@@ -1,7 +1,7 @@
Rotary encoder DT bindings
Required properties:
-- gpios: a spec for two GPIOs to be used
+- gpios: a spec for at least two GPIOs to be used, most significant first
Optional properties:
- linux,axis: the input subsystem axis to map to this rotary encoder.
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/smsc911x.h>
#include <linux/input.h>
#include <linux/rotary_encoder.h>
@@ -370,10 +371,25 @@ static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
.steps = 24,
.axis = REL_X,
.relative_axis = 1,
- .gpio_a = GPIO_VOLENC_A,
- .gpio_b = GPIO_VOLENC_B,
- .inverted_a = 1,
- .inverted_b = 0,
+};
+
+static struct gpiod_lookup_table raumfeld_rotary_encoder_gpio_lookup = {
+ .dev_id = "rotary_encoder.0",
+ .table = {
+ {
+ .chip_label = "gpio-0",
+ .chip_hwnum = GPIO_VOLENC_A,
+ .idx = 0,
+ .flags = GPIO_ACTIVE_LOW,
+ },
+ {
+ .chip_label = "gpio-0",
+ .chip_hwnum = GPIO_VOLENC_B,
+ .idx = 1,
+ .flags = GPIO_ACTIVE_HIGH,
+ },
+ { /* sentinel */ }
+ },
};
static struct platform_device rotary_encoder_device = {
@@ -1051,6 +1067,7 @@ static void __init __maybe_unused raumfeld_controller_init(void)
int ret;
pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
+ gpiod_add_lookup_table(&raumfeld_rotary_encoder_gpio_lookup);
platform_device_register(&rotary_encoder_device);
spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
@@ -25,7 +25,6 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
#include <linux/pm.h>
#define DRV_NAME "rotary-encoder"
@@ -36,45 +35,47 @@ struct rotary_encoder {
/* configuration */
unsigned int steps;
unsigned int axis;
- unsigned int gpio_a;
- unsigned int gpio_b;
- unsigned int inverted_a;
- unsigned int inverted_b;
unsigned int steps_per_period;
bool relative_axis;
bool rollover;
bool wakeup_source;
- unsigned int irq_a;
- unsigned int irq_b;
+ struct gpio_descs *gpios;
+ unsigned int *irq;
/* state */
unsigned int pos;
bool armed;
- unsigned char dir; /* 0 - clockwise, 1 - CCW */
+ signed char dir; /* 1 - clockwise, -1 - CCW */
char last_stable;
};
-static int rotary_encoder_get_state(const struct rotary_encoder *encoder)
+static unsigned rotary_encoder_get_state(const struct rotary_encoder *encoder)
{
- int a = !!gpio_get_value(encoder->gpio_a);
- int b = !!gpio_get_value(encoder->gpio_b);
+ int i;
+ unsigned ret = 0;
- a ^= encoder->inverted_a;
- b ^= encoder->inverted_b;
+ for (i = 0; i < encoder->gpios->ndescs; ++i) {
+ int val = gpiod_get_value(encoder->gpios->desc[i]);
+ /* convert from gray encoding to normal */
+ if (ret & 1)
+ val = !val;
- return ((a << 1) | b);
+ ret = ret << 1 | val;
+ }
+
+ return ret & 3;
}
static void rotary_encoder_report_event(struct rotary_encoder *encoder)
{
if (encoder->relative_axis) {
input_report_rel(encoder->input,
- encoder->axis, encoder->dir ? -1 : 1);
+ encoder->axis, encoder->dir);
} else {
unsigned int pos = encoder->pos;
- if (encoder->dir) {
+ if (encoder->dir < 0) {
/* turning counter-clockwise */
if (encoder->rollover)
pos += encoder->steps;
@@ -112,12 +113,12 @@ static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
break;
case 0x1:
- case 0x2:
+ case 0x3:
if (encoder->armed)
- encoder->dir = state - 1;
+ encoder->dir = 2 - state;
break;
- case 0x3:
+ case 0x2:
encoder->armed = true;
break;
}
@@ -132,19 +133,13 @@ static irqreturn_t rotary_encoder_half_period_irq(int irq, void *dev_id)
state = rotary_encoder_get_state(encoder);
- switch (state) {
- case 0x00:
- case 0x03:
+ if (state & 1) {
+ encoder->dir = ((encoder->last_stable - state + 1) % 4) - 1;
+ } else {
if (state != encoder->last_stable) {
rotary_encoder_report_event(encoder);
encoder->last_stable = state;
}
- break;
-
- case 0x01:
- case 0x02:
- encoder->dir = (encoder->last_stable + state) & 0x01;
- break;
}
return IRQ_HANDLED;
@@ -153,44 +148,16 @@ static irqreturn_t rotary_encoder_half_period_irq(int irq, void *dev_id)
static irqreturn_t rotary_encoder_quarter_period_irq(int irq, void *dev_id)
{
struct rotary_encoder *encoder = dev_id;
- unsigned char sum;
int state;
state = rotary_encoder_get_state(encoder);
- /*
- * We encode the previous and the current state using a byte.
- * The previous state in the MSB nibble, the current state in the LSB
- * nibble. Then use a table to decide the direction of the turn.
- */
- sum = (encoder->last_stable << 4) + state;
- switch (sum) {
- case 0x31:
- case 0x10:
- case 0x02:
- case 0x23:
- encoder->dir = 0; /* clockwise */
- break;
-
- case 0x13:
- case 0x01:
- case 0x20:
- case 0x32:
- encoder->dir = 1; /* counter-clockwise */
- break;
-
- default:
- /*
- * Ignore all other values. This covers the case when the
- * state didn't change (a spurious interrupt) and the
- * cases where the state changed by two steps, making it
- * impossible to tell the direction.
- *
- * In either case, don't report any event and save the
- * state for later.
- */
+ if ((encoder->last_stable + 1) % 4 == state)
+ encoder->dir = 1;
+ else if (encoder->last_stable == (state + 1) % 4)
+ encoder->dir = -1;
+ else
goto out;
- }
rotary_encoder_report_event(encoder);
@@ -212,7 +179,6 @@ static int rotary_encoder_parse_dt(struct device *dev,
const struct of_device_id *of_id =
of_match_device(rotary_encoder_of_match, dev);
struct device_node *np = dev->of_node;
- enum of_gpio_flags flags;
int error;
if (!of_id || !np)
@@ -221,12 +187,6 @@ static int rotary_encoder_parse_dt(struct device *dev,
of_property_read_u32(np, "rotary-encoder,steps", &encoder->steps);
of_property_read_u32(np, "linux,axis", &encoder->axis);
- encoder->gpio_a = of_get_gpio_flags(np, 0, &flags);
- encoder->inverted_a = flags & OF_GPIO_ACTIVE_LOW;
-
- encoder->gpio_b = of_get_gpio_flags(np, 1, &flags);
- encoder->inverted_b = flags & OF_GPIO_ACTIVE_LOW;
-
encoder->relative_axis =
of_property_read_bool(np, "rotary-encoder,relative-axis");
encoder->rollover =
@@ -273,11 +233,6 @@ static int rotary_encoder_parse_pdata(struct device *dev,
encoder->steps = pdata->steps;
encoder->axis = pdata->axis;
- encoder->gpio_a = pdata->gpio_a;
- encoder->gpio_b = pdata->gpio_b;
- encoder->inverted_a = pdata->inverted_a;
- encoder->inverted_b = pdata->inverted_b;
- encoder->steps_per_period = pdata->steps_per_period;
encoder->relative_axis = pdata->relative_axis;
encoder->rollover = pdata->rollover;
@@ -291,6 +246,7 @@ static int rotary_encoder_probe(struct platform_device *pdev)
struct input_dev *input;
irq_handler_t handler;
int err;
+ unsigned int i;
encoder = devm_kzalloc(dev, sizeof(struct rotary_encoder), GFP_KERNEL);
input = devm_input_allocate_device(&pdev->dev);
@@ -307,6 +263,16 @@ static int rotary_encoder_probe(struct platform_device *pdev)
if (err < 0)
return err;
+ encoder->gpios = devm_gpiod_get_array(dev, NULL, GPIOD_IN);
+ if (IS_ERR(encoder->gpios)) {
+ dev_err(dev, "unable to get gpios\n");
+ return PTR_ERR(encoder->gpios);
+ }
+ if (encoder->gpios->ndescs < 2) {
+ dev_err(dev, "not enough gpios found\n");
+ return -EINVAL;
+ }
+
encoder->input = input;
input->name = pdev->name;
@@ -322,25 +288,7 @@ static int rotary_encoder_probe(struct platform_device *pdev)
encoder->axis, 0, encoder->steps, 0, 1);
}
- /* request the GPIOs */
- err = devm_gpio_request_one(dev, encoder->gpio_a,
- GPIOF_IN, dev_name(dev));
- if (err) {
- dev_err(dev, "unable to request GPIO %d\n", encoder->gpio_a);
- return err;
- }
-
- err = devm_gpio_request_one(dev, encoder->gpio_b,
- GPIOF_IN, dev_name(dev));
- if (err) {
- dev_err(dev, "unable to request GPIO %d\n", encoder->gpio_b);
- return err;
- }
-
- encoder->irq_a = gpio_to_irq(encoder->gpio_a);
- encoder->irq_b = gpio_to_irq(encoder->gpio_b);
-
- switch (encoder->steps_per_period) {
+ switch (encoder->steps_per_period >> (encoder->gpios->ndescs - 2)) {
case 4:
handler = &rotary_encoder_quarter_period_irq;
encoder->last_stable = rotary_encoder_get_state(encoder);
@@ -358,20 +306,23 @@ static int rotary_encoder_probe(struct platform_device *pdev)
return -EINVAL;
}
- err = devm_request_irq(dev, encoder->irq_a, handler,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- DRV_NAME, encoder);
- if (err) {
- dev_err(dev, "unable to request IRQ %d\n", encoder->irq_a);
- return err;
- }
+ encoder->irq =
+ devm_kzalloc(dev,
+ sizeof(*encoder->irq) * encoder->gpios->ndescs,
+ GFP_KERNEL);
+ if (!encoder->irq)
+ return -ENOMEM;
- err = devm_request_irq(dev, encoder->irq_b, handler,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- DRV_NAME, encoder);
- if (err) {
- dev_err(dev, "unable to request IRQ %d\n", encoder->irq_b);
- return err;
+ for (i = 0; i < encoder->gpios->ndescs; ++i) {
+ encoder->irq[i] = gpiod_to_irq(encoder->gpios->desc[i]);
+ err = devm_request_irq(dev, encoder->irq[i], handler,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ DRV_NAME, encoder);
+ if (err) {
+ dev_err(dev, "unable to request IRQ %d (gpio#%d)\n",
+ encoder->irq[i], i);
+ return err;
+ }
}
err = input_register_device(input);
@@ -399,8 +350,9 @@ static int rotary_encoder_suspend(struct device *dev)
struct rotary_encoder *encoder = dev_get_drvdata(dev);
if (device_may_wakeup(dev)) {
- enable_irq_wake(encoder->irq_a);
- enable_irq_wake(encoder->irq_b);
+ unsigned int i;
+ for (i = 0; i < encoder->gpios->ndescs; ++i)
+ enable_irq_wake(encoder->irq[i]);
}
return 0;
@@ -411,8 +363,9 @@ static int rotary_encoder_resume(struct device *dev)
struct rotary_encoder *encoder = dev_get_drvdata(dev);
if (device_may_wakeup(dev)) {
- disable_irq_wake(encoder->irq_a);
- disable_irq_wake(encoder->irq_b);
+ unsigned int i;
+ for (i = 0; i < encoder->gpios->ndescs; ++i)
+ disable_irq_wake(encoder->irq[i]);
}
return 0;
@@ -4,10 +4,6 @@
struct rotary_encoder_platform_data {
unsigned int steps;
unsigned int axis;
- unsigned int gpio_a;
- unsigned int gpio_b;
- unsigned int inverted_a;
- unsigned int inverted_b;
unsigned int steps_per_period;
bool relative_axis;
bool rollover;