@@ -1311,4 +1311,14 @@ config TOUCHSCREEN_ROHM_BU21023
To compile this driver as a module, choose M here: the
module will be called bu21023_ts.
+config TOUCHSCREEN_IQS5XX
+ tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
+ depends on I2C
+ help
+ Say Y to enable support for the Azoteq IQS550/572/525
+ family of trackpad/touchscreen controllers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called iqs5xx.
+
endif
@@ -110,3 +110,4 @@ obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50) += colibri-vf50-ts.o
obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o
obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW) += raspberrypi-ts.o
+obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o
new file mode 100644
@@ -0,0 +1,1116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
+ *
+ * Copyright (C) 2018
+ * Author: Jeff LaBundy <jeff@labundy.com>
+ *
+ * These devices require firmware exported from a PC-based configuration tool
+ * made available by the vendor. Firmware files may be pushed to the device's
+ * nonvolatile memory by writing the filename to the 'fw_file' sysfs control.
+ *
+ * Link to PC-based configuration tool and data sheet: http://www.azoteq.com/
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#define IQS5XX_FW_FILE_LEN 64
+#define IQS5XX_NUM_RETRIES 10
+#define IQS5XX_NUM_POINTS 256
+#define IQS5XX_NUM_CONTACTS 5
+#define IQS5XX_WR_BYTES_MAX 2
+
+#define IQS5XX_PROD_NUM_IQS550 40
+#define IQS5XX_PROD_NUM_IQS572 58
+#define IQS5XX_PROD_NUM_IQS525 52
+#define IQS5XX_PROJ_NUM_A000 0
+#define IQS5XX_PROJ_NUM_B000 15
+#define IQS5XX_MAJOR_VER_MIN 2
+
+#define IQS5XX_RESUME 0x00
+#define IQS5XX_SUSPEND 0x01
+
+#define IQS5XX_SW_INPUT_EVENT 0x10
+#define IQS5XX_SETUP_COMPLETE 0x40
+#define IQS5XX_EVENT_MODE 0x01
+#define IQS5XX_TP_EVENT 0x04
+
+#define IQS5XX_FLIP_X 0x01
+#define IQS5XX_FLIP_Y 0x02
+#define IQS5XX_SWITCH_XY_AXIS 0x04
+
+#define IQS5XX_PROD_NUM 0x0000
+#define IQS5XX_ABS_X 0x0016
+#define IQS5XX_ABS_Y 0x0018
+#define IQS5XX_SYS_CTRL0 0x0431
+#define IQS5XX_SYS_CTRL1 0x0432
+#define IQS5XX_SYS_CFG0 0x058E
+#define IQS5XX_SYS_CFG1 0x058F
+#define IQS5XX_TOTAL_RX 0x063D
+#define IQS5XX_TOTAL_TX 0x063E
+#define IQS5XX_XY_CFG0 0x0669
+#define IQS5XX_X_RES 0x066E
+#define IQS5XX_Y_RES 0x0670
+#define IQS5XX_CHKSM 0x83C0
+#define IQS5XX_APP 0x8400
+#define IQS5XX_CSTM 0xBE00
+#define IQS5XX_PMAP_END 0xBFFF
+#define IQS5XX_END_COMM 0xEEEE
+
+#define IQS5XX_CHKSM_LEN (IQS5XX_APP - IQS5XX_CHKSM)
+#define IQS5XX_APP_LEN (IQS5XX_CSTM - IQS5XX_APP)
+#define IQS5XX_CSTM_LEN (IQS5XX_PMAP_END + 1 - IQS5XX_CSTM)
+#define IQS5XX_PMAP_LEN (IQS5XX_PMAP_END + 1 - IQS5XX_CHKSM)
+
+#define IQS5XX_REC_HDR_LEN 4
+#define IQS5XX_REC_LEN_MAX 256
+#define IQS5XX_REC_TYPE_DATA 0x00
+#define IQS5XX_REC_TYPE_EOF 0x01
+
+#define IQS5XX_BL_ADDR_MASK 0x40
+#define IQS5XX_BL_CMD_VER 0x00
+#define IQS5XX_BL_CMD_READ 0x01
+#define IQS5XX_BL_CMD_EXEC 0x02
+#define IQS5XX_BL_CMD_CRC 0x03
+#define IQS5XX_BL_BLK_LEN_MAX 64
+#define IQS5XX_BL_ID 0x0200
+#define IQS5XX_BL_STATUS_RESET 0x00
+#define IQS5XX_BL_STATUS_AVAIL 0xA5
+#define IQS5XX_BL_STATUS_NONE 0xEE
+#define IQS5XX_BL_CRC_PASS 0x00
+#define IQS5XX_BL_CRC_FAIL 0x01
+#define IQS5XX_BL_ATTEMPTS 3
+
+struct iqs5xx_private {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct gpio_desc *reset_gpio;
+ struct mutex lock;
+ u8 bl_status;
+};
+
+struct iqs5xx_dev_id_info {
+ __be16 prod_num;
+ __be16 proj_num;
+ u8 major_ver;
+ u8 minor_ver;
+ u8 bl_status;
+} __packed;
+
+struct iqs5xx_ihex_rec {
+ char start;
+ char len[2];
+ char addr[4];
+ char type[2];
+ char data[2];
+} __packed;
+
+struct iqs5xx_touch_data {
+ __be16 abs_x;
+ __be16 abs_y;
+ __be16 strength;
+ u8 area;
+} __packed;
+
+static int iqs5xx_read_burst(struct i2c_client *client,
+ u16 reg, void *val, u8 len)
+{
+ __be16 reg_buf = cpu_to_be16(reg);
+ int ret, i;
+ struct i2c_msg msg[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = sizeof(reg_buf),
+ .buf = (u8 *)®_buf,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = len,
+ .buf = (u8 *)val,
+ },
+ };
+
+ /*
+ * The first addressing attempt outside of a communication window fails
+ * and must be retried, after which the device clock stretches until it
+ * is available.
+ */
+ for (i = 0; i < IQS5XX_NUM_RETRIES; i++) {
+ ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+ if (ret == ARRAY_SIZE(msg))
+ return 0;
+
+ usleep_range(200, 300);
+ }
+
+ if (ret >= 0)
+ ret = -EIO;
+
+ dev_err(&client->dev, "Failed to read from address 0x%04X: %d\n",
+ reg, ret);
+
+ return ret;
+}
+
+static int iqs5xx_read_word(struct i2c_client *client, u16 reg, u16 *val)
+{
+ __be16 val_buf;
+ int error;
+
+ error = iqs5xx_read_burst(client, reg, &val_buf, sizeof(val_buf));
+ if (error)
+ return error;
+
+ *val = be16_to_cpu(val_buf);
+
+ return 0;
+}
+
+static int iqs5xx_read_byte(struct i2c_client *client, u16 reg, u8 *val)
+{
+ return iqs5xx_read_burst(client, reg, val, sizeof(*val));
+}
+
+static int iqs5xx_write_burst(struct i2c_client *client,
+ u16 reg, const void *val, u8 len)
+{
+ int ret, i;
+ u8 mlen = sizeof(reg) + len;
+ u8 mbuf[sizeof(reg) + IQS5XX_WR_BYTES_MAX];
+
+ if (len > IQS5XX_WR_BYTES_MAX)
+ return -EINVAL;
+
+ put_unaligned_be16(reg, mbuf);
+ memcpy(mbuf + sizeof(reg), val, len);
+
+ /*
+ * The first addressing attempt outside of a communication window fails
+ * and must be retried, after which the device clock stretches until it
+ * is available.
+ */
+ for (i = 0; i < IQS5XX_NUM_RETRIES; i++) {
+ ret = i2c_master_send(client, (char *)mbuf, mlen);
+ if (ret == mlen)
+ return 0;
+
+ usleep_range(200, 300);
+ }
+
+ if (ret >= 0)
+ ret = -EIO;
+
+ dev_err(&client->dev, "Failed to write to address 0x%04X: %d\n",
+ reg, ret);
+
+ return ret;
+}
+
+static int iqs5xx_write_word(struct i2c_client *client, u16 reg, u16 val)
+{
+ __be16 val_buf = cpu_to_be16(val);
+
+ return iqs5xx_write_burst(client, reg, &val_buf, sizeof(val_buf));
+}
+
+static int iqs5xx_write_byte(struct i2c_client *client, u16 reg, u8 val)
+{
+ return iqs5xx_write_burst(client, reg, &val, sizeof(val));
+}
+
+static void iqs5xx_reset(struct i2c_client *client)
+{
+ struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
+
+ gpiod_set_value_cansleep(iqs5xx->reset_gpio, 0);
+ usleep_range(200, 300);
+
+ gpiod_set_value_cansleep(iqs5xx->reset_gpio, 1);
+}
+
+static int iqs5xx_bl_cmd(struct i2c_client *client, u8 bl_cmd, u16 bl_addr)
+{
+ struct i2c_msg msg;
+ int ret;
+ u8 mbuf[sizeof(bl_cmd) + sizeof(bl_addr)];
+
+ msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK;
+ msg.flags = 0;
+ msg.len = sizeof(bl_cmd);
+ msg.buf = mbuf;
+
+ *mbuf = bl_cmd;
+
+ switch (bl_cmd) {
+ case IQS5XX_BL_CMD_VER:
+ case IQS5XX_BL_CMD_CRC:
+ case IQS5XX_BL_CMD_EXEC:
+ break;
+ case IQS5XX_BL_CMD_READ:
+ msg.len += sizeof(bl_addr);
+ put_unaligned_be16(bl_addr, mbuf + sizeof(bl_cmd));
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret != 1)
+ goto msg_fail;
+
+ switch (bl_cmd) {
+ case IQS5XX_BL_CMD_VER:
+ msg.len = sizeof(u16);
+ break;
+ case IQS5XX_BL_CMD_CRC:
+ msg.len = sizeof(u8);
+ /*
+ * This delay saves the bus controller the trouble of having to
+ * tolerate a relatively long clock-stretching period while the
+ * CRC is calculated.
+ */
+ msleep(50);
+ break;
+ case IQS5XX_BL_CMD_EXEC:
+ usleep_range(10000, 10100);
+ /* intentionally fall through */
+ default:
+ return 0;
+ }
+
+ msg.flags = I2C_M_RD;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret != 1)
+ goto msg_fail;
+
+ if (bl_cmd == IQS5XX_BL_CMD_VER
+ && get_unaligned_be16(mbuf) != IQS5XX_BL_ID) {
+ dev_err(&client->dev, "Unexpected bootloader ID: 0x%04X\n",
+ get_unaligned_be16(mbuf));
+ return -EINVAL;
+ }
+
+ if (bl_cmd == IQS5XX_BL_CMD_CRC && *mbuf != IQS5XX_BL_CRC_PASS) {
+ dev_err(&client->dev, "Bootloader CRC failed\n");
+ return -EIO;
+ }
+
+ return 0;
+
+msg_fail:
+ if (ret >= 0)
+ ret = -EIO;
+
+ if (bl_cmd != IQS5XX_BL_CMD_VER)
+ dev_err(&client->dev,
+ "Unsuccessful bootloader command 0x%02X: %d\n",
+ bl_cmd, ret);
+
+ return ret;
+}
+
+static int iqs5xx_bl_open(struct i2c_client *client)
+{
+ int error, i, j;
+
+ /*
+ * The device opens a bootloader polling window for 2 ms following the
+ * release of reset. If the host cannot establish communication during
+ * this time frame, it must cycle reset again.
+ */
+ for (i = 0; i < IQS5XX_BL_ATTEMPTS; i++) {
+ iqs5xx_reset(client);
+
+ for (j = 0; j < IQS5XX_NUM_RETRIES; j++) {
+ error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_VER, 0);
+ if (!error || error == -EINVAL)
+ return error;
+ }
+ }
+
+ dev_err(&client->dev, "Failed to open bootloader: %d\n", error);
+
+ return error;
+}
+
+static int iqs5xx_bl_write(struct i2c_client *client,
+ u16 bl_addr, u8 *pmap_data, u16 pmap_len)
+{
+ struct i2c_msg msg;
+ int ret, i;
+ u8 mbuf[sizeof(bl_addr) + IQS5XX_BL_BLK_LEN_MAX];
+
+ if (pmap_len % IQS5XX_BL_BLK_LEN_MAX)
+ return -EINVAL;
+
+ msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK;
+ msg.flags = 0;
+ msg.len = ARRAY_SIZE(mbuf);
+ msg.buf = mbuf;
+
+ for (i = 0; i < pmap_len; i += IQS5XX_BL_BLK_LEN_MAX) {
+ put_unaligned_be16(bl_addr + i, mbuf);
+ memcpy(mbuf + sizeof(bl_addr),
+ pmap_data + i, IQS5XX_BL_BLK_LEN_MAX);
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret != 1)
+ goto msg_fail;
+
+ usleep_range(10000, 10100);
+ }
+
+ return 0;
+
+msg_fail:
+ if (ret >= 0)
+ ret = -EIO;
+
+ dev_err(&client->dev, "Failed to write block at address 0x%04X: %d\n",
+ bl_addr + i, ret);
+
+ return ret;
+}
+
+static int iqs5xx_bl_verify(struct i2c_client *client,
+ u16 bl_addr, u8 *pmap_data, u16 pmap_len)
+{
+ struct i2c_msg msg;
+ int ret, i;
+ u8 bl_data[IQS5XX_BL_BLK_LEN_MAX];
+
+ if (pmap_len % IQS5XX_BL_BLK_LEN_MAX)
+ return -EINVAL;
+
+ msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK;
+ msg.flags = I2C_M_RD;
+ msg.len = IQS5XX_BL_BLK_LEN_MAX;
+ msg.buf = bl_data;
+
+ for (i = 0; i < pmap_len; i += IQS5XX_BL_BLK_LEN_MAX) {
+ ret = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_READ, bl_addr + i);
+ if (ret)
+ return ret;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret != 1)
+ goto msg_fail;
+
+ if (memcmp(bl_data, pmap_data + i, IQS5XX_BL_BLK_LEN_MAX)) {
+ dev_err(&client->dev,
+ "Failed to verify block at address 0x%04X\n",
+ bl_addr + i);
+ return -EIO;
+ }
+ }
+
+ return 0;
+
+msg_fail:
+ if (ret >= 0)
+ ret = -EIO;
+
+ dev_err(&client->dev, "Failed to read block at address 0x%04X: %d\n",
+ bl_addr + i, ret);
+
+ return ret;
+}
+
+static int iqs5xx_set_state(struct i2c_client *client, u8 state)
+{
+ struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
+ int error1, error2;
+
+ if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
+ return 0;
+
+ mutex_lock(&iqs5xx->lock);
+
+ /*
+ * Addressing the device outside of a communication window prompts it
+ * to assert the RDY output, so disable the interrupt line to prevent
+ * the handler from servicing a false interrupt.
+ */
+ disable_irq(client->irq);
+
+ error1 = iqs5xx_write_byte(client, IQS5XX_SYS_CTRL1, state);
+ error2 = iqs5xx_write_byte(client, IQS5XX_END_COMM, 0);
+
+ usleep_range(50, 100);
+ enable_irq(client->irq);
+
+ mutex_unlock(&iqs5xx->lock);
+
+ if (error1)
+ return error1;
+
+ return error2;
+}
+
+static int iqs5xx_open(struct input_dev *input)
+{
+ struct iqs5xx_private *iqs5xx = input_get_drvdata(input);
+
+ return iqs5xx_set_state(iqs5xx->client, IQS5XX_RESUME);
+}
+
+static void iqs5xx_close(struct input_dev *input)
+{
+ struct iqs5xx_private *iqs5xx = input_get_drvdata(input);
+
+ iqs5xx_set_state(iqs5xx->client, IQS5XX_SUSPEND);
+}
+
+static int iqs5xx_axis_init(struct i2c_client *client)
+{
+ struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
+ struct touchscreen_properties prop;
+ struct input_dev *input;
+ int error;
+ u16 max_x, max_x_hw;
+ u16 max_y, max_y_hw;
+ u8 val;
+
+ if (!iqs5xx->input) {
+ input = devm_input_allocate_device(&client->dev);
+ if (!input)
+ return -ENOMEM;
+
+ input->name = client->name;
+ input->id.bustype = BUS_I2C;
+ input->open = iqs5xx_open;
+ input->close = iqs5xx_close;
+
+ input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
+ input_set_capability(input, EV_ABS, ABS_MT_PRESSURE);
+
+ error = input_mt_init_slots(input,
+ IQS5XX_NUM_CONTACTS, INPUT_MT_DIRECT);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to initialize slots: %d\n",
+ error);
+ return error;
+ }
+
+ input_set_drvdata(input, iqs5xx);
+ iqs5xx->input = input;
+ }
+
+ touchscreen_parse_properties(iqs5xx->input, true, &prop);
+
+ error = iqs5xx_read_byte(client, IQS5XX_TOTAL_RX, &val);
+ if (error)
+ return error;
+ max_x_hw = (val - 1) * IQS5XX_NUM_POINTS;
+
+ error = iqs5xx_read_byte(client, IQS5XX_TOTAL_TX, &val);
+ if (error)
+ return error;
+ max_y_hw = (val - 1) * IQS5XX_NUM_POINTS;
+
+ error = iqs5xx_read_byte(client, IQS5XX_XY_CFG0, &val);
+ if (error)
+ return error;
+
+ if (val & IQS5XX_SWITCH_XY_AXIS)
+ swap(max_x_hw, max_y_hw);
+
+ if (prop.swap_x_y)
+ val ^= IQS5XX_SWITCH_XY_AXIS;
+
+ if (prop.invert_x)
+ val ^= prop.swap_x_y ? IQS5XX_FLIP_Y : IQS5XX_FLIP_X;
+
+ if (prop.invert_y)
+ val ^= prop.swap_x_y ? IQS5XX_FLIP_X : IQS5XX_FLIP_Y;
+
+ error = iqs5xx_write_byte(client, IQS5XX_XY_CFG0, val);
+ if (error)
+ return error;
+
+ if (prop.max_x > max_x_hw) {
+ dev_err(&client->dev, "Invalid maximum x-coordinate: %u > %u\n",
+ prop.max_x, max_x_hw);
+ return -EINVAL;
+ } else if (prop.max_x == 0) {
+ error = iqs5xx_read_word(client, IQS5XX_X_RES, &max_x);
+ if (error)
+ return error;
+
+ input_abs_set_max(iqs5xx->input, prop.swap_x_y ?
+ ABS_MT_POSITION_Y : ABS_MT_POSITION_X, max_x);
+ } else {
+ max_x = (u16)prop.max_x;
+ }
+
+ if (prop.max_y > max_y_hw) {
+ dev_err(&client->dev, "Invalid maximum y-coordinate: %u > %u\n",
+ prop.max_y, max_y_hw);
+ return -EINVAL;
+ } else if (prop.max_y == 0) {
+ error = iqs5xx_read_word(client, IQS5XX_Y_RES, &max_y);
+ if (error)
+ return error;
+
+ input_abs_set_max(iqs5xx->input, prop.swap_x_y ?
+ ABS_MT_POSITION_X : ABS_MT_POSITION_Y, max_y);
+ } else {
+ max_y = (u16)prop.max_y;
+ }
+
+ /*
+ * Write horizontal and vertical resolution to the device in case its
+ * original defaults were overridden or swapped as per the properties
+ * specified in the device tree.
+ */
+ error = iqs5xx_write_word(client,
+ prop.swap_x_y ? IQS5XX_Y_RES : IQS5XX_X_RES, max_x);
+ if (error)
+ return error;
+
+ return iqs5xx_write_word(client,
+ prop.swap_x_y ? IQS5XX_X_RES : IQS5XX_Y_RES, max_y);
+}
+
+static int iqs5xx_dev_init(struct i2c_client *client)
+{
+ struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
+ struct iqs5xx_dev_id_info *dev_id_info;
+ int error;
+ u8 val;
+ u8 buf[sizeof(*dev_id_info) + 1];
+
+ error = iqs5xx_read_burst(client,
+ IQS5XX_PROD_NUM, &buf[1], sizeof(*dev_id_info));
+ if (error)
+ return iqs5xx_bl_open(client);
+
+ /*
+ * A000 and B000 devices use 8-bit and 16-bit addressing, respectively.
+ * Querying an A000 device's version information with 16-bit addressing
+ * gives the appearance that the data is shifted by one byte; a nonzero
+ * leading array element suggests this could be the case (in which case
+ * the missing zero is prepended).
+ */
+ buf[0] = 0;
+ dev_id_info = (struct iqs5xx_dev_id_info *)&buf[(buf[1] > 0) ? 0 : 1];
+
+ switch (be16_to_cpu(dev_id_info->prod_num)) {
+ case IQS5XX_PROD_NUM_IQS550:
+ case IQS5XX_PROD_NUM_IQS572:
+ case IQS5XX_PROD_NUM_IQS525:
+ break;
+ default:
+ dev_err(&client->dev, "Unrecognized product number: %u\n",
+ be16_to_cpu(dev_id_info->prod_num));
+ return -EINVAL;
+ }
+
+ switch (be16_to_cpu(dev_id_info->proj_num)) {
+ case IQS5XX_PROJ_NUM_A000:
+ dev_err(&client->dev, "Unsupported project number: %u\n",
+ be16_to_cpu(dev_id_info->proj_num));
+ return iqs5xx_bl_open(client);
+ case IQS5XX_PROJ_NUM_B000:
+ break;
+ default:
+ dev_err(&client->dev, "Unrecognized project number: %u\n",
+ be16_to_cpu(dev_id_info->proj_num));
+ return -EINVAL;
+ }
+
+ if (dev_id_info->major_ver < IQS5XX_MAJOR_VER_MIN) {
+ dev_err(&client->dev, "Unsupported major version: %u\n",
+ dev_id_info->major_ver);
+ return iqs5xx_bl_open(client);
+ }
+
+ error = iqs5xx_axis_init(client);
+ if (error)
+ return error;
+
+ error = iqs5xx_read_byte(client, IQS5XX_SYS_CFG0, &val);
+ if (error)
+ return error;
+
+ val |= IQS5XX_SETUP_COMPLETE;
+ val &= ~IQS5XX_SW_INPUT_EVENT;
+ error = iqs5xx_write_byte(client, IQS5XX_SYS_CFG0, val);
+ if (error)
+ return error;
+
+ val = IQS5XX_TP_EVENT | IQS5XX_EVENT_MODE;
+ error = iqs5xx_write_byte(client, IQS5XX_SYS_CFG1, val);
+ if (error)
+ return error;
+
+ error = iqs5xx_write_byte(client, IQS5XX_END_COMM, 0);
+ if (error)
+ return error;
+
+ iqs5xx->bl_status = dev_id_info->bl_status;
+
+ /*
+ * Closure of the first communication window that appears following the
+ * release of reset appears to kick off an initialization period during
+ * which further communication is met with clock stretching. The return
+ * from this function is delayed so that further communication attempts
+ * avoid this period.
+ */
+ msleep(100);
+
+ return 0;
+}
+
+static irqreturn_t iqs5xx_irq(int irq, void *data)
+{
+ struct iqs5xx_private *iqs5xx = (struct iqs5xx_private *)data;
+ struct iqs5xx_touch_data *touch_data;
+ struct i2c_client *client = iqs5xx->client;
+ struct input_dev *input = iqs5xx->input;
+ int error, i;
+ u8 buf[sizeof(*touch_data) * IQS5XX_NUM_CONTACTS];
+
+ if (!input || iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
+ return IRQ_HANDLED;
+
+ error = iqs5xx_read_burst(client, IQS5XX_ABS_X, buf, ARRAY_SIZE(buf));
+ if (error)
+ return IRQ_NONE;
+
+ for (i = 0, touch_data = (struct iqs5xx_touch_data *)buf;
+ i < IQS5XX_NUM_CONTACTS; i++, touch_data++) {
+ input_mt_slot(input, i);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER,
+ be16_to_cpu(touch_data->strength) > 0);
+
+ if (!be16_to_cpu(touch_data->strength))
+ continue;
+
+ input_report_abs(input, ABS_MT_POSITION_X,
+ be16_to_cpu(touch_data->abs_x));
+ input_report_abs(input, ABS_MT_POSITION_Y,
+ be16_to_cpu(touch_data->abs_y));
+ input_report_abs(input, ABS_MT_PRESSURE,
+ be16_to_cpu(touch_data->strength));
+ }
+
+ input_mt_sync_frame(input);
+ input_sync(input);
+
+ error = iqs5xx_write_byte(client, IQS5XX_END_COMM, 0);
+ if (error)
+ return IRQ_NONE;
+
+ /*
+ * Once the communication window is closed, a small delay is added to
+ * ensure the device's RDY output has been deasserted by the time the
+ * interrupt handler returns.
+ */
+ usleep_range(50, 100);
+
+ return IRQ_HANDLED;
+}
+
+static int iqs5xx_fw_file_parse(struct i2c_client *client,
+ const char *fw_file, u8 *pmap)
+{
+ const struct firmware *fw;
+ struct iqs5xx_ihex_rec *rec;
+ size_t pos = 0;
+ int error, i;
+ u16 rec_num = 1;
+ u16 rec_addr;
+ u8 rec_len, rec_type, rec_chksm, chksm;
+ u8 rec_hdr[IQS5XX_REC_HDR_LEN];
+ u8 rec_data[IQS5XX_REC_LEN_MAX];
+
+ /*
+ * Firmware exported from the vendor's configuration tool deviates from
+ * standard ihex as follows: (1) the checksum for records corresponding
+ * to user-exported settings is not recalculated, and (2) an address of
+ * 0xFFFF is used for the EOF record.
+ *
+ * Because the ihex2fw tool tolerates neither (1) nor (2), the slightly
+ * nonstandard ihex firmware is parsed directly by the driver.
+ */
+ error = request_firmware(&fw, fw_file, &client->dev);
+ if (error) {
+ dev_err(&client->dev, "Failed to request firmware %s: %d\n",
+ fw_file, error);
+ return error;
+ }
+
+ do {
+ if (pos + sizeof(*rec) > fw->size) {
+ dev_err(&client->dev, "Insufficient firmware size\n");
+ error = -EINVAL;
+ break;
+ }
+ rec = (struct iqs5xx_ihex_rec *)(fw->data + pos);
+ pos += sizeof(*rec);
+
+ if (rec->start != ':') {
+ dev_err(&client->dev, "Invalid start at record %u\n",
+ rec_num);
+ error = -EINVAL;
+ break;
+ }
+
+ error = hex2bin(rec_hdr, rec->len, ARRAY_SIZE(rec_hdr));
+ if (error) {
+ dev_err(&client->dev, "Invalid header at record %u\n",
+ rec_num);
+ break;
+ }
+
+ rec_len = *rec_hdr;
+ rec_addr = get_unaligned_be16(rec_hdr + sizeof(rec_len));
+ rec_type = *(rec_hdr + sizeof(rec_len) + sizeof(rec_addr));
+
+ if (pos + rec_len * 2 > fw->size) {
+ dev_err(&client->dev, "Insufficient firmware size\n");
+ error = -EINVAL;
+ break;
+ }
+ pos += (rec_len * 2);
+
+ error = hex2bin(rec_data, rec->data, rec_len);
+ if (error) {
+ dev_err(&client->dev, "Invalid data at record %u\n",
+ rec_num);
+ break;
+ }
+
+ error = hex2bin(&rec_chksm, rec->data + rec_len * 2, 1);
+ if (error) {
+ dev_err(&client->dev, "Invalid checksum at record %u\n",
+ rec_num);
+ break;
+ }
+
+ chksm = 0;
+ for (i = 0; i < ARRAY_SIZE(rec_hdr); i++)
+ chksm += rec_hdr[i];
+ for (i = 0; i < rec_len; i++)
+ chksm += rec_data[i];
+ chksm = ~chksm + 1;
+
+ if (chksm != rec_chksm && rec_addr < IQS5XX_CSTM) {
+ dev_err(&client->dev,
+ "Incorrect checksum at record %u\n",
+ rec_num);
+ error = -EINVAL;
+ break;
+ }
+
+ switch (rec_type) {
+ case IQS5XX_REC_TYPE_DATA:
+ if (rec_addr < IQS5XX_CHKSM
+ || rec_addr > IQS5XX_PMAP_END) {
+ dev_err(&client->dev,
+ "Invalid address at record %u\n",
+ rec_num);
+ error = -EINVAL;
+ } else {
+ memcpy(pmap + rec_addr - IQS5XX_CHKSM,
+ rec_data, rec_len);
+ }
+ break;
+ case IQS5XX_REC_TYPE_EOF:
+ break;
+ default:
+ dev_err(&client->dev, "Invalid type at record %u\n",
+ rec_num);
+ error = -EINVAL;
+ }
+
+ if (error)
+ break;
+
+ rec_num++;
+ while (pos < fw->size) {
+ if (*(fw->data + pos) == ':')
+ break;
+ pos++;
+ }
+ } while (rec_type != IQS5XX_REC_TYPE_EOF);
+
+ release_firmware(fw);
+
+ return error;
+}
+
+static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
+{
+ struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
+ int error;
+ u8 *pmap;
+
+ if (iqs5xx->bl_status == IQS5XX_BL_STATUS_NONE)
+ return -EPERM;
+
+ pmap = kzalloc(IQS5XX_PMAP_LEN, GFP_KERNEL);
+ if (!pmap)
+ return -ENOMEM;
+
+ error = iqs5xx_fw_file_parse(client, fw_file, pmap);
+ if (error)
+ goto err_kfree;
+
+ mutex_lock(&iqs5xx->lock);
+
+ iqs5xx->bl_status = IQS5XX_BL_STATUS_RESET;
+
+ error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_VER, 0);
+ switch (error) {
+ case 0:
+ break;
+ case -EINVAL:
+ goto err_mutex;
+ default:
+ error = iqs5xx_bl_open(client);
+ if (error)
+ goto err_mutex;
+ }
+
+ error = iqs5xx_bl_write(client, IQS5XX_CHKSM, pmap, IQS5XX_PMAP_LEN);
+ if (error)
+ goto err_mutex;
+
+ error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_CRC, 0);
+ if (error)
+ goto err_mutex;
+
+ error = iqs5xx_bl_verify(client, IQS5XX_CSTM,
+ pmap + IQS5XX_CHKSM_LEN + IQS5XX_APP_LEN,
+ IQS5XX_CSTM_LEN);
+ if (error)
+ goto err_mutex;
+
+ /*
+ * Closing the bootloader prompts the device to assert the RDY output,
+ * so disable the interrupt line to prevent the handler from servicing
+ * a false interrupt.
+ */
+ disable_irq(client->irq);
+
+ error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_EXEC, 0);
+ if (error)
+ goto err_irq;
+
+ error = iqs5xx_dev_init(client);
+ if (!error && iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET)
+ error = -EINVAL;
+
+err_irq:
+ enable_irq(client->irq);
+
+err_mutex:
+ mutex_unlock(&iqs5xx->lock);
+
+err_kfree:
+ kfree(pmap);
+
+ return error;
+}
+
+static ssize_t fw_file_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
+ struct i2c_client *client = iqs5xx->client;
+ size_t len = count;
+ bool input_reg = !iqs5xx->input;
+ char fw_file[IQS5XX_FW_FILE_LEN + 1];
+ int error;
+
+ if (!len)
+ return -EINVAL;
+
+ if (buf[len - 1] == '\n')
+ len--;
+
+ if (len > IQS5XX_FW_FILE_LEN)
+ return -ENAMETOOLONG;
+
+ memcpy(fw_file, buf, len);
+ fw_file[len] = '\0';
+
+ error = iqs5xx_fw_file_write(client, fw_file);
+ if (error)
+ return error;
+
+ /*
+ * If the input device was not allocated already, it is guaranteed to
+ * be allocated by this point and can finally be registered.
+ */
+ if (input_reg) {
+ error = input_register_device(iqs5xx->input);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to register device: %d\n",
+ error);
+ return error;
+ }
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR_WO(fw_file);
+
+static struct attribute *iqs5xx_attrs[] = {
+ &dev_attr_fw_file.attr,
+ NULL,
+};
+
+static const struct attribute_group iqs5xx_attr_group = {
+ .attrs = iqs5xx_attrs,
+};
+
+static int __maybe_unused iqs5xx_suspend(struct device *dev)
+{
+ struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
+ struct input_dev *input = iqs5xx->input;
+ int error = 0;
+
+ if (!input)
+ return error;
+
+ mutex_lock(&input->mutex);
+
+ if (input->users)
+ error = iqs5xx_set_state(iqs5xx->client, IQS5XX_SUSPEND);
+
+ mutex_unlock(&input->mutex);
+
+ return error;
+}
+
+static int __maybe_unused iqs5xx_resume(struct device *dev)
+{
+ struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
+ struct input_dev *input = iqs5xx->input;
+ int error = 0;
+
+ if (!input)
+ return error;
+
+ mutex_lock(&input->mutex);
+
+ if (input->users)
+ error = iqs5xx_set_state(iqs5xx->client, IQS5XX_RESUME);
+
+ mutex_unlock(&input->mutex);
+
+ return error;
+}
+
+static SIMPLE_DEV_PM_OPS(iqs5xx_pm, iqs5xx_suspend, iqs5xx_resume);
+
+static int iqs5xx_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iqs5xx_private *iqs5xx;
+ int error;
+
+ iqs5xx = devm_kzalloc(&client->dev, sizeof(*iqs5xx), GFP_KERNEL);
+ if (!iqs5xx)
+ return -ENOMEM;
+
+ dev_set_drvdata(&client->dev, iqs5xx);
+
+ i2c_set_clientdata(client, iqs5xx);
+ iqs5xx->client = client;
+
+ iqs5xx->reset_gpio = devm_gpiod_get(&client->dev,
+ "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(iqs5xx->reset_gpio)) {
+ error = PTR_ERR(iqs5xx->reset_gpio);
+ dev_err(&client->dev, "Failed to request GPIO: %d\n", error);
+ return error;
+ }
+
+ mutex_init(&iqs5xx->lock);
+
+ iqs5xx_reset(client);
+ usleep_range(10000, 10100);
+
+ error = iqs5xx_dev_init(client);
+ if (error)
+ return error;
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, iqs5xx_irq, IRQF_ONESHOT, client->name, iqs5xx);
+ if (error) {
+ dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+ return error;
+ }
+
+ error = devm_device_add_group(&client->dev, &iqs5xx_attr_group);
+ if (error) {
+ dev_err(&client->dev, "Failed to add attributes: %d\n", error);
+ return error;
+ }
+
+ if (iqs5xx->input) {
+ error = input_register_device(iqs5xx->input);
+ if (error)
+ dev_err(&client->dev,
+ "Failed to register device: %d\n",
+ error);
+ }
+
+ return error;
+}
+
+static const struct i2c_device_id iqs5xx_id[] = {
+ { "iqs550", 0 },
+ { "iqs572", 1 },
+ { "iqs525", 2 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, iqs5xx_id);
+
+static const struct of_device_id iqs5xx_of_match[] = {
+ { .compatible = "azoteq,iqs550" },
+ { .compatible = "azoteq,iqs572" },
+ { .compatible = "azoteq,iqs525" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, iqs5xx_of_match);
+
+static struct i2c_driver iqs5xx_i2c_driver = {
+ .driver = {
+ .name = "iqs5xx",
+ .of_match_table = iqs5xx_of_match,
+ .pm = &iqs5xx_pm,
+ },
+ .id_table = iqs5xx_id,
+ .probe = iqs5xx_probe,
+};
+module_i2c_driver(iqs5xx_i2c_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS550/572/525 Trackpad/Touchscreen Controller");
+MODULE_LICENSE("GPL");
This patch adds support for the Azoteq IQS550/572/525 family of trackpad/touchscreen controllers. The driver has been tested with an IQS550EV02 evaluation board. A demonstration of the driver's capabilities is available here: https://youtu.be/sRNNx4XZBts Signed-off-by: Jeff LaBundy <jeff@labundy.com> --- Changes in v7: - Changed the 'val' pointer type in iqs5xx_read_burst and iqs5xx_write_burst to void * and const void *, respectively so that callers need not cast - Overhauled the device initialization process to simply enter the bootloader (for subsequent firmware updates from user space) rather than automatically updating firmware in response to version mismatches - Withheld input device allocation and registration until the device has been successfully identified (or corrected firmware pushed from user space) - Added comments in iqs5xx_fw_file_parse to explain why request_ihex_firmware is not used - Delayed the return from iqs5xx_irq until the device releases its RDY output to allow the use of level-sensitive interrupts - Removed IRQF_TRIGGER_RISING to preserve the type specified by device tree Changes in v6: - None Changes in v5: - Demoted the first instance of dev_err in iqs5xx_update_firmware to dev_info - Updated the commit message to describe the test setup and provide a link to a demonstration of the driver's capabilities Changes in v4: - Replaced 'ret' with 'error' where applicable - Made use of packed structures to parse device ID and touch data registers as well as firmware records - Overhauled iqs5xx_update_firmware to make use of existing helper functions and to be robust against erroneous firmware files - Refactored and fortified the bootloader steps in iqs5xx_update_firmware by allowing additional retries upon failure - Optimized register read/write functions and added wrappers for single-byte transactions - Updated the error handling in iqs5xx_set_state and removed the superfluous 'disabled' flag - General improvements to error messages returned via dev_err Changes in v3: - None Changes in v2: - Rebased on top of updated iqs5xx.txt - Refactored the axis configuration logic in iqs5xx_dev_init to adhere to the behavior defined in touchscreen.txt drivers/input/touchscreen/Kconfig | 10 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/iqs5xx.c | 1116 ++++++++++++++++++++++++++++++++++++ 3 files changed, 1127 insertions(+) create mode 100644 drivers/input/touchscreen/iqs5xx.c -- 2.7.4