| Message ID | 1450101234-2191-2-git-send-email-mpa@pengutronix.de (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Mon, 14 Dec 2015, Markus Pargmann wrote: > This documentation describes the devicetree bindings for the > ADC/Touchscreen unit of the i.MX25 SoC. > > Signed-off-by: Markus Pargmann <mpa@pengutronix.de> > Acked-by: Jonathan Cameron <jic23@kernel.org> > Acked-by: Rob Herring <robh@kernel.org> > --- > > Notes: > Changes in v9: > - Fixed some style things. > > Changes in v6: > - Removed adc-ref property and replaced it with refp and refn for positive and > negative references. The properties are optional now as the default > behaviour is a positive internal reference voltage and ADC GND as negative > reference. > > .../devicetree/bindings/mfd/fsl-imx25-tsadc.txt | 47 ++++++++++++++++++++++ > 1 file changed, 47 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt Binding looks fine, but you need to change the subject line of the patch, for is it not an ARM, but MFD patch. > diff --git a/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt > new file mode 100644 > index 000000000000..b03505286997 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt > @@ -0,0 +1,47 @@ > +Freescale MX25 ADC/TSC MultiFunction Device (MFD) > + > +This device combines two general purpose conversion queues one used for general > +ADC and the other used for touchscreens. > + > +Required properties: > + - compatible: Should be "fsl,imx25-tsadc". > + - reg: Start address and size of the memory area of > + the device > + - interrupts: Interrupt for this device > + (See: ../interrupt-controller/interrupts.txt) > + - clocks: An 'ipg' clock (See: ../clock/clock-bindings.txt) > + - interrupt-controller: This device is an interrupt controller. It > + controls the interrupts of both > + conversion queues. > + - #interrupt-cells: Should be '<1>'. > + - #address-cells: Should be '<1>'. > + - #size-cells: Should be '<1>'. > + > +This device includes two conversion queues which can be added as subnodes. > +The first queue is for the touchscreen, the second for general purpose ADC. > + > +Example: > + tscadc: tscadc@50030000 { > + compatible = "fsl,imx25-tsadc"; > + reg = <0x50030000 0xc>; > + interrupts = <46>; > + clocks = <&clks 119>; > + clock-names = "ipg"; > + interrupt-controller; > + #interrupt-cells = <1>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + tsc: tcq@50030400 { > + compatible = "fsl,imx25-tcq"; > + reg = <0x50030400 0x60>; > + ... > + }; > + > + adc: gcq@50030800 { > + compatible = "fsl,imx25-gcq"; > + reg = <0x50030800 0x60>; > + ... > + }; > + };
diff --git a/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt new file mode 100644 index 000000000000..b03505286997 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt @@ -0,0 +1,47 @@ +Freescale MX25 ADC/TSC MultiFunction Device (MFD) + +This device combines two general purpose conversion queues one used for general +ADC and the other used for touchscreens. + +Required properties: + - compatible: Should be "fsl,imx25-tsadc". + - reg: Start address and size of the memory area of + the device + - interrupts: Interrupt for this device + (See: ../interrupt-controller/interrupts.txt) + - clocks: An 'ipg' clock (See: ../clock/clock-bindings.txt) + - interrupt-controller: This device is an interrupt controller. It + controls the interrupts of both + conversion queues. + - #interrupt-cells: Should be '<1>'. + - #address-cells: Should be '<1>'. + - #size-cells: Should be '<1>'. + +This device includes two conversion queues which can be added as subnodes. +The first queue is for the touchscreen, the second for general purpose ADC. + +Example: + tscadc: tscadc@50030000 { + compatible = "fsl,imx25-tsadc"; + reg = <0x50030000 0xc>; + interrupts = <46>; + clocks = <&clks 119>; + clock-names = "ipg"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + tsc: tcq@50030400 { + compatible = "fsl,imx25-tcq"; + reg = <0x50030400 0x60>; + ... + }; + + adc: gcq@50030800 { + compatible = "fsl,imx25-gcq"; + reg = <0x50030800 0x60>; + ... + }; + };