| Message ID | 1486660182-22899-1-git-send-email-hongyan.song@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 2017-02-10 at 01:09 +0800, Song Hongyan wrote: > Environmental temperature sensor is a hid defined sensor, > it measures temperature. > > More information can be found in: > http://www.usb.org/developers/hidpage/HUTRR39b.pdf > > According to IIO ABI definition, IIO_TEMP data output unit is > milli degrees Celsius. Add the unit convert from degree to milli > degree. > > Signed-off-by: Song Hongyan <hongyan.song@intel.com> > --- > changes note: capture_sample and proc_event parameter "priv" only > renamed to > "pdev". Since the callback will be called with platform_device * of > the > mfd device. > > .../iio/common/hid-sensors/hid-sensor-attributes.c | 3 + > drivers/iio/temperature/Kconfig | 14 + > drivers/iio/temperature/Makefile | 1 + > drivers/iio/temperature/hid-sensor-temperature.c | 326 > +++++++++++++++++++++ > include/linux/hid-sensor-ids.h | 4 + > 5 files changed, 348 insertions(+) > create mode 100644 drivers/iio/temperature/hid-sensor-temperature.c > > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > index 7ef94a9..68c2bb0 100644 > --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c > @@ -58,6 +58,9 @@ > > {HID_USAGE_SENSOR_PRESSURE, 0, 100, 0}, > {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, > 0, 1000000}, > + > + {HID_USAGE_SENSOR_TEMPERATURE, 0, 1000, 0}, > + {HID_USAGE_SENSOR_TEMPERATURE, > HID_USAGE_SENSOR_UNITS_DEGREES, 1000, 0}, > }; > > static int pow_10(unsigned power) > diff --git a/drivers/iio/temperature/Kconfig > b/drivers/iio/temperature/Kconfig > index 5ea77a7..5f7b9f7 100644 > --- a/drivers/iio/temperature/Kconfig > +++ b/drivers/iio/temperature/Kconfig > @@ -19,6 +19,20 @@ config MAXIM_THERMOCOUPLE > This driver can also be built as a module. If so, the > module will > be called maxim_thermocouple. > > +config HID_SENSOR_TEMP > + tristate "HID Environmental temperature sensor" > + depends on HID_SENSOR_HUB > + select IIO_BUFFER > + select IIO_TRIGGERED_BUFFER > + select HID_SENSOR_IIO_COMMON > + select HID_SENSOR_IIO_TRIGGER > + help > + Say yes here to build support for the HID SENSOR > + temperature driver > + > + To compile this driver as a module, choose M here: the > module > + will be called hid-sensor-temperature. > + > config MLX90614 > tristate "MLX90614 contact-less infrared sensor" > depends on I2C > diff --git a/drivers/iio/temperature/Makefile > b/drivers/iio/temperature/Makefile > index 78c3de0..e157eda 100644 > --- a/drivers/iio/temperature/Makefile > +++ b/drivers/iio/temperature/Makefile > @@ -7,3 +7,4 @@ obj-$(CONFIG_MLX90614) += mlx90614.o > obj-$(CONFIG_TMP006) += tmp006.o > obj-$(CONFIG_TSYS01) += tsys01.o > obj-$(CONFIG_TSYS02D) += tsys02d.o > +obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o > diff --git a/drivers/iio/temperature/hid-sensor-temperature.c > b/drivers/iio/temperature/hid-sensor-temperature.c > new file mode 100644 > index 0000000..9777053 > --- /dev/null > +++ b/drivers/iio/temperature/hid-sensor-temperature.c > @@ -0,0 +1,326 @@ > +/* HID Sensors Driver > + * Copyright (c) 2017, Intel Corporation. > + * > + * This program is free software; you can redistribute it and/or > modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but > WITHOUT > + * ANY WARRANTY; without even the implied warranty of > MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public > License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License > along with > + * this program. > + * > + */ > +#include <linux/device.h> > +#include <linux/hid-sensor-hub.h> > +#include <linux/iio/buffer.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/triggered_buffer.h> > +#include <linux/iio/trigger_consumer.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include "../common/hid-sensors/hid-sensor-trigger.h" > + > +struct temperature_state { > + struct hid_sensor_common common_attributes; > + struct hid_sensor_hub_attribute_info temperature_attr; > + s32 temperature_data; > + int scale_pre_decml; > + int scale_post_decml; > + int scale_precision; > + int value_offset; > +}; > + > +/* Channel definitions */ > +static const struct iio_chan_spec temperature_channels[] = { > + { > + .type = IIO_TEMP, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > + .info_mask_shared_by_type = > BIT(IIO_CHAN_INFO_OFFSET) | > + BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_SAMP_FREQ) | > + BIT(IIO_CHAN_INFO_HYSTERESIS), > + .scan_index = 0, > + } > +}; > + > +/* Adjust channel real bits based on report descriptor */ > +static void temperature_adjust_channel_bit_mask(struct iio_chan_spec > *channels, > + int channel, int size) > +{ > + channels[channel].scan_type.sign = 's'; > + /* Real storage bits will change based on the report desc. > */ > + channels[channel].scan_type.realbits = size * 8; > + /* Maximum size of a sample to capture is s32 */ > + channels[channel].scan_type.storagebits = sizeof(s32) * 8; > +} > + > +/* Channel read_raw handler */ > +static int temperature_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct temperature_state *temperature_state = > iio_priv(indio_dev); > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + if (chan->type == IIO_TEMP) { > + hid_sensor_power_state( > + &temperature_state- > >common_attributes, true); > + *val = sensor_hub_input_attr_get_raw_value( > + temperature_state- > >common_attributes.hsdev, > + HID_USAGE_SENSOR_TEMPERATURE, > + HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_ > TEMPERATURE, > + temperature_state- > >temperature_attr.report_id, > + SENSOR_HUB_SYNC); > + hid_sensor_power_state( > + &temperature_state- > >common_attributes, > + false); > + } > + ret = IIO_VAL_INT; > + break; > + case IIO_CHAN_INFO_SCALE: > + *val = temperature_state->scale_pre_decml; > + *val2 = temperature_state->scale_post_decml; > + ret = temperature_state->scale_precision; > + break; > + case IIO_CHAN_INFO_OFFSET: > + *val = temperature_state->value_offset; > + ret = IIO_VAL_INT; > + break; > + case IIO_CHAN_INFO_SAMP_FREQ: > + ret = hid_sensor_read_samp_freq_value( > + &temperature_state- > >common_attributes, > + val, val2); > + break; > + case IIO_CHAN_INFO_HYSTERESIS: > + ret = hid_sensor_read_raw_hyst_value( > + &temperature_state- > >common_attributes, > + val, val2); > + break; > + default: > + ret = -EINVAL; > + } > + > + return ret; > +} > + > +/* Channel write_raw handler */ > +static int temperature_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + struct temperature_state *temperature_state = > iio_priv(indio_dev); > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + ret = hid_sensor_write_samp_freq_value( > + &temperature_state- > >common_attributes, val, > + val2); > + break; > + case IIO_CHAN_INFO_HYSTERESIS: > + ret = hid_sensor_write_raw_hyst_value( > + &temperature_state- > >common_attributes, val, > + val2); > + break; > + default: > + ret = -EINVAL; > + } > + > + return ret; > +} > + > +static const struct iio_info temperature_info = { > + .driver_module = THIS_MODULE, > + .read_raw = &temperature_read_raw, > + .write_raw = &temperature_write_raw, > +}; > + > +/* Callback handler to send event after all samples are received and > captured */ > +static int temperature_proc_event(struct hid_sensor_hub_device > *hsdev, > + unsigned int usage_id, void *pdev) > +{ > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > + struct temperature_state *temperature_state = > iio_priv(indio_dev); > + > + if (atomic_read(&temperature_state- > >common_attributes.data_ready)) > + iio_push_to_buffers(indio_dev, > + &temperature_state- > >temperature_data); > + return 0; > +} > + > +/* Capture samples in local storage */ > +static int temperature_capture_sample(struct hid_sensor_hub_device > *hsdev, > + unsigned int usage_id, size_t > raw_len, > + char *raw_data, void *pdev) > +{ > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > + struct temperature_state *temperature_state = > iio_priv(indio_dev); > + > + switch (usage_id) { > + case HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE: > + temperature_state->temperature_data = *(s32 > *)raw_data; > + return 0; > + default: > + return -EINVAL; > + } > +} > + > +/* Parse report which is specific to an usage id*/ > +static int temperature_parse_report(struct platform_device *pdev, > + struct hid_sensor_hub_device *hsdev, > + struct iio_chan_spec *channels, > + unsigned int usage_id, > + struct temperature_state *st) > +{ > + int ret; > + > + ret = sensor_hub_input_get_attribute_info(hsdev, > HID_INPUT_REPORT, > + usage_id, > + HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERAT > URE, > + &st->temperature_attr); > + if (ret < 0) > + return ret; > + > + temperature_adjust_channel_bit_mask(channels, 0, > + st->temperature_attr.size); > + > + st->scale_precision = hid_sensor_format_scale( > + HID_USAGE_SENSOR_TEMPERATURE, > + &st->temperature_attr, > + &st->scale_pre_decml, &st- > >scale_post_decml); > + > + /* Set Sensitivity field ids, when there is no individual > modifier */ > + if (st->common_attributes.sensitivity.index < 0) > + sensor_hub_input_get_attribute_info(hsdev, > + HID_FEATURE_REPORT, usage_id, > + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY > _ABS | > + HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERAT > URE, > + &st->common_attributes.sensitivity); > + > + return ret; > +} > + > +static struct hid_sensor_hub_callbacks temperature_callbacks = { > + .send_event = &temperature_proc_event, > + .capture_sample = &temperature_capture_sample, > +}; > + > +/* Function to initialize the processing for usage id */ > +static int hid_temperature_probe(struct platform_device *pdev) > +{ > + static const char *name = "temperature"; > + struct iio_dev *indio_dev; > + struct temperature_state *temperature_state; > + struct hid_sensor_hub_device *hsdev = pdev- > >dev.platform_data; > + int ret; > + > + indio_dev = devm_iio_device_alloc(&pdev->dev, > + sizeof(struct temperature_state)); > + if (!indio_dev) > + return -ENOMEM; > + > + temperature_state = iio_priv(indio_dev); > + temperature_state->common_attributes.hsdev = hsdev; > + temperature_state->common_attributes.pdev = pdev; > + > + ret = hid_sensor_parse_common_attributes(hsdev, > + HID_USAGE_SENSOR_TEMPERATURE > , > + &temperature_state- > >common_attributes); > + if (ret) > + return ret; > + > + indio_dev->channels = devm_kmemdup(&indio_dev->dev, > + temperature_channels, > + sizeof(temperature_channels) > , > + GFP_KERNEL); > + if (!indio_dev->channels) > + return -ENOMEM; > + > + ret = temperature_parse_report(pdev, hsdev, > + (struct iio_chan_spec *)indio_dev- > >channels, > + HID_USAGE_SENSOR_TEMPERATURE, > + temperature_state); > + if (ret) > + return ret; > + > + indio_dev->num_channels = ARRAY_SIZE(temperature_channels); > + indio_dev->dev.parent = &pdev->dev; > + indio_dev->info = &temperature_info; > + indio_dev->name = name; > + indio_dev->modes = INDIO_DIRECT_MODE; > + > + ret = devm_iio_triggered_buffer_setup(&pdev->dev, indio_dev, > + &iio_pollfunc_store_time, > + NULL, NULL); > + if (ret) > + return ret; > + > + atomic_set(&temperature_state->common_attributes.data_ready, > 0); > + ret = hid_sensor_setup_trigger(indio_dev, name, > + &temperature_state- > >common_attributes); > + if (ret) return ret; Below is not required. > + goto error_unreg_buffer; > + > + platform_set_drvdata(pdev, indio_dev); > + > + temperature_callbacks.pdev = pdev; > + ret = sensor_hub_register_callback(hsdev, > HID_USAGE_SENSOR_TEMPERATURE, > + &temperature_callbacks); > + if (ret) > + goto error_unreg_buffer; goto error_remove_trigger; > + > + ret = devm_iio_device_register(indio_dev->dev.parent, > indio_dev); > + if (ret) > + goto error_unreg_buffer_and_callback; goto error_remove_callback; > + > + return ret; > + > +error_unreg_buffer_and_callback: error_remove_callback: > + sensor_hub_remove_callback(hsdev, > HID_USAGE_SENSOR_TEMPERATURE); Below two lines are not required > +error_unreg_buffer: > + iio_triggered_buffer_cleanup(indio_dev); error_remove_trigger: hid_sensor_remove_trigger(..); > + return ret; > +} > + > +/* Function to deinitialize the processing for usage id */ > +static int hid_temperature_remove(struct platform_device *pdev) > +{ > + struct hid_sensor_hub_device *hsdev = pdev- > >dev.platform_data; > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > + struct temperature_state *temperature_state = > iio_priv(indio_dev); > + > + sensor_hub_remove_callback(hsdev, > HID_USAGE_SENSOR_TEMPERATURE); > + hid_sensor_remove_trigger(&temperature_state- > >common_attributes); > + > + return 0; > +} > + > +static const struct platform_device_id hid_temperature_ids[] = { > + { > + /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ > + .name = "HID-SENSOR-200033", > + }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(platform, hid_temperature_ids); > + > +static struct platform_driver hid_temperature_platform_driver = { > + .id_table = hid_temperature_ids, > + .driver = { > + .name = KBUILD_MODNAME, > + .pm = &hid_sensor_pm_ops, > + }, > + .probe = hid_temperature_probe, > + .remove = hid_temperature_remove, > +}; > +module_platform_driver(hid_temperature_platform_driver); > + > +MODULE_DESCRIPTION("HID Environmental temperature sensor"); > +MODULE_AUTHOR("Song Hongyan <hongyan.song@intel.com>"); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid- > sensor-ids.h > index bab8375..ecec978 100644 > --- a/include/linux/hid-sensor-ids.h > +++ b/include/linux/hid-sensor-ids.h > @@ -45,6 +45,10 @@ > #define > HID_USAGE_SENSOR_DATA_ATMOSPHERIC_PRESSURE 0x200430 > #define > HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE 0x200431 > > +/* Tempreture (200033) */ > +#define HID_USAGE_SENSOR_TEMPERATURE > 0x200033 > +#define HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE > 0x200434 > + > /* Gyro 3D: (200076) */ > #define HID_USAGE_SENSOR_GYRO_3D 0x20 > 0076 > #define HID_USAGE_SENSOR_DATA_ANGL_VELOCITY 0 > x200456 Thanks, Srinivas
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c index 7ef94a9..68c2bb0 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c @@ -58,6 +58,9 @@ {HID_USAGE_SENSOR_PRESSURE, 0, 100, 0}, {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000000}, + + {HID_USAGE_SENSOR_TEMPERATURE, 0, 1000, 0}, + {HID_USAGE_SENSOR_TEMPERATURE, HID_USAGE_SENSOR_UNITS_DEGREES, 1000, 0}, }; static int pow_10(unsigned power) diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig index 5ea77a7..5f7b9f7 100644 --- a/drivers/iio/temperature/Kconfig +++ b/drivers/iio/temperature/Kconfig @@ -19,6 +19,20 @@ config MAXIM_THERMOCOUPLE This driver can also be built as a module. If so, the module will be called maxim_thermocouple. +config HID_SENSOR_TEMP + tristate "HID Environmental temperature sensor" + depends on HID_SENSOR_HUB + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + help + Say yes here to build support for the HID SENSOR + temperature driver + + To compile this driver as a module, choose M here: the module + will be called hid-sensor-temperature. + config MLX90614 tristate "MLX90614 contact-less infrared sensor" depends on I2C diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile index 78c3de0..e157eda 100644 --- a/drivers/iio/temperature/Makefile +++ b/drivers/iio/temperature/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_MLX90614) += mlx90614.o obj-$(CONFIG_TMP006) += tmp006.o obj-$(CONFIG_TSYS01) += tsys01.o obj-$(CONFIG_TSYS02D) += tsys02d.o +obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c new file mode 100644 index 0000000..9777053 --- /dev/null +++ b/drivers/iio/temperature/hid-sensor-temperature.c @@ -0,0 +1,326 @@ +/* HID Sensors Driver + * Copyright (c) 2017, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. + * + */ +#include <linux/device.h> +#include <linux/hid-sensor-hub.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include "../common/hid-sensors/hid-sensor-trigger.h" + +struct temperature_state { + struct hid_sensor_common common_attributes; + struct hid_sensor_hub_attribute_info temperature_attr; + s32 temperature_data; + int scale_pre_decml; + int scale_post_decml; + int scale_precision; + int value_offset; +}; + +/* Channel definitions */ +static const struct iio_chan_spec temperature_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS), + .scan_index = 0, + } +}; + +/* Adjust channel real bits based on report descriptor */ +static void temperature_adjust_channel_bit_mask(struct iio_chan_spec *channels, + int channel, int size) +{ + channels[channel].scan_type.sign = 's'; + /* Real storage bits will change based on the report desc. */ + channels[channel].scan_type.realbits = size * 8; + /* Maximum size of a sample to capture is s32 */ + channels[channel].scan_type.storagebits = sizeof(s32) * 8; +} + +/* Channel read_raw handler */ +static int temperature_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct temperature_state *temperature_state = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (chan->type == IIO_TEMP) { + hid_sensor_power_state( + &temperature_state->common_attributes, true); + *val = sensor_hub_input_attr_get_raw_value( + temperature_state->common_attributes.hsdev, + HID_USAGE_SENSOR_TEMPERATURE, + HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE, + temperature_state->temperature_attr.report_id, + SENSOR_HUB_SYNC); + hid_sensor_power_state( + &temperature_state->common_attributes, + false); + } + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = temperature_state->scale_pre_decml; + *val2 = temperature_state->scale_post_decml; + ret = temperature_state->scale_precision; + break; + case IIO_CHAN_INFO_OFFSET: + *val = temperature_state->value_offset; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + ret = hid_sensor_read_samp_freq_value( + &temperature_state->common_attributes, + val, val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret = hid_sensor_read_raw_hyst_value( + &temperature_state->common_attributes, + val, val2); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +/* Channel write_raw handler */ +static int temperature_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct temperature_state *temperature_state = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = hid_sensor_write_samp_freq_value( + &temperature_state->common_attributes, val, + val2); + break; + case IIO_CHAN_INFO_HYSTERESIS: + ret = hid_sensor_write_raw_hyst_value( + &temperature_state->common_attributes, val, + val2); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static const struct iio_info temperature_info = { + .driver_module = THIS_MODULE, + .read_raw = &temperature_read_raw, + .write_raw = &temperature_write_raw, +}; + +/* Callback handler to send event after all samples are received and captured */ +static int temperature_proc_event(struct hid_sensor_hub_device *hsdev, + unsigned int usage_id, void *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct temperature_state *temperature_state = iio_priv(indio_dev); + + if (atomic_read(&temperature_state->common_attributes.data_ready)) + iio_push_to_buffers(indio_dev, + &temperature_state->temperature_data); + return 0; +} + +/* Capture samples in local storage */ +static int temperature_capture_sample(struct hid_sensor_hub_device *hsdev, + unsigned int usage_id, size_t raw_len, + char *raw_data, void *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct temperature_state *temperature_state = iio_priv(indio_dev); + + switch (usage_id) { + case HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE: + temperature_state->temperature_data = *(s32 *)raw_data; + return 0; + default: + return -EINVAL; + } +} + +/* Parse report which is specific to an usage id*/ +static int temperature_parse_report(struct platform_device *pdev, + struct hid_sensor_hub_device *hsdev, + struct iio_chan_spec *channels, + unsigned int usage_id, + struct temperature_state *st) +{ + int ret; + + ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT, + usage_id, + HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE, + &st->temperature_attr); + if (ret < 0) + return ret; + + temperature_adjust_channel_bit_mask(channels, 0, + st->temperature_attr.size); + + st->scale_precision = hid_sensor_format_scale( + HID_USAGE_SENSOR_TEMPERATURE, + &st->temperature_attr, + &st->scale_pre_decml, &st->scale_post_decml); + + /* Set Sensitivity field ids, when there is no individual modifier */ + if (st->common_attributes.sensitivity.index < 0) + sensor_hub_input_get_attribute_info(hsdev, + HID_FEATURE_REPORT, usage_id, + HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | + HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE, + &st->common_attributes.sensitivity); + + return ret; +} + +static struct hid_sensor_hub_callbacks temperature_callbacks = { + .send_event = &temperature_proc_event, + .capture_sample = &temperature_capture_sample, +}; + +/* Function to initialize the processing for usage id */ +static int hid_temperature_probe(struct platform_device *pdev) +{ + static const char *name = "temperature"; + struct iio_dev *indio_dev; + struct temperature_state *temperature_state; + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct temperature_state)); + if (!indio_dev) + return -ENOMEM; + + temperature_state = iio_priv(indio_dev); + temperature_state->common_attributes.hsdev = hsdev; + temperature_state->common_attributes.pdev = pdev; + + ret = hid_sensor_parse_common_attributes(hsdev, + HID_USAGE_SENSOR_TEMPERATURE, + &temperature_state->common_attributes); + if (ret) + return ret; + + indio_dev->channels = devm_kmemdup(&indio_dev->dev, + temperature_channels, + sizeof(temperature_channels), + GFP_KERNEL); + if (!indio_dev->channels) + return -ENOMEM; + + ret = temperature_parse_report(pdev, hsdev, + (struct iio_chan_spec *)indio_dev->channels, + HID_USAGE_SENSOR_TEMPERATURE, + temperature_state); + if (ret) + return ret; + + indio_dev->num_channels = ARRAY_SIZE(temperature_channels); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &temperature_info; + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = devm_iio_triggered_buffer_setup(&pdev->dev, indio_dev, + &iio_pollfunc_store_time, + NULL, NULL); + if (ret) + return ret; + + atomic_set(&temperature_state->common_attributes.data_ready, 0); + ret = hid_sensor_setup_trigger(indio_dev, name, + &temperature_state->common_attributes); + if (ret) + goto error_unreg_buffer; + + platform_set_drvdata(pdev, indio_dev); + + temperature_callbacks.pdev = pdev; + ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE, + &temperature_callbacks); + if (ret) + goto error_unreg_buffer; + + ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev); + if (ret) + goto error_unreg_buffer_and_callback; + + return ret; + +error_unreg_buffer_and_callback: + sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE); +error_unreg_buffer: + iio_triggered_buffer_cleanup(indio_dev); + return ret; +} + +/* Function to deinitialize the processing for usage id */ +static int hid_temperature_remove(struct platform_device *pdev) +{ + struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct temperature_state *temperature_state = iio_priv(indio_dev); + + sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE); + hid_sensor_remove_trigger(&temperature_state->common_attributes); + + return 0; +} + +static const struct platform_device_id hid_temperature_ids[] = { + { + /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ + .name = "HID-SENSOR-200033", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, hid_temperature_ids); + +static struct platform_driver hid_temperature_platform_driver = { + .id_table = hid_temperature_ids, + .driver = { + .name = KBUILD_MODNAME, + .pm = &hid_sensor_pm_ops, + }, + .probe = hid_temperature_probe, + .remove = hid_temperature_remove, +}; +module_platform_driver(hid_temperature_platform_driver); + +MODULE_DESCRIPTION("HID Environmental temperature sensor"); +MODULE_AUTHOR("Song Hongyan <hongyan.song@intel.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h index bab8375..ecec978 100644 --- a/include/linux/hid-sensor-ids.h +++ b/include/linux/hid-sensor-ids.h @@ -45,6 +45,10 @@ #define HID_USAGE_SENSOR_DATA_ATMOSPHERIC_PRESSURE 0x200430 #define HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE 0x200431 +/* Tempreture (200033) */ +#define HID_USAGE_SENSOR_TEMPERATURE 0x200033 +#define HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE 0x200434 + /* Gyro 3D: (200076) */ #define HID_USAGE_SENSOR_GYRO_3D 0x200076 #define HID_USAGE_SENSOR_DATA_ANGL_VELOCITY 0x200456
Environmental temperature sensor is a hid defined sensor, it measures temperature. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR39b.pdf According to IIO ABI definition, IIO_TEMP data output unit is milli degrees Celsius. Add the unit convert from degree to milli degree. Signed-off-by: Song Hongyan <hongyan.song@intel.com> --- changes note: capture_sample and proc_event parameter "priv" only renamed to "pdev". Since the callback will be called with platform_device * of the mfd device. .../iio/common/hid-sensors/hid-sensor-attributes.c | 3 + drivers/iio/temperature/Kconfig | 14 + drivers/iio/temperature/Makefile | 1 + drivers/iio/temperature/hid-sensor-temperature.c | 326 +++++++++++++++++++++ include/linux/hid-sensor-ids.h | 4 + 5 files changed, 348 insertions(+) create mode 100644 drivers/iio/temperature/hid-sensor-temperature.c