@@ -201,6 +201,8 @@ source "drivers/input/touchscreen/Kconfig"
source "drivers/input/misc/Kconfig"
+source "drivers/input/rmi4/Kconfig"
+
endif
menu "Hardware I/O ports"
@@ -26,3 +26,5 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/
obj-$(CONFIG_INPUT_MISC) += misc/
obj-$(CONFIG_INPUT_APMPOWER) += apm-power.o
+
+obj-$(CONFIG_RMI4_CORE) += rmi4/
new file mode 100644
@@ -0,0 +1,26 @@
+#
+# RMI4 configuration
+#
+config RMI4_CORE
+ tristate "Synaptics RMI4 bus support"
+ help
+ Say Y here if you want to support the Synaptics RMI4 bus. This is
+ required for all RMI4 device support.
+
+ If unsure, say Y.
+
+ This feature is not currently available as a loadable module.
+
+config RMI4_DEBUG
+ bool "RMI4 Debugging"
+ depends on RMI4_CORE
+ select DEBUG_FS
+ help
+ Say Y here to enable debug feature in the RMI4 driver.
+
+ Note that the RMI4 driver debug features can generate a lot of
+ output (potentially clogging up your dmesg output) and generally
+ slow down driver operation. It's recommended to enable them only
+ if you are actively developing/debugging RMI4 features.
+
+ If unsure, say N.
new file mode 100644
@@ -0,0 +1,4 @@
+obj-$(CONFIG_RMI4_CORE) += rmi_core.o
+rmi_core-y := rmi_bus.o rmi_driver.o rmi_f01.o
+
+ccflags-$(CONFIG_RMI4_DEBUG) += -DDEBUG
new file mode 100644
@@ -0,0 +1,318 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/kconfig.h>
+#include <linux/list.h>
+#include <linux/pm.h>
+#include <linux/rmi.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/of.h>
+#include "rmi_bus.h"
+#include "rmi_driver.h"
+
+/*
+ * RMI Physical devices
+ *
+ * Physical RMI device consists of several functions serving particular
+ * purpose. For example F11 is a 2D touch sensor while F01 is a generic
+ * function present in every RMI device.
+ */
+
+static void rmi_release_device(struct device *dev)
+{
+ struct rmi_device *rmi_dev = to_rmi_device(dev);
+
+ kfree(rmi_dev);
+}
+
+static struct device_type rmi_device_type = {
+ .name = "rmi_sensor",
+ .release = rmi_release_device,
+};
+
+bool rmi_is_physical_device(struct device *dev)
+{
+ return dev->type == &rmi_device_type;
+}
+
+/**
+ * rmi_register_transport_device - register a transport device connection
+ * on the RMI bus. Transport drivers provide communication from the devices
+ * on a bus (such as SPI, I2C, and so on) to the RMI4 sensor.
+ *
+ * @xport: the transport device to register
+ */
+int rmi_register_transport_device(struct rmi_transport_dev *xport)
+{
+ static atomic_t transport_device_count = ATOMIC_INIT(0);
+ struct rmi_device *rmi_dev;
+ int error;
+
+ rmi_dev = kzalloc(sizeof(struct rmi_device), GFP_KERNEL);
+ if (!rmi_dev)
+ return -ENOMEM;
+
+ device_initialize(&rmi_dev->dev);
+
+ rmi_dev->xport = xport;
+ rmi_dev->number = atomic_inc_return(&transport_device_count) - 1;
+
+ dev_set_name(&rmi_dev->dev, "rmi%02d", rmi_dev->number);
+
+ rmi_dev->dev.bus = &rmi_bus_type;
+ rmi_dev->dev.type = &rmi_device_type;
+
+ xport->rmi_dev = rmi_dev;
+
+ error = device_add(&rmi_dev->dev);
+ if (error)
+ goto err_put_device;
+
+ dev_dbg(xport->dev, "%s: Registered %s as %s.\n", __func__,
+ dev_name(rmi_dev->xport->dev), dev_name(&rmi_dev->dev));
+
+ return 0;
+
+err_put_device:
+ put_device(&rmi_dev->dev);
+ return error;
+}
+EXPORT_SYMBOL_GPL(rmi_register_transport_device);
+
+/**
+ * rmi_unregister_transport_device - unregister a transport device connection
+ * @xport: the transport driver to unregister
+ *
+ */
+void rmi_unregister_transport_device(struct rmi_transport_dev *xport)
+{
+ struct rmi_device *rmi_dev = xport->rmi_dev;
+
+ device_del(&rmi_dev->dev);
+ put_device(&rmi_dev->dev);
+}
+EXPORT_SYMBOL(rmi_unregister_transport_device);
+
+
+/* Function specific stuff */
+
+static void rmi_release_function(struct device *dev)
+{
+ struct rmi_function *fn = to_rmi_function(dev);
+
+ kfree(fn);
+}
+
+static struct device_type rmi_function_type = {
+ .name = "rmi_function",
+ .release = rmi_release_function,
+};
+
+bool rmi_is_function_device(struct device *dev)
+{
+ return dev->type == &rmi_function_type;
+}
+
+static int rmi_function_match(struct device *dev, struct device_driver *drv)
+{
+ struct rmi_function_handler *handler = to_rmi_function_handler(drv);
+ struct rmi_function *fn = to_rmi_function(dev);
+
+ return fn->fd.function_number == handler->func;
+}
+
+static int rmi_function_probe(struct device *dev)
+{
+ struct rmi_function *fn = to_rmi_function(dev);
+ struct rmi_function_handler *handler =
+ to_rmi_function_handler(dev->driver);
+ int error;
+
+ if (handler->probe) {
+ error = handler->probe(fn);
+ return error;
+ }
+
+ return 0;
+}
+
+static int rmi_function_remove(struct device *dev)
+{
+ struct rmi_function *fn = to_rmi_function(dev);
+ struct rmi_function_handler *handler =
+ to_rmi_function_handler(dev->driver);
+
+ if (handler->remove)
+ handler->remove(fn);
+
+ return 0;
+}
+
+int rmi_register_function(struct rmi_function *fn)
+{
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ int error;
+
+ device_initialize(&fn->dev);
+
+ dev_set_name(&fn->dev, "%s.fn%02x",
+ dev_name(&rmi_dev->dev), fn->fd.function_number);
+
+ fn->dev.parent = &rmi_dev->dev;
+ fn->dev.type = &rmi_function_type;
+ fn->dev.bus = &rmi_bus_type;
+
+ error = device_add(&fn->dev);
+ if (error) {
+ dev_err(&rmi_dev->dev,
+ "Failed device_register function device %s\n",
+ dev_name(&fn->dev));
+ goto err_put_device;
+ }
+
+ dev_dbg(&rmi_dev->dev, "Registered F%02X.\n", fn->fd.function_number);
+
+ return 0;
+
+err_put_device:
+ put_device(&fn->dev);
+ return error;
+}
+
+void rmi_unregister_function(struct rmi_function *fn)
+{
+ device_del(&fn->dev);
+
+ if (fn->dev.of_node)
+ of_node_put(fn->dev.of_node);
+
+ put_device(&fn->dev);
+}
+
+/**
+ * rmi_register_function_handler - register a handler for an RMI function
+ * @handler: RMI handler that should be registered.
+ * @module: pointer to module that implements the handler
+ * @mod_name: name of the module implementing the handler
+ *
+ * This function performs additional setup of RMI function handler and
+ * registers it with the RMI core so that it can be bound to
+ * RMI function devices.
+ */
+int __rmi_register_function_handler(struct rmi_function_handler *handler,
+ struct module *owner,
+ const char *mod_name)
+{
+ struct device_driver *driver = &handler->driver;
+ int error;
+
+ driver->bus = &rmi_bus_type;
+ driver->owner = owner;
+ driver->mod_name = mod_name;
+ driver->probe = rmi_function_probe;
+ driver->remove = rmi_function_remove;
+
+ error = driver_register(&handler->driver);
+ if (error) {
+ pr_err("driver_register() failed for %s, error: %d\n",
+ handler->driver.name, error);
+ return error;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__rmi_register_function_handler);
+
+/**
+ * rmi_unregister_function_handler - unregister given RMI function handler
+ * @handler: RMI handler that should be unregistered.
+ *
+ * This function unregisters given function handler from RMI core which
+ * causes it to be unbound from the function devices.
+ */
+void rmi_unregister_function_handler(struct rmi_function_handler *handler)
+{
+ driver_unregister(&handler->driver);
+}
+EXPORT_SYMBOL_GPL(rmi_unregister_function_handler);
+
+/* Bus specific stuff */
+
+static int rmi_bus_match(struct device *dev, struct device_driver *drv)
+{
+ bool physical = rmi_is_physical_device(dev);
+
+ /* First see if types are not compatible */
+ if (physical != rmi_is_physical_driver(drv))
+ return 0;
+
+ return physical || rmi_function_match(dev, drv);
+}
+
+struct bus_type rmi_bus_type = {
+ .match = rmi_bus_match,
+ .name = "rmi",
+};
+
+static int __init rmi_bus_init(void)
+{
+ int error;
+
+ error = bus_register(&rmi_bus_type);
+ if (error) {
+ pr_err("%s: error registering the RMI bus: %d\n",
+ __func__, error);
+ return error;
+ }
+
+ error = rmi_register_f01_handler();
+ if (error) {
+ pr_err("%s: error registering the RMI F01 handler: %d\n",
+ __func__, error);
+ goto err_unregister_bus;
+ }
+
+ error = rmi_register_physical_driver();
+ if (error) {
+ pr_err("%s: error registering the RMI physical driver: %d\n",
+ __func__, error);
+ goto err_unregister_f01;
+ }
+
+ return 0;
+
+err_unregister_f01:
+ rmi_unregister_f01_handler();
+err_unregister_bus:
+ bus_unregister(&rmi_bus_type);
+ return error;
+}
+module_init(rmi_bus_init);
+
+static void __exit rmi_bus_exit(void)
+{
+ /*
+ * We should only ever get here if all drivers are unloaded, so
+ * all we have to do at this point is unregister ourselves.
+ */
+
+ rmi_unregister_physical_driver();
+ rmi_unregister_f01_handler();
+ bus_unregister(&rmi_bus_type);
+}
+module_exit(rmi_bus_exit);
+
+MODULE_AUTHOR("Christopher Heiny <cheiny@synaptics.com");
+MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com");
+MODULE_DESCRIPTION("RMI bus");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(RMI_DRIVER_VERSION);
new file mode 100644
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _RMI_BUS_H
+#define _RMI_BUS_H
+
+#include <linux/rmi.h>
+
+struct rmi_device;
+
+/**
+ * struct rmi_function - represents the implementation of an RMI4
+ * function for a particular device (basically, a driver for that RMI4 function)
+ *
+ * @fd: The function descriptor of the RMI function
+ * @rmi_dev: Pointer to the RMI device associated with this function container
+ * @dev: The device associated with this particular function.
+ *
+ * @num_of_irqs: The number of irqs needed by this function
+ * @irq_pos: The position in the irq bitfield this function holds
+ * @irq_mask: For convience, can be used to mask IRQ bits off during ATTN
+ * interrupt handling.
+ * @data: Private data pointer
+ *
+ * @node: entry in device's list of functions
+ */
+struct rmi_function {
+ struct rmi_function_descriptor fd;
+ struct rmi_device *rmi_dev;
+ struct device dev;
+ struct list_head node;
+
+ unsigned int num_of_irqs;
+ unsigned int irq_pos;
+ unsigned long irq_mask[];
+};
+
+#define to_rmi_function(d) container_of(d, struct rmi_function, dev)
+
+bool rmi_is_function_device(struct device *dev);
+
+int __must_check rmi_register_function(struct rmi_function *);
+void rmi_unregister_function(struct rmi_function *);
+
+/**
+ * struct rmi_function_handler - driver routines for a particular RMI function.
+ *
+ * @func: The RMI function number
+ * @reset: Called when a reset of the touch sensor is detected. The routine
+ * should perform any out-of-the-ordinary reset handling that might be
+ * necessary. Restoring of touch sensor configuration registers should be
+ * handled in the config() callback, below.
+ * @config: Called when the function container is first initialized, and
+ * after a reset is detected. This routine should write any necessary
+ * configuration settings to the device.
+ * @attention: Called when the IRQ(s) for the function are set by the touch
+ * sensor.
+ * @suspend: Should perform any required operations to suspend the particular
+ * function.
+ * @resume: Should perform any required operations to resume the particular
+ * function.
+ *
+ * All callbacks are expected to return 0 on success, error code on failure.
+ */
+struct rmi_function_handler {
+ struct device_driver driver;
+
+ u8 func;
+
+ int (*probe)(struct rmi_function *fn);
+ void (*remove)(struct rmi_function *fn);
+ int (*config)(struct rmi_function *fn);
+ int (*reset)(struct rmi_function *fn);
+ int (*attention)(struct rmi_function *fn, unsigned long *irq_bits);
+};
+
+#define to_rmi_function_handler(d) \
+ container_of(d, struct rmi_function_handler, driver)
+
+int __must_check __rmi_register_function_handler(struct rmi_function_handler *,
+ struct module *, const char *);
+#define rmi_register_function_handler(handler) \
+ __rmi_register_function_handler(handler, THIS_MODULE, KBUILD_MODNAME)
+
+void rmi_unregister_function_handler(struct rmi_function_handler *);
+
+
+
+#define to_rmi_driver(d) \
+ container_of(d, struct rmi_driver, driver)
+
+#define to_rmi_device(d) container_of(d, struct rmi_device, dev)
+
+static inline struct rmi_device_platform_data *
+rmi_get_platform_data(struct rmi_device *d)
+{
+ return &d->xport->pdata;
+}
+
+bool rmi_is_physical_device(struct device *dev);
+
+/**
+ * rmi_read - read a single byte
+ * @d: Pointer to an RMI device
+ * @addr: The address to read from
+ * @buf: The read buffer
+ *
+ * Reads a single byte of data using the underlying transport protocol
+ * into memory pointed by @buf. It returns 0 on success or a negative
+ * error code.
+ */
+static inline int rmi_read(struct rmi_device *d, u16 addr, u8 *buf)
+{
+ return d->xport->ops->read_block(d->xport, addr, buf, 1);
+}
+
+/**
+ * rmi_read_block - read a block of bytes
+ * @d: Pointer to an RMI device
+ * @addr: The start address to read from
+ * @buf: The read buffer
+ * @len: Length of the read buffer
+ *
+ * Reads a block of byte data using the underlying transport protocol
+ * into memory pointed by @buf. It returns 0 on success or a negative
+ * error code.
+ */
+static inline int rmi_read_block(struct rmi_device *d, u16 addr,
+ void *buf, size_t len)
+{
+ return d->xport->ops->read_block(d->xport, addr, buf, len);
+}
+
+/**
+ * rmi_write - write a single byte
+ * @d: Pointer to an RMI device
+ * @addr: The address to write to
+ * @data: The data to write
+ *
+ * Writes a single byte using the underlying transport protocol. It
+ * returns zero on success or a negative error code.
+ */
+static inline int rmi_write(struct rmi_device *d, u16 addr, u8 data)
+{
+ return d->xport->ops->write_block(d->xport, addr, &data, 1);
+}
+
+/**
+ * rmi_write_block - write a block of bytes
+ * @d: Pointer to an RMI device
+ * @addr: The start address to write to
+ * @buf: The write buffer
+ * @len: Length of the write buffer
+ *
+ * Writes a block of byte data from buf using the underlaying transport
+ * protocol. It returns the amount of bytes written or a negative error code.
+ */
+static inline int rmi_write_block(struct rmi_device *d, u16 addr,
+ const void *buf, size_t len)
+{
+ return d->xport->ops->write_block(d->xport, addr, buf, len);
+}
+
+int rmi_for_each_dev(void *data, int (*func)(struct device *dev, void *data));
+
+/**
+ * module_rmi_driver() - Helper macro for registering a function driver
+ * @__rmi_driver: rmi_function_handler struct
+ *
+ * Helper macro for RMI4 function drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each module
+ * may only use this macro once, and calling it replaces module_init()
+ * and module_exit().
+ */
+#define module_rmi_driver(__rmi_driver) \
+ module_driver(__rmi_driver, \
+ rmi_register_function_handler, \
+ rmi_unregister_function_handler)
+
+
+extern struct bus_type rmi_bus_type;
+
+int rmi_of_property_read_u32(struct device *dev, u32 *result,
+ const char *prop, bool optional);
+int rmi_of_property_read_u16(struct device *dev, u16 *result,
+ const char *prop, bool optional);
+int rmi_of_property_read_u8(struct device *dev, u8 *result,
+ const char *prop, bool optional);
+#endif
new file mode 100644
@@ -0,0 +1,1085 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This driver provides the core support for a single RMI4-based device.
+ *
+ * The RMI4 specification can be found here (URL split for line length):
+ *
+ * http://www.synaptics.com/sites/default/files/
+ * 511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/kconfig.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <uapi/linux/input.h>
+#include <linux/rmi.h>
+#include "rmi_bus.h"
+#include "rmi_driver.h"
+
+#define HAS_NONSTANDARD_PDT_MASK 0x40
+#define RMI4_MAX_PAGE 0xff
+#define RMI4_PAGE_SIZE 0x100
+#define RMI4_PAGE_MASK 0xFF00
+
+#define RMI_DEVICE_RESET_CMD 0x01
+#define DEFAULT_RESET_DELAY_MS 100
+
+static irqreturn_t rmi_irq_thread(int irq, void *p)
+{
+ struct rmi_transport_dev *xport = p;
+ struct rmi_device *rmi_dev = xport->rmi_dev;
+ struct rmi_driver *driver = rmi_dev->driver;
+ struct rmi_driver_data *data;
+
+ data = dev_get_drvdata(&rmi_dev->dev);
+
+ data->attn_count++;
+ if (driver && driver->irq_handler && rmi_dev)
+ driver->irq_handler(rmi_dev, irq);
+
+ return IRQ_HANDLED;
+}
+
+static void disable_sensor(struct rmi_device *rmi_dev)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+
+ if (!data->enabled)
+ return;
+
+ if (rmi_dev->xport->ops->disable_device)
+ rmi_dev->xport->ops->disable_device(rmi_dev->xport);
+
+ if (rmi_dev->xport->irq > 0) {
+ disable_irq(rmi_dev->xport->irq);
+ free_irq(rmi_dev->xport->irq, rmi_dev->xport);
+ }
+
+ data->enabled = false;
+}
+
+static void rmi_free_function_list(struct rmi_device *rmi_dev)
+{
+ struct rmi_function *fn, *tmp;
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+
+ data->f01_container = NULL;
+
+ /* Doing it in the reverse order so F01 will be removed last */
+ list_for_each_entry_safe_reverse(fn, tmp,
+ &data->function_list, node) {
+ list_del(&fn->node);
+ rmi_unregister_function(fn);
+ }
+}
+
+static int reset_one_function(struct rmi_function *fn)
+{
+ struct rmi_function_handler *fh;
+ int retval = 0;
+
+ if (!fn || !fn->dev.driver)
+ return 0;
+
+ fh = to_rmi_function_handler(fn->dev.driver);
+ if (fh->reset) {
+ retval = fh->reset(fn);
+ if (retval < 0)
+ dev_err(&fn->dev, "Reset failed with code %d.\n",
+ retval);
+ }
+
+ return retval;
+}
+
+static int configure_one_function(struct rmi_function *fn)
+{
+ struct rmi_function_handler *fh;
+ int retval = 0;
+
+ if (!fn || !fn->dev.driver)
+ return 0;
+
+ fh = to_rmi_function_handler(fn->dev.driver);
+ if (fh->config) {
+ retval = fh->config(fn);
+ if (retval < 0)
+ dev_err(&fn->dev, "Config failed with code %d.\n",
+ retval);
+ }
+
+ return retval;
+}
+
+static int rmi_driver_process_reset_requests(struct rmi_device *rmi_dev)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ struct rmi_function *entry;
+ int retval;
+
+ list_for_each_entry(entry, &data->function_list, node) {
+ retval = reset_one_function(entry);
+ if (retval < 0)
+ return retval;
+ }
+
+ return 0;
+}
+
+static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ struct rmi_function *entry;
+ int retval;
+
+ list_for_each_entry(entry, &data->function_list, node) {
+ retval = configure_one_function(entry);
+ if (retval < 0)
+ return retval;
+ }
+
+ return 0;
+}
+
+static void process_one_interrupt(struct rmi_driver_data *data,
+ struct rmi_function *fn)
+{
+ struct rmi_function_handler *fh;
+
+ if (!fn || !fn->dev.driver)
+ return;
+
+ fh = to_rmi_function_handler(fn->dev.driver);
+ if (fn->irq_mask && fh->attention) {
+ bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask,
+ data->irq_count);
+ if (!bitmap_empty(data->fn_irq_bits, data->irq_count))
+ fh->attention(fn, data->fn_irq_bits);
+ }
+}
+
+int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ struct device *dev = &rmi_dev->dev;
+ struct rmi_function *entry;
+ int error;
+
+ if (!rmi_dev->xport->attn_data) {
+ error = rmi_read_block(rmi_dev,
+ data->f01_container->fd.data_base_addr + 1,
+ data->irq_status, data->num_of_irq_regs);
+ if (error < 0) {
+ dev_err(dev, "Failed to read irqs, code=%d\n", error);
+ return error;
+ }
+ }
+
+ mutex_lock(&data->irq_mutex);
+ bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask,
+ data->irq_count);
+ /*
+ * At this point, irq_status has all bits that are set in the
+ * interrupt status register and are enabled.
+ */
+ mutex_unlock(&data->irq_mutex);
+
+ /*
+ * It would be nice to be able to use irq_chip to handle these
+ * nested IRQs. Unfortunately, most of the current customers for
+ * this driver are using older kernels (3.0.x) that don't support
+ * the features required for that. Once they've shifted to more
+ * recent kernels (say, 3.3 and higher), this should be switched to
+ * use irq_chip.
+ */
+ list_for_each_entry(entry, &data->function_list, node)
+ if (entry->irq_mask)
+ process_one_interrupt(data, entry);
+
+ if (data->input)
+ input_sync(data->input);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rmi_process_interrupt_requests);
+
+static int enable_sensor(struct rmi_device *rmi_dev)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ struct rmi_transport_dev *xport;
+ int retval = 0;
+
+ if (data->enabled)
+ return 0;
+
+ if (rmi_dev->xport->ops->enable_device) {
+ retval = rmi_dev->xport->ops->enable_device(rmi_dev->xport);
+ if (retval)
+ return retval;
+ }
+
+ retval = rmi_driver_process_config_requests(rmi_dev);
+ if (retval < 0)
+ return retval;
+
+ xport = rmi_dev->xport;
+ if (xport->irq) {
+ retval = request_threaded_irq(xport->irq,
+ xport->hard_irq ? xport->hard_irq : NULL,
+ xport->irq_thread ?
+ xport->irq_thread : rmi_irq_thread,
+ xport->irq_flags,
+ dev_name(&rmi_dev->dev), xport);
+ if (retval)
+ return retval;
+ }
+
+ data->enabled = true;
+
+ return rmi_process_interrupt_requests(rmi_dev);
+}
+
+/**
+ * rmi_driver_set_input_params - set input device id and other data.
+ *
+ * @rmi_dev: Pointer to an RMI device
+ * @input: Pointer to input device
+ *
+ */
+static int rmi_driver_set_input_params(struct rmi_device *rmi_dev,
+ struct input_dev *input)
+{
+ input->name = SYNAPTICS_INPUT_DEVICE_NAME;
+ input->id.vendor = SYNAPTICS_VENDOR_ID;
+ input->id.bustype = BUS_RMI;
+ return 0;
+}
+
+static void rmi_driver_set_input_name(struct rmi_device *rmi_dev,
+ struct input_dev *input)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ char *device_name = rmi_f01_get_product_ID(data->f01_container);
+ char *name;
+
+ name = devm_kasprintf(&rmi_dev->dev, GFP_KERNEL,
+ "Synaptics %s", device_name);
+ if (!name)
+ return;
+
+ input->name = name;
+}
+
+static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
+ unsigned long *mask)
+{
+ int error = 0;
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ struct device *dev = &rmi_dev->dev;
+
+ mutex_lock(&data->irq_mutex);
+ bitmap_or(data->new_irq_mask,
+ data->current_irq_mask, mask, data->irq_count);
+
+ error = rmi_write_block(rmi_dev,
+ data->f01_container->fd.control_base_addr + 1,
+ data->new_irq_mask, data->num_of_irq_regs);
+ if (error < 0) {
+ dev_err(dev, "%s: Failed to change enabled interrupts!",
+ __func__);
+ goto error_unlock;
+ }
+ bitmap_copy(data->current_irq_mask, data->new_irq_mask,
+ data->num_of_irq_regs);
+
+error_unlock:
+ mutex_unlock(&data->irq_mutex);
+ return error;
+}
+
+static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
+ unsigned long *mask)
+{
+ int error = 0;
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ struct device *dev = &rmi_dev->dev;
+
+ mutex_lock(&data->irq_mutex);
+ bitmap_andnot(data->new_irq_mask,
+ data->current_irq_mask, mask, data->irq_count);
+
+ error = rmi_write_block(rmi_dev,
+ data->f01_container->fd.control_base_addr + 1,
+ data->new_irq_mask, data->num_of_irq_regs);
+ if (error < 0) {
+ dev_err(dev, "%s: Failed to change enabled interrupts!",
+ __func__);
+ goto error_unlock;
+ }
+ bitmap_copy(data->current_irq_mask, data->new_irq_mask,
+ data->num_of_irq_regs);
+
+error_unlock:
+ mutex_unlock(&data->irq_mutex);
+ return error;
+}
+
+static int rmi_driver_irq_handler(struct rmi_device *rmi_dev, int irq)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+
+ might_sleep();
+ /*
+ * Can get called before the driver is fully ready to deal with
+ * interrupts.
+ */
+ if (!data || !data->f01_container) {
+ dev_dbg(&rmi_dev->dev,
+ "Not ready to handle interrupts yet!\n");
+ return 0;
+ }
+
+ return rmi_process_interrupt_requests(rmi_dev);
+}
+
+static int rmi_driver_reset_handler(struct rmi_device *rmi_dev)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ int error;
+
+ /*
+ * Can get called before the driver is fully ready to deal with
+ * this situation.
+ */
+ if (!data || !data->f01_container) {
+ dev_warn(&rmi_dev->dev,
+ "Not ready to handle reset yet!\n");
+ return 0;
+ }
+
+ error = rmi_read_block(rmi_dev,
+ data->f01_container->fd.control_base_addr + 1,
+ data->current_irq_mask, data->num_of_irq_regs);
+ if (error < 0) {
+ dev_err(&rmi_dev->dev, "%s: Failed to read current IRQ mask.\n",
+ __func__);
+ return error;
+ }
+
+ error = rmi_driver_process_reset_requests(rmi_dev);
+ if (error < 0)
+ return error;
+
+ error = rmi_driver_process_config_requests(rmi_dev);
+ if (error < 0)
+ return error;
+
+ return 0;
+}
+
+int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry,
+ u16 pdt_address)
+{
+ u8 buf[RMI_PDT_ENTRY_SIZE];
+ int error;
+
+ error = rmi_read_block(rmi_dev, pdt_address, buf, RMI_PDT_ENTRY_SIZE);
+ if (error) {
+ dev_err(&rmi_dev->dev, "Read PDT entry at %#06x failed, code: %d.\n",
+ pdt_address, error);
+ return error;
+ }
+
+ entry->page_start = pdt_address & RMI4_PAGE_MASK;
+ entry->query_base_addr = buf[0];
+ entry->command_base_addr = buf[1];
+ entry->control_base_addr = buf[2];
+ entry->data_base_addr = buf[3];
+ entry->interrupt_source_count = buf[4] & RMI_PDT_INT_SOURCE_COUNT_MASK;
+ entry->function_version = (buf[4] & RMI_PDT_FUNCTION_VERSION_MASK) >> 5;
+ entry->function_number = buf[5];
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rmi_read_pdt_entry);
+
+static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt,
+ struct rmi_function_descriptor *fd)
+{
+ fd->query_base_addr = pdt->query_base_addr + pdt->page_start;
+ fd->command_base_addr = pdt->command_base_addr + pdt->page_start;
+ fd->control_base_addr = pdt->control_base_addr + pdt->page_start;
+ fd->data_base_addr = pdt->data_base_addr + pdt->page_start;
+ fd->function_number = pdt->function_number;
+ fd->interrupt_source_count = pdt->interrupt_source_count;
+ fd->function_version = pdt->function_version;
+}
+
+#define RMI_SCAN_CONTINUE 0
+#define RMI_SCAN_DONE 1
+
+static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
+ int page,
+ void *ctx,
+ int (*callback)(struct rmi_device *rmi_dev,
+ void *ctx,
+ const struct pdt_entry *entry))
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ struct pdt_entry pdt_entry;
+ u16 page_start = RMI4_PAGE_SIZE * page;
+ u16 pdt_start = page_start + PDT_START_SCAN_LOCATION;
+ u16 pdt_end = page_start + PDT_END_SCAN_LOCATION;
+ u16 addr;
+ int error;
+ int retval;
+
+ for (addr = pdt_start; addr >= pdt_end; addr -= RMI_PDT_ENTRY_SIZE) {
+ error = rmi_read_pdt_entry(rmi_dev, &pdt_entry, addr);
+ if (error)
+ return error;
+
+ if (RMI4_END_OF_PDT(pdt_entry.function_number))
+ break;
+
+ retval = callback(rmi_dev, ctx, &pdt_entry);
+ if (retval != RMI_SCAN_CONTINUE)
+ return retval;
+ }
+
+ return (data->f01_bootloader_mode || addr == pdt_start) ?
+ RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
+}
+
+static int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
+ int (*callback)(struct rmi_device *rmi_dev,
+ void *ctx,
+ const struct pdt_entry *entry))
+{
+ int page;
+ int retval = RMI_SCAN_DONE;
+
+ for (page = 0; page <= RMI4_MAX_PAGE; page++) {
+ retval = rmi_scan_pdt_page(rmi_dev, page, ctx, callback);
+ if (retval != RMI_SCAN_CONTINUE)
+ break;
+ }
+
+ return retval < 0 ? retval : 0;
+}
+
+int rmi_read_register_desc(struct rmi_device *d, u16 addr,
+ struct rmi_register_descriptor *rdesc)
+{
+ int ret;
+ u8 size_presence_reg;
+ u8 buf[35];
+ int presense_offset = 1;
+ u8 *struct_buf;
+ int reg;
+ int offset = 0;
+ int map_offset = 0;
+ int i;
+ int b;
+
+ /*
+ * The first register of the register descriptor is the size of
+ * the register descriptor's presense register.
+ */
+ ret = rmi_read(d, addr, &size_presence_reg);
+ if (ret)
+ return ret;
+ ++addr;
+
+ if (size_presence_reg < 0 || size_presence_reg > 35)
+ return -EIO;
+
+ memset(buf, 0, sizeof(buf));
+
+ /*
+ * The presence register contains the size of the register structure
+ * and a bitmap which identified which packet registers are present
+ * for this particular register type (ie query, control, or data).
+ */
+ ret = rmi_read_block(d, addr, buf, size_presence_reg);
+ if (ret)
+ return ret;
+ ++addr;
+
+ if (buf[0] == 0) {
+ presense_offset = 3;
+ rdesc->struct_size = buf[1] | (buf[2] << 8);
+ } else {
+ rdesc->struct_size = buf[0];
+ }
+
+ for (i = presense_offset; i < size_presence_reg; i++) {
+ for (b = 0; b < 8; b++) {
+ if (buf[i] & (0x1 << b))
+ bitmap_set(rdesc->presense_map, map_offset, 1);
+ ++map_offset;
+ }
+ }
+
+ rdesc->num_registers = bitmap_weight(rdesc->presense_map,
+ RMI_REG_DESC_PRESENSE_BITS);
+
+ rdesc->registers = devm_kzalloc(&d->dev, rdesc->num_registers *
+ sizeof(struct rmi_register_desc_item),
+ GFP_KERNEL);
+ if (!rdesc->registers)
+ return -ENOMEM;
+
+ /*
+ * Allocate a temporary buffer to hold the register structure.
+ * I'm not using devm_kzalloc here since it will not be retained
+ * after exiting this function
+ */
+ struct_buf = kzalloc(rdesc->struct_size, GFP_KERNEL);
+ if (!struct_buf)
+ return -ENOMEM;
+
+ /*
+ * The register structure contains information about every packet
+ * register of this type. This includes the size of the packet
+ * register and a bitmap of all subpackets contained in the packet
+ * register.
+ */
+ ret = rmi_read_block(d, addr, struct_buf, rdesc->struct_size);
+ if (ret)
+ goto free_struct_buff;
+
+ reg = find_first_bit(rdesc->presense_map, RMI_REG_DESC_PRESENSE_BITS);
+ map_offset = 0;
+ for (i = 0; i < rdesc->num_registers; i++) {
+ struct rmi_register_desc_item *item = &rdesc->registers[i];
+ int reg_size = struct_buf[offset];
+
+ ++offset;
+ if (reg_size == 0) {
+ reg_size = struct_buf[offset] |
+ (struct_buf[offset + 1] << 8);
+ offset += 2;
+ }
+
+ if (reg_size == 0) {
+ reg_size = struct_buf[offset] |
+ (struct_buf[offset + 1] << 8) |
+ (struct_buf[offset + 2] << 16) |
+ (struct_buf[offset + 3] << 24);
+ offset += 4;
+ }
+
+ item->reg = reg;
+ item->reg_size = reg_size;
+
+ do {
+ for (b = 0; b < 7; b++) {
+ if (struct_buf[offset] & (0x1 << b))
+ bitmap_set(item->subpacket_map,
+ map_offset, 1);
+ ++map_offset;
+ }
+ } while (struct_buf[offset++] & 0x80);
+
+ item->num_subpackets = bitmap_weight(item->subpacket_map,
+ RMI_REG_DESC_SUBPACKET_BITS);
+
+ dev_dbg(&d->dev, "%s: reg: %d reg size: %ld subpackets: %d\n",
+ __func__, item->reg, item->reg_size,
+ item->num_subpackets);
+
+ reg = find_next_bit(rdesc->presense_map,
+ RMI_REG_DESC_PRESENSE_BITS, reg + 1);
+ }
+
+free_struct_buff:
+ kfree(struct_buf);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rmi_read_register_desc);
+
+const struct rmi_register_desc_item *rmi_get_register_desc_item(
+ struct rmi_register_descriptor *rdesc, u16 reg)
+{
+ const struct rmi_register_desc_item *item;
+ int i;
+
+ for (i = 0; i < rdesc->num_registers; i++) {
+ item = &rdesc->registers[i];
+ if (item->reg == reg)
+ return item;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(rmi_get_register_desc_item);
+
+size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc)
+{
+ const struct rmi_register_desc_item *item;
+ int i;
+ size_t size = 0;
+
+ for (i = 0; i < rdesc->num_registers; i++) {
+ item = &rdesc->registers[i];
+ size += item->reg_size;
+ }
+ return size;
+}
+EXPORT_SYMBOL_GPL(rmi_register_desc_calc_size);
+
+/* Compute the register offset relative to the base address */
+int rmi_register_desc_calc_reg_offset(
+ struct rmi_register_descriptor *rdesc, u16 reg)
+{
+ const struct rmi_register_desc_item *item;
+ int offset = 0;
+ int i;
+
+ for (i = 0; i < rdesc->num_registers; i++) {
+ item = &rdesc->registers[i];
+ if (item->reg == reg)
+ return offset;
+ ++offset;
+ }
+ return -1;
+}
+EXPORT_SYMBOL_GPL(rmi_register_desc_calc_reg_offset);
+
+bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
+ u8 subpacket)
+{
+ return find_next_bit(item->subpacket_map, RMI_REG_DESC_PRESENSE_BITS,
+ subpacket) == subpacket;
+}
+
+/* Indicates that flash programming is enabled (bootloader mode). */
+#define RMI_F01_STATUS_BOOTLOADER(status) (!!((status) & 0x40))
+
+/*
+ * Given the PDT entry for F01, read the device status register to determine
+ * if we're stuck in bootloader mode or not.
+ *
+ */
+static int rmi_check_bootloader_mode(struct rmi_device *rmi_dev,
+ const struct pdt_entry *pdt)
+{
+ int error;
+ u8 device_status;
+
+ error = rmi_read(rmi_dev, pdt->data_base_addr + pdt->page_start,
+ &device_status);
+ if (error) {
+ dev_err(&rmi_dev->dev,
+ "Failed to read device status: %d.\n", error);
+ return error;
+ }
+
+ return RMI_F01_STATUS_BOOTLOADER(device_status);
+}
+
+static int rmi_count_irqs(struct rmi_device *rmi_dev,
+ void *ctx, const struct pdt_entry *pdt)
+{
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ int *irq_count = ctx;
+
+ *irq_count += pdt->interrupt_source_count;
+ if (pdt->function_number == 0x01) {
+ data->f01_bootloader_mode =
+ rmi_check_bootloader_mode(rmi_dev, pdt);
+ if (data->f01_bootloader_mode)
+ dev_warn(&rmi_dev->dev,
+ "WARNING: RMI4 device is in bootloader mode!\n");
+ }
+
+ return RMI_SCAN_CONTINUE;
+}
+
+static int rmi_initial_reset(struct rmi_device *rmi_dev,
+ void *ctx, const struct pdt_entry *pdt)
+{
+ int error;
+
+ if (pdt->function_number == 0x01) {
+ u16 cmd_addr = pdt->page_start + pdt->command_base_addr;
+ u8 cmd_buf = RMI_DEVICE_RESET_CMD;
+ const struct rmi_device_platform_data *pdata =
+ rmi_get_platform_data(rmi_dev);
+
+ if (rmi_dev->xport->ops->reset) {
+ error = rmi_dev->xport->ops->reset(rmi_dev->xport,
+ cmd_addr);
+ if (error)
+ return error;
+
+ return RMI_SCAN_DONE;
+ }
+
+ error = rmi_write_block(rmi_dev, cmd_addr, &cmd_buf, 1);
+ if (error) {
+ dev_err(&rmi_dev->dev,
+ "Initial reset failed. Code = %d.\n", error);
+ return error;
+ }
+
+ mdelay(pdata->reset_delay_ms ?: DEFAULT_RESET_DELAY_MS);
+
+ return RMI_SCAN_DONE;
+ }
+
+ /* F01 should always be on page 0. If we don't find it there, fail. */
+ return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV;
+}
+
+static int rmi_create_function(struct rmi_device *rmi_dev,
+ void *ctx, const struct pdt_entry *pdt)
+{
+ struct device *dev = &rmi_dev->dev;
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+ int *current_irq_count = ctx;
+ struct rmi_function *fn;
+ int i;
+ int error;
+
+ dev_dbg(dev, "Initializing F%02X.\n", pdt->function_number);
+
+ fn = kzalloc(sizeof(struct rmi_function) +
+ BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long),
+ GFP_KERNEL);
+ if (!fn) {
+ dev_err(dev, "Failed to allocate memory for F%02X\n",
+ pdt->function_number);
+ return -ENOMEM;
+ }
+
+ INIT_LIST_HEAD(&fn->node);
+ rmi_driver_copy_pdt_to_fd(pdt, &fn->fd);
+
+ fn->rmi_dev = rmi_dev;
+
+ fn->num_of_irqs = pdt->interrupt_source_count;
+ fn->irq_pos = *current_irq_count;
+ *current_irq_count += fn->num_of_irqs;
+
+ for (i = 0; i < fn->num_of_irqs; i++)
+ set_bit(fn->irq_pos + i, fn->irq_mask);
+
+ error = rmi_register_function(fn);
+ if (error)
+ goto err_put_fn;
+
+ if (pdt->function_number == 0x01)
+ data->f01_container = fn;
+
+ list_add_tail(&fn->node, &data->function_list);
+
+ return RMI_SCAN_CONTINUE;
+
+err_put_fn:
+ put_device(&fn->dev);
+ return error;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rmi_driver_suspend(struct device *dev)
+{
+ struct rmi_driver_data *data;
+ int retval = 0;
+ struct rmi_device *rmi_dev = to_rmi_device(dev);
+
+ data = dev_get_drvdata(&rmi_dev->dev);
+
+ mutex_lock(&data->suspend_mutex);
+
+ if (data->pre_suspend) {
+ retval = data->pre_suspend(data->pm_data);
+ if (retval)
+ goto exit;
+ }
+
+ disable_sensor(rmi_dev);
+
+ if (data->post_suspend)
+ retval = data->post_suspend(data->pm_data);
+
+exit:
+ mutex_unlock(&data->suspend_mutex);
+ return retval;
+}
+
+static int rmi_driver_resume(struct device *dev)
+{
+ struct rmi_driver_data *data;
+ int retval = 0;
+ struct rmi_device *rmi_dev = to_rmi_device(dev);
+
+ data = dev_get_drvdata(&rmi_dev->dev);
+ mutex_lock(&data->suspend_mutex);
+
+ if (data->pre_resume) {
+ retval = data->pre_resume(data->pm_data);
+ if (retval)
+ goto exit;
+ }
+
+ retval = enable_sensor(rmi_dev);
+ if (retval)
+ goto exit;
+
+
+ if (data->post_resume) {
+ retval = data->post_resume(data->pm_data);
+ if (retval)
+ goto exit;
+ }
+
+ data->suspended = false;
+exit:
+ mutex_unlock(&data->suspend_mutex);
+ return retval;
+}
+
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(rmi_driver_pm, rmi_driver_suspend, rmi_driver_resume);
+
+static int rmi_driver_remove(struct device *dev)
+{
+ struct rmi_device *rmi_dev = to_rmi_device(dev);
+
+ disable_sensor(rmi_dev);
+ rmi_free_function_list(rmi_dev);
+
+ return 0;
+}
+
+static int rmi_driver_probe(struct device *dev)
+{
+ struct rmi_driver *rmi_driver;
+ struct rmi_driver_data *data;
+ struct rmi_device_platform_data *pdata;
+ struct rmi_device *rmi_dev;
+ size_t size;
+ void *irq_memory;
+ int irq_count;
+ int retval;
+
+ dev_dbg(dev, "%s: Starting probe.\n", __func__);
+
+ if (!rmi_is_physical_device(dev)) {
+ dev_dbg(dev, "Not a physical device.\n");
+ return -ENODEV;
+ }
+
+ rmi_dev = to_rmi_device(dev);
+ rmi_driver = to_rmi_driver(dev->driver);
+ rmi_dev->driver = rmi_driver;
+
+ pdata = rmi_get_platform_data(rmi_dev);
+
+ data = devm_kzalloc(dev, sizeof(struct rmi_driver_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&data->function_list);
+ data->rmi_dev = rmi_dev;
+ dev_set_drvdata(&rmi_dev->dev, data);
+
+ /*
+ * Right before a warm boot, the sensor might be in some unusual state,
+ * such as F54 diagnostics, or F34 bootloader mode after a firmware
+ * or configuration update. In order to clear the sensor to a known
+ * state and/or apply any updates, we issue a initial reset to clear any
+ * previous settings and force it into normal operation.
+ *
+ * We have to do this before actually building the PDT because
+ * the reflash updates (if any) might cause various registers to move
+ * around.
+ *
+ * For a number of reasons, this initial reset may fail to return
+ * within the specified time, but we'll still be able to bring up the
+ * driver normally after that failure. This occurs most commonly in
+ * a cold boot situation (where then firmware takes longer to come up
+ * than from a warm boot) and the reset_delay_ms in the platform data
+ * has been set too short to accommodate that. Since the sensor will
+ * eventually come up and be usable, we don't want to just fail here
+ * and leave the customer's device unusable. So we warn them, and
+ * continue processing.
+ */
+ retval = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset);
+ if (retval < 0)
+ dev_warn(dev, "RMI initial reset failed! Continuing in spite of this.\n");
+
+ retval = rmi_read(rmi_dev, PDT_PROPERTIES_LOCATION, &data->pdt_props);
+ if (retval < 0) {
+ /*
+ * we'll print out a warning and continue since
+ * failure to get the PDT properties is not a cause to fail
+ */
+ dev_warn(dev, "Could not read PDT properties from %#06x (code %d). Assuming 0x00.\n",
+ PDT_PROPERTIES_LOCATION, retval);
+ }
+
+ /*
+ * We need to count the IRQs and allocate their storage before scanning
+ * the PDT and creating the function entries, because adding a new
+ * function can trigger events that result in the IRQ related storage
+ * being accessed.
+ */
+ dev_dbg(dev, "Counting IRQs.\n");
+ irq_count = 0;
+ retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
+ if (retval < 0) {
+ dev_err(dev, "IRQ counting failed with code %d.\n", retval);
+ goto err;
+ }
+ data->irq_count = irq_count;
+ data->num_of_irq_regs = (data->irq_count + 7) / 8;
+
+ mutex_init(&data->irq_mutex);
+
+ size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
+ irq_memory = devm_kzalloc(dev, size * 4, GFP_KERNEL);
+ if (!irq_memory) {
+ dev_err(dev, "Failed to allocate memory for irq masks.\n");
+ goto err;
+ }
+
+ data->irq_status = irq_memory + size * 0;
+ data->fn_irq_bits = irq_memory + size * 1;
+ data->current_irq_mask = irq_memory + size * 2;
+ data->new_irq_mask = irq_memory + size * 3;
+
+ if (rmi_dev->xport->input) {
+ /*
+ * The transport driver already has an input device.
+ * In some cases it is preferable to reuse the transport
+ * devices input device instead of creating a new one here.
+ * One example is some HID touchpads report "pass-through"
+ * button events are not reported by rmi registers.
+ */
+ data->input = rmi_dev->xport->input;
+ } else {
+ data->input = devm_input_allocate_device(dev);
+ if (!data->input) {
+ dev_err(dev, "%s: Failed to allocate input device.\n",
+ __func__);
+ retval = -ENOMEM;
+ goto err_destroy_functions;
+ }
+ rmi_driver_set_input_params(rmi_dev, data->input);
+ data->input->phys = devm_kasprintf(dev, GFP_KERNEL,
+ "%s/input0", dev_name(dev));
+ }
+
+ irq_count = 0;
+ dev_dbg(dev, "Creating functions.");
+ retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
+ if (retval < 0) {
+ dev_err(dev, "Function creation failed with code %d.\n",
+ retval);
+ goto err_destroy_functions;
+ }
+
+ if (!data->f01_container) {
+ dev_err(dev, "Missing F01 container!\n");
+ retval = -EINVAL;
+ goto err_destroy_functions;
+ }
+
+ retval = rmi_read_block(rmi_dev,
+ data->f01_container->fd.control_base_addr + 1,
+ data->current_irq_mask, data->num_of_irq_regs);
+ if (retval < 0) {
+ dev_err(dev, "%s: Failed to read current IRQ mask.\n",
+ __func__);
+ goto err_destroy_functions;
+ }
+
+#ifdef CONFIG_PM_SLEEP
+ data->pm_data = pdata->pm_data;
+ data->pre_suspend = pdata->pre_suspend;
+ data->post_suspend = pdata->post_suspend;
+ data->pre_resume = pdata->pre_resume;
+ data->post_resume = pdata->post_resume;
+
+ mutex_init(&data->suspend_mutex);
+#endif
+
+ if (data->input) {
+ rmi_driver_set_input_name(rmi_dev, data->input);
+ if (!rmi_dev->xport->input) {
+ if (input_register_device(data->input)) {
+ dev_err(dev, "%s: Failed to register input device.\n",
+ __func__);
+ goto err_destroy_functions;
+ }
+ }
+ }
+
+ if (rmi_dev->xport->irq > 0)
+ if (!rmi_dev->xport->hard_irq)
+ rmi_dev->xport->irq_flags |= IRQF_ONESHOT;
+
+ if (data->f01_container->dev.driver)
+ /* Driver already bound, so enable ATTN now. */
+ return enable_sensor(rmi_dev);
+
+ return 0;
+
+err_destroy_functions:
+ rmi_free_function_list(rmi_dev);
+err:
+ return retval < 0 ? retval : 0;
+}
+
+static struct rmi_driver rmi_physical_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rmi_physical",
+ .bus = &rmi_bus_type,
+ .pm = &rmi_driver_pm,
+ .probe = rmi_driver_probe,
+ .remove = rmi_driver_remove,
+ },
+ .irq_handler = rmi_driver_irq_handler,
+ .reset_handler = rmi_driver_reset_handler,
+ .clear_irq_bits = rmi_driver_clear_irq_bits,
+ .set_irq_bits = rmi_driver_set_irq_bits,
+ .set_input_params = rmi_driver_set_input_params,
+};
+
+bool rmi_is_physical_driver(struct device_driver *drv)
+{
+ return drv == &rmi_physical_driver.driver;
+}
+
+int __init rmi_register_physical_driver(void)
+{
+ int error;
+
+ error = driver_register(&rmi_physical_driver.driver);
+ if (error) {
+ pr_err("%s: driver register failed, code=%d.\n", __func__,
+ error);
+ return error;
+ }
+
+ return 0;
+}
+
+void __exit rmi_unregister_physical_driver(void)
+{
+ driver_unregister(&rmi_physical_driver.driver);
+}
new file mode 100644
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _RMI_DRIVER_H
+#define _RMI_DRIVER_H
+
+#include <linux/ctype.h>
+#include <linux/hrtimer.h>
+#include <linux/ktime.h>
+#include <linux/input.h>
+#include "rmi_bus.h"
+
+#define RMI_DRIVER_VERSION "2.0"
+
+#define SYNAPTICS_INPUT_DEVICE_NAME "Synaptics RMI4 Touch Sensor"
+#define SYNAPTICS_VENDOR_ID 0x06cb
+
+#define GROUP(_attrs) { \
+ .attrs = _attrs, \
+}
+
+#define PDT_PROPERTIES_LOCATION 0x00EF
+#define BSR_LOCATION 0x00FE
+
+#define RMI_PDT_PROPS_HAS_BSR 0x02
+
+#define NAME_BUFFER_SIZE 256
+
+#define RMI_PDT_ENTRY_SIZE 6
+#define RMI_PDT_FUNCTION_VERSION_MASK 0x60
+#define RMI_PDT_INT_SOURCE_COUNT_MASK 0x07
+
+#define PDT_START_SCAN_LOCATION 0x00e9
+#define PDT_END_SCAN_LOCATION 0x0005
+#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff)
+
+struct pdt_entry {
+ u16 page_start;
+ u8 query_base_addr;
+ u8 command_base_addr;
+ u8 control_base_addr;
+ u8 data_base_addr;
+ u8 interrupt_source_count;
+ u8 function_version;
+ u8 function_number;
+};
+
+int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry,
+ u16 pdt_address);
+
+#define RMI_REG_DESC_PRESENSE_BITS (32 * BITS_PER_BYTE)
+#define RMI_REG_DESC_SUBPACKET_BITS (37 * BITS_PER_BYTE)
+
+/* describes a single packet register */
+struct rmi_register_desc_item {
+ u16 reg;
+ unsigned long reg_size;
+ u8 num_subpackets;
+ unsigned long subpacket_map[BITS_TO_LONGS(
+ RMI_REG_DESC_SUBPACKET_BITS)];
+};
+
+/*
+ * describes the packet registers for a particular type
+ * (ie query, control, data)
+ */
+struct rmi_register_descriptor {
+ unsigned long struct_size;
+ unsigned long presense_map[BITS_TO_LONGS(RMI_REG_DESC_PRESENSE_BITS)];
+ u8 num_registers;
+ struct rmi_register_desc_item *registers;
+};
+
+int rmi_read_register_desc(struct rmi_device *d, u16 addr,
+ struct rmi_register_descriptor *rdesc);
+const struct rmi_register_desc_item *rmi_get_register_desc_item(
+ struct rmi_register_descriptor *rdesc, u16 reg);
+
+/*
+ * Calculate the total size of all of the registers described in the
+ * descriptor.
+ */
+size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc);
+int rmi_register_desc_calc_reg_offset(
+ struct rmi_register_descriptor *rdesc, u16 reg);
+bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
+ u8 subpacket);
+
+bool rmi_is_physical_driver(struct device_driver *);
+int rmi_register_physical_driver(void);
+void rmi_unregister_physical_driver(void);
+
+int rmi_register_f01_handler(void);
+void rmi_unregister_f01_handler(void);
+char *rmi_f01_get_product_ID(struct rmi_function *fn);
+#endif
new file mode 100644
@@ -0,0 +1,570 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kconfig.h>
+#include <linux/rmi.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/of.h>
+#include "rmi_driver.h"
+
+#define RMI_PRODUCT_ID_LENGTH 10
+#define RMI_PRODUCT_INFO_LENGTH 2
+
+#define RMI_DATE_CODE_LENGTH 3
+
+#define PRODUCT_ID_OFFSET 0x10
+#define PRODUCT_INFO_OFFSET 0x1E
+
+
+/* Force a firmware reset of the sensor */
+#define RMI_F01_CMD_DEVICE_RESET 1
+
+/* Various F01_RMI_QueryX bits */
+
+#define RMI_F01_QRY1_CUSTOM_MAP (1 << 0)
+#define RMI_F01_QRY1_NON_COMPLIANT (1 << 1)
+#define RMI_F01_QRY1_HAS_LTS (1 << 2)
+#define RMI_F01_QRY1_HAS_SENSOR_ID (1 << 3)
+#define RMI_F01_QRY1_HAS_CHARGER_INP (1 << 4)
+#define RMI_F01_QRY1_HAS_ADJ_DOZE (1 << 5)
+#define RMI_F01_QRY1_HAS_ADJ_DOZE_HOFF (1 << 6)
+#define RMI_F01_QRY1_HAS_PROPS_2 (1 << 7)
+
+#define RMI_F01_QRY5_YEAR_MASK 0x1f
+#define RMI_F01_QRY6_MONTH_MASK 0x0f
+#define RMI_F01_QRY7_DAY_MASK 0x1f
+
+#define RMI_F01_QRY2_PRODINFO_MASK 0x7f
+
+#define RMI_F01_BASIC_QUERY_LEN 21 /* From Query 00 through 20 */
+
+struct f01_basic_properties {
+ u8 manufacturer_id;
+ bool has_lts;
+ bool has_adjustable_doze;
+ bool has_adjustable_doze_holdoff;
+ char dom[11]; /* YYYY/MM/DD + '\0' */
+ u8 product_id[RMI_PRODUCT_ID_LENGTH + 1];
+ u16 productinfo;
+};
+
+/* F01 device status bits */
+
+/* Most recent device status event */
+#define RMI_F01_STATUS_CODE(status) ((status) & 0x0f)
+/* The device has lost its configuration for some reason. */
+#define RMI_F01_STATUS_UNCONFIGURED(status) (!!((status) & 0x80))
+
+/* Control register bits */
+
+/*
+ * Sleep mode controls power management on the device and affects all
+ * functions of the device.
+ */
+#define RMI_F01_CTRL0_SLEEP_MODE_MASK 0x03
+
+#define RMI_SLEEP_MODE_NORMAL 0x00
+#define RMI_SLEEP_MODE_SENSOR_SLEEP 0x01
+#define RMI_SLEEP_MODE_RESERVED0 0x02
+#define RMI_SLEEP_MODE_RESERVED1 0x03
+
+/*
+ * This bit disables whatever sleep mode may be selected by the sleep_mode
+ * field and forces the device to run at full power without sleeping.
+ */
+#define RMI_F01_CRTL0_NOSLEEP_BIT (1 << 2)
+
+/*
+ * When this bit is set, the touch controller employs a noise-filtering
+ * algorithm designed for use with a connected battery charger.
+ */
+#define RMI_F01_CRTL0_CHARGER_BIT (1 << 5)
+
+/*
+ * Sets the report rate for the device. The effect of this setting is
+ * highly product dependent. Check the spec sheet for your particular
+ * touch sensor.
+ */
+#define RMI_F01_CRTL0_REPORTRATE_BIT (1 << 6)
+
+/*
+ * Written by the host as an indicator that the device has been
+ * successfully configured.
+ */
+#define RMI_F01_CRTL0_CONFIGURED_BIT (1 << 7)
+
+/**
+ * @ctrl0 - see the bit definitions above.
+ * @doze_interval - controls the interval between checks for finger presence
+ * when the touch sensor is in doze mode, in units of 10ms.
+ * @wakeup_threshold - controls the capacitance threshold at which the touch
+ * sensor will decide to wake up from that low power state.
+ * @doze_holdoff - controls how long the touch sensor waits after the last
+ * finger lifts before entering the doze state, in units of 100ms.
+ */
+struct f01_device_control {
+ u8 ctrl0;
+ u8 doze_interval;
+ u8 wakeup_threshold;
+ u8 doze_holdoff;
+};
+
+struct f01_data {
+ struct f01_basic_properties properties;
+
+ struct f01_device_control device_control;
+
+ u16 doze_interval_addr;
+ u16 wakeup_threshold_addr;
+ u16 doze_holdoff_addr;
+
+#ifdef CONFIG_PM_SLEEP
+ bool suspended;
+ bool old_nosleep;
+#endif
+
+ unsigned int num_of_irq_regs;
+};
+
+static int rmi_f01_read_properties(struct rmi_device *rmi_dev,
+ u16 query_base_addr,
+ struct f01_basic_properties *props)
+{
+ u8 basic_query[RMI_F01_BASIC_QUERY_LEN];
+ int error;
+
+ error = rmi_read_block(rmi_dev, query_base_addr,
+ basic_query, sizeof(basic_query));
+ if (error) {
+ dev_err(&rmi_dev->dev,
+ "Failed to read device query registers: %d\n", error);
+ return error;
+ }
+
+ /* Now parse what we got */
+ props->manufacturer_id = basic_query[0];
+
+ props->has_lts = basic_query[1] & RMI_F01_QRY1_HAS_LTS;
+ props->has_adjustable_doze =
+ basic_query[1] & RMI_F01_QRY1_HAS_ADJ_DOZE;
+ props->has_adjustable_doze_holdoff =
+ basic_query[1] & RMI_F01_QRY1_HAS_ADJ_DOZE_HOFF;
+
+ snprintf(props->dom, sizeof(props->dom), "20%02d/%02d/%02d",
+ basic_query[5] & RMI_F01_QRY5_YEAR_MASK,
+ basic_query[6] & RMI_F01_QRY6_MONTH_MASK,
+ basic_query[7] & RMI_F01_QRY7_DAY_MASK);
+
+ memcpy(props->product_id, &basic_query[11],
+ RMI_PRODUCT_ID_LENGTH);
+ props->product_id[RMI_PRODUCT_ID_LENGTH] = '\0';
+
+ props->productinfo =
+ ((basic_query[2] & RMI_F01_QRY2_PRODINFO_MASK) << 7) |
+ (basic_query[3] & RMI_F01_QRY2_PRODINFO_MASK);
+
+ return 0;
+}
+
+char *rmi_f01_get_product_ID(struct rmi_function *fn)
+{
+ struct f01_data *f01 = dev_get_drvdata(&fn->dev);
+
+ return f01->properties.product_id;
+}
+
+#ifdef CONFIG_OF
+static int rmi_f01_of_probe(struct device *dev,
+ struct rmi_device_platform_data *pdata)
+{
+ int retval;
+
+ retval = rmi_of_property_read_u32(dev,
+ (u32 *)&pdata->power_management.nosleep,
+ "syna,nosleep-mode", 1);
+ if (retval)
+ return retval;
+
+ retval = rmi_of_property_read_u8(dev,
+ &pdata->power_management.wakeup_threshold,
+ "syna,wakeup-threshold", 1);
+ if (retval)
+ return retval;
+
+ retval = rmi_of_property_read_u8(dev,
+ &pdata->power_management.doze_holdoff,
+ "syna,doze-holdoff", 1);
+ if (retval)
+ return retval;
+
+ retval = rmi_of_property_read_u8(dev,
+ &pdata->power_management.doze_interval,
+ "syna,doze-interval", 1);
+ if (retval)
+ return retval;
+
+ return 0;
+}
+#else
+static inline int rmi_f01_of_probe(struct device *dev,
+ struct rmi_device_platform_data *pdata)
+{
+ return -ENODEV;
+}
+#endif
+
+static int rmi_f01_probe(struct rmi_function *fn)
+{
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ struct rmi_driver_data *driver_data = dev_get_drvdata(&rmi_dev->dev);
+ struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
+ struct f01_data *f01;
+ int error;
+ u16 ctrl_base_addr = fn->fd.control_base_addr;
+ u8 device_status;
+ u8 temp;
+ int retval;
+
+ if (fn->dev.of_node) {
+ retval = rmi_f01_of_probe(&fn->dev, pdata);
+ if (retval)
+ return retval;
+ }
+
+ f01 = devm_kzalloc(&fn->dev, sizeof(struct f01_data), GFP_KERNEL);
+ if (!f01)
+ return -ENOMEM;
+
+ f01->num_of_irq_regs = driver_data->num_of_irq_regs;
+
+ /*
+ * Set the configured bit and (optionally) other important stuff
+ * in the device control register.
+ */
+
+ error = rmi_read(rmi_dev, fn->fd.control_base_addr,
+ &f01->device_control.ctrl0);
+ if (error) {
+ dev_err(&fn->dev, "Failed to read F01 control: %d\n", error);
+ return error;
+ }
+
+ switch (pdata->power_management.nosleep) {
+ case RMI_F01_NOSLEEP_DEFAULT:
+ break;
+ case RMI_F01_NOSLEEP_OFF:
+ f01->device_control.ctrl0 &= ~RMI_F01_CRTL0_NOSLEEP_BIT;
+ break;
+ case RMI_F01_NOSLEEP_ON:
+ f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT;
+ break;
+ }
+
+ /*
+ * Sleep mode might be set as a hangover from a system crash or
+ * reboot without power cycle. If so, clear it so the sensor
+ * is certain to function.
+ */
+ if ((f01->device_control.ctrl0 & RMI_F01_CTRL0_SLEEP_MODE_MASK) !=
+ RMI_SLEEP_MODE_NORMAL) {
+ dev_warn(&fn->dev,
+ "WARNING: Non-zero sleep mode found. Clearing...\n");
+ f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
+ }
+
+ f01->device_control.ctrl0 |= RMI_F01_CRTL0_CONFIGURED_BIT;
+
+ error = rmi_write(rmi_dev, fn->fd.control_base_addr,
+ f01->device_control.ctrl0);
+ if (error) {
+ dev_err(&fn->dev, "Failed to write F01 control: %d\n", error);
+ return error;
+ }
+
+ /* Dummy read in order to clear irqs */
+ error = rmi_read(rmi_dev, fn->fd.data_base_addr + 1, &temp);
+ if (error < 0) {
+ dev_err(&fn->dev, "Failed to read Interrupt Status.\n");
+ return error;
+ }
+
+ error = rmi_f01_read_properties(rmi_dev, fn->fd.query_base_addr,
+ &f01->properties);
+ if (error < 0) {
+ dev_err(&fn->dev, "Failed to read F01 properties.\n");
+ return error;
+ }
+
+ dev_info(&fn->dev, "found RMI device, manufacturer: %s, product: %s\n",
+ f01->properties.manufacturer_id == 1 ? "Synaptics" : "unknown",
+ f01->properties.product_id);
+
+ /* Advance to interrupt control registers, then skip over them. */
+ ctrl_base_addr++;
+ ctrl_base_addr += f01->num_of_irq_regs;
+
+ /* read control register */
+ if (f01->properties.has_adjustable_doze) {
+ f01->doze_interval_addr = ctrl_base_addr;
+ ctrl_base_addr++;
+
+ if (pdata->power_management.doze_interval) {
+ f01->device_control.doze_interval =
+ pdata->power_management.doze_interval;
+ error = rmi_write(rmi_dev, f01->doze_interval_addr,
+ f01->device_control.doze_interval);
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to configure F01 doze interval register: %d\n",
+ error);
+ return error;
+ }
+ } else {
+ error = rmi_read(rmi_dev, f01->doze_interval_addr,
+ &f01->device_control.doze_interval);
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to read F01 doze interval register: %d\n",
+ error);
+ return error;
+ }
+ }
+
+ f01->wakeup_threshold_addr = ctrl_base_addr;
+ ctrl_base_addr++;
+
+ if (pdata->power_management.wakeup_threshold) {
+ f01->device_control.wakeup_threshold =
+ pdata->power_management.wakeup_threshold;
+ error = rmi_write(rmi_dev, f01->wakeup_threshold_addr,
+ f01->device_control.wakeup_threshold);
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to configure F01 wakeup threshold register: %d\n",
+ error);
+ return error;
+ }
+ } else {
+ error = rmi_read(rmi_dev, f01->wakeup_threshold_addr,
+ &f01->device_control.wakeup_threshold);
+ if (error < 0) {
+ dev_err(&fn->dev,
+ "Failed to read F01 wakeup threshold register: %d\n",
+ error);
+ return error;
+ }
+ }
+ }
+
+ if (f01->properties.has_lts)
+ ctrl_base_addr++;
+
+ if (f01->properties.has_adjustable_doze_holdoff) {
+ f01->doze_holdoff_addr = ctrl_base_addr;
+ ctrl_base_addr++;
+
+ if (pdata->power_management.doze_holdoff) {
+ f01->device_control.doze_holdoff =
+ pdata->power_management.doze_holdoff;
+ error = rmi_write(rmi_dev, f01->doze_holdoff_addr,
+ f01->device_control.doze_holdoff);
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to configure F01 doze holdoff register: %d\n",
+ error);
+ return error;
+ }
+ } else {
+ error = rmi_read(rmi_dev, f01->doze_holdoff_addr,
+ &f01->device_control.doze_holdoff);
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to read F01 doze holdoff register: %d\n",
+ error);
+ return error;
+ }
+ }
+ }
+
+ error = rmi_read(rmi_dev, fn->fd.data_base_addr, &device_status);
+ if (error < 0) {
+ dev_err(&fn->dev,
+ "Failed to read device status: %d\n", error);
+ return error;
+ }
+
+ if (RMI_F01_STATUS_UNCONFIGURED(device_status)) {
+ dev_err(&fn->dev,
+ "Device was reset during configuration process, status: %#02x!\n",
+ RMI_F01_STATUS_CODE(device_status));
+ return -EINVAL;
+ }
+
+ dev_set_drvdata(&fn->dev, f01);
+
+ return 0;
+}
+
+static int rmi_f01_config(struct rmi_function *fn)
+{
+ struct f01_data *f01 = dev_get_drvdata(&fn->dev);
+ int error;
+
+ error = rmi_write(fn->rmi_dev, fn->fd.control_base_addr,
+ f01->device_control.ctrl0);
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to write device_control register: %d\n", error);
+ return error;
+ }
+
+ if (f01->properties.has_adjustable_doze) {
+ error = rmi_write(fn->rmi_dev, f01->doze_interval_addr,
+ f01->device_control.doze_interval);
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to write doze interval: %d\n", error);
+ return error;
+ }
+
+ error = rmi_write_block(fn->rmi_dev,
+ f01->wakeup_threshold_addr,
+ &f01->device_control.wakeup_threshold,
+ sizeof(u8));
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to write wakeup threshold: %d\n",
+ error);
+ return error;
+ }
+ }
+
+ if (f01->properties.has_adjustable_doze_holdoff) {
+ error = rmi_write(fn->rmi_dev, f01->doze_holdoff_addr,
+ f01->device_control.doze_holdoff);
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to write doze holdoff: %d\n", error);
+ return error;
+ }
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rmi_f01_suspend(struct device *dev)
+{
+ struct rmi_function *fn = to_rmi_function(dev);
+ struct f01_data *f01 = dev_get_drvdata(&fn->dev);
+ int error;
+
+ f01->old_nosleep =
+ f01->device_control.ctrl0 & RMI_F01_CRTL0_NOSLEEP_BIT;
+ f01->device_control.ctrl0 &= ~RMI_F01_CRTL0_NOSLEEP_BIT;
+
+ f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
+ if (device_may_wakeup(fn->rmi_dev->xport->dev))
+ f01->device_control.ctrl0 |= RMI_SLEEP_MODE_RESERVED1;
+ else
+ f01->device_control.ctrl0 |= RMI_SLEEP_MODE_SENSOR_SLEEP;
+
+ error = rmi_write(fn->rmi_dev, fn->fd.control_base_addr,
+ f01->device_control.ctrl0);
+ if (error) {
+ dev_err(&fn->dev, "Failed to write sleep mode: %d.\n", error);
+ if (f01->old_nosleep)
+ f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT;
+ f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
+ f01->device_control.ctrl0 |= RMI_SLEEP_MODE_NORMAL;
+ return error;
+ }
+
+ return 0;
+}
+
+static int rmi_f01_resume(struct device *dev)
+{
+ struct rmi_function *fn = to_rmi_function(dev);
+ struct f01_data *f01 = dev_get_drvdata(&fn->dev);
+ int error;
+
+ if (f01->old_nosleep)
+ f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT;
+
+ f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
+ f01->device_control.ctrl0 |= RMI_SLEEP_MODE_NORMAL;
+
+ error = rmi_write(fn->rmi_dev, fn->fd.control_base_addr,
+ f01->device_control.ctrl0);
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to restore normal operation: %d.\n", error);
+ return error;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(rmi_f01_pm_ops, rmi_f01_suspend, rmi_f01_resume);
+
+static int rmi_f01_attention(struct rmi_function *fn,
+ unsigned long *irq_bits)
+{
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ int error;
+ u8 device_status;
+
+ error = rmi_read(rmi_dev, fn->fd.data_base_addr, &device_status);
+ if (error) {
+ dev_err(&fn->dev,
+ "Failed to read device status: %d.\n", error);
+ return error;
+ }
+
+ if (RMI_F01_STATUS_UNCONFIGURED(device_status)) {
+ dev_warn(&fn->dev, "Device reset detected.\n");
+ error = rmi_dev->driver->reset_handler(rmi_dev);
+ if (error) {
+ dev_err(&fn->dev, "Device reset failed: %d\n", error);
+ return error;
+ }
+ }
+
+ return 0;
+}
+
+static struct rmi_function_handler rmi_f01_handler = {
+ .driver = {
+ .name = "rmi_f01",
+ .pm = &rmi_f01_pm_ops,
+ /*
+ * Do not allow user unbinding F01 as it is critical
+ * function.
+ */
+ .suppress_bind_attrs = true,
+ },
+ .func = 0x01,
+ .probe = rmi_f01_probe,
+ .config = rmi_f01_config,
+ .attention = rmi_f01_attention,
+};
+
+int __init rmi_register_f01_handler(void)
+{
+ return rmi_register_function_handler(&rmi_f01_handler);
+}
+
+void rmi_unregister_f01_handler(void)
+{
+ rmi_unregister_function_handler(&rmi_f01_handler);
+}
new file mode 100644
@@ -0,0 +1,263 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _RMI_H
+#define _RMI_H
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#define NAME_BUFFER_SIZE 256
+
+/**
+ * struct rmi_f01_power - override default power management settings.
+ *
+ */
+enum rmi_f01_nosleep {
+ RMI_F01_NOSLEEP_DEFAULT = 0,
+ RMI_F01_NOSLEEP_OFF = 1,
+ RMI_F01_NOSLEEP_ON = 2
+};
+
+/**
+ * struct rmi_f01_power_management -When non-zero, these values will be written
+ * to the touch sensor to override the default firmware settigns. For a
+ * detailed explanation of what each field does, see the corresponding
+ * documention in the RMI4 specification.
+ *
+ * @nosleep - specifies whether the device is permitted to sleep or doze (that
+ * is, enter a temporary low power state) when no fingers are touching the
+ * sensor.
+ * @wakeup_threshold - controls the capacitance threshold at which the touch
+ * sensor will decide to wake up from that low power state.
+ * @doze_holdoff - controls how long the touch sensor waits after the last
+ * finger lifts before entering the doze state, in units of 100ms.
+ * @doze_interval - controls the interval between checks for finger presence
+ * when the touch sensor is in doze mode, in units of 10ms.
+ */
+struct rmi_f01_power_management {
+ enum rmi_f01_nosleep nosleep;
+ u8 wakeup_threshold;
+ u8 doze_holdoff;
+ u8 doze_interval;
+};
+
+/**
+ * struct rmi_device_platform_data - system specific configuration info.
+ *
+ * @irq_flags - this is used to specify intrerrupt type flags.
+ *
+ * @reset_delay_ms - after issuing a reset command to the touch sensor, the
+ * driver waits a few milliseconds to give the firmware a chance to
+ * to re-initialize. You can override the default wait period here.
+ *
+ *
+ * @pre_suspend - this will be called before any other suspend operations are
+ * done.
+ * @power_management - overrides default touch sensor doze mode settings (see
+ * above)
+ *
+ * @post_suspend - this will be called after all suspend operations are
+ * completed. This is the ONLY safe place to power off an RMI sensor
+ * during the suspend process.
+ * @pre_resume - this is called before any other resume operations. If you
+ * powered off the RMI4 sensor in post_suspend(), then you MUST power it back
+ * here, and you MUST wait an appropriate time for the ASIC to come up
+ * (100ms to 200ms, depending on the sensor) before returning.
+ * @pm_data - this will be passed to the various (pre|post)_(suspend/resume)
+ * functions.
+ */
+struct rmi_device_platform_data {
+ int irq_flags;
+
+ int reset_delay_ms;
+
+ /* function handler pdata */
+ struct rmi_f01_power_management power_management;
+
+#ifdef CONFIG_PM
+ void *pm_data;
+ int (*pre_suspend)(const void *pm_data);
+ int (*post_suspend)(const void *pm_data);
+ int (*pre_resume)(const void *pm_data);
+ int (*post_resume)(const void *pm_data);
+#endif
+};
+
+/**
+ * struct rmi_function_descriptor - RMI function base addresses
+ *
+ * @query_base_addr: The RMI Query base address
+ * @command_base_addr: The RMI Command base address
+ * @control_base_addr: The RMI Control base address
+ * @data_base_addr: The RMI Data base address
+ * @interrupt_source_count: The number of irqs this RMI function needs
+ * @function_number: The RMI function number
+ *
+ * This struct is used when iterating the Page Description Table. The addresses
+ * are 16-bit values to include the current page address.
+ *
+ */
+struct rmi_function_descriptor {
+ u16 query_base_addr;
+ u16 command_base_addr;
+ u16 control_base_addr;
+ u16 data_base_addr;
+ u8 interrupt_source_count;
+ u8 function_number;
+ u8 function_version;
+};
+
+struct rmi_device;
+
+/**
+ * struct rmi_transport_dev - represent an RMI transport device
+ *
+ * @dev: Pointer to the communication device, e.g. i2c or spi
+ * @rmi_dev: Pointer to the RMI device
+ * @irq_thread: if not NULL, the sensor driver will use this instead of the
+ * default irq_thread implementation.
+ * @hard_irq: if not NULL, the sensor driver will use this for the hard IRQ
+ * handling
+ * @proto_name: name of the transport protocol (SPI, i2c, etc)
+ * @ops: pointer to transport operations implementation
+ *
+ * The RMI transport device implements the glue between different communication
+ * buses such as I2C and SPI.
+ *
+ */
+struct rmi_transport_dev {
+ struct device *dev;
+ struct rmi_device *rmi_dev;
+
+ int irq;
+ int irq_flags;
+
+ irqreturn_t (*irq_thread)(int irq, void *p);
+ irqreturn_t (*hard_irq)(int irq, void *p);
+
+ const char *proto_name;
+ const struct rmi_transport_ops *ops;
+
+ struct rmi_device_platform_data pdata;
+
+ struct input_dev *input;
+
+ void *attn_data;
+ int attn_size;
+};
+
+/**
+ * struct rmi_transport_ops - defines transport protocol operations.
+ *
+ * @write_block: Writing a block of data to the specified address
+ * @read_block: Read a block of data from the specified address.
+ */
+struct rmi_transport_ops {
+ int (*write_block)(struct rmi_transport_dev *xport, u16 addr,
+ const void *buf, size_t len);
+ int (*read_block)(struct rmi_transport_dev *xport, u16 addr,
+ void *buf, size_t len);
+
+ int (*enable_device)(struct rmi_transport_dev *xport);
+ void (*disable_device)(struct rmi_transport_dev *xport);
+ int (*reset)(struct rmi_transport_dev *xport, u16 reset_addr);
+};
+
+/**
+ * struct rmi_driver - driver for an RMI4 sensor on the RMI bus.
+ *
+ * @driver: Device driver model driver
+ * @irq_handler: Callback for handling irqs
+ * @reset_handler: Called when a reset is detected.
+ * @clear_irq_bits: Clear the specified bits in the current interrupt mask.
+ * @set_irq_bist: Set the specified bits in the current interrupt mask.
+ * @store_productid: Callback for cache product id from function 01
+ * @data: Private data pointer
+ *
+ */
+struct rmi_driver {
+ struct device_driver driver;
+
+ int (*irq_handler)(struct rmi_device *rmi_dev, int irq);
+ int (*reset_handler)(struct rmi_device *rmi_dev);
+ int (*clear_irq_bits)(struct rmi_device *rmi_dev, unsigned long *mask);
+ int (*set_irq_bits)(struct rmi_device *rmi_dev, unsigned long *mask);
+ int (*store_productid)(struct rmi_device *rmi_dev);
+ int (*set_input_params)(struct rmi_device *rmi_dev,
+ struct input_dev *input);
+ void *data;
+};
+
+/**
+ * struct rmi_device - represents an RMI4 sensor device on the RMI bus.
+ *
+ * @dev: The device created for the RMI bus
+ * @number: Unique number for the device on the bus.
+ * @driver: Pointer to associated driver
+ * @xport: Pointer to the transport interface
+ *
+ */
+struct rmi_device {
+ struct device dev;
+ int number;
+
+ struct rmi_driver *driver;
+ struct rmi_transport_dev *xport;
+
+};
+
+struct rmi_driver_data {
+ struct list_head function_list;
+
+ struct rmi_device *rmi_dev;
+
+ struct rmi_function *f01_container;
+ bool f01_bootloader_mode;
+
+ u32 attn_count;
+ bool polling;
+ int irq;
+ int irq_flags;
+ int num_of_irq_regs;
+ int irq_count;
+ unsigned long *irq_status;
+ unsigned long *fn_irq_bits;
+ unsigned long *current_irq_mask;
+ unsigned long *new_irq_mask;
+ struct mutex irq_mutex;
+ struct input_dev *input;
+
+ u8 pdt_props;
+ u8 bsr;
+
+ bool enabled;
+#ifdef CONFIG_PM_SLEEP
+ bool suspended;
+ struct mutex suspend_mutex;
+
+ void *pm_data;
+ int (*pre_suspend)(const void *pm_data);
+ int (*post_suspend)(const void *pm_data);
+ int (*pre_resume)(const void *pm_data);
+ int (*post_resume)(const void *pm_data);
+#endif
+
+ void *data;
+};
+
+int rmi_register_transport_device(struct rmi_transport_dev *xport);
+void rmi_unregister_transport_device(struct rmi_transport_dev *xport);
+int rmi_process_interrupt_requests(struct rmi_device *rmi_dev);
+
+#endif
@@ -972,6 +972,7 @@ struct input_keymap_entry {
#define BUS_GSC 0x1A
#define BUS_ATARI 0x1B
#define BUS_SPI 0x1C
+#define BUS_RMI 0x1D
/*
* MT_TOOL types