@@ -222,6 +222,16 @@ config INPUT_APANEL
To compile this driver as a module, choose M here: the module will
be called apanel.
+config INPUT_EVIFPANEL
+ tristate "Uniwest EVI Front panel"
+ select SERIO
+ help
+ Say Y if you have a Uniwest EVI and want to enable the
+ sliders and buttons on the front.
+
+ To compile this driver as a module, choose M here: the
+ module will be called evifpanel.
+
config INPUT_GP2A
tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
depends on I2C
@@ -28,6 +28,7 @@ obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o
obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
+obj-$(CONFIG_INPUT_EVIFPANEL) += evifpanel.o
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
new file mode 100644
@@ -0,0 +1,265 @@
+/*
+ * Uniwest EVI Front Panel driver
+ *
+ * Copyright 2015 United Western Technologies
+ *
+ * Joshua Clayton <stillcompiling@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ */
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+
+#define DRIVER_DESC "Uniwest EVI Frontpanel input driver"
+MODULE_AUTHOR("Joshua Clayton <stillcompiling@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+struct evifpanel {
+ struct input_dev *dev;
+ struct serio *serio;
+ unsigned int bytes;
+ char name[64];
+ char phys[32];
+ unsigned char buf[8];
+};
+
+struct key_map {
+ u16 type;
+ u16 code;
+ s32 value;
+ unsigned int byte;
+ unsigned int offset;
+};
+
+static struct key_map btns[] = {
+ { EV_KEY, KEY_F1, 1, 6, 0 },
+ { EV_KEY, KEY_D, 1, 6, 1 },
+ { EV_KEY, KEY_N, 1, 7, 0 },
+ { EV_KEY, KEY_BACKSPACE, 1, 7, 1 },
+ { EV_KEY, KEY_ENTER, 1, 7, 2 },
+ { EV_KEY, KEY_ESC, 1, 7, 3 },
+ { EV_KEY, KEY_F4, 1, 7, 4 },
+ { EV_KEY, KEY_F3, 1, 7, 5 },
+ { EV_KEY, KEY_F2, 1, 7, 6 },
+ { },
+};
+
+static void fp_check_key(struct evifpanel *fp, struct key_map *key)
+{
+ s32 value = fp->buf[key->byte] & BIT(key->offset);
+
+ input_report_key(fp->dev, key->code, value);
+}
+
+/*
+ * Check buttons against array of key_map
+ */
+static void fp_check_btns(struct evifpanel *fp, struct key_map *key)
+{
+ while (key->type) {
+ switch (key->type) {
+ case EV_KEY:
+ fp_check_key(fp, key);
+ break;
+ default:
+ break; /* ignore unknown types */
+ }
+ key++;
+ }
+
+ input_sync(fp->dev);
+}
+
+/*
+ * Set the firmware version coming from the fp in an ascii file
+ */
+static void fp_set_fw_ver(struct evifpanel *fp)
+{
+ scnprintf(fp->serio->firmware_id, sizeof(fp->serio->firmware_id),
+ "evifpanel v%3.3u.%3.3u.%3.3u.%3.3u", fp->buf[4],
+ fp->buf[5], fp->buf[6], fp->buf[7]);
+
+ dev_info(&fp->serio->dev, "firmware found: %s\n",
+ fp->serio->firmware_id);
+}
+
+/*
+ * Request firmware version info from the device
+ */
+static void fp_request_fw_ver(struct evifpanel *fp)
+{
+ serio_write(fp->serio, '\xC0');
+ serio_write(fp->serio, '\x00');
+ serio_write(fp->serio, '\x00');
+ serio_write(fp->serio, '\x09');
+ serio_write(fp->serio, '\x00');
+ serio_write(fp->serio, '\x01');
+ serio_write(fp->serio, '\x00');
+ serio_write(fp->serio, '\x00');
+}
+
+/*
+ * Send zero or more input events based on the state of the fp
+ * Call this when you have a full packet.
+ */
+static int fp_parse_buf(struct evifpanel *fp)
+{
+ switch (fp->buf[1]) {
+ case '\x03':
+ fp_check_btns(fp, btns);
+ break;
+ case '\x09':
+ if (fp->buf[4] || fp->buf[5])
+ fp_set_fw_ver(fp);
+ break;
+ default:
+ dev_err(&fp->dev->dev, "Bad cmd id %X in sequence %llX\n",
+ fp->buf[1], *(u64 *)(fp->buf));
+
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void fp_add_byte(struct evifpanel *fp, unsigned char c)
+{
+ if (c != '\xC0' && !fp->bytes) {
+ dev_err(&fp->dev->dev, "drop %X. looking for check byte\n", c);
+ return;
+ }
+
+ if (c == '\xC0' && fp->bytes) {
+ /* msg check byte should not be found in the middle of a set */
+ dev_warn(&fp->dev->dev, "discarding %d bytes from %llX\n",
+ fp->bytes, *(u64 *)(fp->buf));
+ fp->bytes = 0;
+ }
+
+ fp->buf[fp->bytes] = c;
+ ++fp->bytes;
+}
+
+
+static irqreturn_t fp_interrupt(struct serio *serio, unsigned char data,
+ unsigned int flags)
+{
+ struct evifpanel *fp = serio_get_drvdata(serio);
+
+ fp_add_byte(fp, data);
+ if (fp->bytes == 8) {
+ fp_parse_buf(fp);
+ fp->bytes = 0;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void fp_set_device_attrs(struct evifpanel *fp)
+{
+ snprintf(fp->name, sizeof(fp->name),
+ "EVI Frontpanel keypad and sliders");
+ snprintf(fp->phys, sizeof(fp->phys),
+ "%s/input0", fp->serio->phys);
+
+ fp->dev->name = fp->name;
+ fp->dev->phys = fp->phys;
+ fp->dev->id.bustype = BUS_RS232;
+ fp->dev->dev.parent = &fp->serio->dev;
+
+ fp->dev->evbit[0] = BIT_MASK(EV_KEY);
+ __set_bit(KEY_D, fp->dev->keybit);
+ __set_bit(KEY_N, fp->dev->keybit);
+ __set_bit(KEY_BACKSPACE, fp->dev->keybit);
+ __set_bit(KEY_ENTER, fp->dev->keybit);
+ __set_bit(KEY_F1, fp->dev->keybit);
+ __set_bit(KEY_F2, fp->dev->keybit);
+ __set_bit(KEY_F3, fp->dev->keybit);
+ __set_bit(KEY_F4, fp->dev->keybit);
+ __set_bit(KEY_ESC, fp->dev->keybit);
+}
+
+static int fp_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct evifpanel *fp;
+ struct input_dev *input_dev;
+ int error = -ENOMEM;
+
+ fp = kzalloc(sizeof(struct evifpanel), GFP_KERNEL);
+
+ input_dev = input_allocate_device();
+ if (!input_dev || !fp) {
+ pr_err("evifpanel: failed to get memory\n");
+ goto fail1;
+ }
+
+ fp->dev = input_dev;
+ fp->serio = serio;
+ fp_set_device_attrs(fp);
+ serio_set_drvdata(serio, fp);
+
+ error = serio_open(serio, drv);
+ if (error) {
+ pr_err("evifpanel: failed to open serio\n");
+ goto fail2;
+ }
+ fp_request_fw_ver(fp);
+
+ error = input_register_device(input_dev);
+ if (error) {
+ pr_err("evifpanel: failed to register input device\n");
+ goto fail3;
+ }
+
+ return 0;
+
+fail3:
+ serio_close(serio);
+fail2:
+ serio_set_drvdata(serio, NULL);
+fail1:
+ input_free_device(input_dev);
+ kfree(fp);
+ pr_err("fp_connect: FAILED\n");
+
+ return error;
+}
+
+static void fp_disconnect(struct serio *serio)
+{
+ struct evifpanel *fp = serio_get_drvdata(serio);
+
+ input_unregister_device(fp->dev);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ kfree(fp);
+};
+
+static struct serio_device_id fp_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_ANY,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+static struct serio_driver fp_drv = {
+ .driver = {
+ .name = "evifpanel",
+ },
+ .description = DRIVER_DESC,
+ .id_table = fp_ids,
+ .connect = fp_connect,
+ .interrupt = fp_interrupt,
+ .disconnect = fp_disconnect,
+};
+
+module_serio_driver(fp_drv);
This is my first input driver, and my first attempt to istart the process of upstreaming something, (other than a small patch). I apologize in advance :) The Uniwest EVI front panel has 9 usable buttons which correspond to keyboard keys, as well as horizontal and verical slidersr, (the sliders are like touch based scroll bars) and 9 indicator LEDs This initial version of the driver just supports the buttons. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> --- drivers/input/misc/Kconfig | 10 ++ drivers/input/misc/Makefile | 1 + drivers/input/misc/evifpanel.c | 265 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 276 insertions(+) create mode 100644 drivers/input/misc/evifpanel.c