@@ -43,8 +43,22 @@ struct pwm_bl_data {
void (*exit)(struct device *);
};
+static int compute_duty_cycle(struct pwm_bl_data *pb, int brightness)
+{
+ unsigned int lth = pb->lth_brightness;
+ int duty_cycle;
+
+ if (pb->levels)
+ duty_cycle = pb->levels[brightness];
+ else
+ duty_cycle = brightness;
+
+ return (duty_cycle * (pb->period - lth) / pb->scale) + lth;
+}
+
static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)
{
+ struct pwm_state pstate;
int err;
if (pb->enabled)
@@ -57,17 +71,24 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)
if (pb->enable_gpio)
gpiod_set_value(pb->enable_gpio, 1);
- pwm_enable(pb->pwm);
+ pwm_get_state(pb->pwm, &pstate);
+ pstate.duty_cycle = compute_duty_cycle(pb, brightness);
+ pstate.enabled = true;
+ pwm_apply_state(pb->pwm, &pstate);
pb->enabled = true;
}
static void pwm_backlight_power_off(struct pwm_bl_data *pb)
{
+ struct pwm_state pstate;
+
if (!pb->enabled)
return;
- pwm_config(pb->pwm, 0, pb->period);
- pwm_disable(pb->pwm);
+ pwm_get_state(pb->pwm, &pstate);
+ pstate.duty_cycle = 0;
+ pstate.enabled = false;
+ pwm_apply_state(pb->pwm, &pstate);
if (pb->enable_gpio)
gpiod_set_value(pb->enable_gpio, 0);
@@ -76,24 +97,10 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
pb->enabled = false;
}
-static int compute_duty_cycle(struct pwm_bl_data *pb, int brightness)
-{
- unsigned int lth = pb->lth_brightness;
- int duty_cycle;
-
- if (pb->levels)
- duty_cycle = pb->levels[brightness];
- else
- duty_cycle = brightness;
-
- return (duty_cycle * (pb->period - lth) / pb->scale) + lth;
-}
-
static int pwm_backlight_update_status(struct backlight_device *bl)
{
struct pwm_bl_data *pb = bl_get_data(bl);
int brightness = bl->props.brightness;
- int duty_cycle;
if (bl->props.power != FB_BLANK_UNBLANK ||
bl->props.fb_blank != FB_BLANK_UNBLANK ||
@@ -104,8 +111,6 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
brightness = pb->notify(pb->dev, brightness);
if (brightness > 0) {
- duty_cycle = compute_duty_cycle(pb, brightness);
- pwm_config(pb->pwm, duty_cycle, pb->period);
pwm_backlight_power_on(pb, brightness);
} else
pwm_backlight_power_off(pb);
pwm_config/enable/disable() have been deprecated and should be replaced by pwm_apply_state(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- drivers/video/backlight/pwm_bl.c | 43 ++++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 19 deletions(-)