@@ -13,6 +13,7 @@ Optional properties:
- vdd-supply: Regulator controlling the controller supply
- scan-idle-hz: idle scanning frequency in Hz (0 - 65535 Hz; default 10 Hz)
- scan-active-hz: touch scanning frequeny in Hz (0 - 65535 Hz; default 50 Hz)
+- touch-size-min-mm: minimum touch size limit in mm (0 - 255 mm; 0 = no limit (default))
Example:
@@ -32,6 +33,7 @@ Example:
y-size = <600>;
scan-idle-hz = <50>;
scan-active-hz = <250>;
+ touch-size-min-mm = <5>;
};
/* ... */
@@ -54,6 +54,7 @@
#define COMMAND_SETCONFIG 0x03
#define COMMAND_DATAREQUEST 0x04
#define COMMAND_SCANFREQ 0x08
+#define COMMAND_TOUCH_SIZE 0x09
#define COMMAND_STATUS 0X1e
/*
@@ -65,6 +66,7 @@
#define RESPONSE_RESOLUTION 0x02
#define RESPONSE_SETCONFIG 0x03
#define RESPONSE_SCANFREQ 0x08
+#define RESPONSE_TOUCH_SIZE 0x09
#define RESPONSE_STATUS 0X1e
/*
@@ -276,6 +278,21 @@ static int zforce_scan_frequency(struct zforce_ts *ts, u16 idle, u16 finger,
return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
}
+static int zforce_touch_size_limit(struct zforce_ts *ts, u8 limit)
+{
+ struct i2c_client *client = ts->client;
+ u8 buf[] = { FRAME_START, 5, COMMAND_TOUCH_SIZE,
+ 0, 0, /* maximum size limit off */
+ 1, limit }; /* set minimum size limit */
+
+ if (!limit)
+ return 0;
+
+ dev_dbg(&client->dev, "set min. touch size limit to %d mm\n", limit);
+
+ return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
+}
+
static int zforce_setconfig(struct zforce_ts *ts, char b1)
{
struct i2c_client *client = ts->client;
@@ -316,6 +333,13 @@ static int zforce_start(struct zforce_ts *ts)
goto error;
}
+ ret = zforce_touch_size_limit(ts, pdata->touch_size_min);
+ if (ret) {
+ dev_err(&client->dev, "Unable to set min. touch size, %d\n",
+ ret);
+ goto error;
+ }
+
ret = zforce_setconfig(ts, SETCONFIG_DUALTOUCH);
if (ret) {
dev_err(&client->dev, "Unable to set config\n");
@@ -577,6 +601,7 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id)
case RESPONSE_SETCONFIG:
case RESPONSE_RESOLUTION:
case RESPONSE_SCANFREQ:
+ case RESPONSE_TOUCH_SIZE:
zforce_complete(ts, payload[RESPONSE_ID],
payload[RESPONSE_DATA]);
break;
@@ -851,6 +876,10 @@ static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev)
&pdata->scan_freq_finger))
pdata->scan_freq_finger = SCAN_FREQ_DEFAULT_FINGER;
+ if (of_property_read_u8(np, "touch-size-min-mm",
+ &pdata->touch_size_min))
+ pdata->touch_size_min = 0;
+
return pdata;
}
@@ -20,6 +20,7 @@ struct zforce_ts_platdata {
unsigned int y_max;
u16 scan_freq_idle;
u16 scan_freq_finger;
+ u8 touch_size_min;
};
#endif /* _LINUX_INPUT_ZFORCE_TS_H */