@@ -4,6 +4,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@@ -330,6 +331,18 @@
vcc-supply = <&sw2_reg>;
status = "disabled";
};
+
+ touchkeys: keys@5a {
+ compatible = "fsl,mpr121-touchkey";
+ reg = <0x5a>;
+ vdd-supply = <&sw2_reg>;
+ autorepeat;
+ linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+ <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+ <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+ poll-interval = <50>;
+ status = "disabled";
+ };
};
&iomuxc {
@@ -45,6 +45,10 @@
status = "okay";
};
+&touchkeys {
+ status = "okay";
+};
+
&usdhc3 {
status = "okay";
};
Add the touch keyboard present on Hydra board. The controller is connected only using I2C lines. The interrupt line is not available hence we use the polling mode. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> --- Changes since v1: - Use poll-interval property name instead of linux,poll-interval. arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 13 +++++++++++++ arch/arm/boot/dts/imx6dl-yapp4-hydra.dts | 4 ++++ 2 files changed, 17 insertions(+)