From patchwork Sun May 17 16:27:41 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 6424351 Return-Path: X-Original-To: patchwork-linux-input@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id B03DF9F1CC for ; Sun, 17 May 2015 16:28:37 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 2CE90205FA for ; Sun, 17 May 2015 16:28:36 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 6DFEF205FC for ; Sun, 17 May 2015 16:28:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751523AbbEQQ2a (ORCPT ); Sun, 17 May 2015 12:28:30 -0400 Received: from mail-pd0-f176.google.com ([209.85.192.176]:33858 "EHLO mail-pd0-f176.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750775AbbEQQ22 (ORCPT ); Sun, 17 May 2015 12:28:28 -0400 Received: by pdbnk13 with SMTP id nk13so16079544pdb.1; Sun, 17 May 2015 09:28:27 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=KlLzb3LpWnPyXs1pfZ9LRGr2EODNZrACJDSB8oYFC2o=; b=rLsjSuDqAFX3ZlS2hn+PmspKONzKMH1s6PnhbKzSyP7HAquCX3CnNfAnHa/zym0hiU ANlVRXIDBrz1Tl51EtMbjZG1enQl48M5XxCzD5FKUKHn8gUOvrr8k9BhbtgcBJN4LykC 6IXakEVjeZJeVpXCikS9hAWKinzV5ZTnTWn/BUE0GKNhB0kGbAjUePIr5VRQzVun7X/8 +l/lm9auM4nOUA2uU9ip0QRX0DnsMoxilkjKHASioVxdZy/K4JWTH4AN4ONfyM8CmD1b 8QtYaAVNQzz50esPGv4RBE8r6apXMZdjybqyx/lfXQKZOx+Dzcr502yZY2xaLcUno0/w 8v3Q== X-Received: by 10.67.4.161 with SMTP id cf1mr36914449pad.35.1431880107716; Sun, 17 May 2015 09:28:27 -0700 (PDT) Received: from fangorn.rup.mentorg.com (nat-min.mentorg.com. [139.181.32.34]) by mx.google.com with ESMTPSA id pw9sm7574264pac.27.2015.05.17.09.28.21 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Sun, 17 May 2015 09:28:26 -0700 (PDT) From: Dmitry Eremin-Solenikov To: Russell King , Daniel Mack , Robert Jarzmik , Linus Walleij , Alexandre Courbot , Wolfram Sang , Dmitry Torokhov , Bryan Wu , Richard Purdie , Samuel Ortiz , Lee Jones , Mark Brown , Jingoo Han , Jean-Christophe Plagniol-Villard , Tomi Valkeinen , Liam Girdwood , Andrea Adami Cc: linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org, linux-spi@vger.kernel.org, linux-fbdev@vger.kernel.org, alsa-devel@alsa-project.org Subject: [PATCH v3 01/17] mfd: add new driver for Sharp LoCoMo Date: Sun, 17 May 2015 19:27:41 +0300 Message-Id: <1431880077-26321-2-git-send-email-dbaryshkov@gmail.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1431880077-26321-1-git-send-email-dbaryshkov@gmail.com> References: <1431880077-26321-1-git-send-email-dbaryshkov@gmail.com> Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Spam-Status: No, score=-4.0 required=5.0 tests=BAYES_00, DKIM_ADSP_CUSTOM_MED, DKIM_SIGNED, FREEMAIL_FROM, FUZZY_XPILL, RCVD_IN_DNSWL_HI, T_DKIM_INVALID, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP LoCoMo is a GA used on Sharp Zaurus SL-5x00. Current driver does has several design issues (special bus instead of platform bus, doesn't use mfd-core, etc). Implement 'core' parts of locomo support as an mfd driver. Signed-off-by: Dmitry Eremin-Solenikov --- drivers/mfd/Kconfig | 10 ++ drivers/mfd/Makefile | 1 + drivers/mfd/locomo.c | 346 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/locomo.h | 167 ++++++++++++++++++++++ 4 files changed, 524 insertions(+) create mode 100644 drivers/mfd/locomo.c create mode 100644 include/linux/mfd/locomo.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d5ad04d..8c33940 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1430,6 +1430,16 @@ config MFD_STW481X in various ST Microelectronics and ST-Ericsson embedded Nomadik series. +config MFD_LOCOMO + bool "Sharp LoCoMo support" + depends on ARM + select MFD_CORE + select IRQ_DOMAIN + select REGMAP_MMIO + help + Support for Sharp LoCoMo Grid Array found in Sharp SL-5x00 + PDA family. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 0e5cfeb..6c23b73 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -181,6 +181,7 @@ obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o obj-$(CONFIG_MFD_DLN2) += dln2.o obj-$(CONFIG_MFD_RT5033) += rt5033.o obj-$(CONFIG_MFD_SKY81452) += sky81452.o +obj-$(CONFIG_MFD_LOCOMO) += locomo.o intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o diff --git a/drivers/mfd/locomo.c b/drivers/mfd/locomo.c new file mode 100644 index 0000000..313d12f --- /dev/null +++ b/drivers/mfd/locomo.c @@ -0,0 +1,346 @@ +/* + * Sharp LoCoMo support + * + * (C) Copyright 2015 Dmitry Eremin-Solenikov + * + * Based on old driver at arch/arm/common/locomo.c + * + * (C) Copyright 2004 John Lenz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains all generic LoCoMo support. + * + * All initialization functions provided here are intended to be called + * from machine specific code with proper arguments when required. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* LoCoMo Interrupts */ +#define IRQ_LOCOMO_KEY 0 +#define IRQ_LOCOMO_GPIO 1 +#define IRQ_LOCOMO_LT 2 +#define IRQ_LOCOMO_SPI 3 + +#define LOCOMO_NR_IRQS 4 + +/* the following is the overall data for the locomo chip */ +struct locomo { + struct device *dev; + unsigned int irq; + spinlock_t lock; + struct irq_domain *domain; + struct regmap *regmap; +}; + +static struct resource locomo_kbd_resources[] = { + DEFINE_RES_IRQ(IRQ_LOCOMO_KEY), +}; + +static struct resource locomo_gpio_resources[] = { + DEFINE_RES_IRQ(IRQ_LOCOMO_GPIO), +}; + +/* Filled in locomo_probe() function, will be kmemduped by platform core */ +static struct locomo_gpio_platform_data locomo_gpio_pdata; + +static struct resource locomo_lt_resources[] = { + DEFINE_RES_IRQ(IRQ_LOCOMO_LT), +}; + +static struct resource locomo_spi_resources[] = { + DEFINE_RES_IRQ(IRQ_LOCOMO_SPI), +}; + +/* Filled in locomo_probe() function, will be kmemduped by platform core */ +static struct locomo_lcd_platform_data locomo_lcd_pdata; + +static struct mfd_cell locomo_cells[] = { + { + .name = "locomo-kbd", + .resources = locomo_kbd_resources, + .num_resources = ARRAY_SIZE(locomo_kbd_resources), + }, + { + .name = "locomo-gpio", + .resources = locomo_gpio_resources, + .num_resources = ARRAY_SIZE(locomo_gpio_resources), + .platform_data = &locomo_gpio_pdata, + .pdata_size = sizeof(locomo_gpio_pdata), + }, + { + .name = "locomo-lt", /* Long time timer */ + .resources = locomo_lt_resources, + .num_resources = ARRAY_SIZE(locomo_lt_resources), + }, + { + .name = "locomo-spi", + .resources = locomo_spi_resources, + .num_resources = ARRAY_SIZE(locomo_spi_resources), + }, + { + .name = "locomo-led", + }, + { + .name = "locomo-backlight", + }, + { + .name = "locomo-lcd", + .platform_data = &locomo_lcd_pdata, + .pdata_size = sizeof(locomo_lcd_pdata), + }, + { + .name = "locomo-i2c", + }, +}; + +/* + * IRQ support + * + * ICR reg contains IRQ status at bits 9-12, IRQ mask at bits 4-7. + * Thus 0xf00 selects all triggered IRQ sources, and decrementing + * ffs result by 9 will get hardware IRQ number. + */ +static void locomo_handler(unsigned int irq, struct irq_desc *desc) +{ + struct locomo *ldev = irq_get_handler_data(irq); + struct irq_chip *irqchip = irq_desc_get_chip(desc); + unsigned int req; + + chained_irq_enter(irqchip, desc); + + /* Check why this interrupt was generated */ + while (1) { + regmap_read(ldev->regmap, LOCOMO_ICR, &req); + req &= 0x0f00; + + if (!req) + break; + + irq = ffs(req) - 9; + generic_handle_irq(irq_find_mapping(ldev->domain, irq)); + } + + chained_irq_exit(irqchip, desc); +} + +static void locomo_mask_irq(struct irq_data *d) +{ + struct locomo *ldev = irq_data_get_irq_chip_data(d); + unsigned int mask = 0x0010 << d->hwirq; + + regmap_update_bits(ldev->regmap, LOCOMO_ICR, mask, 0); +} + +static void locomo_unmask_irq(struct irq_data *d) +{ + struct locomo *ldev = irq_data_get_irq_chip_data(d); + unsigned int mask = 0x0010 << d->hwirq; + + regmap_update_bits(ldev->regmap, LOCOMO_ICR, mask, mask); +} + +static struct irq_chip locomo_chip = { + .name = "locomo", + .irq_mask = locomo_mask_irq, + .irq_unmask = locomo_unmask_irq, +}; + +static int locomo_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hwirq) +{ + struct locomo *locomo = d->host_data; + + irq_set_chip_data(virq, locomo); + irq_set_chip_and_handler(virq, &locomo_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +static void locomo_irq_unmap(struct irq_domain *d, unsigned int virq) +{ + set_irq_flags(virq, 0); + irq_set_chip_and_handler(virq, NULL, NULL); + irq_set_chip_data(virq, NULL); +} + +static struct irq_domain_ops locomo_irq_ops = { + .map = locomo_irq_map, + .unmap = locomo_irq_unmap, + .xlate = irq_domain_xlate_onecell, +}; + +static int locomo_setup_irq(struct locomo *ldev) +{ + ldev->domain = irq_domain_add_simple(NULL, LOCOMO_NR_IRQS, 0, + &locomo_irq_ops, ldev); + if (!ldev->domain) + return -ENOMEM; + + /* + * Install handler for IRQ_LOCOMO_HW. + */ + irq_set_irq_type(ldev->irq, IRQ_TYPE_EDGE_FALLING); + irq_set_handler_data(ldev->irq, ldev); + irq_set_chained_handler(ldev->irq, locomo_handler); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int locomo_suspend(struct device *dev) +{ + struct locomo *ldev = dev_get_drvdata(dev); + + /* audio */ + regmap_write(ldev->regmap, LOCOMO_PAIF, 0x00); + + /* + * Original code disabled the clock depending on leds settings + * However we disable leds before suspend, thus it's safe + * to just assume this setting. + */ + /* CLK32 off */ + regmap_write(ldev->regmap, LOCOMO_C32K, 0x00); + + /* 22MHz/24MHz clock off */ + regmap_write(ldev->regmap, LOCOMO_ACC, 0x00); + + return 0; +} + +static int locomo_resume(struct device *dev) +{ + struct locomo *ldev = dev_get_drvdata(dev); + + regmap_write(ldev->regmap, LOCOMO_C32K, 0x00); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(locomo_pm, locomo_suspend, locomo_resume); + +static const struct regmap_config locomo_regmap_config = { + .name = "LoCoMo", + .reg_bits = 8, + .reg_stride = 4, + .val_bits = 16, + .cache_type = REGCACHE_NONE, + .max_register = 0xec, +}; + +static int locomo_probe(struct platform_device *pdev) +{ + struct locomo_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct resource *res; + void __iomem *base; + struct locomo *ldev; + unsigned int rev; + int ret; + + ldev = devm_kzalloc(&pdev->dev, sizeof(*ldev), GFP_KERNEL); + if (!ldev) + return -ENOMEM; + + spin_lock_init(&ldev->lock); + ldev->dev = &pdev->dev; + + ldev->irq = platform_get_irq(pdev, 0); + if (ldev->irq < 0) + return ldev->irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + ldev->regmap = devm_regmap_init_mmio(&pdev->dev, base, + &locomo_regmap_config); + if (IS_ERR(ldev->regmap)) + return PTR_ERR(ldev->regmap); + + if (pdata) { + locomo_gpio_pdata.gpio_base = pdata->gpio_base; + locomo_lcd_pdata.comadj = pdata->comadj; + } else { + locomo_gpio_pdata.gpio_base = -1; + locomo_lcd_pdata.comadj = 128; + } + + platform_set_drvdata(pdev, ldev); + + regmap_read(ldev->regmap, LOCOMO_VER, &rev); + dev_info(&pdev->dev, "LoCoMo Chip: %04x\n", rev); + + /* Clear IRQ status and mask */ + regmap_write(ldev->regmap, LOCOMO_ICR, 0); + + /* Longtime timer */ + regmap_write(ldev->regmap, LOCOMO_LTINT, 0); + + ret = locomo_setup_irq(ldev); + if (ret) + return ret; + + ret = mfd_add_devices(&pdev->dev, pdev->id, + locomo_cells, ARRAY_SIZE(locomo_cells), + res, -1, ldev->domain); + if (ret) + goto err; + + return 0; + +err: + irq_set_chained_handler(ldev->irq, NULL); + irq_set_handler_data(ldev->irq, NULL); + + irq_domain_remove(ldev->domain); + + return ret; +} + +static int locomo_remove(struct platform_device *dev) +{ + struct locomo *ldev = platform_get_drvdata(dev); + + mfd_remove_devices(&dev->dev); + + irq_set_chained_handler(ldev->irq, NULL); + irq_set_handler_data(ldev->irq, NULL); + + irq_domain_remove(ldev->domain); + + return 0; +} + +static struct platform_driver locomo_device_driver = { + .probe = locomo_probe, + .remove = locomo_remove, + .driver = { + .name = "locomo", + .pm = &locomo_pm, + }, +}; + +module_platform_driver(locomo_device_driver); + +MODULE_DESCRIPTION("Sharp LoCoMo core driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("John Lenz "); +MODULE_ALIAS("platform:locomo"); diff --git a/include/linux/mfd/locomo.h b/include/linux/mfd/locomo.h new file mode 100644 index 0000000..bbbce37 --- /dev/null +++ b/include/linux/mfd/locomo.h @@ -0,0 +1,167 @@ +/* + * This file contains the definitions for the LoCoMo G/A Chip + * + * (C) Copyright 2015 Dmitry Eremin-Solenikov + * (C) Copyright 2004 John Lenz + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Based on sa1111.h + */ + +#ifndef _ASM_ARCH_LOCOMO +#define _ASM_ARCH_LOCOMO + +/* LOCOMO chip version */ +#define LOCOMO_VER 0x00 + +/* Pin status */ +#define LOCOMO_ST 0x04 + +/* Pin status */ +#define LOCOMO_C32K 0x08 + +/* Interrupt controller */ +#define LOCOMO_ICR 0x0C + +/* Touch panel controller */ +#define LOCOMO_ASD 0x20 /* AD start delay */ +#define LOCOMO_HSD 0x28 /* HSYS delay */ +#define LOCOMO_HSC 0x2c /* HSYS period */ +#define LOCOMO_TADC 0x30 /* tablet ADC clock */ + +/* Backlight controller: TFT signal */ +#define LOCOMO_TC 0x38 /* TFT control signal */ +#define LOCOMO_CPSD 0x3c /* CPS delay */ + +/* Keyboard controller */ +#define LOCOMO_KIB 0x40 /* KIB level */ +#define LOCOMO_KSC 0x44 /* KSTRB control */ +#define LOCOMO_KCMD 0x48 /* KSTRB command */ +#define LOCOMO_KIC 0x4c /* Key interrupt */ + +/* Audio clock */ +#define LOCOMO_ACC 0x54 /* Audio clock */ +#define LOCOMO_ACC_XON 0x80 +#define LOCOMO_ACC_XEN 0x40 +#define LOCOMO_ACC_XSEL0 0x00 +#define LOCOMO_ACC_XSEL1 0x20 +#define LOCOMO_ACC_MCLKEN 0x10 +#define LOCOMO_ACC_64FSEN 0x08 +#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */ +#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */ +#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */ +#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */ +#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */ +#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */ + +/* SPI interface */ +#define LOCOMO_SPIMD 0x60 /* SPI mode setting */ +#define LOCOMO_SPIMD_LOOPBACK BIT(15) /* loopback tx to rx */ +#define LOCOMO_SPIMD_MSB1ST BIT(14) /* send MSB first */ +#define LOCOMO_SPIMD_DOSTAT BIT(13) /* transmit line is idle high */ +#define LOCOMO_SPIMD_TCPOL BIT(11) /* transmit CPOL (maybe affects CPHA) */ +#define LOCOMO_SPIMD_RCPOL BIT(10) /* receive CPOL (maybe affects CPHA) */ +#define LOCOMO_SPIMD_TDINV BIT(9) /* invert transmit line */ +#define LOCOMO_SPIMD_RDINV BIT(8) /* invert receive line */ +#define LOCOMO_SPIMD_XON BIT(7) /* enable spi controller clock */ +#define LOCOMO_SPIMD_XEN BIT(6) /* clock bit write enable */ +#define LOCOMO_SPIMD_XSEL 0x0018 /* clock select */ +/* xon must be off when enabling xen, wait 300 us before xon -> 1 */ +#define CLOCK_18MHZ 0 /* 18,432 MHz clock */ +#define CLOCK_22MHZ 1 /* 22,5792 MHz clock */ +#define CLOCK_25MHZ 2 /* 24,576 MHz clock */ +#define LOCOMO_SPIMD_CLKSEL 0x7 +#define DIV_1 0 /* don't divide clock */ +#define DIV_2 1 /* divide clock by two */ +#define DIV_4 2 /* divide clock by four */ +#define DIV_8 3 /* divide clock by eight */ +#define DIV_64 4 /* divide clock by 64 */ + +#define LOCOMO_SPICT 0x64 /* SPI mode control */ +#define LOCOMO_SPICT_CRC16_7_B BIT(15) /* 0: crc16 1: crc7 */ +#define LOCOMO_SPICT_CRCRX_TX_B BIT(14) +#define LOCOMO_SPICT_CRCRESET_B BIT(13) +#define LOCOMO_SPICT_CEN BIT(7) /* ?? enable */ +#define LOCOMO_SPICT_CS BIT(6) /* chip select */ +#define LOCOMO_SPICT_UNIT16 BIT(5) /* 0: 8 bit, 1: 16 bit*/ +#define LOCOMO_SPICT_ALIGNEN BIT(2) /* align transfer enable */ +#define LOCOMO_SPICT_RXWEN BIT(1) /* continuous receive */ +#define LOCOMO_SPICT_RXUEN BIT(0) /* aligned receive */ + +#define LOCOMO_SPIST 0x68 /* SPI status */ +#define LOCOMO_SPI_TEND BIT(3) /* Transfer end bit */ +#define LOCOMO_SPI_REND BIT(2) /* Receive end bit */ +#define LOCOMO_SPI_RFW BIT(1) /* write buffer bit */ +#define LOCOMO_SPI_RFR BIT(0) /* read buffer bit */ + +#define LOCOMO_SPIIS 0x70 /* SPI interrupt status */ +#define LOCOMO_SPIWE 0x74 /* SPI interrupt status write enable */ +#define LOCOMO_SPIIE 0x78 /* SPI interrupt enable */ +#define LOCOMO_SPIIR 0x7c /* SPI interrupt request */ +#define LOCOMO_SPITD 0x80 /* SPI transfer data write */ +#define LOCOMO_SPIRD 0x84 /* SPI receive data read */ +#define LOCOMO_SPITS 0x88 /* SPI transfer data shift */ +#define LOCOMO_SPIRS 0x8C /* SPI receive data shift */ + +/* GPIO */ +#define LOCOMO_GPD 0x90 /* GPIO direction */ +#define LOCOMO_GPE 0x94 /* GPIO input enable */ +#define LOCOMO_GPL 0x98 /* GPIO level */ +#define LOCOMO_GPO 0x9c /* GPIO out data setting */ +#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */ +#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */ +#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */ +#define LOCOMO_GWE 0xac /* GPIO status write enable */ +#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */ +#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */ + +/* Front light adjustment controller */ +#define LOCOMO_ALS 0xc8 /* Adjust light cycle */ +#define LOCOMO_ALS_EN 0x8000 +#define LOCOMO_ALD 0xcc /* Adjust light duty */ + +/* PCM audio interface */ +#define LOCOMO_PAIF 0xd0 /* PCM audio interface */ +#define LOCOMO_PAIF_SCINV 0x20 +#define LOCOMO_PAIF_SCEN 0x10 +#define LOCOMO_PAIF_LRCRST 0x08 +#define LOCOMO_PAIF_LRCEVE 0x04 +#define LOCOMO_PAIF_LRCINV 0x02 +#define LOCOMO_PAIF_LRCEN 0x01 + +/* Long time timer */ +#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */ +#define LOCOMO_LTINT 0xdc /* LTC interrupt */ + +/* DAC control signal for LCD (COMADJ ) */ +#define LOCOMO_DAC 0xe0 +/* DAC control */ +#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */ +#define LOCOMO_DAC_TEST 0x04 /* Test bit */ +#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */ +#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */ + +/* LED controller */ +#define LOCOMO_LPT0 0xe8 +#define LOCOMO_LPT1 0xec +#define LOCOMO_LPT_TOFH 0x80 +#define LOCOMO_LPT_TOFL 0x08 +#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4) +#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7)) + +struct locomo_gpio_platform_data { + unsigned int gpio_base; +}; + +struct locomo_lcd_platform_data { + u8 comadj; +}; + +struct locomo_platform_data { + unsigned int gpio_base; + u8 comadj; +}; + +#endif