_REQ_READ; > + cmd_data.defined_data.type = VND_GET_CHECKSUM; > + cmd_data.defined_data.index = 0; > + cmd_data.defined_data.length = 0; > + > + err = wdt87xx_set_feature(client, cmd_data.buffer, 8); > + if (err) { > + dev_err(&client->dev, "checksum set read fail (%d)\n", err); > + return err; > + } > + > + memset(req_data.buffer, 0, 64); > + req_data.defined_data.report_id = VND_READ_DATA; > + err = wdt87xx_get_feature(client, req_data.buffer, 64); > + if (err) { > + dev_err(&client->dev, "read checksum fail (%d)\n", err); > + return err; > + } > + > + *checksum = (req_data.buffer[9] << 8) | (req_data.buffer[8]); > + > + return err; > +} > + > +static unsigned short fw_checksum(const unsigned char *data, > + unsigned int length) > +{ > + unsigned int i; > + unsigned short checksum = 0; > + > + checksum = 0x0000; > + > + for (i = 0; i < length; i++) > + checksum = misr(checksum, data[i]); > + > + return checksum; > +} > + > +static int wdt87xx_write_firmware(struct i2c_client *client, > + struct chunk_info_ex_st *chunk_info_ex, int type) > +{ > + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); > + int err = 0; > + int err1 = 0; > + int size; > + int start_addr = 0; > + int page_size; > + int retry_count = 0; > + int is_equal = 0; > + int max_retries; > + unsigned int calc_checksum = 0; > + unsigned int read_checksum = 0; > + const char *data; > + > + dev_info(&client->dev, "start 4k page program\n"); > + > + err = wdt87xx_send_command(client, VND_CMD_STOP, MODE_STOP); > + if (err) { > + dev_err(&client->dev, "command stop fail (%d)\n", err); > + return err; > + } > + > + err = wdt87xx_send_command(client, VND_CMD_SFUNL, 0); > + if (err) { > + dev_err(&client->dev, "command sfunl fail (%d)\n", err); > + goto write_fail; > + } > + > + mdelay(10); > + > + start_addr = chunk_info_ex->chunk_info.target_start_addr; > + size = chunk_info_ex->chunk_info.length; > + data = chunk_info_ex->data; > + > + max_retries = dev_wdt87xx->max_retries; > + > + dev_info(&client->dev, "%x, %x, %d\n", start_addr, size, max_retries); > + > + while (size && !err) { > + is_equal = 0; > + if (size > PG_SIZE) { > + page_size = PG_SIZE; > + size = size - PG_SIZE; > + } else { > + page_size = size; > + size = 0; > + } > + > + for (retry_count = 0; retry_count < max_retries && !is_equal; > + retry_count++) { > + err = wdt87xx_send_command(client, VND_CMD_ERASE, > + start_addr); > + if (err) { > + dev_err(&client->dev, "erase fail (%d)\n", > + err); > + break; > + } > + > + msleep(50); > + > + err = wdt87xx_write_data(client, data, start_addr, > + page_size); > + if (err) { > + dev_err(&client->dev, "write data fail (%d)\n", > + err); > + break; > + } > + > + read_checksum = 0; > + err = wdt87xx_get_checksum(client, &read_checksum, > + start_addr, page_size); > + if (err) > + break; > + > + calc_checksum = fw_checksum(data, page_size); > + > + if (read_checksum == calc_checksum) > + is_equal = 1; > + else { > + dev_err(&client->dev, "checksum fail: (%d)", > + retry_count); > + dev_err(&client->dev, ",(%d), (%d)\n", > + read_checksum, calc_checksum); > + } > + } > + > + if (retry_count == MAX_RETRIES) { > + dev_err(&client->dev, "write page fail\n"); > + err = -EIO; > + } > + > + start_addr = start_addr + page_size; > + data = data + page_size; > + dev_info(&client->dev, "%x, %x\n", start_addr, size); > + } > +write_fail: > + err1 = wdt87xx_send_command(client, VND_CMD_SFLCK, 0); > + if (err1) > + dev_err(&client->dev, "command sflck fail (%d)\n", err1); > + > + mdelay(10); > + > + err1 = wdt87xx_send_command(client, VND_CMD_START, 0); > + if (err1) > + dev_err(&client->dev, "command start fail (%d)\n", err1); > + > + dev_info(&client->dev, "stop 4k page program : "); > + > + if (err || err1) > + dev_info(&client->dev, "fail\n"); > + else > + dev_info(&client->dev, "pass\n"); > + > + if (err1) > + return err1; > + > + return err; > +} > + > +static int wdt87xx_sw_reset(struct i2c_client *client) > +{ > + int err = 0; > + > + dev_info(&client->dev, "reset device now\n"); > + > + err = wdt87xx_send_command(client, VND_CMD_RESET, 0); > + if (err) { > + dev_err(&client->dev, "command reset fail (%d)\n", err); > + return err; > + } > + > + msleep(100); > + > + return 0; > +} > + > +static int wdt87xx_load_chunk(struct i2c_client *client, > + const struct firmware *fw, > + struct format_chunk_st *format_chunk, unsigned int ck_id) > +{ > + int err = 0; > + struct chunk_info_ex_st chunk_info_ex; > + > + err = get_chunk_info(fw, ck_id, &chunk_info_ex, format_chunk); > + if (err) { > + dev_err(&client->dev, "can not get the fw !\n"); > + goto failed; > + } > + > + /* Check for incorrect bin file */ > + err = wdt87xx_check_firmware(&chunk_info_ex, ck_id); > + if (err) { > + dev_err(&client->dev, "invalid chunk : (%d)\n", ck_id); > + goto failed; > + } > + > + err = wdt87xx_write_firmware(client, &chunk_info_ex, ck_id); > + if (err) > + dev_err(&client->dev, "write firmware failed : (%d)\n", > + ck_id); > + > +failed: > + return err; > +} > + > +static int wdt87xx_load_fw(struct device *dev, const char *fn, int type) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + const struct firmware *fw = 0; > + int err = 0; > + struct format_chunk_st format_chunk; > + > + err = request_firmware(&fw, fn, dev); > + if (err) { > + dev_err(&client->dev, "unable to open firmware %s\n", fn); > + return err; > + } > + > + disable_irq(client->irq); > + > + err = process_fw_data(client, fw, &format_chunk); > + if (err) { > + dev_err(&client->dev, "bad fw file !\n"); > + goto release_firmware; > + } > + > + if (type & WDT87XX_FW) { > + err = wdt87xx_load_chunk(client, fw, &format_chunk, > + CHUNK_ID_FRWR); > + if (err) { > + dev_err(&client->dev, "load fw chunk failed !\n"); > + goto release_firmware; > + } > + } > + > + if (type & WDT87XX_CFG) { > + err = wdt87xx_load_chunk(client, fw, &format_chunk, > + CHUNK_ID_CNFG); > + if (err) { > + dev_err(&client->dev, "load cfg chunk failed !\n"); > + goto release_firmware; > + } > + } > + > + err = wdt87xx_sw_reset(client); > + > + if (err) > + dev_err(&client->dev, "software reset failed !\n"); > + > +release_firmware: > + enable_irq(client->irq); > + > + mdelay(10); > + release_firmware(fw); > + return err; > +} > + > +static ssize_t wdt87xx_update_fw(struct device *dev, > + struct device_attribute *attr, const char *buf, size_t count) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); > + int err = 0; > + int option = 0; > + > + if (count > 0) > + option = buf[0] - '0'; "Normal" sysfs attributes operate on strings (unlike binary attribues). Please use appropriate kstrtoXX()to convert string to number. I also wonder if we should create 2 attributes, one to load config and another to load firmware, instead of doing this "combo" attribute. > + > + dev_info(dev, "update option (%d)\n", option); > + if (option < 1 || option > 3) { > + dev_err(&client->dev, "option is not supported\n"); > + return -1; > + } > + > + err = mutex_lock_interruptible(&dev_wdt87xx->sysfs_mutex); > + if (err) > + return err; > + > + err = wdt87xx_load_fw(dev, WDT87XX_FW_NAME, option); > + if (err) { > + dev_err(&client->dev, "the firmware update failed(%d)\n", > + err); > + count = err; > + } > + > + mutex_unlock(&dev_wdt87xx->sysfs_mutex); > + > + return count; > +} > + > +static ssize_t wdt87xx_max_retries(struct device *dev, > + struct device_attribute *attr, const char *buf, size_t count) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); > + > + int option = 0; > + > + if (count > 0) > + option = buf[0] - '0'; > + > + dev_wdt87xx->max_retries = option; Why would user decide to change this value and how they will select it? > + dev_info(dev, "max retries (%d)\n", option); > + > + return count; > +} > + > +static ssize_t wdt87xx_show_info(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); > + struct sys_param_st *sys_param = &dev_wdt87xx->sys_param; > + > + wdt87xx_get_sysparam(client, dev_wdt87xx); > + > + return scnprintf(buf, PAGE_SIZE, "%x,%x,%4x,%4x\n", sys_param->fw_id, > + sys_param->plat_id, sys_param->xmls_id1, > + sys_param->xmls_id2); sysfs has "one value per attribute" rule, please split this. > +} > + > +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, wdt87xx_update_fw); > +static DEVICE_ATTR(max_retries, S_IWUSR, NULL, wdt87xx_max_retries); > +static DEVICE_ATTR(show_info, S_IRUGO, wdt87xx_show_info, NULL); > + > +static struct attribute *wdt87xx_attrs[] = { > + &dev_attr_update_fw.attr, > + &dev_attr_max_retries.attr, > + &dev_attr_show_info.attr, > + NULL You just need one tab to indent here. > +}; > + > +static const struct attribute_group wdt87xx_attr_group = { > + .attrs = wdt87xx_attrs, Here as well. > +}; > + > +static int wdt87xx_i2c_txrxdata(struct i2c_client *client, char *txdata, > + int txlen, char *rxdata, int rxlen) > +{ > + int err = 0; No need to initialize err here. > + > + struct i2c_msg msgs[] = { > + { > + .addr = client->addr, > + .flags = 0, > + .len = txlen, > + .buf = txdata, > + }, > + { > + .addr = client->addr, > + .flags = I2C_M_RD, > + .len = rxlen, > + .buf = rxdata, > + }, > + }; > + > + err = i2c_transfer(client->adapter, msgs, 2); > + > + if (err < 0) > + dev_err(&client->dev, "%s: i2c read error (%d)\n", > + __func__, err); You also want to handle case err != ARRAY_SIZE(msgs) and convert it to -EIO; > + > + return err; > +} > + > +static int wdt87xx_i2c_rxdata(struct i2c_client *client, char *rxdata, > + int length) > +{ > + int err = 0; > + > + struct i2c_msg msgs[] = { > + { > + .addr = client->addr, > + .flags = I2C_M_RD, > + .len = length, > + .buf = rxdata, > + }, > + }; > + > + err = i2c_transfer(client->adapter, msgs, 1); Why not simply i2c_master_recv()? > + > + if (err < 0) > + dev_err(&client->dev, "%s: i2c read error (%d)\n", > + __func__, err); > + > + return err; > +} > + > +static int wdt87xx_i2c_txdata(struct i2c_client *client, char *txdata, > + int length) > +{ > + int err = 0; > + > + struct i2c_msg msg[] = { > + { > + .addr = client->addr, > + .flags = 0, > + .len = length, > + .buf = txdata, > + }, > + }; > + > + err = i2c_transfer(client->adapter, msg, 1); And i2c_master_send() here. > + if (err < 0) > + dev_err(&client->dev, "%s: i2c write error (%d)\n", > + __func__, err); > + > + return err; > +} > + > +static void wdt87xx_ts_handle_irq(struct wdt87xx_ts_data *data) > +{ > + struct wdt87xx_ts_data *dev_wdt87xx = data; > + int err = 0; Please only initialize when actually needed. > + int i, points; > + struct i2c_client *client = dev_wdt87xx->client; > + struct wdt_touch_events_st *ptr_touch_event = 0; > + u8 raw_buf[64] = {0}; > + > + static u8 points_last_flag[WDT_MAX_POINT<<1] = {0}; No statics please? What if you have a system with 2 such devices? Keep state in device-local data (i.e. wdt87xx_ts_data). > + > + err = wdt87xx_i2c_rxdata(client, raw_buf, WDT_RAW_BUF_COUNT); > + > + if (err < 0) { > + dev_err(&client->dev, "read raw data fail (%d)\n", err); > + return; > + } > + > + /* touch finger count */ > + points = raw_buf[53]; > + > + dev_dbg(&client->dev, "point: (%d)\n", points); > + > + if (points == 0) { > + for (i = 0; i < WDT_MAX_POINT; i++) { > + /* force to send event of tip off */ > + if (points_last_flag[i] != 0) { > + dev_dbg(&client->dev, "tip off (%d)\n", i); > + input_mt_slot(dev_wdt87xx->input_dev, i); > + input_mt_report_slot_state( > + dev_wdt87xx->input_dev, > + MT_TOOL_FINGER, false); > + } > + } > + > + memset(points_last_flag, 0, sizeof(points_last_flag)); > + > + input_sync(dev_wdt87xx->input_dev); > + return; I do not think you need to handle this explicitly. > + } > + > + ptr_touch_event = (struct wdt_touch_events_st *) raw_buf; > + > + dev_dbg(&client->dev, "+++++++++\n"); > + > + for (i = 0; i < WDT_MAX_POINT; i++) { > + int point_id = (ptr_touch_event->touch_event[i].id >> 3) - 1; > + > + if (point_id < 0) > + continue; > + > + /* tip off */ > + if (((ptr_touch_event->touch_event[i].id & 0x1) == 0) && > + (points_last_flag[point_id] != 0)) { > + dev_dbg(&client->dev, "tip on (%d)\n", point_id); > + input_mt_slot(dev_wdt87xx->input_dev, point_id); > + input_mt_report_slot_state(dev_wdt87xx->input_dev, > + MT_TOOL_FINGER, false); > + } else /* tip on */ > + if (ptr_touch_event->touch_event[i].id & 0x1) { > + unsigned int point_x, point_y; > + > + /* incorrect coordinate */ > + if (ptr_touch_event->touch_event[i].x > 0x7FFF || > + ptr_touch_event->touch_event[i].y > 0x7FFF) > + continue; > + > + point_x = ptr_touch_event->touch_event[i].x; > + point_y = ptr_touch_event->touch_event[i].y; > + > + dev_dbg(&client->dev, "tip on (%d), x(%d), y(%d)\n", > + i, point_x, point_y); > + > + input_mt_slot(dev_wdt87xx->input_dev, point_id); > + input_mt_report_slot_state(dev_wdt87xx->input_dev, > + MT_TOOL_FINGER, true); > + input_report_abs(dev_wdt87xx->input_dev, > + ABS_MT_TOUCH_MAJOR, 1); > + input_report_abs(dev_wdt87xx->input_dev, > + ABS_MT_POSITION_X, point_x); > + input_report_abs(dev_wdt87xx->input_dev, > + ABS_MT_POSITION_Y, point_y); > + } > + points_last_flag[point_id] = > + (ptr_touch_event->touch_event[i].id & 0x1); > + } Just report slots that are active and instruct input code to drop unused slots for you (by using INPUT_MT_DROP_UINUSED with input_mt_init_slots). > + > + input_sync(dev_wdt87xx->input_dev); > +} > + > +static irqreturn_t wdt87xx_ts_interrupt(int irq, void *dev_id) > +{ > + struct wdt87xx_ts_data *dev_wdt87xx = > + (struct wdt87xx_ts_data *) dev_id; > + > + wdt87xx_ts_handle_irq(dev_wdt87xx); Why do you need this extra wrapper? > + > + return IRQ_HANDLED; > +} > + > +static int wdt87xx_ts_request_irq(struct i2c_client *client) > +{ > + int err = 0; > + struct wdt87xx_ts_data *dev_wdt87xx; > + > + dev_wdt87xx = (struct wdt87xx_ts_data *) i2c_get_clientdata(client); No need to cast. > + > +/* > + * once using the ACPI, we shall get the irq number from the client > + * if it is not in the ACPI, we shall get a irq number from the gpio > + */ > +#ifndef CONFIG_ACPI > + client->irq = 0; > + > + /* request a selected gpio */ > + err = gpio_request(DINT_GPIO_NUM, "GPIO DINT"); > + if (err < 0) { > + dev_err(&client->dev, "%s: request gpio fail (%d)\n", > + __func__, err); > + return -EINVAL; > + } > + > + /* request a irq no */ > + client->irq = gpio_to_irq(DINT_GPIO_NUM); > + if (client->irq < 0) { > + dev_err(&client->dev, "%s: request irq fail (%d)\n", > + __func__, client->irq); > + return -EINVAL; > + } > + > + gpio_direction_input(DINT_GPIO_NUM); > + gpio_set_value(DINT_GPIO_NUM, 1); This should be done by board code, not by the driver, as GPIO number will not be the same on all boards that use ACPI. Yiou may have to carry this change locally in your tree for the existing board. > +#endif > + > + irq_set_irq_type(client->irq, IRQ_TYPE_EDGE_FALLING); This also should be done by board/OF code. > + > + err = request_threaded_irq(client->irq, NULL, wdt87xx_ts_interrupt, > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, I would prefer the driver rely on board/OF code to set up the trigger and only use IRQF_ONESHOT here. > + client->name, dev_wdt87xx); > + > + if (err < 0) { > + dev_err(&client->dev, "%s: request threaded irq fail (%d)\n", > + __func__, err); > + return err; > + } > + > + disable_irq_nosync(client->irq); > + > + return 0; > +} > + > +static int wdt87xx_ts_create_input_device(struct i2c_client *client) > +{ > + int err = 0; > + struct wdt87xx_ts_data *dev_wdt87xx; > + struct input_dev *input_dev; > + > + dev_wdt87xx = (struct wdt87xx_ts_data *) i2c_get_clientdata(client); > + > + input_dev = input_allocate_device(); > + if (!input_dev) { > + dev_err(&client->dev, "%s: failed to allocate input device\n", > + __func__); > + return -ENOMEM; > + } > + > + dev_wdt87xx->input_dev = input_dev; > + > + input_dev->name = "WDT87xx Touchscreen"; > + input_dev->id.bustype = BUS_I2C; > + > + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); > + > + /* for single touch */ > + set_bit(ABS_X, input_dev->absbit); > + set_bit(ABS_Y, input_dev->absbit); > + input_set_abs_params(input_dev, ABS_X, 0, SCREEN_LOGICAL_MAX_X, 0, 0); > + input_set_abs_params(input_dev, ABS_Y, 0, SCREEN_LOGICAL_MAX_Y, 0, 0); > + input_abs_set_res(input_dev, ABS_X, WDT_UNITS_PER_MM); > + input_abs_set_res(input_dev, ABS_Y, WDT_UNITS_PER_MM); > + > + input_mt_init_slots(input_dev, WDT_MAX_POINT, INPUT_MT_DIRECT); > + > + set_bit(ABS_MT_TOUCH_MAJOR, input_dev->absbit); > + set_bit(ABS_MT_POSITION_X, input_dev->absbit); > + set_bit(ABS_MT_POSITION_Y, input_dev->absbit); > + set_bit(ABS_MT_WIDTH_MAJOR, input_dev->absbit); > + > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, > + SCREEN_LOGICAL_MAX_X, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, > + SCREEN_LOGICAL_MAX_Y, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 0xFF, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 200, 0, 0); > + input_abs_set_res(input_dev, ABS_MT_POSITION_X, WDT_UNITS_PER_MM); > + input_abs_set_res(input_dev, ABS_MT_POSITION_Y, WDT_UNITS_PER_MM); > + > + set_bit(ABS_PRESSURE, input_dev->absbit); > + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xFF, 0, 0); > + > + input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0, > + WDT_MAX_POINT, 0, 0); > + > + set_bit(EV_ABS, input_dev->evbit); > + set_bit(EV_SYN, input_dev->evbit); > + > + err = input_register_device(input_dev); > + if (err) { > + dev_err(&client->dev, "register input device fail (%d)\n", > + err); You are leaking input device here. > + return err; > + } > + > + return 0; > +} > + > +static int wdt87xx_ts_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct wdt87xx_ts_data *dev_wdt87xx; > + int err = 0; > + > + dev_dbg(&client->dev, "wdt87xx : adapter=(%d), client irq:(%d)\n", > + client->adapter->nr, client->irq); > + > + /* check if the I2C function is ok in this adaptor */ > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > + err = -ENODEV; > + goto exit_check_functionality_fail; Just do return -ENODEV; > + } > + > + dev_dbg(&client->dev, "kzalloc\n"); > + dev_wdt87xx = (struct wdt87xx_ts_data *) No nedd to cast. > + kzalloc(sizeof(struct wdt87xx_ts_data), GFP_KERNEL); Consider using devm* API to simplify error handling. > + if (!dev_wdt87xx) { > + err = -ENOMEM; > + goto exit_alloc_data_fail; > + } > + > + dev_dbg(&client->dev, "i2c_set_clientdata\n"); > + > + dev_wdt87xx->client = client; > + mutex_init(&dev_wdt87xx->sysfs_mutex); > + i2c_set_clientdata(client, dev_wdt87xx); > + dev_wdt87xx->max_retries = MAX_RETRIES; > + > + dev_dbg(&client->dev, "wdt87xx_ts_request_irq\n"); > + err = wdt87xx_ts_request_irq(client); > + if (err < 0) { > + dev_err(&client->dev, "request irq fail (%d)\n", err); > + goto exit_gpio_request_fail; > + } > + > + dev_dbg(&client->dev, "wdt87xx_ts_create_input_device\n"); > + err = wdt87xx_ts_create_input_device(client); > + if (err < 0) { > + dev_err(&client->dev, "create input device fail (%d)\n", err); > + goto exit_input_register_device_fail; > + } > + > + dev_dbg(&client->dev, "sysfs_create_group\n"); > + err = sysfs_create_group(&client->dev.kobj, &wdt87xx_attr_group); > + if (err) { > + dev_err(&client->dev, "create sysfs fail (%d)\n", err); > + goto err_free_object; > + } > + > + enable_irq(client->irq); > + > + dev_dbg(&client->dev, "%s leave\n", __func__); > + > + return 0; > + > +err_free_object: > +exit_input_register_device_fail: > + input_free_device(dev_wdt87xx->input_dev); > + > + > +exit_gpio_request_fail: > +#ifndef CONFIG_ACPI > + gpio_free(DINT_GPIO_NUM); > +#endif > + if (client->irq) > + free_irq(client->irq, dev_wdt87xx); > + > + i2c_set_clientdata(client, NULL); > + > + kfree(dev_wdt87xx); > +exit_alloc_data_fail: > +exit_check_functionality_fail: > + > + return err; > +} > + > +static int wdt87xx_ts_remove(struct i2c_client *client) > +{ > + struct wdt87xx_ts_data *dev_wdt87xx = > + (struct wdt87xx_ts_data *) i2c_get_clientdata(client); > + > + dev_dbg(&client->dev, "==%s==\n", __func__); > + > + sysfs_remove_group(&client->dev.kobj, &wdt87xx_attr_group); > + > + input_unregister_device(dev_wdt87xx->input_dev); > + input_free_device(dev_wdt87xx->input_dev); This is double-free. Once input device is registered you should only unregister. > + > +#ifndef CONFIG_ACPI > + gpio_free(DINT_GPIO_NUM); > +#endif > + > + if (client->irq) > + free_irq(client->irq, dev_wdt87xx); This is racy. IRQ may fire but input device is already gone. > + > + i2c_set_clientdata(client, NULL); No need, driver core will do this for you. > + kfree(dev_wdt87xx); > + > + return 0; > +} > + > +static int __maybe_unused wdt87xx_suspend(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + int err = 0; > + > + dev_dbg(&client->dev, "enter %s\n", __func__); > + > + disable_irq(client->irq); > + > + err = wdt87xx_send_command(client, VND_CMD_STOP, MODE_IDLE); > + if (err) > + dev_err(&client->dev, "%s: command stop fail (%d)\n", > + __func__, err); > + > + return err; > +} > + > +static int __maybe_unused wdt87xx_resume(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + int err = 0; > + > + /* once the chip is reset before resume, */ > + /* we need some time to wait it is stable */ > + mdelay(100); > + > + err = wdt87xx_send_command(client, VND_CMD_START, 0); > + if (err) > + dev_err(&client->dev, "%s: command start fail (%d)\n", > + __func__, err); > + > + enable_irq(client->irq); > + > + dev_dbg(&client->dev, "leave %s\n", __func__); > + > + return 0; > +} > + > +static SIMPLE_DEV_PM_OPS(wdt87xx_pm_ops, wdt87xx_suspend, wdt87xx_resume); > + > +static const struct i2c_device_id wdt87xx_dev_id[] = { > + { WDT87XX_NAME, 0 }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(i2c, wdt87xx_dev_id); > + > +#ifdef CONFIG_ACPI > +static const struct acpi_device_id wdt87xx_acpi_id[] = { > + { "WDHT0001", 0 }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(acpi, wdt87xx_acpi_id); > +#endif > + > +static struct i2c_driver wdt87xx_driver = { > + .probe = wdt87xx_ts_probe, > + .remove = wdt87xx_ts_remove, > + .id_table = wdt87xx_dev_id, > + .driver = { > + .name = WDT87XX_NAME, > + .owner = THIS_MODULE, > + .pm = &wdt87xx_pm_ops, > +#ifdef CONFIG_ACPI No need for this ifdef, ACPI_PTR is stubbed properly. > + .acpi_match_table = ACPI_PTR(wdt87xx_acpi_id), > +#endif > + }, > +}; > + > +module_i2c_driver(wdt87xx_driver); > + > +MODULE_AUTHOR("HN Chen <hn.chen@weidahitech.com>"); > +MODULE_DESCRIPTION("WeidaHiTech WDT87XX Touchscreen driver"); > +MODULE_VERSION(WDT87XX_DRV_VER); > +MODULE_LICENSE("GPL"); > + > -- > 1.9.1 > Thanks.
Hi, Dmitry, Just send out the patch v3 and most of modifications are following your suggestions. > I also wonder if we should create 2 attributes, one to load config and another to load firmware, instead of doing this "combo" attribute. About the part of combo attribute, here is my description. Since the image format is including fw & config, we can update the two parts in one time. We update the fw & config in the same time for most situation. Under this kind of condition, still need to have 2 attributes ? Thanks in advance. Hn.chen -----Original Message----- From: Dmitry Torokhov [mailto:dmitry.torokhov@gmail.com] Sent: Thursday, May 07, 2015 1:36 PM To: Hn Chen Cc: linux-input@vger.kernel.org; linux-kernel@vger.kernel.org Subject: Re: [PATCH v2] Fix the license mismatch and add the resolution setting Hi Hn, On Tue, Apr 28, 2015 at 06:35:58PM +0800, HungNien Chen wrote: > Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Thank you for your submission, please find my comments below. > --- > drivers/input/touchscreen/Kconfig | 12 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/wdt87xx_i2c.c | 1501 > +++++++++++++++++++++++++++++++ > 3 files changed, 1514 insertions(+) > create mode 100644 drivers/input/touchscreen/wdt87xx_i2c.c > > diff --git a/drivers/input/touchscreen/Kconfig > b/drivers/input/touchscreen/Kconfig > index 80f6386..0c1a6cc 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -658,6 +658,18 @@ config TOUCHSCREEN_PIXCIR > To compile this driver as a module, choose M here: the > module will be called pixcir_i2c_ts. > > +config TOUCHSCREEN_WDT87XX_I2C > + tristate "Weida HiTech I2C touchscreen" > + depends on I2C > + help > + Say Y here if you have an Weida WDT87XX I2C touchscreen > + connected to your system. > + > + If unsure, say N. > + > + To compile this driver as a module, choose M here: the > + module will be called wdt87xx_i2c. > + > config TOUCHSCREEN_WM831X > tristate "Support for WM831x touchscreen controllers" > depends on MFD_WM831X > diff --git a/drivers/input/touchscreen/Makefile > b/drivers/input/touchscreen/Makefile > index 44deea7..fa3d33b 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -72,6 +72,7 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o > obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o > obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o > obj-$(CONFIG_TOUCHSCREEN_WACOM_I2C) += wacom_i2c.o > +obj-$(CONFIG_TOUCHSCREEN_WDT87XX_I2C) += wdt87xx_i2c.o > obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o > obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o > wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o > diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c > b/drivers/input/touchscreen/wdt87xx_i2c.c > new file mode 100644 > index 0000000..c79439c > --- /dev/null > +++ b/drivers/input/touchscreen/wdt87xx_i2c.c > @@ -0,0 +1,1501 @@ > +/* > + * drivers/input/touchscreen/wdt87xx_i2c.c No need to mention file name in comments. > + * > + * Weida HiTech WDT87xx TouchScreen I2C driver > + * > + * Copyright (c) 2014 Weida HiTech Ltd. > + * HN Chen <hn.chen@weidahitech.com> > + * > + * This software is licensed under the terms of the GNU General > + Public > + * License, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * Note: this is a I2C device driver and report touch events througt the > + * input device > + */ > + > + > +#include <linux/version.h> > +#include <linux/i2c.h> > +#include <linux/input.h> > +#include <linux/interrupt.h> > +#include <linux/delay.h> > +#include <linux/gpio.h> > +#include <linux/irq.h> > +#include <linux/ioc4.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/proc_fs.h> > +#include <linux/slab.h> > +#include <linux/firmware.h> > +#include <linux/gpio.h> > +#include <linux/input/mt.h> > +#include <asm/unaligned.h> > + > +#ifdef CONFIG_ACPI No need to guard, just include. > +#include <linux/acpi.h> > +#endif > + > +#define WDT87XX_NAME "wdt87xx_i2c" > +#define WDT87XX_DRV_VER "0.9.1" > +#define WDT87XX_FW_NAME "wdt87xx_fw.bin" > + > +#define WDT87XX_FW 1 > +#define WDT87XX_CFG 2 > + > +#define MODE_ACTIVE 0x01 > +#define MODE_READY 0x02 > +#define MODE_IDLE 0x03 > +#define MODE_SLEEP 0x04 > +#define MODE_STOP 0xFF > + > +#define WDT_MAX_POINT 10 > +#define WDT_RAW_BUF_COUNT 54 > + > +#define PG_SIZE 0x1000 > +#define MAX_RETRIES 3 > + > +#define WDT_UNITS_PER_MM 60 > + > +/* the definition for one touch point */ struct > +wdt_touch_point_event_st { Please do not put 2 spaces between "struct" and it's name and also please do not add "_st" suffixes to your structures. > + unsigned char id; > + unsigned short x; > + unsigned short y; > +} __packed; Hmm, this is on-wire structure, right? I guess x and y must be little-endian on wire. You need to convert them to CPU endianness before using, or the driver will break on big-endian devices. Also, x and y are likely not naturally aligned so you probably want to use get_unaligned_le16() when reading them or or may encounter issues on some boards. Because of that I'd rather you did not define wdt_touch_point_event_st structure but defined offsets for ID, X and Y and use them to fetch data from character buffer where you read the data from the device. > + > + > +/* the definition for a packet */ > +struct wdt_touch_events_st { > + unsigned char report_id; > + struct wdt_touch_point_event_st touch_event[WDT_MAX_POINT]; > + unsigned short scan_time; > + unsigned char num_touches; > +} __packed; > + > +/* the definition for the chip parameters */ > +struct sys_param_st { > + unsigned short fw_id; > + unsigned short plat_id; > + unsigned short xmls_id1; > + unsigned short xmls_id2; > + unsigned short phy_x; > + unsigned short phy_y; > +} __packed; > + > +/* the definition for this driver needed */ struct wdt87xx_ts_data { > + struct i2c_client *client; > + struct input_dev *input_dev; > +/* to protect the operation in sysfs */ > + struct mutex sysfs_mutex; > + unsigned int max_retries; > + struct sys_param_st sys_param; > +}; > + > +/* communacation commands */ > +#define PACKET_SIZE 56 > +#define VND_REQ_READ 0x06 > +#define VND_READ_DATA 0x07 > +#define VND_REQ_WRITE 0x08 > + > +#define VND_CMD_START 0x00 > +#define VND_CMD_STOP 0x01 > +#define VND_CMD_RESET 0x09 > + > +#define VND_CMD_ERASE 0x1A > + > +#define VND_GET_CHECKSUM 0x66 > + > +#define VND_SET_DATA 0x83 > +#define VND_SET_COMMAND_DATA 0x84 > +#define VND_SET_CHECKSUM_CALC 0x86 > +#define VND_SET_CHECKSUM_LENGTH 0x87 > + > +#define VND_CMD_SFLCK 0xFC > +#define VND_CMD_SFUNL 0xFD > + > +#define STRIDX_PLATFORM_ID 0x80 > +#define STRIDX_PARAMETERS 0x81 > + > + > +/* the definition of command structure */ union cmd_data_un { > + struct { > + char report_id; > + char type; > + unsigned short index; > + unsigned int length; > + } defined_data; > + char buffer[8]; > +}; > + > +/* the definition of packet structure */ union req_data_un { > + struct { > + char report_id; > + char type; > + unsigned short index; > + unsigned int length; > + char data[PACKET_SIZE]; > + } defined_data; > + char buffer[64]; > +}; > + > +/* the definition of firmware data structure */ struct chunk_info_st > +{ > + unsigned int target_start_addr; > + unsigned int length; > + unsigned int source_start_addr; > + unsigned int version_number; > + unsigned int attribute; > + unsigned int temp; > +}; > + > +struct chunk_data_st { > + unsigned int ck_id; > + unsigned int ck_size; > + struct chunk_info_st chunk_info; > + char *chunk_data; > +}; > + > +struct format_chunk_st { > + unsigned int ck_id; > + unsigned int ck_size; > + unsigned int number_chunk; > + unsigned int enable_flag; > + unsigned int checksum; > + unsigned int temp1; > + unsigned int temp2; > +}; > + > +struct chunk_info_ex_st { > + struct chunk_info_st chunk_info; > + char *data; > + unsigned int length; > +}; > + > +/* the definition of firmware chunk tags */ > +#define FOURCC_ID_RIFF 0x46464952 > +#define FOURCC_ID_WHIF 0x46494857 > +#define FOURCC_ID_FRMT 0x544D5246 > +#define FOURCC_ID_FRWR 0x52575246 > +#define FOURCC_ID_CNFG 0x47464E43 > + > +#define CHUNK_ID_FRMT 0x00 > +#define CHUNK_ID_FRWR 0x01 > +#define CHUNK_ID_CNFG 0x02 > + > +/* the definition of gpio & data irq */ > +#ifndef CONFIG_ACPI > +/* > + * for kernel version >= 3.18.0, the gpio number is 338 > + * #define DINT_GPIO_NUM 338 > + */ > +#define DINT_GPIO_NUM 82 > +#endif > + > +/* for the touch report */ > +static int SCREEN_LOGICAL_MAX_X = 0x7FFF; > +static int SCREEN_LOGICAL_MAX_Y = 0x7FFF; > + > +/* output the error message */ > +#define dev_err(__dev, x...) dev_err(__dev, x) > + > +static int wdt87xx_i2c_txrxdata(struct i2c_client *client, char *txdata, > + int txlen, char *rxdata, int rxlen); static int > +wdt87xx_i2c_rxdata(struct i2c_client *client, char *rxdata, > + int length); > +static int wdt87xx_i2c_txdata(struct i2c_client *client, char *txdata, > + int length); > +static int wdt87xx_set_feature(struct i2c_client *client, char *buf, > + unsigned int buf_size); > +static int wdt87xx_get_feature(struct i2c_client *client, char *buf, > + unsigned int buf_size); > +static int wdt87xx_get_string(struct i2c_client *client, char str_idx, > + char *buf, unsigned int buf_size); > + > +static unsigned int get_chunk_fourcc(unsigned int chunk_index) { > + switch (chunk_index) { > + case CHUNK_ID_FRMT: > + return FOURCC_ID_FRMT; > + case CHUNK_ID_FRWR: > + return FOURCC_ID_FRWR; > + case CHUNK_ID_CNFG: > + return FOURCC_ID_CNFG; > + default: > + return 0; > + } > + return 0; > +} > + > +static int get_chunk_info(const struct firmware *fw, unsigned int chunk_index, > + struct chunk_info_ex_st *chunk_info_ex, > + struct format_chunk_st *format_chunk) { > + unsigned int chunk_four_cc; > + const char *data = 0; > + unsigned int data_len = 0; > + unsigned int is_found = 0; > + > + /* check the pointer is null */ > + if (!fw || !chunk_info_ex || !format_chunk) > + return -EINVAL; > + > + chunk_four_cc = get_chunk_fourcc(chunk_index); > + > + if (!chunk_four_cc) > + return -EBADRQC; > + > + data = fw->data; > + data_len = fw->size; > + > + /* check if the chunk is existed */ > + if (format_chunk->enable_flag | chunk_index) { > + unsigned int chunk_start_pos = 12 > + + sizeof(struct format_chunk_st); > + struct chunk_data_st *chunk_data = 0; > + > + while (chunk_start_pos < data_len && !is_found) { > + chunk_data = (struct chunk_data_st *) > + &data[chunk_start_pos]; > + > + /* the chunk is found */ > + if (chunk_data->ck_id == chunk_four_cc) { > + memcpy((void *) &chunk_info_ex->chunk_info, > + (void *) &chunk_data->chunk_info, > + sizeof(struct chunk_info_st)); > + chunk_info_ex->length = > + chunk_data->chunk_info.length; > + chunk_info_ex->data = > + (char *) &data[chunk_start_pos + 8 > + + sizeof(struct chunk_info_st)]; > + > + is_found = 1; > + } else { > + chunk_start_pos = chunk_start_pos > + + chunk_data->ck_size + 8; > + } > + } > + } > + > + if (is_found) > + return 0; > + > + return -ENODATA; > +} > + > +static int wdt87xx_get_sysparam(struct i2c_client *client, > + struct wdt87xx_ts_data *dev_wdt87xx) { > + struct sys_param_st *sys_param = &dev_wdt87xx->sys_param; > + char buffer[72]; > + unsigned int *u32_data; > + int err = 0; > + > + err = wdt87xx_get_string(client, STRIDX_PARAMETERS, buffer, 32); > + if (err) { > + dev_err(&client->dev, "get parameters error (%d)\n", err); > + return err; > + } > + > + memcpy((void *) &dev_wdt87xx->sys_param, buffer, No need to cast pointers to void in C. > + sizeof(struct sys_param_st)); You can't just copy on-wire data into kernel structures unless you are treating it as stream of bytes and you do not. Integers wider than 8 bytes need to be converted to CPU-endianness. > + > + err = wdt87xx_get_string(client, STRIDX_PLATFORM_ID, buffer, 8); > + if (err) { > + dev_err(&client->dev, "get platform id error (%d)\n", err); > + return err; > + } > + > + dev_wdt87xx->sys_param.plat_id = buffer[1]; > + > + buffer[0] = 0xf2; > + err = wdt87xx_get_feature(client, buffer, 16); > + if (err) { > + dev_err(&client->dev, "get firmware id error (%d)\n", err); > + return err; > + } > + > + if (buffer[0] != 0xf2) { > + dev_err(&client->dev, "fw id packet error !\n"); > + return -EBADRQC; > + } > + > + u32_data = (unsigned int *) &buffer[1]; > + sys_param->fw_id = ((*u32_data) & 0xFFFF); sys_param->fw_id = get_unaligned_le16(&buffer[3]); ? > + > + dev_err(&client->dev, "fw_id: 0x%x, plat_id: 0x%x\n", > + sys_param->fw_id, sys_param->plat_id); > + dev_err(&client->dev, "xml_id1: %4x, xml_id2: %4x\n", > + sys_param->xmls_id1, sys_param->xmls_id2); > + > + return 0; > +} > + > +int process_fw_data(struct i2c_client *client, const struct firmware *fw, > + struct format_chunk_st *format_chunk) { > + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); > + unsigned int length = 0; > + struct chunk_info_ex_st chunk_info_ex; > + int err = 0; > + unsigned int *u32_data; > + char fw_id; > + char chip_id; > + > + /* check the pointer is null */ > + if (!fw || !format_chunk) > + return -EINVAL; > + > + u32_data = (unsigned int *) fw->data; > + length = fw->size; > + > + if (u32_data[0] != FOURCC_ID_RIFF || u32_data[2] != FOURCC_ID_WHIF) { > + dev_err(&client->dev, "Check data tag failed !\n"); > + return -EBADRQC; > + } > + > + /* the length should be equal */ > + if (length != u32_data[1]) { > + dev_err(&client->dev, "Check data length failed !\n"); > + return -EINVAL; > + } > + > + memcpy(format_chunk, &u32_data[3], sizeof(struct format_chunk_st)); > + > + dev_dbg(&client->dev, "version checking\n"); > + > + /* get the version number from the firmware */ > + err = get_chunk_info(fw, CHUNK_ID_FRWR, &chunk_info_ex, > + format_chunk); > + if (err) { > + dev_err(&client->dev, "can not extract data !\n"); > + return -EBADR; > + } > + > + fw_id = ((chunk_info_ex.chunk_info.version_number >> 12) & 0xF); > + chip_id = (((dev_wdt87xx->sys_param.fw_id) >> 12) & 0xF); > + > + if (fw_id != chip_id) { > + wdt87xx_get_sysparam(client, dev_wdt87xx); > + chip_id = (((dev_wdt87xx->sys_param.fw_id) >> 12) & 0xF); > + > + if (fw_id != chip_id) { > + dev_err(&client->dev, "FW is not match: "); > + dev_err(&client->dev, "fw(%d), chip(%d)\n", > + fw_id, chip_id); > + return -ENODEV; > + } > + } > + > + return 0; > +} > + > +/* functions for the sysfs implementation */ static int > +wdt87xx_check_firmware(struct chunk_info_ex_st *chunk_info_ex, > + int ck_id) > +{ > + /* check the pointer is null */ > + if (!chunk_info_ex) > + return -EINVAL; > + > + if (ck_id == CHUNK_ID_FRWR) { > + unsigned int is_found = 0; > + unsigned char firmware_id[] = { 0xf5, 0x68, 0xe3, 0xa9 }; > + > + if (memcmp(chunk_info_ex->data, firmware_id, 4) == 0) > + is_found = 1; > + else > + return -EFAULT; > + > + if (is_found) > + return 0; > + } > + > + return 0; > +} > + > +static int wdt87xx_set_feature(struct i2c_client *client, char *buf, > + unsigned int buf_size) > +{ > + int err = 0; > + union req_data_un *req_data = (union req_data_un *) buf; > + int data_len = 0; > + /* for set/get packets used */ > + unsigned char xfer_buffer[80]; > + > + /* buffer size must be smaller than 64 */ > + if (buf_size > 64) > + buf_size = 64; > + > + /* set feature command packet */ > + xfer_buffer[data_len++] = 0x22; > + xfer_buffer[data_len++] = 0x00; > + if (req_data->defined_data.report_id > 0xF) { > + xfer_buffer[data_len++] = 0x30; > + xfer_buffer[data_len++] = 0x03; > + xfer_buffer[data_len++] = (req_data->defined_data.report_id); > + } else { > + xfer_buffer[data_len++] = 0x30 | > + (req_data->defined_data.report_id); > + xfer_buffer[data_len++] = 0x03; > + } > + xfer_buffer[data_len++] = 0x23; > + xfer_buffer[data_len++] = 0x00; > + xfer_buffer[data_len++] = (buf_size & 0xFF); > + xfer_buffer[data_len++] = ((buf_size & 0xFF00) >> 8); > + > + memcpy(&xfer_buffer[data_len], buf, buf_size); > + > + err = wdt87xx_i2c_txdata(client, xfer_buffer, data_len + buf_size); > + > + if (err < 0) { > + dev_err(&client->dev, "error no: (%d)\n", err); > + return err; > + } > + > + mdelay(2); > + > + return 0; > +} > + > +static int wdt87xx_get_feature(struct i2c_client *client, char *buf, > + unsigned int buf_size) > +{ > + int err = 0; > + char tx_buffer[8]; > + char xfer_buffer[80]; > + union req_data_un *req_data = (union req_data_un *) buf; > + int data_len = 0; > + unsigned int xfer_length = 0; > + > + if (buf_size > 64) > + buf_size = 64; > + > + /* get feature command packet */ > + tx_buffer[data_len++] = 0x22; > + tx_buffer[data_len++] = 0x00; > + if (req_data->defined_data.report_id > 0xF) { > + tx_buffer[data_len++] = 0x30; > + tx_buffer[data_len++] = 0x02; > + tx_buffer[data_len++] = (req_data->defined_data.report_id); > + } else { > + tx_buffer[data_len++] = 0x30 | > + (req_data->defined_data.report_id); > + tx_buffer[data_len++] = 0x02; > + } > + tx_buffer[data_len++] = 0x23; > + tx_buffer[data_len++] = 0x00; > + > + err = wdt87xx_i2c_txrxdata(client, tx_buffer, data_len, xfer_buffer, > + buf_size + 2); > + > + if (err < 0) { > + dev_err(&client->dev, "error no: (%d)\n", err); > + return err; > + } > + > + /* check size and copy the return data */ > + xfer_length = (unsigned int) xfer_buffer[1]; > + xfer_length = (xfer_length << 8) | xfer_buffer[0]; > + > + if (buf_size < xfer_length) > + xfer_length = buf_size; > + > + memcpy(buf, &xfer_buffer[2], xfer_length); > + > + mdelay(2); > + > + return 0; > +} > + > +static int wdt87xx_get_string(struct i2c_client *client, char str_idx, > + char *buf, unsigned int buf_size) > +{ > + int err = 0; > + char tx_buffer[8] = { 0x22, 0x00, 0x13, 0x0E, > + 0x00, 0x23, 0x00, 0x00 }; > + char xfer_buffer[80]; > + unsigned int xfer_length; > + > + if (buf_size > 64) > + buf_size = 64; > + > + tx_buffer[4] = str_idx; > + > + err = wdt87xx_i2c_txrxdata(client, tx_buffer, 7, xfer_buffer, > + buf_size + 2); > + > + if (err < 0) { > + dev_err(&client->dev, "error no: (%d)\n", err); > + return err; > + } > + > + if (xfer_buffer[1] != 0x03) { > + dev_err(&client->dev, "error str id: (%d)\n", xfer_buffer[1]); > + return -EBADRQC; > + } > + > + xfer_length = xfer_buffer[0]; > + > + if (buf_size < xfer_length) > + xfer_length = buf_size; > + > + memcpy(buf, &xfer_buffer[2], xfer_length); > + > + mdelay(2); > + > + return 0; > +} > + > + > +static int wdt87xx_send_command(struct i2c_client *client, int cmd, > +int value) { > + union cmd_data_un cmd_data; > + > + /* set the command packet */ > + cmd_data.defined_data.report_id = VND_REQ_WRITE; > + cmd_data.defined_data.type = VND_SET_COMMAND_DATA; > + cmd_data.defined_data.index = (unsigned short) cmd; > + > + switch (cmd) { > + case VND_CMD_START: > + case VND_CMD_STOP: > + case VND_CMD_RESET: > + /* mode selector */ > + cmd_data.defined_data.length = (char) (value & 0xFF); > + break; > + case VND_CMD_SFLCK: > + put_unaligned_le16(0xC39B, &cmd_data.buffer[3]); > + break; > + case VND_CMD_SFUNL: > + put_unaligned_le16(0x95DA, &cmd_data.buffer[3]); > + break; > + case VND_CMD_ERASE: > + case VND_SET_CHECKSUM_CALC: > + case VND_SET_CHECKSUM_LENGTH: > + put_unaligned_le32(value, &cmd_data.buffer[3]); > + break; > + default: > + cmd_data.defined_data.report_id = 0; > + dev_err(&client->dev, "Invalid command: (%d)", cmd); > + return -EINVAL; > + } > + > + return wdt87xx_set_feature(client, &cmd_data.buffer[0], > + sizeof(cmd_data)); > +} > + > +static int wdt87xx_write_data(struct i2c_client *client, > + const char *data, unsigned int address, int length) { > + unsigned int addr_start, data_len, packet_size; > + int count = 0; > + int err = 0; > + union req_data_un req_data; > + const char *source_data = 0; > + > + source_data = data; > + data_len = length; > + addr_start = address; > + > + /* address and length should be 4 bytes alignment */ > + if ((addr_start & 0x3) != 0 || (data_len & 0x3) != 0) { > + dev_err(&client->dev, "addr & len must be aligned %x, %x\n", > + addr_start, data_len); > + return -EFAULT; > + } > + > + packet_size = PACKET_SIZE; > + > + req_data.defined_data.report_id = VND_REQ_WRITE; > + req_data.defined_data.type = VND_SET_DATA; > + > + while (data_len) { > + if (data_len < PACKET_SIZE) > + packet_size = data_len; > + > + req_data.defined_data.index = packet_size; > + req_data.defined_data.length = addr_start; > + > + memcpy(req_data.defined_data.data, source_data, packet_size); > + > + err = wdt87xx_set_feature(client, req_data.buffer, 64); > + > + if (err) > + break; > + > + data_len = data_len - packet_size; > + source_data = source_data + packet_size; > + addr_start = addr_start + packet_size; > + > + count++; > + > + mdelay(4); > + > + if ((count % 64) == 0) { > + count = 0; > + dev_dbg(&client->dev, "#"); > + } > + } > + > + dev_dbg(&client->dev, "#\n"); > + > + return err; > +} > + > +static unsigned short misr(unsigned short currentValue, > + unsigned char newValue) > +{ > + unsigned int a, b; > + unsigned int bit0; > + unsigned int y; > + > + a = currentValue; > + b = newValue; > + bit0 = a^(b&1); > + bit0 ^= a>>1; > + bit0 ^= a>>2; > + bit0 ^= a>>4; > + bit0 ^= a>>5; > + bit0 ^= a>>7; > + bit0 ^= a>>11; > + bit0 ^= a>>15; > + y = (a<<1)^b; > + y = (y&~1) | (bit0&1); > + > + return (unsigned short) y; > +} > + > +static int wdt87xx_get_checksum(struct i2c_client *client, > + unsigned int *checksum, unsigned int address, int length) { > + int err = 0; > + int time_delay = 0; > + union req_data_un req_data; > + union cmd_data_un cmd_data; > + > + err = wdt87xx_send_command(client, VND_SET_CHECKSUM_LENGTH, length); > + if (err) { > + dev_err(&client->dev, "set checksum length fail (%d)\n", err); > + return err; > + } > + > + err = wdt87xx_send_command(client, VND_SET_CHECKSUM_CALC, address); > + if (err) { > + dev_err(&client->dev, "calc checksum fail (%d)\n", err); > + return err; > + } > + > + time_delay = (length + 1023) / 1024; > + /* to wait the operation compeletion */ > + msleep(time_delay * 10); > + > + cmd_data.defined_data.report_id = VND_REQ_READ; > + cmd_data.defined_data.type = VND_GET_CHECKSUM; > + cmd_data.defined_data.index = 0; > + cmd_data.defined_data.length = 0; > + > + err = wdt87xx_set_feature(client, cmd_data.buffer, 8); > + if (err) { > + dev_err(&client->dev, "checksum set read fail (%d)\n", err); > + return err; > + } > + > + memset(req_data.buffer, 0, 64); > + req_data.defined_data.report_id = VND_READ_DATA; > + err = wdt87xx_get_feature(client, req_data.buffer, 64); > + if (err) { > + dev_err(&client->dev, "read checksum fail (%d)\n", err); > + return err; > + } > + > + *checksum = (req_data.buffer[9] << 8) | (req_data.buffer[8]); > + > + return err; > +} > + > +static unsigned short fw_checksum(const unsigned char *data, > + unsigned int length) > +{ > + unsigned int i; > + unsigned short checksum = 0; > + > + checksum = 0x0000; > + > + for (i = 0; i < length; i++) > + checksum = misr(checksum, data[i]); > + > + return checksum; > +} > + > +static int wdt87xx_write_firmware(struct i2c_client *client, > + struct chunk_info_ex_st *chunk_info_ex, int type) { > + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); > + int err = 0; > + int err1 = 0; > + int size; > + int start_addr = 0; > + int page_size; > + int retry_count = 0; > + int is_equal = 0; > + int max_retries; > + unsigned int calc_checksum = 0; > + unsigned int read_checksum = 0; > + const char *data; > + > + dev_info(&client->dev, "start 4k page program\n"); > + > + err = wdt87xx_send_command(client, VND_CMD_STOP, MODE_STOP); > + if (err) { > + dev_err(&client->dev, "command stop fail (%d)\n", err); > + return err; > + } > + > + err = wdt87xx_send_command(client, VND_CMD_SFUNL, 0); > + if (err) { > + dev_err(&client->dev, "command sfunl fail (%d)\n", err); > + goto write_fail; > + } > + > + mdelay(10); > + > + start_addr = chunk_info_ex->chunk_info.target_start_addr; > + size = chunk_info_ex->chunk_info.length; > + data = chunk_info_ex->data; > + > + max_retries = dev_wdt87xx->max_retries; > + > + dev_info(&client->dev, "%x, %x, %d\n", start_addr, size, > +max_retries); > + > + while (size && !err) { > + is_equal = 0; > + if (size > PG_SIZE) { > + page_size = PG_SIZE; > + size = size - PG_SIZE; > + } else { > + page_size = size; > + size = 0; > + } > + > + for (retry_count = 0; retry_count < max_retries && !is_equal; > + retry_count++) { > + err = wdt87xx_send_command(client, VND_CMD_ERASE, > + start_addr); > + if (err) { > + dev_err(&client->dev, "erase fail (%d)\n", > + err); > + break; > + } > + > + msleep(50); > + > + err = wdt87xx_write_data(client, data, start_addr, > + page_size); > + if (err) { > + dev_err(&client->dev, "write data fail (%d)\n", > + err); > + break; > + } > + > + read_checksum = 0; > + err = wdt87xx_get_checksum(client, &read_checksum, > + start_addr, page_size); > + if (err) > + break; > + > + calc_checksum = fw_checksum(data, page_size); > + > + if (read_checksum == calc_checksum) > + is_equal = 1; > + else { > + dev_err(&client->dev, "checksum fail: (%d)", > + retry_count); > + dev_err(&client->dev, ",(%d), (%d)\n", > + read_checksum, calc_checksum); > + } > + } > + > + if (retry_count == MAX_RETRIES) { > + dev_err(&client->dev, "write page fail\n"); > + err = -EIO; > + } > + > + start_addr = start_addr + page_size; > + data = data + page_size; > + dev_info(&client->dev, "%x, %x\n", start_addr, size); > + } > +write_fail: > + err1 = wdt87xx_send_command(client, VND_CMD_SFLCK, 0); > + if (err1) > + dev_err(&client->dev, "command sflck fail (%d)\n", err1); > + > + mdelay(10); > + > + err1 = wdt87xx_send_command(client, VND_CMD_START, 0); > + if (err1) > + dev_err(&client->dev, "command start fail (%d)\n", err1); > + > + dev_info(&client->dev, "stop 4k page program : "); > + > + if (err || err1) > + dev_info(&client->dev, "fail\n"); > + else > + dev_info(&client->dev, "pass\n"); > + > + if (err1) > + return err1; > + > + return err; > +} > + > +static int wdt87xx_sw_reset(struct i2c_client *client) { > + int err = 0; > + > + dev_info(&client->dev, "reset device now\n"); > + > + err = wdt87xx_send_command(client, VND_CMD_RESET, 0); > + if (err) { > + dev_err(&client->dev, "command reset fail (%d)\n", err); > + return err; > + } > + > + msleep(100); > + > + return 0; > +} > + > +static int wdt87xx_load_chunk(struct i2c_client *client, > + const struct firmware *fw, > + struct format_chunk_st *format_chunk, unsigned int ck_id) { > + int err = 0; > + struct chunk_info_ex_st chunk_info_ex; > + > + err = get_chunk_info(fw, ck_id, &chunk_info_ex, format_chunk); > + if (err) { > + dev_err(&client->dev, "can not get the fw !\n"); > + goto failed; > + } > + > + /* Check for incorrect bin file */ > + err = wdt87xx_check_firmware(&chunk_info_ex, ck_id); > + if (err) { > + dev_err(&client->dev, "invalid chunk : (%d)\n", ck_id); > + goto failed; > + } > + > + err = wdt87xx_write_firmware(client, &chunk_info_ex, ck_id); > + if (err) > + dev_err(&client->dev, "write firmware failed : (%d)\n", > + ck_id); > + > +failed: > + return err; > +} > + > +static int wdt87xx_load_fw(struct device *dev, const char *fn, int > +type) { > + struct i2c_client *client = to_i2c_client(dev); > + const struct firmware *fw = 0; > + int err = 0; > + struct format_chunk_st format_chunk; > + > + err = request_firmware(&fw, fn, dev); > + if (err) { > + dev_err(&client->dev, "unable to open firmware %s\n", fn); > + return err; > + } > + > + disable_irq(client->irq); > + > + err = process_fw_data(client, fw, &format_chunk); > + if (err) { > + dev_err(&client->dev, "bad fw file !\n"); > + goto release_firmware; > + } > + > + if (type & WDT87XX_FW) { > + err = wdt87xx_load_chunk(client, fw, &format_chunk, > + CHUNK_ID_FRWR); > + if (err) { > + dev_err(&client->dev, "load fw chunk failed !\n"); > + goto release_firmware; > + } > + } > + > + if (type & WDT87XX_CFG) { > + err = wdt87xx_load_chunk(client, fw, &format_chunk, > + CHUNK_ID_CNFG); > + if (err) { > + dev_err(&client->dev, "load cfg chunk failed !\n"); > + goto release_firmware; > + } > + } > + > + err = wdt87xx_sw_reset(client); > + > + if (err) > + dev_err(&client->dev, "software reset failed !\n"); > + > +release_firmware: > + enable_irq(client->irq); > + > + mdelay(10); > + release_firmware(fw); > + return err; > +} > + > +static ssize_t wdt87xx_update_fw(struct device *dev, > + struct device_attribute *attr, const char *buf, size_t count) { > + struct i2c_client *client = to_i2c_client(dev); > + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); > + int err = 0; > + int option = 0; > + > + if (count > 0) > + option = buf[0] - '0'; "Normal" sysfs attributes operate on strings (unlike binary attribues). Please use appropriate kstrtoXX()to convert string to number. I also wonder if we should create 2 attributes, one to load config and another to load firmware, instead of doing this "combo" attribute. > + > + dev_info(dev, "update option (%d)\n", option); > + if (option < 1 || option > 3) { > + dev_err(&client->dev, "option is not supported\n"); > + return -1; > + } > + > + err = mutex_lock_interruptible(&dev_wdt87xx->sysfs_mutex); > + if (err) > + return err; > + > + err = wdt87xx_load_fw(dev, WDT87XX_FW_NAME, option); > + if (err) { > + dev_err(&client->dev, "the firmware update failed(%d)\n", > + err); > + count = err; > + } > + > + mutex_unlock(&dev_wdt87xx->sysfs_mutex); > + > + return count; > +} > + > +static ssize_t wdt87xx_max_retries(struct device *dev, > + struct device_attribute *attr, const char *buf, size_t count) { > + struct i2c_client *client = to_i2c_client(dev); > + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); > + > + int option = 0; > + > + if (count > 0) > + option = buf[0] - '0'; > + > + dev_wdt87xx->max_retries = option; Why would user decide to change this value and how they will select it? > + dev_info(dev, "max retries (%d)\n", option); > + > + return count; > +} > + > +static ssize_t wdt87xx_show_info(struct device *dev, > + struct device_attribute *attr, char *buf) { > + struct i2c_client *client = to_i2c_client(dev); > + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); > + struct sys_param_st *sys_param = &dev_wdt87xx->sys_param; > + > + wdt87xx_get_sysparam(client, dev_wdt87xx); > + > + return scnprintf(buf, PAGE_SIZE, "%x,%x,%4x,%4x\n", sys_param->fw_id, > + sys_param->plat_id, sys_param->xmls_id1, > + sys_param->xmls_id2); sysfs has "one value per attribute" rule, please split this. > +} > + > +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, wdt87xx_update_fw); > +static DEVICE_ATTR(max_retries, S_IWUSR, NULL, wdt87xx_max_retries); > +static DEVICE_ATTR(show_info, S_IRUGO, wdt87xx_show_info, NULL); > + > +static struct attribute *wdt87xx_attrs[] = { > + &dev_attr_update_fw.attr, > + &dev_attr_max_retries.attr, > + &dev_attr_show_info.attr, > + NULL You just need one tab to indent here. > +}; > + > +static const struct attribute_group wdt87xx_attr_group = { > + .attrs = wdt87xx_attrs, Here as well. > +}; > + > +static int wdt87xx_i2c_txrxdata(struct i2c_client *client, char *txdata, > + int txlen, char *rxdata, int rxlen) { > + int err = 0; No need to initialize err here. > + > + struct i2c_msg msgs[] = { > + { > + .addr = client->addr, > + .flags = 0, > + .len = txlen, > + .buf = txdata, > + }, > + { > + .addr = client->addr, > + .flags = I2C_M_RD, > + .len = rxlen, > + .buf = rxdata, > + }, > + }; > + > + err = i2c_transfer(client->adapter, msgs, 2); > + > + if (err < 0) > + dev_err(&client->dev, "%s: i2c read error (%d)\n", > + __func__, err); You also want to handle case err != ARRAY_SIZE(msgs) and convert it to -EIO; > + > + return err; > +} > + > +static int wdt87xx_i2c_rxdata(struct i2c_client *client, char *rxdata, > + int length) > +{ > + int err = 0; > + > + struct i2c_msg msgs[] = { > + { > + .addr = client->addr, > + .flags = I2C_M_RD, > + .len = length, > + .buf = rxdata, > + }, > + }; > + > + err = i2c_transfer(client->adapter, msgs, 1); Why not simply i2c_master_recv()? > + > + if (err < 0) > + dev_err(&client->dev, "%s: i2c read error (%d)\n", > + __func__, err); > + > + return err; > +} > + > +static int wdt87xx_i2c_txdata(struct i2c_client *client, char *txdata, > + int length) > +{ > + int err = 0; > + > + struct i2c_msg msg[] = { > + { > + .addr = client->addr, > + .flags = 0, > + .len = length, > + .buf = txdata, > + }, > + }; > + > + err = i2c_transfer(client->adapter, msg, 1); And i2c_master_send() here. > + if (err < 0) > + dev_err(&client->dev, "%s: i2c write error (%d)\n", > + __func__, err); > + > + return err; > +} > + > +static void wdt87xx_ts_handle_irq(struct wdt87xx_ts_data *data) { > + struct wdt87xx_ts_data *dev_wdt87xx = data; > + int err = 0; Please only initialize when actually needed. > + int i, points; > + struct i2c_client *client = dev_wdt87xx->client; > + struct wdt_touch_events_st *ptr_touch_event = 0; > + u8 raw_buf[64] = {0}; > + > + static u8 points_last_flag[WDT_MAX_POINT<<1] = {0}; No statics please? What if you have a system with 2 such devices? Keep state in device-local data (i.e. wdt87xx_ts_data). > + > + err = wdt87xx_i2c_rxdata(client, raw_buf, WDT_RAW_BUF_COUNT); > + > + if (err < 0) { > + dev_err(&client->dev, "read raw data fail (%d)\n", err); > + return; > + } > + > + /* touch finger count */ > + points = raw_buf[53]; > + > + dev_dbg(&client->dev, "point: (%d)\n", points); > + > + if (points == 0) { > + for (i = 0; i < WDT_MAX_POINT; i++) { > + /* force to send event of tip off */ > + if (points_last_flag[i] != 0) { > + dev_dbg(&client->dev, "tip off (%d)\n", i); > + input_mt_slot(dev_wdt87xx->input_dev, i); > + input_mt_report_slot_state( > + dev_wdt87xx->input_dev, > + MT_TOOL_FINGER, false); > + } > + } > + > + memset(points_last_flag, 0, sizeof(points_last_flag)); > + > + input_sync(dev_wdt87xx->input_dev); > + return; I do not think you need to handle this explicitly. > + } > + > + ptr_touch_event = (struct wdt_touch_events_st *) raw_buf; > + > + dev_dbg(&client->dev, "+++++++++\n"); > + > + for (i = 0; i < WDT_MAX_POINT; i++) { > + int point_id = (ptr_touch_event->touch_event[i].id >> 3) - 1; > + > + if (point_id < 0) > + continue; > + > + /* tip off */ > + if (((ptr_touch_event->touch_event[i].id & 0x1) == 0) && > + (points_last_flag[point_id] != 0)) { > + dev_dbg(&client->dev, "tip on (%d)\n", point_id); > + input_mt_slot(dev_wdt87xx->input_dev, point_id); > + input_mt_report_slot_state(dev_wdt87xx->input_dev, > + MT_TOOL_FINGER, false); > + } else /* tip on */ > + if (ptr_touch_event->touch_event[i].id & 0x1) { > + unsigned int point_x, point_y; > + > + /* incorrect coordinate */ > + if (ptr_touch_event->touch_event[i].x > 0x7FFF || > + ptr_touch_event->touch_event[i].y > 0x7FFF) > + continue; > + > + point_x = ptr_touch_event->touch_event[i].x; > + point_y = ptr_touch_event->touch_event[i].y; > + > + dev_dbg(&client->dev, "tip on (%d), x(%d), y(%d)\n", > + i, point_x, point_y); > + > + input_mt_slot(dev_wdt87xx->input_dev, point_id); > + input_mt_report_slot_state(dev_wdt87xx->input_dev, > + MT_TOOL_FINGER, true); > + input_report_abs(dev_wdt87xx->input_dev, > + ABS_MT_TOUCH_MAJOR, 1); > + input_report_abs(dev_wdt87xx->input_dev, > + ABS_MT_POSITION_X, point_x); > + input_report_abs(dev_wdt87xx->input_dev, > + ABS_MT_POSITION_Y, point_y); > + } > + points_last_flag[point_id] = > + (ptr_touch_event->touch_event[i].id & 0x1); > + } Just report slots that are active and instruct input code to drop unused slots for you (by using INPUT_MT_DROP_UINUSED with input_mt_init_slots). > + > + input_sync(dev_wdt87xx->input_dev); > +} > + > +static irqreturn_t wdt87xx_ts_interrupt(int irq, void *dev_id) { > + struct wdt87xx_ts_data *dev_wdt87xx = > + (struct wdt87xx_ts_data *) dev_id; > + > + wdt87xx_ts_handle_irq(dev_wdt87xx); Why do you need this extra wrapper? > + > + return IRQ_HANDLED; > +} > + > +static int wdt87xx_ts_request_irq(struct i2c_client *client) { > + int err = 0; > + struct wdt87xx_ts_data *dev_wdt87xx; > + > + dev_wdt87xx = (struct wdt87xx_ts_data *) i2c_get_clientdata(client); No need to cast. > + > +/* > + * once using the ACPI, we shall get the irq number from the client > + * if it is not in the ACPI, we shall get a irq number from the gpio > +*/ > +#ifndef CONFIG_ACPI > + client->irq = 0; > + > + /* request a selected gpio */ > + err = gpio_request(DINT_GPIO_NUM, "GPIO DINT"); > + if (err < 0) { > + dev_err(&client->dev, "%s: request gpio fail (%d)\n", > + __func__, err); > + return -EINVAL; > + } > + > + /* request a irq no */ > + client->irq = gpio_to_irq(DINT_GPIO_NUM); > + if (client->irq < 0) { > + dev_err(&client->dev, "%s: request irq fail (%d)\n", > + __func__, client->irq); > + return -EINVAL; > + } > + > + gpio_direction_input(DINT_GPIO_NUM); > + gpio_set_value(DINT_GPIO_NUM, 1); This should be done by board code, not by the driver, as GPIO number will not be the same on all boards that use ACPI. Yiou may have to carry this change locally in your tree for the existing board. > +#endif > + > + irq_set_irq_type(client->irq, IRQ_TYPE_EDGE_FALLING); This also should be done by board/OF code. > + > + err = request_threaded_irq(client->irq, NULL, wdt87xx_ts_interrupt, > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, I would prefer the driver rely on board/OF code to set up the trigger and only use IRQF_ONESHOT here. > + client->name, dev_wdt87xx); > + > + if (err < 0) { > + dev_err(&client->dev, "%s: request threaded irq fail (%d)\n", > + __func__, err); > + return err; > + } > + > + disable_irq_nosync(client->irq); > + > + return 0; > +} > + > +static int wdt87xx_ts_create_input_device(struct i2c_client *client) > +{ > + int err = 0; > + struct wdt87xx_ts_data *dev_wdt87xx; > + struct input_dev *input_dev; > + > + dev_wdt87xx = (struct wdt87xx_ts_data *) i2c_get_clientdata(client); > + > + input_dev = input_allocate_device(); > + if (!input_dev) { > + dev_err(&client->dev, "%s: failed to allocate input device\n", > + __func__); > + return -ENOMEM; > + } > + > + dev_wdt87xx->input_dev = input_dev; > + > + input_dev->name = "WDT87xx Touchscreen"; > + input_dev->id.bustype = BUS_I2C; > + > + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); > + > + /* for single touch */ > + set_bit(ABS_X, input_dev->absbit); > + set_bit(ABS_Y, input_dev->absbit); > + input_set_abs_params(input_dev, ABS_X, 0, SCREEN_LOGICAL_MAX_X, 0, 0); > + input_set_abs_params(input_dev, ABS_Y, 0, SCREEN_LOGICAL_MAX_Y, 0, 0); > + input_abs_set_res(input_dev, ABS_X, WDT_UNITS_PER_MM); > + input_abs_set_res(input_dev, ABS_Y, WDT_UNITS_PER_MM); > + > + input_mt_init_slots(input_dev, WDT_MAX_POINT, INPUT_MT_DIRECT); > + > + set_bit(ABS_MT_TOUCH_MAJOR, input_dev->absbit); > + set_bit(ABS_MT_POSITION_X, input_dev->absbit); > + set_bit(ABS_MT_POSITION_Y, input_dev->absbit); > + set_bit(ABS_MT_WIDTH_MAJOR, input_dev->absbit); > + > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, > + SCREEN_LOGICAL_MAX_X, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, > + SCREEN_LOGICAL_MAX_Y, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 0xFF, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 200, 0, 0); > + input_abs_set_res(input_dev, ABS_MT_POSITION_X, WDT_UNITS_PER_MM); > + input_abs_set_res(input_dev, ABS_MT_POSITION_Y, WDT_UNITS_PER_MM); > + > + set_bit(ABS_PRESSURE, input_dev->absbit); > + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xFF, 0, 0); > + > + input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0, > + WDT_MAX_POINT, 0, 0); > + > + set_bit(EV_ABS, input_dev->evbit); > + set_bit(EV_SYN, input_dev->evbit); > + > + err = input_register_device(input_dev); > + if (err) { > + dev_err(&client->dev, "register input device fail (%d)\n", > + err); You are leaking input device here. > + return err; > + } > + > + return 0; > +} > + > +static int wdt87xx_ts_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct wdt87xx_ts_data *dev_wdt87xx; > + int err = 0; > + > + dev_dbg(&client->dev, "wdt87xx : adapter=(%d), client irq:(%d)\n", > + client->adapter->nr, client->irq); > + > + /* check if the I2C function is ok in this adaptor */ > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > + err = -ENODEV; > + goto exit_check_functionality_fail; Just do return -ENODEV; > + } > + > + dev_dbg(&client->dev, "kzalloc\n"); > + dev_wdt87xx = (struct wdt87xx_ts_data *) No nedd to cast. > + kzalloc(sizeof(struct wdt87xx_ts_data), GFP_KERNEL); Consider using devm* API to simplify error handling. > + if (!dev_wdt87xx) { > + err = -ENOMEM; > + goto exit_alloc_data_fail; > + } > + > + dev_dbg(&client->dev, "i2c_set_clientdata\n"); > + > + dev_wdt87xx->client = client; > + mutex_init(&dev_wdt87xx->sysfs_mutex); > + i2c_set_clientdata(client, dev_wdt87xx); > + dev_wdt87xx->max_retries = MAX_RETRIES; > + > + dev_dbg(&client->dev, "wdt87xx_ts_request_irq\n"); > + err = wdt87xx_ts_request_irq(client); > + if (err < 0) { > + dev_err(&client->dev, "request irq fail (%d)\n", err); > + goto exit_gpio_request_fail; > + } > + > + dev_dbg(&client->dev, "wdt87xx_ts_create_input_device\n"); > + err = wdt87xx_ts_create_input_device(client); > + if (err < 0) { > + dev_err(&client->dev, "create input device fail (%d)\n", err); > + goto exit_input_register_device_fail; > + } > + > + dev_dbg(&client->dev, "sysfs_create_group\n"); > + err = sysfs_create_group(&client->dev.kobj, &wdt87xx_attr_group); > + if (err) { > + dev_err(&client->dev, "create sysfs fail (%d)\n", err); > + goto err_free_object; > + } > + > + enable_irq(client->irq); > + > + dev_dbg(&client->dev, "%s leave\n", __func__); > + > + return 0; > + > +err_free_object: > +exit_input_register_device_fail: > + input_free_device(dev_wdt87xx->input_dev); > + > + > +exit_gpio_request_fail: > +#ifndef CONFIG_ACPI > + gpio_free(DINT_GPIO_NUM); > +#endif > + if (client->irq) > + free_irq(client->irq, dev_wdt87xx); > + > + i2c_set_clientdata(client, NULL); > + > + kfree(dev_wdt87xx); > +exit_alloc_data_fail: > +exit_check_functionality_fail: > + > + return err; > +} > + > +static int wdt87xx_ts_remove(struct i2c_client *client) { > + struct wdt87xx_ts_data *dev_wdt87xx = > + (struct wdt87xx_ts_data *) i2c_get_clientdata(client); > + > + dev_dbg(&client->dev, "==%s==\n", __func__); > + > + sysfs_remove_group(&client->dev.kobj, &wdt87xx_attr_group); > + > + input_unregister_device(dev_wdt87xx->input_dev); > + input_free_device(dev_wdt87xx->input_dev); This is double-free. Once input device is registered you should only unregister. > + > +#ifndef CONFIG_ACPI > + gpio_free(DINT_GPIO_NUM); > +#endif > + > + if (client->irq) > + free_irq(client->irq, dev_wdt87xx); This is racy. IRQ may fire but input device is already gone. > + > + i2c_set_clientdata(client, NULL); No need, driver core will do this for you. > + kfree(dev_wdt87xx); > + > + return 0; > +} > + > +static int __maybe_unused wdt87xx_suspend(struct device *dev) { > + struct i2c_client *client = to_i2c_client(dev); > + int err = 0; > + > + dev_dbg(&client->dev, "enter %s\n", __func__); > + > + disable_irq(client->irq); > + > + err = wdt87xx_send_command(client, VND_CMD_STOP, MODE_IDLE); > + if (err) > + dev_err(&client->dev, "%s: command stop fail (%d)\n", > + __func__, err); > + > + return err; > +} > + > +static int __maybe_unused wdt87xx_resume(struct device *dev) { > + struct i2c_client *client = to_i2c_client(dev); > + int err = 0; > + > + /* once the chip is reset before resume, */ > + /* we need some time to wait it is stable */ > + mdelay(100); > + > + err = wdt87xx_send_command(client, VND_CMD_START, 0); > + if (err) > + dev_err(&client->dev, "%s: command start fail (%d)\n", > + __func__, err); > + > + enable_irq(client->irq); > + > + dev_dbg(&client->dev, "leave %s\n", __func__); > + > + return 0; > +} > + > +static SIMPLE_DEV_PM_OPS(wdt87xx_pm_ops, wdt87xx_suspend, > +wdt87xx_resume); > + > +static const struct i2c_device_id wdt87xx_dev_id[] = { > + { WDT87XX_NAME, 0 }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(i2c, wdt87xx_dev_id); > + > +#ifdef CONFIG_ACPI > +static const struct acpi_device_id wdt87xx_acpi_id[] = { > + { "WDHT0001", 0 }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(acpi, wdt87xx_acpi_id); #endif > + > +static struct i2c_driver wdt87xx_driver = { > + .probe = wdt87xx_ts_probe, > + .remove = wdt87xx_ts_remove, > + .id_table = wdt87xx_dev_id, > + .driver = { > + .name = WDT87XX_NAME, > + .owner = THIS_MODULE, > + .pm = &wdt87xx_pm_ops, > +#ifdef CONFIG_ACPI No need for this ifdef, ACPI_PTR is stubbed properly. > + .acpi_match_table = ACPI_PTR(wdt87xx_acpi_id), #endif > + }, > +}; > + > +module_i2c_driver(wdt87xx_driver); > + > +MODULE_AUTHOR("HN Chen <hn.chen@weidahitech.com>"); > +MODULE_DESCRIPTION("WeidaHiTech WDT87XX Touchscreen driver"); > +MODULE_VERSION(WDT87XX_DRV_VER); MODULE_LICENSE("GPL"); > + > -- > 1.9.1 > Thanks.
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 80f6386..0c1a6cc 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -658,6 +658,18 @@ config TOUCHSCREEN_PIXCIR To compile this driver as a module, choose M here: the module will be called pixcir_i2c_ts. +config TOUCHSCREEN_WDT87XX_I2C + tristate "Weida HiTech I2C touchscreen" + depends on I2C + help + Say Y here if you have an Weida WDT87XX I2C touchscreen + connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called wdt87xx_i2c. + config TOUCHSCREEN_WM831X tristate "Support for WM831x touchscreen controllers" depends on MFD_WM831X diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 44deea7..fa3d33b 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -72,6 +72,7 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o obj-$(CONFIG_TOUCHSCREEN_WACOM_I2C) += wacom_i2c.o +obj-$(CONFIG_TOUCHSCREEN_WDT87XX_I2C) += wdt87xx_i2c.o obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c new file mode 100644 index 0000000..c79439c --- /dev/null +++ b/drivers/input/touchscreen/wdt87xx_i2c.c @@ -0,0 +1,1501 @@ +/* + * drivers/input/touchscreen/wdt87xx_i2c.c + * + * Weida HiTech WDT87xx TouchScreen I2C driver + * + * Copyright (c) 2014 Weida HiTech Ltd. + * HN Chen <hn.chen@weidahitech.com> + * + * This software is licensed under the terms of the GNU General Public + * License, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * Note: this is a I2C device driver and report touch events througt the + * input device + */ + + +#include <linux/version.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/ioc4.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/slab.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <linux/input/mt.h> +#include <asm/unaligned.h> + +#ifdef CONFIG_ACPI +#include <linux/acpi.h> +#endif + +#define WDT87XX_NAME "wdt87xx_i2c" +#define WDT87XX_DRV_VER "0.9.1" +#define WDT87XX_FW_NAME "wdt87xx_fw.bin" + +#define WDT87XX_FW 1 +#define WDT87XX_CFG 2 + +#define MODE_ACTIVE 0x01 +#define MODE_READY 0x02 +#define MODE_IDLE 0x03 +#define MODE_SLEEP 0x04 +#define MODE_STOP 0xFF + +#define WDT_MAX_POINT 10 +#define WDT_RAW_BUF_COUNT 54 + +#define PG_SIZE 0x1000 +#define MAX_RETRIES 3 + +#define WDT_UNITS_PER_MM 60 + +/* the definition for one touch point */ +struct wdt_touch_point_event_st { + unsigned char id; + unsigned short x; + unsigned short y; +} __packed; + + +/* the definition for a packet */ +struct wdt_touch_events_st { + unsigned char report_id; + struct wdt_touch_point_event_st touch_event[WDT_MAX_POINT]; + unsigned short scan_time; + unsigned char num_touches; +} __packed; + +/* the definition for the chip parameters */ +struct sys_param_st { + unsigned short fw_id; + unsigned short plat_id; + unsigned short xmls_id1; + unsigned short xmls_id2; + unsigned short phy_x; + unsigned short phy_y; +} __packed; + +/* the definition for this driver needed */ +struct wdt87xx_ts_data { + struct i2c_client *client; + struct input_dev *input_dev; +/* to protect the operation in sysfs */ + struct mutex sysfs_mutex; + unsigned int max_retries; + struct sys_param_st sys_param; +}; + +/* communacation commands */ +#define PACKET_SIZE 56 +#define VND_REQ_READ 0x06 +#define VND_READ_DATA 0x07 +#define VND_REQ_WRITE 0x08 + +#define VND_CMD_START 0x00 +#define VND_CMD_STOP 0x01 +#define VND_CMD_RESET 0x09 + +#define VND_CMD_ERASE 0x1A + +#define VND_GET_CHECKSUM 0x66 + +#define VND_SET_DATA 0x83 +#define VND_SET_COMMAND_DATA 0x84 +#define VND_SET_CHECKSUM_CALC 0x86 +#define VND_SET_CHECKSUM_LENGTH 0x87 + +#define VND_CMD_SFLCK 0xFC +#define VND_CMD_SFUNL 0xFD + +#define STRIDX_PLATFORM_ID 0x80 +#define STRIDX_PARAMETERS 0x81 + + +/* the definition of command structure */ +union cmd_data_un { + struct { + char report_id; + char type; + unsigned short index; + unsigned int length; + } defined_data; + char buffer[8]; +}; + +/* the definition of packet structure */ +union req_data_un { + struct { + char report_id; + char type; + unsigned short index; + unsigned int length; + char data[PACKET_SIZE]; + } defined_data; + char buffer[64]; +}; + +/* the definition of firmware data structure */ +struct chunk_info_st { + unsigned int target_start_addr; + unsigned int length; + unsigned int source_start_addr; + unsigned int version_number; + unsigned int attribute; + unsigned int temp; +}; + +struct chunk_data_st { + unsigned int ck_id; + unsigned int ck_size; + struct chunk_info_st chunk_info; + char *chunk_data; +}; + +struct format_chunk_st { + unsigned int ck_id; + unsigned int ck_size; + unsigned int number_chunk; + unsigned int enable_flag; + unsigned int checksum; + unsigned int temp1; + unsigned int temp2; +}; + +struct chunk_info_ex_st { + struct chunk_info_st chunk_info; + char *data; + unsigned int length; +}; + +/* the definition of firmware chunk tags */ +#define FOURCC_ID_RIFF 0x46464952 +#define FOURCC_ID_WHIF 0x46494857 +#define FOURCC_ID_FRMT 0x544D5246 +#define FOURCC_ID_FRWR 0x52575246 +#define FOURCC_ID_CNFG 0x47464E43 + +#define CHUNK_ID_FRMT 0x00 +#define CHUNK_ID_FRWR 0x01 +#define CHUNK_ID_CNFG 0x02 + +/* the definition of gpio & data irq */ +#ifndef CONFIG_ACPI +/* + * for kernel version >= 3.18.0, the gpio number is 338 + * #define DINT_GPIO_NUM 338 + */ +#define DINT_GPIO_NUM 82 +#endif + +/* for the touch report */ +static int SCREEN_LOGICAL_MAX_X = 0x7FFF; +static int SCREEN_LOGICAL_MAX_Y = 0x7FFF; + +/* output the error message */ +#define dev_err(__dev, x...) dev_err(__dev, x) + +static int wdt87xx_i2c_txrxdata(struct i2c_client *client, char *txdata, + int txlen, char *rxdata, int rxlen); +static int wdt87xx_i2c_rxdata(struct i2c_client *client, char *rxdata, + int length); +static int wdt87xx_i2c_txdata(struct i2c_client *client, char *txdata, + int length); +static int wdt87xx_set_feature(struct i2c_client *client, char *buf, + unsigned int buf_size); +static int wdt87xx_get_feature(struct i2c_client *client, char *buf, + unsigned int buf_size); +static int wdt87xx_get_string(struct i2c_client *client, char str_idx, + char *buf, unsigned int buf_size); + +static unsigned int get_chunk_fourcc(unsigned int chunk_index) +{ + switch (chunk_index) { + case CHUNK_ID_FRMT: + return FOURCC_ID_FRMT; + case CHUNK_ID_FRWR: + return FOURCC_ID_FRWR; + case CHUNK_ID_CNFG: + return FOURCC_ID_CNFG; + default: + return 0; + } + return 0; +} + +static int get_chunk_info(const struct firmware *fw, unsigned int chunk_index, + struct chunk_info_ex_st *chunk_info_ex, + struct format_chunk_st *format_chunk) +{ + unsigned int chunk_four_cc; + const char *data = 0; + unsigned int data_len = 0; + unsigned int is_found = 0; + + /* check the pointer is null */ + if (!fw || !chunk_info_ex || !format_chunk) + return -EINVAL; + + chunk_four_cc = get_chunk_fourcc(chunk_index); + + if (!chunk_four_cc) + return -EBADRQC; + + data = fw->data; + data_len = fw->size; + + /* check if the chunk is existed */ + if (format_chunk->enable_flag | chunk_index) { + unsigned int chunk_start_pos = 12 + + sizeof(struct format_chunk_st); + struct chunk_data_st *chunk_data = 0; + + while (chunk_start_pos < data_len && !is_found) { + chunk_data = (struct chunk_data_st *) + &data[chunk_start_pos]; + + /* the chunk is found */ + if (chunk_data->ck_id == chunk_four_cc) { + memcpy((void *) &chunk_info_ex->chunk_info, + (void *) &chunk_data->chunk_info, + sizeof(struct chunk_info_st)); + chunk_info_ex->length = + chunk_data->chunk_info.length; + chunk_info_ex->data = + (char *) &data[chunk_start_pos + 8 + + sizeof(struct chunk_info_st)]; + + is_found = 1; + } else { + chunk_start_pos = chunk_start_pos + + chunk_data->ck_size + 8; + } + } + } + + if (is_found) + return 0; + + return -ENODATA; +} + +static int wdt87xx_get_sysparam(struct i2c_client *client, + struct wdt87xx_ts_data *dev_wdt87xx) +{ + struct sys_param_st *sys_param = &dev_wdt87xx->sys_param; + char buffer[72]; + unsigned int *u32_data; + int err = 0; + + err = wdt87xx_get_string(client, STRIDX_PARAMETERS, buffer, 32); + if (err) { + dev_err(&client->dev, "get parameters error (%d)\n", err); + return err; + } + + memcpy((void *) &dev_wdt87xx->sys_param, buffer, + sizeof(struct sys_param_st)); + + err = wdt87xx_get_string(client, STRIDX_PLATFORM_ID, buffer, 8); + if (err) { + dev_err(&client->dev, "get platform id error (%d)\n", err); + return err; + } + + dev_wdt87xx->sys_param.plat_id = buffer[1]; + + buffer[0] = 0xf2; + err = wdt87xx_get_feature(client, buffer, 16); + if (err) { + dev_err(&client->dev, "get firmware id error (%d)\n", err); + return err; + } + + if (buffer[0] != 0xf2) { + dev_err(&client->dev, "fw id packet error !\n"); + return -EBADRQC; + } + + u32_data = (unsigned int *) &buffer[1]; + sys_param->fw_id = ((*u32_data) & 0xFFFF); + + dev_err(&client->dev, "fw_id: 0x%x, plat_id: 0x%x\n", + sys_param->fw_id, sys_param->plat_id); + dev_err(&client->dev, "xml_id1: %4x, xml_id2: %4x\n", + sys_param->xmls_id1, sys_param->xmls_id2); + + return 0; +} + +int process_fw_data(struct i2c_client *client, const struct firmware *fw, + struct format_chunk_st *format_chunk) +{ + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); + unsigned int length = 0; + struct chunk_info_ex_st chunk_info_ex; + int err = 0; + unsigned int *u32_data; + char fw_id; + char chip_id; + + /* check the pointer is null */ + if (!fw || !format_chunk) + return -EINVAL; + + u32_data = (unsigned int *) fw->data; + length = fw->size; + + if (u32_data[0] != FOURCC_ID_RIFF || u32_data[2] != FOURCC_ID_WHIF) { + dev_err(&client->dev, "Check data tag failed !\n"); + return -EBADRQC; + } + + /* the length should be equal */ + if (length != u32_data[1]) { + dev_err(&client->dev, "Check data length failed !\n"); + return -EINVAL; + } + + memcpy(format_chunk, &u32_data[3], sizeof(struct format_chunk_st)); + + dev_dbg(&client->dev, "version checking\n"); + + /* get the version number from the firmware */ + err = get_chunk_info(fw, CHUNK_ID_FRWR, &chunk_info_ex, + format_chunk); + if (err) { + dev_err(&client->dev, "can not extract data !\n"); + return -EBADR; + } + + fw_id = ((chunk_info_ex.chunk_info.version_number >> 12) & 0xF); + chip_id = (((dev_wdt87xx->sys_param.fw_id) >> 12) & 0xF); + + if (fw_id != chip_id) { + wdt87xx_get_sysparam(client, dev_wdt87xx); + chip_id = (((dev_wdt87xx->sys_param.fw_id) >> 12) & 0xF); + + if (fw_id != chip_id) { + dev_err(&client->dev, "FW is not match: "); + dev_err(&client->dev, "fw(%d), chip(%d)\n", + fw_id, chip_id); + return -ENODEV; + } + } + + return 0; +} + +/* functions for the sysfs implementation */ +static int wdt87xx_check_firmware(struct chunk_info_ex_st *chunk_info_ex, + int ck_id) +{ + /* check the pointer is null */ + if (!chunk_info_ex) + return -EINVAL; + + if (ck_id == CHUNK_ID_FRWR) { + unsigned int is_found = 0; + unsigned char firmware_id[] = { 0xf5, 0x68, 0xe3, 0xa9 }; + + if (memcmp(chunk_info_ex->data, firmware_id, 4) == 0) + is_found = 1; + else + return -EFAULT; + + if (is_found) + return 0; + } + + return 0; +} + +static int wdt87xx_set_feature(struct i2c_client *client, char *buf, + unsigned int buf_size) +{ + int err = 0; + union req_data_un *req_data = (union req_data_un *) buf; + int data_len = 0; + /* for set/get packets used */ + unsigned char xfer_buffer[80]; + + /* buffer size must be smaller than 64 */ + if (buf_size > 64) + buf_size = 64; + + /* set feature command packet */ + xfer_buffer[data_len++] = 0x22; + xfer_buffer[data_len++] = 0x00; + if (req_data->defined_data.report_id > 0xF) { + xfer_buffer[data_len++] = 0x30; + xfer_buffer[data_len++] = 0x03; + xfer_buffer[data_len++] = (req_data->defined_data.report_id); + } else { + xfer_buffer[data_len++] = 0x30 | + (req_data->defined_data.report_id); + xfer_buffer[data_len++] = 0x03; + } + xfer_buffer[data_len++] = 0x23; + xfer_buffer[data_len++] = 0x00; + xfer_buffer[data_len++] = (buf_size & 0xFF); + xfer_buffer[data_len++] = ((buf_size & 0xFF00) >> 8); + + memcpy(&xfer_buffer[data_len], buf, buf_size); + + err = wdt87xx_i2c_txdata(client, xfer_buffer, data_len + buf_size); + + if (err < 0) { + dev_err(&client->dev, "error no: (%d)\n", err); + return err; + } + + mdelay(2); + + return 0; +} + +static int wdt87xx_get_feature(struct i2c_client *client, char *buf, + unsigned int buf_size) +{ + int err = 0; + char tx_buffer[8]; + char xfer_buffer[80]; + union req_data_un *req_data = (union req_data_un *) buf; + int data_len = 0; + unsigned int xfer_length = 0; + + if (buf_size > 64) + buf_size = 64; + + /* get feature command packet */ + tx_buffer[data_len++] = 0x22; + tx_buffer[data_len++] = 0x00; + if (req_data->defined_data.report_id > 0xF) { + tx_buffer[data_len++] = 0x30; + tx_buffer[data_len++] = 0x02; + tx_buffer[data_len++] = (req_data->defined_data.report_id); + } else { + tx_buffer[data_len++] = 0x30 | + (req_data->defined_data.report_id); + tx_buffer[data_len++] = 0x02; + } + tx_buffer[data_len++] = 0x23; + tx_buffer[data_len++] = 0x00; + + err = wdt87xx_i2c_txrxdata(client, tx_buffer, data_len, xfer_buffer, + buf_size + 2); + + if (err < 0) { + dev_err(&client->dev, "error no: (%d)\n", err); + return err; + } + + /* check size and copy the return data */ + xfer_length = (unsigned int) xfer_buffer[1]; + xfer_length = (xfer_length << 8) | xfer_buffer[0]; + + if (buf_size < xfer_length) + xfer_length = buf_size; + + memcpy(buf, &xfer_buffer[2], xfer_length); + + mdelay(2); + + return 0; +} + +static int wdt87xx_get_string(struct i2c_client *client, char str_idx, + char *buf, unsigned int buf_size) +{ + int err = 0; + char tx_buffer[8] = { 0x22, 0x00, 0x13, 0x0E, + 0x00, 0x23, 0x00, 0x00 }; + char xfer_buffer[80]; + unsigned int xfer_length; + + if (buf_size > 64) + buf_size = 64; + + tx_buffer[4] = str_idx; + + err = wdt87xx_i2c_txrxdata(client, tx_buffer, 7, xfer_buffer, + buf_size + 2); + + if (err < 0) { + dev_err(&client->dev, "error no: (%d)\n", err); + return err; + } + + if (xfer_buffer[1] != 0x03) { + dev_err(&client->dev, "error str id: (%d)\n", xfer_buffer[1]); + return -EBADRQC; + } + + xfer_length = xfer_buffer[0]; + + if (buf_size < xfer_length) + xfer_length = buf_size; + + memcpy(buf, &xfer_buffer[2], xfer_length); + + mdelay(2); + + return 0; +} + + +static int wdt87xx_send_command(struct i2c_client *client, int cmd, int value) +{ + union cmd_data_un cmd_data; + + /* set the command packet */ + cmd_data.defined_data.report_id = VND_REQ_WRITE; + cmd_data.defined_data.type = VND_SET_COMMAND_DATA; + cmd_data.defined_data.index = (unsigned short) cmd; + + switch (cmd) { + case VND_CMD_START: + case VND_CMD_STOP: + case VND_CMD_RESET: + /* mode selector */ + cmd_data.defined_data.length = (char) (value & 0xFF); + break; + case VND_CMD_SFLCK: + put_unaligned_le16(0xC39B, &cmd_data.buffer[3]); + break; + case VND_CMD_SFUNL: + put_unaligned_le16(0x95DA, &cmd_data.buffer[3]); + break; + case VND_CMD_ERASE: + case VND_SET_CHECKSUM_CALC: + case VND_SET_CHECKSUM_LENGTH: + put_unaligned_le32(value, &cmd_data.buffer[3]); + break; + default: + cmd_data.defined_data.report_id = 0; + dev_err(&client->dev, "Invalid command: (%d)", cmd); + return -EINVAL; + } + + return wdt87xx_set_feature(client, &cmd_data.buffer[0], + sizeof(cmd_data)); +} + +static int wdt87xx_write_data(struct i2c_client *client, + const char *data, unsigned int address, int length) +{ + unsigned int addr_start, data_len, packet_size; + int count = 0; + int err = 0; + union req_data_un req_data; + const char *source_data = 0; + + source_data = data; + data_len = length; + addr_start = address; + + /* address and length should be 4 bytes alignment */ + if ((addr_start & 0x3) != 0 || (data_len & 0x3) != 0) { + dev_err(&client->dev, "addr & len must be aligned %x, %x\n", + addr_start, data_len); + return -EFAULT; + } + + packet_size = PACKET_SIZE; + + req_data.defined_data.report_id = VND_REQ_WRITE; + req_data.defined_data.type = VND_SET_DATA; + + while (data_len) { + if (data_len < PACKET_SIZE) + packet_size = data_len; + + req_data.defined_data.index = packet_size; + req_data.defined_data.length = addr_start; + + memcpy(req_data.defined_data.data, source_data, packet_size); + + err = wdt87xx_set_feature(client, req_data.buffer, 64); + + if (err) + break; + + data_len = data_len - packet_size; + source_data = source_data + packet_size; + addr_start = addr_start + packet_size; + + count++; + + mdelay(4); + + if ((count % 64) == 0) { + count = 0; + dev_dbg(&client->dev, "#"); + } + } + + dev_dbg(&client->dev, "#\n"); + + return err; +} + +static unsigned short misr(unsigned short currentValue, + unsigned char newValue) +{ + unsigned int a, b; + unsigned int bit0; + unsigned int y; + + a = currentValue; + b = newValue; + bit0 = a^(b&1); + bit0 ^= a>>1; + bit0 ^= a>>2; + bit0 ^= a>>4; + bit0 ^= a>>5; + bit0 ^= a>>7; + bit0 ^= a>>11; + bit0 ^= a>>15; + y = (a<<1)^b; + y = (y&~1) | (bit0&1); + + return (unsigned short) y; +} + +static int wdt87xx_get_checksum(struct i2c_client *client, + unsigned int *checksum, unsigned int address, int length) +{ + int err = 0; + int time_delay = 0; + union req_data_un req_data; + union cmd_data_un cmd_data; + + err = wdt87xx_send_command(client, VND_SET_CHECKSUM_LENGTH, length); + if (err) { + dev_err(&client->dev, "set checksum length fail (%d)\n", err); + return err; + } + + err = wdt87xx_send_command(client, VND_SET_CHECKSUM_CALC, address); + if (err) { + dev_err(&client->dev, "calc checksum fail (%d)\n", err); + return err; + } + + time_delay = (length + 1023) / 1024; + /* to wait the operation compeletion */ + msleep(time_delay * 10); + + cmd_data.defined_data.report_id = VND_REQ_READ; + cmd_data.defined_data.type = VND_GET_CHECKSUM; + cmd_data.defined_data.index = 0; + cmd_data.defined_data.length = 0; + + err = wdt87xx_set_feature(client, cmd_data.buffer, 8); + if (err) { + dev_err(&client->dev, "checksum set read fail (%d)\n", err); + return err; + } + + memset(req_data.buffer, 0, 64); + req_data.defined_data.report_id = VND_READ_DATA; + err = wdt87xx_get_feature(client, req_data.buffer, 64); + if (err) { + dev_err(&client->dev, "read checksum fail (%d)\n", err); + return err; + } + + *checksum = (req_data.buffer[9] << 8) | (req_data.buffer[8]); + + return err; +} + +static unsigned short fw_checksum(const unsigned char *data, + unsigned int length) +{ + unsigned int i; + unsigned short checksum = 0; + + checksum = 0x0000; + + for (i = 0; i < length; i++) + checksum = misr(checksum, data[i]); + + return checksum; +} + +static int wdt87xx_write_firmware(struct i2c_client *client, + struct chunk_info_ex_st *chunk_info_ex, int type) +{ + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); + int err = 0; + int err1 = 0; + int size; + int start_addr = 0; + int page_size; + int retry_count = 0; + int is_equal = 0; + int max_retries; + unsigned int calc_checksum = 0; + unsigned int read_checksum = 0; + const char *data; + + dev_info(&client->dev, "start 4k page program\n"); + + err = wdt87xx_send_command(client, VND_CMD_STOP, MODE_STOP); + if (err) { + dev_err(&client->dev, "command stop fail (%d)\n", err); + return err; + } + + err = wdt87xx_send_command(client, VND_CMD_SFUNL, 0); + if (err) { + dev_err(&client->dev, "command sfunl fail (%d)\n", err); + goto write_fail; + } + + mdelay(10); + + start_addr = chunk_info_ex->chunk_info.target_start_addr; + size = chunk_info_ex->chunk_info.length; + data = chunk_info_ex->data; + + max_retries = dev_wdt87xx->max_retries; + + dev_info(&client->dev, "%x, %x, %d\n", start_addr, size, max_retries); + + while (size && !err) { + is_equal = 0; + if (size > PG_SIZE) { + page_size = PG_SIZE; + size = size - PG_SIZE; + } else { + page_size = size; + size = 0; + } + + for (retry_count = 0; retry_count < max_retries && !is_equal; + retry_count++) { + err = wdt87xx_send_command(client, VND_CMD_ERASE, + start_addr); + if (err) { + dev_err(&client->dev, "erase fail (%d)\n", + err); + break; + } + + msleep(50); + + err = wdt87xx_write_data(client, data, start_addr, + page_size); + if (err) { + dev_err(&client->dev, "write data fail (%d)\n", + err); + break; + } + + read_checksum = 0; + err = wdt87xx_get_checksum(client, &read_checksum, + start_addr, page_size); + if (err) + break; + + calc_checksum = fw_checksum(data, page_size); + + if (read_checksum == calc_checksum) + is_equal = 1; + else { + dev_err(&client->dev, "checksum fail: (%d)", + retry_count); + dev_err(&client->dev, ",(%d), (%d)\n", + read_checksum, calc_checksum); + } + } + + if (retry_count == MAX_RETRIES) { + dev_err(&client->dev, "write page fail\n"); + err = -EIO; + } + + start_addr = start_addr + page_size; + data = data + page_size; + dev_info(&client->dev, "%x, %x\n", start_addr, size); + } +write_fail: + err1 = wdt87xx_send_command(client, VND_CMD_SFLCK, 0); + if (err1) + dev_err(&client->dev, "command sflck fail (%d)\n", err1); + + mdelay(10); + + err1 = wdt87xx_send_command(client, VND_CMD_START, 0); + if (err1) + dev_err(&client->dev, "command start fail (%d)\n", err1); + + dev_info(&client->dev, "stop 4k page program : "); + + if (err || err1) + dev_info(&client->dev, "fail\n"); + else + dev_info(&client->dev, "pass\n"); + + if (err1) + return err1; + + return err; +} + +static int wdt87xx_sw_reset(struct i2c_client *client) +{ + int err = 0; + + dev_info(&client->dev, "reset device now\n"); + + err = wdt87xx_send_command(client, VND_CMD_RESET, 0); + if (err) { + dev_err(&client->dev, "command reset fail (%d)\n", err); + return err; + } + + msleep(100); + + return 0; +} + +static int wdt87xx_load_chunk(struct i2c_client *client, + const struct firmware *fw, + struct format_chunk_st *format_chunk, unsigned int ck_id) +{ + int err = 0; + struct chunk_info_ex_st chunk_info_ex; + + err = get_chunk_info(fw, ck_id, &chunk_info_ex, format_chunk); + if (err) { + dev_err(&client->dev, "can not get the fw !\n"); + goto failed; + } + + /* Check for incorrect bin file */ + err = wdt87xx_check_firmware(&chunk_info_ex, ck_id); + if (err) { + dev_err(&client->dev, "invalid chunk : (%d)\n", ck_id); + goto failed; + } + + err = wdt87xx_write_firmware(client, &chunk_info_ex, ck_id); + if (err) + dev_err(&client->dev, "write firmware failed : (%d)\n", + ck_id); + +failed: + return err; +} + +static int wdt87xx_load_fw(struct device *dev, const char *fn, int type) +{ + struct i2c_client *client = to_i2c_client(dev); + const struct firmware *fw = 0; + int err = 0; + struct format_chunk_st format_chunk; + + err = request_firmware(&fw, fn, dev); + if (err) { + dev_err(&client->dev, "unable to open firmware %s\n", fn); + return err; + } + + disable_irq(client->irq); + + err = process_fw_data(client, fw, &format_chunk); + if (err) { + dev_err(&client->dev, "bad fw file !\n"); + goto release_firmware; + } + + if (type & WDT87XX_FW) { + err = wdt87xx_load_chunk(client, fw, &format_chunk, + CHUNK_ID_FRWR); + if (err) { + dev_err(&client->dev, "load fw chunk failed !\n"); + goto release_firmware; + } + } + + if (type & WDT87XX_CFG) { + err = wdt87xx_load_chunk(client, fw, &format_chunk, + CHUNK_ID_CNFG); + if (err) { + dev_err(&client->dev, "load cfg chunk failed !\n"); + goto release_firmware; + } + } + + err = wdt87xx_sw_reset(client); + + if (err) + dev_err(&client->dev, "software reset failed !\n"); + +release_firmware: + enable_irq(client->irq); + + mdelay(10); + release_firmware(fw); + return err; +} + +static ssize_t wdt87xx_update_fw(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); + int err = 0; + int option = 0; + + if (count > 0) + option = buf[0] - '0'; + + dev_info(dev, "update option (%d)\n", option); + if (option < 1 || option > 3) { + dev_err(&client->dev, "option is not supported\n"); + return -1; + } + + err = mutex_lock_interruptible(&dev_wdt87xx->sysfs_mutex); + if (err) + return err; + + err = wdt87xx_load_fw(dev, WDT87XX_FW_NAME, option); + if (err) { + dev_err(&client->dev, "the firmware update failed(%d)\n", + err); + count = err; + } + + mutex_unlock(&dev_wdt87xx->sysfs_mutex); + + return count; +} + +static ssize_t wdt87xx_max_retries(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); + + int option = 0; + + if (count > 0) + option = buf[0] - '0'; + + dev_wdt87xx->max_retries = option; + dev_info(dev, "max retries (%d)\n", option); + + return count; +} + +static ssize_t wdt87xx_show_info(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct wdt87xx_ts_data *dev_wdt87xx = i2c_get_clientdata(client); + struct sys_param_st *sys_param = &dev_wdt87xx->sys_param; + + wdt87xx_get_sysparam(client, dev_wdt87xx); + + return scnprintf(buf, PAGE_SIZE, "%x,%x,%4x,%4x\n", sys_param->fw_id, + sys_param->plat_id, sys_param->xmls_id1, + sys_param->xmls_id2); +} + +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, wdt87xx_update_fw); +static DEVICE_ATTR(max_retries, S_IWUSR, NULL, wdt87xx_max_retries); +static DEVICE_ATTR(show_info, S_IRUGO, wdt87xx_show_info, NULL); + +static struct attribute *wdt87xx_attrs[] = { + &dev_attr_update_fw.attr, + &dev_attr_max_retries.attr, + &dev_attr_show_info.attr, + NULL +}; + +static const struct attribute_group wdt87xx_attr_group = { + .attrs = wdt87xx_attrs, +}; + +static int wdt87xx_i2c_txrxdata(struct i2c_client *client, char *txdata, + int txlen, char *rxdata, int rxlen) +{ + int err = 0; + + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = txlen, + .buf = txdata, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = rxlen, + .buf = rxdata, + }, + }; + + err = i2c_transfer(client->adapter, msgs, 2); + + if (err < 0) + dev_err(&client->dev, "%s: i2c read error (%d)\n", + __func__, err); + + return err; +} + +static int wdt87xx_i2c_rxdata(struct i2c_client *client, char *rxdata, + int length) +{ + int err = 0; + + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = length, + .buf = rxdata, + }, + }; + + err = i2c_transfer(client->adapter, msgs, 1); + + if (err < 0) + dev_err(&client->dev, "%s: i2c read error (%d)\n", + __func__, err); + + return err; +} + +static int wdt87xx_i2c_txdata(struct i2c_client *client, char *txdata, + int length) +{ + int err = 0; + + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = length, + .buf = txdata, + }, + }; + + err = i2c_transfer(client->adapter, msg, 1); + if (err < 0) + dev_err(&client->dev, "%s: i2c write error (%d)\n", + __func__, err); + + return err; +} + +static void wdt87xx_ts_handle_irq(struct wdt87xx_ts_data *data) +{ + struct wdt87xx_ts_data *dev_wdt87xx = data; + int err = 0; + int i, points; + struct i2c_client *client = dev_wdt87xx->client; + struct wdt_touch_events_st *ptr_touch_event = 0; + u8 raw_buf[64] = {0}; + + static u8 points_last_flag[WDT_MAX_POINT<<1] = {0}; + + err = wdt87xx_i2c_rxdata(client, raw_buf, WDT_RAW_BUF_COUNT); + + if (err < 0) { + dev_err(&client->dev, "read raw data fail (%d)\n", err); + return; + } + + /* touch finger count */ + points = raw_buf[53]; + + dev_dbg(&client->dev, "point: (%d)\n", points); + + if (points == 0) { + for (i = 0; i < WDT_MAX_POINT; i++) { + /* force to send event of tip off */ + if (points_last_flag[i] != 0) { + dev_dbg(&client->dev, "tip off (%d)\n", i); + input_mt_slot(dev_wdt87xx->input_dev, i); + input_mt_report_slot_state( + dev_wdt87xx->input_dev, + MT_TOOL_FINGER, false); + } + } + + memset(points_last_flag, 0, sizeof(points_last_flag)); + + input_sync(dev_wdt87xx->input_dev); + return; + } + + ptr_touch_event = (struct wdt_touch_events_st *) raw_buf; + + dev_dbg(&client->dev, "+++++++++\n"); + + for (i = 0; i < WDT_MAX_POINT; i++) { + int point_id = (ptr_touch_event->touch_event[i].id >> 3) - 1; + + if (point_id < 0) + continue; + + /* tip off */ + if (((ptr_touch_event->touch_event[i].id & 0x1) == 0) && + (points_last_flag[point_id] != 0)) { + dev_dbg(&client->dev, "tip on (%d)\n", point_id); + input_mt_slot(dev_wdt87xx->input_dev, point_id); + input_mt_report_slot_state(dev_wdt87xx->input_dev, + MT_TOOL_FINGER, false); + } else /* tip on */ + if (ptr_touch_event->touch_event[i].id & 0x1) { + unsigned int point_x, point_y; + + /* incorrect coordinate */ + if (ptr_touch_event->touch_event[i].x > 0x7FFF || + ptr_touch_event->touch_event[i].y > 0x7FFF) + continue; + + point_x = ptr_touch_event->touch_event[i].x; + point_y = ptr_touch_event->touch_event[i].y; + + dev_dbg(&client->dev, "tip on (%d), x(%d), y(%d)\n", + i, point_x, point_y); + + input_mt_slot(dev_wdt87xx->input_dev, point_id); + input_mt_report_slot_state(dev_wdt87xx->input_dev, + MT_TOOL_FINGER, true); + input_report_abs(dev_wdt87xx->input_dev, + ABS_MT_TOUCH_MAJOR, 1); + input_report_abs(dev_wdt87xx->input_dev, + ABS_MT_POSITION_X, point_x); + input_report_abs(dev_wdt87xx->input_dev, + ABS_MT_POSITION_Y, point_y); + } + points_last_flag[point_id] = + (ptr_touch_event->touch_event[i].id & 0x1); + } + + input_sync(dev_wdt87xx->input_dev); +} + +static irqreturn_t wdt87xx_ts_interrupt(int irq, void *dev_id) +{ + struct wdt87xx_ts_data *dev_wdt87xx = + (struct wdt87xx_ts_data *) dev_id; + + wdt87xx_ts_handle_irq(dev_wdt87xx); + + return IRQ_HANDLED; +} + +static int wdt87xx_ts_request_irq(struct i2c_client *client) +{ + int err = 0; + struct wdt87xx_ts_data *dev_wdt87xx; + + dev_wdt87xx = (struct wdt87xx_ts_data *) i2c_get_clientdata(client); + +/* + * once using the ACPI, we shall get the irq number from the client + * if it is not in the ACPI, we shall get a irq number from the gpio + */ +#ifndef CONFIG_ACPI + client->irq = 0; + + /* request a selected gpio */ + err = gpio_request(DINT_GPIO_NUM, "GPIO DINT"); + if (err < 0) { + dev_err(&client->dev, "%s: request gpio fail (%d)\n", + __func__, err); + return -EINVAL; + } + + /* request a irq no */ + client->irq = gpio_to_irq(DINT_GPIO_NUM); + if (client->irq < 0) { + dev_err(&client->dev, "%s: request irq fail (%d)\n", + __func__, client->irq); + return -EINVAL; + } + + gpio_direction_input(DINT_GPIO_NUM); + gpio_set_value(DINT_GPIO_NUM, 1); +#endif + + irq_set_irq_type(client->irq, IRQ_TYPE_EDGE_FALLING); + + err = request_threaded_irq(client->irq, NULL, wdt87xx_ts_interrupt, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->name, dev_wdt87xx); + + if (err < 0) { + dev_err(&client->dev, "%s: request threaded irq fail (%d)\n", + __func__, err); + return err; + } + + disable_irq_nosync(client->irq); + + return 0; +} + +static int wdt87xx_ts_create_input_device(struct i2c_client *client) +{ + int err = 0; + struct wdt87xx_ts_data *dev_wdt87xx; + struct input_dev *input_dev; + + dev_wdt87xx = (struct wdt87xx_ts_data *) i2c_get_clientdata(client); + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&client->dev, "%s: failed to allocate input device\n", + __func__); + return -ENOMEM; + } + + dev_wdt87xx->input_dev = input_dev; + + input_dev->name = "WDT87xx Touchscreen"; + input_dev->id.bustype = BUS_I2C; + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + + /* for single touch */ + set_bit(ABS_X, input_dev->absbit); + set_bit(ABS_Y, input_dev->absbit); + input_set_abs_params(input_dev, ABS_X, 0, SCREEN_LOGICAL_MAX_X, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, SCREEN_LOGICAL_MAX_Y, 0, 0); + input_abs_set_res(input_dev, ABS_X, WDT_UNITS_PER_MM); + input_abs_set_res(input_dev, ABS_Y, WDT_UNITS_PER_MM); + + input_mt_init_slots(input_dev, WDT_MAX_POINT, INPUT_MT_DIRECT); + + set_bit(ABS_MT_TOUCH_MAJOR, input_dev->absbit); + set_bit(ABS_MT_POSITION_X, input_dev->absbit); + set_bit(ABS_MT_POSITION_Y, input_dev->absbit); + set_bit(ABS_MT_WIDTH_MAJOR, input_dev->absbit); + + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, + SCREEN_LOGICAL_MAX_X, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, + SCREEN_LOGICAL_MAX_Y, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 0xFF, 0, 0); + input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 200, 0, 0); + input_abs_set_res(input_dev, ABS_MT_POSITION_X, WDT_UNITS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_Y, WDT_UNITS_PER_MM); + + set_bit(ABS_PRESSURE, input_dev->absbit); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xFF, 0, 0); + + input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0, + WDT_MAX_POINT, 0, 0); + + set_bit(EV_ABS, input_dev->evbit); + set_bit(EV_SYN, input_dev->evbit); + + err = input_register_device(input_dev); + if (err) { + dev_err(&client->dev, "register input device fail (%d)\n", + err); + return err; + } + + return 0; +} + +static int wdt87xx_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct wdt87xx_ts_data *dev_wdt87xx; + int err = 0; + + dev_dbg(&client->dev, "wdt87xx : adapter=(%d), client irq:(%d)\n", + client->adapter->nr, client->irq); + + /* check if the I2C function is ok in this adaptor */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + err = -ENODEV; + goto exit_check_functionality_fail; + } + + dev_dbg(&client->dev, "kzalloc\n"); + dev_wdt87xx = (struct wdt87xx_ts_data *) + kzalloc(sizeof(struct wdt87xx_ts_data), GFP_KERNEL); + if (!dev_wdt87xx) { + err = -ENOMEM; + goto exit_alloc_data_fail; + } + + dev_dbg(&client->dev, "i2c_set_clientdata\n"); + + dev_wdt87xx->client = client; + mutex_init(&dev_wdt87xx->sysfs_mutex); + i2c_set_clientdata(client, dev_wdt87xx); + dev_wdt87xx->max_retries = MAX_RETRIES; + + dev_dbg(&client->dev, "wdt87xx_ts_request_irq\n"); + err = wdt87xx_ts_request_irq(client); + if (err < 0) { + dev_err(&client->dev, "request irq fail (%d)\n", err); + goto exit_gpio_request_fail; + } + + dev_dbg(&client->dev, "wdt87xx_ts_create_input_device\n"); + err = wdt87xx_ts_create_input_device(client); + if (err < 0) { + dev_err(&client->dev, "create input device fail (%d)\n", err); + goto exit_input_register_device_fail; + } + + dev_dbg(&client->dev, "sysfs_create_group\n"); + err = sysfs_create_group(&client->dev.kobj, &wdt87xx_attr_group); + if (err) { + dev_err(&client->dev, "create sysfs fail (%d)\n", err); + goto err_free_object; + } + + enable_irq(client->irq); + + dev_dbg(&client->dev, "%s leave\n", __func__); + + return 0; + +err_free_object: +exit_input_register_device_fail: + input_free_device(dev_wdt87xx->input_dev); + + +exit_gpio_request_fail: +#ifndef CONFIG_ACPI + gpio_free(DINT_GPIO_NUM); +#endif + if (client->irq) + free_irq(client->irq, dev_wdt87xx); + + i2c_set_clientdata(client, NULL); + + kfree(dev_wdt87xx); +exit_alloc_data_fail: +exit_check_functionality_fail: + + return err; +} + +static int wdt87xx_ts_remove(struct i2c_client *client) +{ + struct wdt87xx_ts_data *dev_wdt87xx = + (struct wdt87xx_ts_data *) i2c_get_clientdata(client); + + dev_dbg(&client->dev, "==%s==\n", __func__); + + sysfs_remove_group(&client->dev.kobj, &wdt87xx_attr_group); + + input_unregister_device(dev_wdt87xx->input_dev); + input_free_device(dev_wdt87xx->input_dev); + +#ifndef CONFIG_ACPI + gpio_free(DINT_GPIO_NUM); +#endif + + if (client->irq) + free_irq(client->irq, dev_wdt87xx); + + i2c_set_clientdata(client, NULL); + kfree(dev_wdt87xx); + + return 0; +} + +static int __maybe_unused wdt87xx_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + int err = 0; + + dev_dbg(&client->dev, "enter %s\n", __func__); + + disable_irq(client->irq); + + err = wdt87xx_send_command(client, VND_CMD_STOP, MODE_IDLE); + if (err) + dev_err(&client->dev, "%s: command stop fail (%d)\n", + __func__, err); + + return err; +} + +static int __maybe_unused wdt87xx_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + int err = 0; + + /* once the chip is reset before resume, */ + /* we need some time to wait it is stable */ + mdelay(100); + + err = wdt87xx_send_command(client, VND_CMD_START, 0); + if (err) + dev_err(&client->dev, "%s: command start fail (%d)\n", + __func__, err); + + enable_irq(client->irq); + + dev_dbg(&client->dev, "leave %s\n", __func__); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(wdt87xx_pm_ops, wdt87xx_suspend, wdt87xx_resume); + +static const struct i2c_device_id wdt87xx_dev_id[] = { + { WDT87XX_NAME, 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, wdt87xx_dev_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id wdt87xx_acpi_id[] = { + { "WDHT0001", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(acpi, wdt87xx_acpi_id); +#endif + +static struct i2c_driver wdt87xx_driver = { + .probe = wdt87xx_ts_probe, + .remove = wdt87xx_ts_remove, + .id_table = wdt87xx_dev_id, + .driver = { + .name = WDT87XX_NAME, + .owner = THIS_MODULE, + .pm = &wdt87xx_pm_ops, +#ifdef CONFIG_ACPI + .acpi_match_table = ACPI_PTR(wdt87xx_acpi_id), +#endif + }, +}; + +module_i2c_driver(wdt87xx_driver); + +MODULE_AUTHOR("HN Chen <hn.chen@weidahitech.com>"); +MODULE_DESCRIPTION("WeidaHiTech WDT87XX Touchscreen driver"); +MODULE_VERSION(WDT87XX_DRV_VER); +MODULE_LICENSE("GPL"); +
Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> --- drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/wdt87xx_i2c.c | 1501 +++++++++++++++++++++++++++++++ 3 files changed, 1514 insertions(+) create mode 100644 drivers/input/touchscreen/wdt87xx_i2c.c