@@ -1,9 +1,10 @@
+
// SPDX-License-Identifier: GPL-2.0-only
/*
* Penmount serial touchscreen driver
*
* Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
- * Copyright (c) 2011 John Sung <penmount.touch@gmail.com>
+ * Copyright (c) 2022 John Sung <penmount.touch@gmail.com>
*
* Based on ELO driver (drivers/input/touchscreen/elo.c)
* Copyright (c) 2004 Vojtech Pavlik
@@ -16,7 +17,11 @@
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
#include <linux/serio.h>
+#include <linux/serdev.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#define DRIVER_DESC "PenMount serial touchscreen driver"
@@ -31,9 +36,17 @@
#define PM_MAX_LENGTH 6
#define PM_MAX_MTSLOT 16
-#define PM_3000_MTSLOT 2
+#define PM_3000_MTSLOT 5
#define PM_6250_MTSLOT 12
+enum {
+ PMSERIAL_DEVICEID_9000 = 0,
+ PMSERIAL_DEVICEID_6000,
+ PMSERIAL_DEVICEID_P2,
+ PMSERIAL_DEVICEID_M1,
+ PMSERIAL_DEVICEID_6010,
+};
+
/*
* Multi-touch slot
*/
@@ -47,15 +60,24 @@ struct mt_slot {
* Per-touchscreen data.
*/
+struct pm_device_conf;
+
struct pm {
struct input_dev *dev;
struct serio *serio;
+ const struct pm_device_conf *conf;
int idx;
unsigned char data[PM_MAX_LENGTH];
char phys[32];
+ struct mt_slot slots[PM_MAX_MTSLOT];
+};
+
+struct pm_device_conf {
+ unsigned long baudrate;
+ unsigned short productid;
unsigned char packetsize;
unsigned char maxcontacts;
- struct mt_slot slots[PM_MAX_MTSLOT];
+ int max;
void (*parse_packet)(struct pm *);
};
@@ -67,7 +89,7 @@ static void pm_mtevent(struct pm *pm, struct input_dev *input)
{
int i;
- for (i = 0; i < pm->maxcontacts; ++i) {
+ for (i = 0; i < pm->conf->maxcontacts; ++i) {
input_mt_slot(input, i);
input_mt_report_slot_state(input, MT_TOOL_FINGER,
pm->slots[i].active);
@@ -100,7 +122,7 @@ static void pm_parse_9000(struct pm *pm)
{
struct input_dev *dev = pm->dev;
- if ((pm->data[0] & 0x80) && pm->packetsize == ++pm->idx) {
+ if ((pm->data[0] & 0x80) && pm->conf->packetsize == ++pm->idx) {
input_report_abs(dev, ABS_X, pm->data[1] * 128 + pm->data[2]);
input_report_abs(dev, ABS_Y, pm->data[3] * 128 + pm->data[4]);
input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));
@@ -113,7 +135,7 @@ static void pm_parse_6000(struct pm *pm)
{
struct input_dev *dev = pm->dev;
- if ((pm->data[0] & 0xbf) == 0x30 && pm->packetsize == ++pm->idx) {
+ if ((pm->data[0] & 0xbf) == 0x30 && pm->conf->packetsize == ++pm->idx) {
if (pm_checkpacket(pm->data)) {
input_report_abs(dev, ABS_X,
pm->data[2] * 256 + pm->data[1]);
@@ -130,7 +152,7 @@ static void pm_parse_3000(struct pm *pm)
{
struct input_dev *dev = pm->dev;
- if ((pm->data[0] & 0xce) == 0x40 && pm->packetsize == ++pm->idx) {
+ if ((pm->data[0] & 0xce) == 0x40 && pm->conf->packetsize == ++pm->idx) {
if (pm_checkpacket(pm->data)) {
int slotnum = pm->data[0] & 0x0f;
pm->slots[slotnum].active = pm->data[0] & 0x30;
@@ -146,7 +168,7 @@ static void pm_parse_6250(struct pm *pm)
{
struct input_dev *dev = pm->dev;
- if ((pm->data[0] & 0xb0) == 0x30 && pm->packetsize == ++pm->idx) {
+ if ((pm->data[0] & 0xb0) == 0x30 && pm->conf->packetsize == ++pm->idx) {
if (pm_checkpacket(pm->data)) {
int slotnum = pm->data[0] & 0x0f;
pm->slots[slotnum].active = pm->data[0] & 0x40;
@@ -158,6 +180,42 @@ static void pm_parse_6250(struct pm *pm)
}
}
+static const struct pm_device_conf pm_device_9000 = {
+ .baudrate = 19200,
+ .max = 0x3FF,
+ .productid = 0x9000,
+ .packetsize = 5,
+ .maxcontacts = 1,
+ .parse_packet = pm_parse_9000,
+};
+
+static const struct pm_device_conf pm_device_6000 = {
+ .baudrate = 19200,
+ .max = 0x3FF,
+ .productid = 0x6000,
+ .packetsize = 6,
+ .maxcontacts = 1,
+ .parse_packet = pm_parse_6000,
+};
+
+static const struct pm_device_conf pm_device_p2 = {
+ .baudrate = 38400,
+ .max = 0x7FF,
+ .productid = 0x3000,
+ .packetsize = 6,
+ .maxcontacts = PM_3000_MTSLOT,
+ .parse_packet = pm_parse_3000,
+};
+
+static const struct pm_device_conf pm_device_m1 = {
+ .baudrate = 19200,
+ .max = 0x3FF,
+ .productid = 0x6250,
+ .packetsize = 6,
+ .maxcontacts = PM_6250_MTSLOT,
+ .parse_packet = pm_parse_6250,
+};
+
static irqreturn_t pm_interrupt(struct serio *serio,
unsigned char data, unsigned int flags)
{
@@ -165,7 +223,7 @@ static irqreturn_t pm_interrupt(struct serio *serio,
pm->data[pm->idx] = data;
- pm->parse_packet(pm);
+ pm->conf->parse_packet(pm);
return IRQ_HANDLED;
}
@@ -191,10 +249,9 @@ static void pm_disconnect(struct serio *serio)
* new serio device that supports PenMount protocol and registers it as
* an input device.
*/
-
-static int pm_connect(struct serio *serio, struct serio_driver *drv)
+static struct pm * pm_driver_init(struct device * dev, const struct pm_device_conf * conf, char *phys)
{
- struct pm *pm;
+ struct pm *pm = NULL;
struct input_dev *input_dev;
int max_x, max_y;
int err;
@@ -205,66 +262,68 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv)
err = -ENOMEM;
goto fail1;
}
-
- pm->serio = serio;
- pm->dev = input_dev;
- snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
- pm->maxcontacts = 1;
+
+ pm->dev = input_dev;
input_dev->name = "PenMount Serial TouchScreen";
- input_dev->phys = pm->phys;
+ input_dev->phys = phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_PENMOUNT;
input_dev->id.product = 0;
input_dev->id.version = 0x0100;
- input_dev->dev.parent = &serio->dev;
+ input_dev->dev.parent = dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
- switch (serio->id.id) {
- default:
- case 0:
- pm->packetsize = 5;
- pm->parse_packet = pm_parse_9000;
- input_dev->id.product = 0x9000;
- max_x = max_y = 0x3ff;
- break;
-
- case 1:
- pm->packetsize = 6;
- pm->parse_packet = pm_parse_6000;
- input_dev->id.product = 0x6000;
- max_x = max_y = 0x3ff;
- break;
-
- case 2:
- pm->packetsize = 6;
- pm->parse_packet = pm_parse_3000;
- input_dev->id.product = 0x3000;
- max_x = max_y = 0x7ff;
- pm->maxcontacts = PM_3000_MTSLOT;
- break;
-
- case 3:
- pm->packetsize = 6;
- pm->parse_packet = pm_parse_6250;
- input_dev->id.product = 0x6250;
- max_x = max_y = 0x3ff;
- pm->maxcontacts = PM_6250_MTSLOT;
- break;
- }
+ pm->conf = conf;
+ input_dev->id.product = conf->productid;
+ max_x = max_y = conf->max;
input_set_abs_params(pm->dev, ABS_X, 0, max_x, 0, 0);
input_set_abs_params(pm->dev, ABS_Y, 0, max_y, 0, 0);
- if (pm->maxcontacts > 1) {
- input_mt_init_slots(pm->dev, pm->maxcontacts, 0);
+ if (pm->conf->maxcontacts > 1) {
+ input_mt_init_slots(pm->dev, pm->conf->maxcontacts, 0);
input_set_abs_params(pm->dev,
ABS_MT_POSITION_X, 0, max_x, 0, 0);
input_set_abs_params(pm->dev,
ABS_MT_POSITION_Y, 0, max_y, 0, 0);
}
+ return pm;
+
+ fail1:
+ if (input_dev) input_free_device(input_dev);
+ if (pm) kfree(pm);
+ return NULL;
+}
+
+static int pm_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct pm *pm = NULL;
+ int err = 0;
+ const struct pm_device_conf * device = NULL;
+
+ switch (serio->id.id) {
+ case PMSERIAL_DEVICEID_9000:
+ device = &pm_device_9000;
+ break;
+ default:
+ case PMSERIAL_DEVICEID_6000:
+ device = &pm_device_6000;
+ break;
+ case PMSERIAL_DEVICEID_P2:
+ device = &pm_device_p2;
+ break;
+ case PMSERIAL_DEVICEID_M1:
+ device = &pm_device_m1;
+ break;
+ }
+ pm = pm_driver_init(&serio->dev, device, serio->phys);
+ if (!pm) return -ENOMEM;
+
+ pm->serio = serio;
+ snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
serio_set_drvdata(serio, pm);
@@ -280,7 +339,7 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv)
fail3: serio_close(serio);
fail2: serio_set_drvdata(serio, NULL);
- fail1: input_free_device(input_dev);
+ input_free_device(pm->dev);
kfree(pm);
return err;
}
@@ -293,7 +352,7 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv)
{
.type = SERIO_RS232,
.proto = SERIO_PENMOUNT,
- .id = SERIO_ANY,
+ .id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
@@ -305,11 +364,145 @@ static int pm_connect(struct serio *serio, struct serio_driver *drv)
.driver = {
.name = "serio-penmount",
},
- .description = DRIVER_DESC,
+ .description= DRIVER_DESC,
.id_table = pm_serio_ids,
.interrupt = pm_interrupt,
.connect = pm_connect,
.disconnect = pm_disconnect,
};
-module_serio_driver(pm_drv);
+static void pm_serdev_wakeup(struct serdev_device *serdev)
+{
+ return;
+}
+
+static int pm_serdev_receive(struct serdev_device *serdev, const unsigned char *data,
+ size_t count)
+{
+ struct pm *pm = NULL;
+ size_t i = 0;
+
+ pm = serdev_device_get_drvdata(serdev);
+ if (pm == NULL) {
+ return 0;
+ }
+
+ for (i = 0; i < count; i++) {
+ pm->data[pm->idx] = data[i];
+ pm->conf->parse_packet(pm);
+ }
+
+ // Accept all data
+ return count;
+}
+
+static const
+struct serdev_device_ops pm_serdev_ops = {
+ .receive_buf = pm_serdev_receive,
+ .write_wakeup = pm_serdev_wakeup,
+};
+
+static int pm_serdev_enable(struct serdev_device *serdev)
+{
+ unsigned char cmd[6] = {0xF1, 0x00, 0x00, 0x00, 0x00, 0x0E};
+
+ return serdev_device_write(serdev, cmd, sizeof(cmd), 0);
+}
+
+static int pm_serdev_probe(struct serdev_device *serdev)
+{
+ struct pm *pm = NULL;
+ uint32_t speed = 0;
+ const struct pm_device_conf * conf = &pm_device_6000;
+ int err = 0;
+
+ conf = (struct pm_device_conf *)of_device_get_match_data(&serdev->dev);
+ pm = pm_driver_init(&serdev->dev, conf, (char *)dev_name(&serdev->dev));
+ if (!pm) {
+ return -ENOMEM;
+ }
+ touchscreen_parse_properties(pm->dev, (pm->conf->maxcontacts > 1), NULL);
+
+ serdev_device_set_drvdata(serdev, pm);
+ serdev_device_set_client_ops(serdev, &pm_serdev_ops);
+
+ err = serdev_device_open(serdev);
+ if (err) {
+ kfree(pm);
+ return err;
+ }
+
+ of_property_read_u32(serdev->dev.of_node, "baudrate", &speed);
+ if (!speed) speed = pm->conf->baudrate;
+ speed = serdev_device_set_baudrate(serdev, speed);
+ dev_info(&serdev->dev, "Using baudrate: %u\n", speed);
+
+ serdev_device_set_flow_control(serdev, false);
+ if (pm->conf->productid == 0x6000) {
+ pm_serdev_enable (serdev);
+ }
+
+ err = input_register_device(pm->dev);
+ if (err) {
+ serdev_device_close(serdev);
+ input_free_device(pm->dev);
+ kfree(pm);
+ return err;
+ }
+
+ return 0;
+}
+
+static void pm_serdev_remove(struct serdev_device *serdev)
+{
+ serdev_device_close(serdev);
+
+ return;
+}
+
+static const struct of_device_id pm_serdev_of_match[] = {
+ {
+ .compatible = "penmount,pm9000",
+ .data = &pm_device_9000,
+ },
+ {
+ .compatible = "penmount,pm6000",
+ .data = &pm_device_6000,
+ },
+ {
+ .compatible = "penmount,p2",
+ .data = &pm_device_p2,
+ },
+ {
+ .compatible = "penmount,m1",
+ .data = &pm_device_m1,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, pm_serdev_of_match);
+
+static struct serdev_device_driver pm_serdev_drv = {
+ .probe = pm_serdev_probe,
+ .remove = pm_serdev_remove,
+ .driver = {
+ .name = "serdev-penmount",
+ .of_match_table = of_match_ptr(pm_serdev_of_match),
+ },
+};
+
+static int __init pm_init ( void )
+{
+ serdev_device_driver_register ( &pm_serdev_drv );
+ return serio_register_driver ( &pm_drv ) ;
+}
+
+static void __exit pm_exit ( void )
+{
+ serdev_device_driver_unregister ( &pm_serdev_drv );
+ serio_unregister_driver ( &pm_drv ) ;
+
+ return ;
+}
+
+module_init(pm_init);
+module_exit(pm_exit);
Currently the penmount touchscreen driver registers as a serio driver, which seems not supporting device tree binding. This patch tries to support both serio and serdev in a single module. For this purpose, the module implements module_init and module_exit instead of using module_serio_driver. The module is also modified to share input codes for both serio and serdev. Signed-off-by: John Sung <penmount.touch@gmail.com> --- drivers/input/touchscreen/penmount.c | 307 ++++++++++++++++++++++++++++------- 1 file changed, 250 insertions(+), 57 deletions(-)