@@ -54,6 +54,9 @@
/* MPR121 has 12 keys */
#define MPR121_MAX_KEY_COUNT 12
+#define MPR121_MIN_POLL_INTERVAL 10
+#define MPR121_MAX_POLL_INTERVAL 200
+
struct mpr121_touchkey {
struct i2c_client *client;
struct input_dev *input_dev;
@@ -115,11 +118,11 @@ static struct regulator *mpr121_vdd_supply_init(struct device *dev)
return vdd_supply;
}
-static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
+static void mpr_touchkey_report(struct input_dev *dev)
{
- struct mpr121_touchkey *mpr121 = dev_id;
- struct i2c_client *client = mpr121->client;
+ struct mpr121_touchkey *mpr121 = input_get_drvdata(dev);
struct input_dev *input = mpr121->input_dev;
+ struct i2c_client *client = mpr121->client;
unsigned long bit_changed;
unsigned int key_num;
int reg;
@@ -127,14 +130,14 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
if (reg < 0) {
dev_err(&client->dev, "i2c read error [%d]\n", reg);
- goto out;
+ return;
}
reg <<= 8;
reg |= i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_0_ADDR);
if (reg < 0) {
dev_err(&client->dev, "i2c read error [%d]\n", reg);
- goto out;
+ return;
}
reg &= TOUCH_STATUS_MASK;
@@ -155,8 +158,14 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
}
input_sync(input);
+}
+
+static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
+{
+ struct mpr121_touchkey *mpr121 = dev_id;
+
+ mpr_touchkey_report(mpr121->input_dev);
-out:
return IRQ_HANDLED;
}
@@ -229,14 +238,10 @@ static int mpr_touchkey_probe(struct i2c_client *client,
int vdd_uv;
struct mpr121_touchkey *mpr121;
struct input_dev *input_dev;
+ u32 poll_interval = 0;
int error;
int i;
- if (!client->irq) {
- dev_err(dev, "irq number should not be zero\n");
- return -EINVAL;
- }
-
vdd_supply = mpr121_vdd_supply_init(dev);
if (IS_ERR(vdd_supply))
return PTR_ERR(vdd_supply);
@@ -274,6 +279,7 @@ static int mpr_touchkey_probe(struct i2c_client *client,
if (device_property_read_bool(dev, "autorepeat"))
__set_bit(EV_REP, input_dev->evbit);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(input_dev, mpr121);
input_dev->keycode = mpr121->keycodes;
input_dev->keycodesize = sizeof(mpr121->keycodes[0]);
@@ -288,13 +294,40 @@ static int mpr_touchkey_probe(struct i2c_client *client,
return error;
}
- error = devm_request_threaded_irq(dev, client->irq, NULL,
- mpr_touchkey_interrupt,
- IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- dev->driver->name, mpr121);
- if (error) {
- dev_err(dev, "Failed to register interrupt\n");
- return error;
+ device_property_read_u32(dev, "linux,poll-interval", &poll_interval);
+
+ if (client->irq) {
+ error = devm_request_threaded_irq(dev, client->irq, NULL,
+ mpr_touchkey_interrupt,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ dev->driver->name, mpr121);
+ if (error) {
+ dev_err(dev, "Failed to register interrupt\n");
+ return error;
+ }
+ } else if (poll_interval) {
+ if (poll_interval < MPR121_MIN_POLL_INTERVAL)
+ return -EINVAL;
+
+ if (poll_interval > MPR121_MAX_POLL_INTERVAL)
+ return -EINVAL;
+
+ error = input_setup_polling(input_dev, mpr_touchkey_report);
+ if (error) {
+ dev_err(dev, "Failed to setup polling\n");
+ return error;
+ }
+
+ input_set_poll_interval(input_dev, poll_interval);
+ input_set_min_poll_interval(input_dev,
+ MPR121_MIN_POLL_INTERVAL);
+ input_set_max_poll_interval(input_dev,
+ MPR121_MAX_POLL_INTERVAL);
+ } else {
+ dev_err(dev,
+ "invalid IRQ number and polling not configured\n");
+ return -EINVAL;
}
error = input_register_device(input_dev);
In case the interrupt line is not available, polling can be used to read out the state of the keys. Period of the polling needs to be configured by the linux,poll-interval DT property. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> --- drivers/input/keyboard/mpr121_touchkey.c | 69 +++++++++++++++++++++++--------- 1 file changed, 51 insertions(+), 18 deletions(-)