@@ -19,6 +19,7 @@ Required properties:
or: "edt,edt-ft5306"
or: "edt,edt-ft5406"
or: "edt,edt-ft5506"
+ or: "focaltech,ft6236"
- reg: I2C slave address of the chip (0x38)
- interrupt-parent: a phandle pointing to the interrupt controller
@@ -43,6 +44,13 @@ Optional properties:
- offset: allows setting the edge compensation in the range from
0 to 31.
+ - touchscreen-size-x : See touchscreen.txt
+ - touchscreen-size-y : See touchscreen.txt
+ - touchscreen-fuzz-x : See touchscreen.txt
+ - touchscreen-fuzz-y : See touchscreen.txt
+ - touchscreen-inverted-x : See touchscreen.txt
+ - touchscreen-inverted-y : See touchscreen.txt
+ - touchscreen-swapped-x-y : See touchscreen.txt
Example:
polytouch: edt-ft5x06@38 {
deleted file mode 100644
@@ -1,35 +0,0 @@
-* FocalTech FT6236 I2C touchscreen controller
-
-Required properties:
- - compatible : "focaltech,ft6236"
- - reg : I2C slave address of the chip (0x38)
- - interrupt-parent : a phandle pointing to the interrupt controller
- serving the interrupt for this chip
- - interrupts : interrupt specification for the touch controller
- interrupt
- - reset-gpios : GPIO specification for the RSTN input
- - touchscreen-size-x : horizontal resolution of touchscreen (in pixels)
- - touchscreen-size-y : vertical resolution of touchscreen (in pixels)
-
-Optional properties:
- - touchscreen-fuzz-x : horizontal noise value of the absolute input
- device (in pixels)
- - touchscreen-fuzz-y : vertical noise value of the absolute input
- device (in pixels)
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y: X and Y axis are swapped (boolean)
- Swapping is done after inverting the axis
-
-Example:
-
- ft6x06@38 {
- compatible = "focaltech,ft6236";
- reg = <0x38>;
- interrupt-parent = <&gpio>;
- interrupts = <23 2>;
- touchscreen-size-x = <320>;
- touchscreen-size-y = <480>;
- touchscreen-inverted-x;
- touchscreen-swapped-x-y;
- };
The focaltech ft6236 are i2c protocol compatible with other chips supported by the edt,ft5x06 driver. The duplicate ft6236 driver has already been removed from the kernel. This commit removes the duplicate binding to match, adding its compatible string to the edt,ft5x06 binding. This commit also adds the standard touchscreen properties as optional properties to the edt,ft5x06 binding, these were documented in the focaltech,ft6236 binding but missing from the edt,ft5x06 doc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../bindings/input/touchscreen/edt-ft5x06.txt | 8 +++++ .../input/touchscreen/focaltech-ft6236.txt | 35 ---------------------- 2 files changed, 8 insertions(+), 35 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt