@@ -301,20 +301,30 @@ config TOUCHSCREEN_FT6236
depends on GPIOLIB || COMPILE_TEST
help
Say Y here to enable support for the I2C connected FT6x06 and
FT6x36 family of capacitive touchscreen drivers.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called ft6236.
+config TOUCHSCREEN_EGALAX_SERIO
+ tristate "EETI eGalax serial touchscreen"
+ select SERIO
+ help
+ Say Y here to enable support for serial connected EETI
+ eGalax touch panels.
+
+ To compile this driver as a module, choose M here: the
+ module will be called egalax.
+
config TOUCHSCREEN_FUJITSU
tristate "Fujitsu serial touchscreen"
select SERIO
help
Say Y here if you have the Fujitsu touchscreen (such as one
installed in Lifebook P series laptop) connected to your
system.
If unsure, say N.
@@ -28,20 +28,21 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI) += cyttsp4_spi.o
obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o
obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o
obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o
obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06) += edt-ft5x06.o
obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o
obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
obj-$(CONFIG_TOUCHSCREEN_ELAN) += elants_i2c.o
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o
+obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIO) += egalax.o
obj-$(CONFIG_TOUCHSCREEN_FT6236) += ft6236.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o
obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o
obj-$(CONFIG_TOUCHSCREEN_MAX11801) += max11801_ts.o
new file mode 100644
@@ -0,0 +1,210 @@
+/*
+ * EETI Egalax serial touchscreen driver
+ *
+ * Copyright (c) 2015 Zoltán Böszörményi <zboszor@pr.hu>
+ *
+ * based on the
+ *
+ * Hampshire serial touchscreen driver (Copyright (c) 2010 Adam Bennett)
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC "EETI Egalax serial touchscreen driver"
+
+MODULE_AUTHOR("Zoltán Böszörményi <zboszor@pr.hu>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define EGALAX_FORMAT_MAX_LENGTH 6
+#define EGALAX_RESPONSE_BEGIN_BYTE 0x80
+#define EGALAX_FORMAT_PRESSURE_BIT 0x40
+#define EGALAX_FORMAT_TOUCH_BIT 0x01
+#define EGALAX_FORMAT_RESOLUTION 0x06
+
+#define EGALAX_MIN_XC 0
+#define EGALAX_MAX_XC 0x4000
+#define EGALAX_MIN_YC 0
+#define EGALAX_MAX_YC 0x4000
+
+#define EGALAX_GET_XC(data, resbits, shift) ((((data[1] & (resbits)) << 7) | (data[2] & 0x7f)) << shift)
+#define EGALAX_GET_YC(data, resbits, shift) ((((data[3] & (resbits)) << 7) | (data[4] & 0x7f)) << shift)
+#define EGALAX_GET_TOUCHED(data) (EGALAX_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct egalax {
+ struct input_dev *dev;
+ struct serio *serio;
+ int idx;
+ int bytes;
+ int resbits;
+ int shift;
+ unsigned char data[EGALAX_FORMAT_MAX_LENGTH];
+ char phys[32];
+};
+
+static void egalax_process_data(struct egalax *pegalax)
+{
+ struct input_dev *dev = pegalax->dev;
+
+ if (++pegalax->idx == pegalax->bytes) {
+ input_report_abs(dev, ABS_X, EGALAX_GET_XC(pegalax->data, pegalax->resbits, pegalax->shift));
+ input_report_abs(dev, ABS_Y, EGALAX_GET_YC(pegalax->data, pegalax->resbits, pegalax->shift));
+ input_report_key(dev, BTN_TOUCH, EGALAX_GET_TOUCHED(pegalax->data));
+ input_sync(dev);
+
+ pegalax->idx = 0;
+ }
+}
+
+static irqreturn_t egalax_interrupt(struct serio *serio,
+ unsigned char data, unsigned int flags)
+{
+ struct egalax *pegalax = serio_get_drvdata(serio);
+
+ pegalax->data[pegalax->idx] = data;
+
+ if (EGALAX_RESPONSE_BEGIN_BYTE & pegalax->data[0]) {
+ pegalax->bytes = (EGALAX_FORMAT_PRESSURE_BIT & pegalax->data[0] ? 6 : 5);
+ switch ((EGALAX_FORMAT_RESOLUTION & pegalax->data[0]) >> 1) {
+ case 0:
+ pegalax->resbits = 0x0f;
+ pegalax->shift = 3;
+ break;
+ case 1:
+ pegalax->resbits = 0x1f;
+ pegalax->shift = 2;
+ break;
+ case 2:
+ pegalax->resbits = 0x3f;
+ pegalax->shift = 1;
+ break;
+ default:
+ pegalax->resbits = 0x7f;
+ pegalax->shift = 0;
+ break;
+ }
+ egalax_process_data(pegalax);
+ }
+ else
+ dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+ pegalax->data[0]);
+
+ return IRQ_HANDLED;
+}
+
+static void egalax_disconnect(struct serio *serio)
+{
+ struct egalax *pegalax = serio_get_drvdata(serio);
+
+ input_get_device(pegalax->dev);
+ input_unregister_device(pegalax->dev);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ input_put_device(pegalax->dev);
+ kfree(pegalax);
+}
+
+/*
+ * egalax_connect() is the routine that is called when someone adds a
+ * new serio device that supports egalax protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int egalax_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct egalax *pegalax;
+ struct input_dev *input_dev;
+ int err;
+
+ pegalax = kzalloc(sizeof(struct egalax), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!pegalax || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
+
+ pegalax->serio = serio;
+ pegalax->dev = input_dev;
+ snprintf(pegalax->phys, sizeof(pegalax->phys),
+ "%s/input0", serio->phys);
+
+ input_dev->name = "EETI eGalaxTouch Serial TouchScreen";
+ input_dev->phys = pegalax->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_EGALAX;
+ input_dev->id.product = 0;
+ input_dev->id.version = 0x0001;
+ input_dev->dev.parent = &serio->dev;
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(pegalax->dev, ABS_X,
+ EGALAX_MIN_XC, EGALAX_MAX_XC, 0, 0);
+ input_set_abs_params(pegalax->dev, ABS_Y,
+ EGALAX_MIN_YC, EGALAX_MAX_YC, 0, 0);
+
+ serio_set_drvdata(serio, pegalax);
+
+ err = serio_open(serio, drv);
+ if (err)
+ goto fail2;
+
+ err = input_register_device(pegalax->dev);
+ if (err)
+ goto fail3;
+
+ return 0;
+
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
+ kfree(pegalax);
+ return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id egalax_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_EGALAX,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, egalax_serio_ids);
+
+static struct serio_driver egalax_drv = {
+ .driver = {
+ .name = "egalax",
+ },
+ .description = DRIVER_DESC,
+ .id_table = egalax_serio_ids,
+ .interrupt = egalax_interrupt,
+ .connect = egalax_connect,
+ .disconnect = egalax_disconnect,
+};
+
+module_serio_driver(egalax_drv);
@@ -70,12 +70,13 @@
#define SERIO_FUJITSU 0x35
#define SERIO_ZHENHUA 0x36
#define SERIO_INEXIO 0x37
#define SERIO_TOUCHIT213 0x38
#define SERIO_W8001 0x39
#define SERIO_DYNAPRO 0x3a
#define SERIO_HAMPSHIRE 0x3b
#define SERIO_PS2MULT 0x3c
#define SERIO_TSC40 0x3d
#define SERIO_WACOM_IV 0x3e
+#define SERIO_EGALAX 0x3f
#endif /* _UAPI_SERIO_H */