diff mbox series

[2/2] dt-bindings: egalax-ts: add support for wakeup event action

Message ID 1536139607-16848-2-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State New, archived
Headers show
Series [1/2] input: egalax_ts: add system wakeup support | expand

Commit Message

Anson Huang Sept. 5, 2018, 9:26 a.m. UTC
Add support for wakeup event action, this would allow the device
to configure whether to be a wakeup source of system suspend.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt | 2 ++
 1 file changed, 2 insertions(+)

Comments

Dmitry Torokhov Sept. 17, 2018, 6:07 p.m. UTC | #1
On Sun, Sep 16, 2018 at 05:54:33PM -0500, Rob Herring wrote:
> On Wed, Sep 05, 2018 at 05:26:47PM +0800, Anson Huang wrote:
> > Add support for wakeup event action, this would allow the device
> > to configure whether to be a wakeup source of system suspend.
> > 
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
> > index 92fb262..296a9cd 100644
> > --- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
> > +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
> > @@ -6,6 +6,7 @@ Required properties:
> >  - interrupts: touch controller interrupt
> >  - wakeup-gpios: the gpio pin to be used for waking up the controller
> >    and also used as irq pin
> 
> If the wakeup gpio is the same as the irq, then this should be removed 
> since wakeup-source replaces it.

No, it does not: it is GPIO that we need to toggle to wake up the
controller, not host, and we do not have generic API to map from IRQ to
GPIO.

This is also existing binding...

> 
> > +- wakeup-source: boolean, touch screen can wake-up the system
> >  
> >  Example:
> >  
> > @@ -15,4 +16,5 @@ Example:
> >  		interrupt-parent = <&gpio1>;
> >  		interrupts = <9 2>;
> >  		wakeup-gpios = <&gpio1 9 0>;
> > +		wakeup-source;
> >  	};
> > -- 
> > 2.7.4
> > 
>
Rob Herring (Arm) Sept. 19, 2018, 1:01 a.m. UTC | #2
On Mon, Sep 17, 2018 at 11:07 AM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
>
> On Sun, Sep 16, 2018 at 05:54:33PM -0500, Rob Herring wrote:
> > On Wed, Sep 05, 2018 at 05:26:47PM +0800, Anson Huang wrote:
> > > Add support for wakeup event action, this would allow the device
> > > to configure whether to be a wakeup source of system suspend.
> > >
> > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > > ---
> > >  Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt | 2 ++
> > >  1 file changed, 2 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
> > > index 92fb262..296a9cd 100644
> > > --- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
> > > +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
> > > @@ -6,6 +6,7 @@ Required properties:
> > >  - interrupts: touch controller interrupt
> > >  - wakeup-gpios: the gpio pin to be used for waking up the controller
> > >    and also used as irq pin
> >
> > If the wakeup gpio is the same as the irq, then this should be removed
> > since wakeup-source replaces it.
>
> No, it does not: it is GPIO that we need to toggle to wake up the
> controller, not host, and we do not have generic API to map from IRQ to
> GPIO.

Ah, okay.

> This is also existing binding...

Right, I meant removed as in moved to deprecated. Sometimes we just
remove the documentation when deprecating.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
index 92fb262..296a9cd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -6,6 +6,7 @@  Required properties:
 - interrupts: touch controller interrupt
 - wakeup-gpios: the gpio pin to be used for waking up the controller
   and also used as irq pin
+- wakeup-source: boolean, touch screen can wake-up the system
 
 Example:
 
@@ -15,4 +16,5 @@  Example:
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 2>;
 		wakeup-gpios = <&gpio1 9 0>;
+		wakeup-source;
 	};