@@ -271,6 +271,15 @@ config MFD_MC13XXX_I2C
help
Select this if your MC13xxx is connected via an I2C bus.
+config MFD_MX25_TSADC
+ tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
+ select REGMAP_MMIO
+ depends on (SOC_IMX25 && OF) || COMPILE_TEST
+ help
+ Enable support for the integrated Touchscreen and ADC unit of the
+ i.MX25 processors. They consist of a conversion queue for general
+ purpose ADC and a queue for Touchscreens.
+
config MFD_HI6421_PMIC
tristate "HiSilicon Hi6421 PMU/Codec IC"
depends on OF
@@ -81,6 +81,8 @@ obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
obj-$(CONFIG_MFD_TWL4030_AUDIO) += twl4030-audio.o
obj-$(CONFIG_TWL6040_CORE) += twl6040.o
+obj-$(CONFIG_MFD_MX25_TSADC) += fsl-imx25-tsadc.o
+
obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o
obj-$(CONFIG_MFD_MC13XXX_SPI) += mc13xxx-spi.o
obj-$(CONFIG_MFD_MC13XXX_I2C) += mc13xxx-i2c.o
new file mode 100644
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdesc.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/mfd/imx25-tsadc.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static struct regmap_config mx25_tsadc_regmap_config = {
+ .fast_io = true,
+ .max_register = 8,
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static void mx25_tsadc_irq_handler(struct irq_desc *desc)
+{
+ struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ u32 status;
+
+ chained_irq_enter(chip, desc);
+
+ regmap_read(tsadc->regs, MX25_TSC_TGSR, &status);
+
+ if (status & MX25_TGSR_GCQ_INT)
+ generic_handle_irq(irq_find_mapping(tsadc->domain, 1));
+
+ if (status & MX25_TGSR_TCQ_INT)
+ generic_handle_irq(irq_find_mapping(tsadc->domain, 0));
+
+ chained_irq_exit(chip, desc);
+}
+
+static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct mx25_tsadc *tsadc = d->host_data;
+
+ irq_set_chip_data(irq, tsadc);
+ irq_set_chip_and_handler(irq, &dummy_irq_chip,
+ handle_level_irq);
+ irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops mx25_tsadc_domain_ops = {
+ .map = mx25_tsadc_domain_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int mx25_tsadc_setup_irq(struct platform_device *pdev,
+ struct mx25_tsadc *tsadc)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ int irq;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "Failed to get irq\n");
+ return irq;
+ }
+
+ tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops,
+ tsadc);
+ if (!tsadc->domain) {
+ dev_err(dev, "Failed to add irq domain\n");
+ return -ENOMEM;
+ }
+
+ irq_set_chained_handler(irq, mx25_tsadc_irq_handler);
+ irq_set_handler_data(irq, tsadc);
+
+ return 0;
+}
+
+static void mx25_tsadc_setup_clk(struct platform_device *pdev,
+ struct mx25_tsadc *tsadc)
+{
+ unsigned clk_div;
+
+ /*
+ * According to the datasheet the ADC clock should never
+ * exceed 1,75 MHz. Base clock is the IPG and the ADC unit uses
+ * a funny clock divider. To keep the ADC conversion time constant
+ * adapt the ADC internal clock divider to the IPG clock rate.
+ */
+
+ dev_dbg(&pdev->dev, "Found master clock at %lu Hz\n",
+ clk_get_rate(tsadc->clk));
+
+ clk_div = DIV_ROUND_UP(clk_get_rate(tsadc->clk), 1750000);
+ dev_dbg(&pdev->dev, "Setting up ADC clock divider to %u\n", clk_div);
+
+ /* adc clock = IPG clock / (2 * div + 2) */
+ clk_div -= 2;
+ clk_div /= 2;
+
+ /*
+ * the ADC clock divider changes its behaviour when values below 4
+ * are used: it is fixed to "/ 10" in this case
+ */
+ clk_div = max_t(unsigned, 4, clk_div);
+
+ dev_dbg(&pdev->dev, "Resulting ADC conversion clock at %lu Hz\n",
+ clk_get_rate(tsadc->clk) / (2 * clk_div + 2));
+
+ regmap_update_bits(tsadc->regs, MX25_TSC_TGCR,
+ MX25_TGCR_ADCCLKCFG(0x1f),
+ MX25_TGCR_ADCCLKCFG(clk_div));
+}
+
+static int mx25_tsadc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct mx25_tsadc *tsadc;
+ struct resource *res;
+ int ret;
+ void __iomem *iomem;
+
+ tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL);
+ if (!tsadc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iomem = devm_ioremap_resource(dev, res);
+ if (IS_ERR(iomem))
+ return PTR_ERR(iomem);
+
+ tsadc->regs = devm_regmap_init_mmio(dev, iomem,
+ &mx25_tsadc_regmap_config);
+ if (IS_ERR(tsadc->regs)) {
+ dev_err(dev, "Failed to initialize regmap\n");
+ return PTR_ERR(tsadc->regs);
+ }
+
+ tsadc->clk = devm_clk_get(dev, "ipg");
+ if (IS_ERR(tsadc->clk)) {
+ dev_err(dev, "Failed to get ipg clock\n");
+ return PTR_ERR(tsadc->clk);
+ }
+
+ /* setup clock according to the datasheet */
+ mx25_tsadc_setup_clk(pdev, tsadc);
+
+ /* Enable clock and reset the component */
+ regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN,
+ MX25_TGCR_CLK_EN);
+ regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST,
+ MX25_TGCR_TSC_RST);
+
+ /* Setup powersaving mode, but enable internal reference voltage */
+ regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK,
+ MX25_TGCR_POWERMODE_SAVE);
+ regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN,
+ MX25_TGCR_INTREFEN);
+
+ ret = mx25_tsadc_setup_irq(pdev, tsadc);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, tsadc);
+
+ of_platform_populate(np, NULL, NULL, dev);
+
+ return 0;
+}
+
+static const struct of_device_id mx25_tsadc_ids[] = {
+ { .compatible = "fsl,imx25-tsadc" },
+ { /* Sentinel */ }
+};
+
+static struct platform_driver mx25_tsadc_driver = {
+ .driver = {
+ .name = "mx25-tsadc",
+ .of_match_table = of_match_ptr(mx25_tsadc_ids),
+ },
+ .probe = mx25_tsadc_probe,
+};
+module_platform_driver(mx25_tsadc_driver);
+
+MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25");
+MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:mx25-tsadc");
new file mode 100644
@@ -0,0 +1,140 @@
+#ifndef _LINUX_INCLUDE_MFD_IMX25_TSADC_H_
+#define _LINUX_INCLUDE_MFD_IMX25_TSADC_H_
+
+struct regmap;
+struct clk;
+
+struct mx25_tsadc {
+ struct regmap *regs;
+ struct irq_domain *domain;
+ struct clk *clk;
+};
+
+#define MX25_TSC_TGCR 0x00
+#define MX25_TSC_TGSR 0x04
+#define MX25_TSC_TICR 0x08
+
+/* The same register layout for TC and GC queue */
+#define MX25_ADCQ_FIFO 0x00
+#define MX25_ADCQ_CR 0x04
+#define MX25_ADCQ_SR 0x08
+#define MX25_ADCQ_MR 0x0c
+#define MX25_ADCQ_ITEM_7_0 0x20
+#define MX25_ADCQ_ITEM_15_8 0x24
+#define MX25_ADCQ_CFG(n) (0x40 + ((n) * 0x4))
+
+#define MX25_ADCQ_MR_MASK 0xffffffff
+
+/* TGCR */
+#define MX25_TGCR_PDBTIME(x) ((x) << 25)
+#define MX25_TGCR_PDBTIME_MASK GENMASK(31, 25)
+#define MX25_TGCR_PDBEN BIT(24)
+#define MX25_TGCR_PDEN BIT(23)
+#define MX25_TGCR_ADCCLKCFG(x) ((x) << 16)
+#define MX25_TGCR_GET_ADCCLK(x) (((x) >> 16) & 0x1f)
+#define MX25_TGCR_INTREFEN BIT(10)
+#define MX25_TGCR_POWERMODE_MASK GENMASK(9, 8)
+#define MX25_TGCR_POWERMODE_SAVE (1 << 8)
+#define MX25_TGCR_POWERMODE_ON (2 << 8)
+#define MX25_TGCR_STLC BIT(5)
+#define MX25_TGCR_SLPC BIT(4)
+#define MX25_TGCR_FUNC_RST BIT(2)
+#define MX25_TGCR_TSC_RST BIT(1)
+#define MX25_TGCR_CLK_EN BIT(0)
+
+/* TGSR */
+#define MX25_TGSR_SLP_INT BIT(2)
+#define MX25_TGSR_GCQ_INT BIT(1)
+#define MX25_TGSR_TCQ_INT BIT(0)
+
+/* ADCQ_ITEM_* */
+#define _MX25_ADCQ_ITEM(item, x) ((x) << ((item) * 4))
+#define MX25_ADCQ_ITEM(item, x) ((item) >= 8 ? \
+ _MX25_ADCQ_ITEM((item) - 8, (x)) : _MX25_ADCQ_ITEM((item), (x)))
+
+/* ADCQ_FIFO (TCQFIFO and GCQFIFO) */
+#define MX25_ADCQ_FIFO_DATA(x) (((x) >> 4) & 0xfff)
+#define MX25_ADCQ_FIFO_ID(x) ((x) & 0xf)
+
+/* ADCQ_CR (TCQR and GCQR) */
+#define MX25_ADCQ_CR_PDCFG_LEVEL BIT(19)
+#define MX25_ADCQ_CR_PDMSK BIT(18)
+#define MX25_ADCQ_CR_FRST BIT(17)
+#define MX25_ADCQ_CR_QRST BIT(16)
+#define MX25_ADCQ_CR_RWAIT_MASK GENMASK(15, 12)
+#define MX25_ADCQ_CR_RWAIT(x) ((x) << 12)
+#define MX25_ADCQ_CR_WMRK_MASK GENMASK(11, 8)
+#define MX25_ADCQ_CR_WMRK(x) ((x) << 8)
+#define MX25_ADCQ_CR_LITEMID_MASK (0xf << 4)
+#define MX25_ADCQ_CR_LITEMID(x) ((x) << 4)
+#define MX25_ADCQ_CR_RPT BIT(3)
+#define MX25_ADCQ_CR_FQS BIT(2)
+#define MX25_ADCQ_CR_QSM_MASK GENMASK(1, 0)
+#define MX25_ADCQ_CR_QSM_PD 0x1
+#define MX25_ADCQ_CR_QSM_FQS 0x2
+#define MX25_ADCQ_CR_QSM_FQS_PD 0x3
+
+/* ADCQ_SR (TCQSR and GCQSR) */
+#define MX25_ADCQ_SR_FDRY BIT(15)
+#define MX25_ADCQ_SR_FULL BIT(14)
+#define MX25_ADCQ_SR_EMPT BIT(13)
+#define MX25_ADCQ_SR_FDN(x) (((x) >> 8) & 0x1f)
+#define MX25_ADCQ_SR_FRR BIT(6)
+#define MX25_ADCQ_SR_FUR BIT(5)
+#define MX25_ADCQ_SR_FOR BIT(4)
+#define MX25_ADCQ_SR_EOQ BIT(1)
+#define MX25_ADCQ_SR_PD BIT(0)
+
+/* ADCQ_MR (TCQMR and GCQMR) */
+#define MX25_ADCQ_MR_FDRY_DMA BIT(31)
+#define MX25_ADCQ_MR_FER_DMA BIT(22)
+#define MX25_ADCQ_MR_FUR_DMA BIT(21)
+#define MX25_ADCQ_MR_FOR_DMA BIT(20)
+#define MX25_ADCQ_MR_EOQ_DMA BIT(17)
+#define MX25_ADCQ_MR_PD_DMA BIT(16)
+#define MX25_ADCQ_MR_FDRY_IRQ BIT(15)
+#define MX25_ADCQ_MR_FER_IRQ BIT(6)
+#define MX25_ADCQ_MR_FUR_IRQ BIT(5)
+#define MX25_ADCQ_MR_FOR_IRQ BIT(4)
+#define MX25_ADCQ_MR_EOQ_IRQ BIT(1)
+#define MX25_ADCQ_MR_PD_IRQ BIT(0)
+
+/* ADCQ_CFG (TICR, TCC0-7,GCC0-7) */
+#define MX25_ADCQ_CFG_SETTLING_TIME(x) ((x) << 24)
+#define MX25_ADCQ_CFG_IGS (1 << 20)
+#define MX25_ADCQ_CFG_NOS_MASK GENMASK(19, 16)
+#define MX25_ADCQ_CFG_NOS(x) (((x) - 1) << 16)
+#define MX25_ADCQ_CFG_WIPER (1 << 15)
+#define MX25_ADCQ_CFG_YNLR (1 << 14)
+#define MX25_ADCQ_CFG_YPLL_HIGH (0 << 12)
+#define MX25_ADCQ_CFG_YPLL_OFF (1 << 12)
+#define MX25_ADCQ_CFG_YPLL_LOW (3 << 12)
+#define MX25_ADCQ_CFG_XNUR_HIGH (0 << 10)
+#define MX25_ADCQ_CFG_XNUR_OFF (1 << 10)
+#define MX25_ADCQ_CFG_XNUR_LOW (3 << 10)
+#define MX25_ADCQ_CFG_XPUL_HIGH (0 << 9)
+#define MX25_ADCQ_CFG_XPUL_OFF (1 << 9)
+#define MX25_ADCQ_CFG_REFP(sel) ((sel) << 7)
+#define MX25_ADCQ_CFG_REFP_YP MX25_ADCQ_CFG_REFP(0)
+#define MX25_ADCQ_CFG_REFP_XP MX25_ADCQ_CFG_REFP(1)
+#define MX25_ADCQ_CFG_REFP_EXT MX25_ADCQ_CFG_REFP(2)
+#define MX25_ADCQ_CFG_REFP_INT MX25_ADCQ_CFG_REFP(3)
+#define MX25_ADCQ_CFG_REFP_MASK GENMASK(8, 7)
+#define MX25_ADCQ_CFG_IN(sel) ((sel) << 4)
+#define MX25_ADCQ_CFG_IN_XP MX25_ADCQ_CFG_IN(0)
+#define MX25_ADCQ_CFG_IN_YP MX25_ADCQ_CFG_IN(1)
+#define MX25_ADCQ_CFG_IN_XN MX25_ADCQ_CFG_IN(2)
+#define MX25_ADCQ_CFG_IN_YN MX25_ADCQ_CFG_IN(3)
+#define MX25_ADCQ_CFG_IN_WIPER MX25_ADCQ_CFG_IN(4)
+#define MX25_ADCQ_CFG_IN_AUX0 MX25_ADCQ_CFG_IN(5)
+#define MX25_ADCQ_CFG_IN_AUX1 MX25_ADCQ_CFG_IN(6)
+#define MX25_ADCQ_CFG_IN_AUX2 MX25_ADCQ_CFG_IN(7)
+#define MX25_ADCQ_CFG_REFN(sel) ((sel) << 2)
+#define MX25_ADCQ_CFG_REFN_XN MX25_ADCQ_CFG_REFN(0)
+#define MX25_ADCQ_CFG_REFN_YN MX25_ADCQ_CFG_REFN(1)
+#define MX25_ADCQ_CFG_REFN_NGND MX25_ADCQ_CFG_REFN(2)
+#define MX25_ADCQ_CFG_REFN_NGND2 MX25_ADCQ_CFG_REFN(3)
+#define MX25_ADCQ_CFG_REFN_MASK GENMASK(3, 2)
+#define MX25_ADCQ_CFG_PENIACK (1 << 1)
+
+#endif /* _LINUX_INCLUDE_MFD_IMX25_TSADC_H_ */