diff mbox

[v5,07/46] clk: pwm: use pwm_get_args() where appropriate

Message ID 1459368249-13241-8-git-send-email-boris.brezillon@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Boris BREZILLON March 30, 2016, 8:03 p.m. UTC 
The PWM framework has clarified the concept of reference PWM config
(the platform dependent config retrieved from the DT or the PWM
lookup table) and real PWM state.

Use pwm_get_args() when the PWM user wants to retrieve this reference
config and not the current state.

This is part of the rework allowing the PWM framework to support
hardware readout and expose real PWM state even when the PWM has
just been requested (before the user calls pwm_config/enable/disable()).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
 drivers/clk/clk-pwm.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

Comments

Stephen Boyd March 30, 2016, 9:58 p.m. UTC | #1 
On 03/30, Boris Brezillon wrote:
> The PWM framework has clarified the concept of reference PWM config
> (the platform dependent config retrieved from the DT or the PWM
> lookup table) and real PWM state.
> 
> Use pwm_get_args() when the PWM user wants to retrieve this reference
> config and not the current state.
> 
> This is part of the rework allowing the PWM framework to support
> hardware readout and expose real PWM state even when the PWM has
> just been requested (before the user calls pwm_config/enable/disable()).
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---

Acked-by: Stephen Boyd <sboyd@codeaurora.org>
diff mbox

Patch

diff --git a/drivers/clk/clk-pwm.c b/drivers/clk/clk-pwm.c
index 8830458..ebcd738 100644
--- a/drivers/clk/clk-pwm.c
+++ b/drivers/clk/clk-pwm.c
@@ -56,6 +56,7 @@  static const struct clk_ops clk_pwm_ops = {
 static int clk_pwm_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
+	struct pwm_args pargs = { };
 	struct clk_init_data init;
 	struct clk_pwm *clk_pwm;
 	struct pwm_device *pwm;
@@ -71,22 +72,23 @@  static int clk_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(pwm))
 		return PTR_ERR(pwm);
 
-	if (!pwm->period) {
+	pwm_get_args(pwm, &pargs);
+	if (!pargs.period) {
 		dev_err(&pdev->dev, "invalid PWM period\n");
 		return -EINVAL;
 	}
 
 	if (of_property_read_u32(node, "clock-frequency", &clk_pwm->fixed_rate))
-		clk_pwm->fixed_rate = NSEC_PER_SEC / pwm->period;
+		clk_pwm->fixed_rate = NSEC_PER_SEC / pargs.period;
 
-	if (pwm->period != NSEC_PER_SEC / clk_pwm->fixed_rate &&
-	    pwm->period != DIV_ROUND_UP(NSEC_PER_SEC, clk_pwm->fixed_rate)) {
+	if (pargs.period != NSEC_PER_SEC / clk_pwm->fixed_rate &&
+	    pargs.period != DIV_ROUND_UP(NSEC_PER_SEC, clk_pwm->fixed_rate)) {
 		dev_err(&pdev->dev,
 			"clock-frequency does not match PWM period\n");
 		return -EINVAL;
 	}
 
-	ret = pwm_config(pwm, (pwm->period + 1) >> 1, pwm->period);
+	ret = pwm_config(pwm, (pargs.period + 1) >> 1, pargs.period);
 	if (ret < 0)
 		return ret;