| Message ID | 1d280a35fc522f7b271c730988ab0f186fef25ba.1491467308.git.stwiss.opensource@diasemi.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 04/06/2017 01:28 AM, Steve Twiss wrote: > From: Steve Twiss <stwiss.opensource@diasemi.com> > > Add binding information for DA9062 and DA9061 watchdog. > > Example bindings for both DA9062 and DA9061 devices are added. For > the DA9061 device, a fallback compatible line is added as a valid > combination of compatible strings. > > The original binding for DA9062 (only) used to reside inside the > Documentation/devicetree/bindings/mfd/da9062.txt MFD document. > The da9062-watchdog section was deleted in that file and replaced > with a link to the new DA9061/62 binding information stored in this > patch. > > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > > --- > > Hi, > > I have just noticed. > > The driver code changes for the da9062/61 watchdog have been applied to > the linux kernel. The da9062/61 alterations for > drivers/watchdog/da9062_wdt.c appear in linux-stable/v4.10-rc1. Those > changes are linked to this binding patch, but this patch seems to have > been missed out. > > The source code dependency for this patch is given in the commit: > 72106c1 v4.10-rc1 watchdog: da9062/61: watchdog driver > > I don't see anything blocking for merge of this patch now. > > Regards, > Steve > > This patch applies against linux-next and v4.11-rc3 > > v6 -> v7 > - NO CODE CHANGE > > v5 -> v6 > - NO CODE CHANGE > - Rebased from v4.9 to v4.11-rc3 > > v4 -> v5 > - NO CODE CHANGE > - Rebased from v4.8 to v4.9 > > v3 -> v4 > - NO CODE CHANGE > - Patch renamed from [PATCH V3 2/9] to [PATCH V4 1/8] > - Added Acked-by Rob Herring > > v2 -> v3 > - Patch renamed from [PATCH V1 02/10] to [PATCH V3 2/9] > - Each compatible line should be a valid combination of compatible > strings, alter DA9061 line to include the fall back compatible string > - Update the commit message to describe this change > - Add information about associated patches from this set without > describing them as being explicitly dependent on this binding > > v1 -> v2 > - Patch renamed from [PATCH V1 07/10] to [PATCH V2 02/10] -- these > changes were made to fix checkpatch warnings caused by the patch > set dependency order > - Updated the patch description to be explicit about where parts of > this binding had originally been stored > - A second example for DA9061 is provided to highlight the use of a > fall-back compatible option for the DA9062 watchdog driver > > As previously: > > For the watchdog case: the DA9062 device driver is compatible with the > DA9061 and for this reason there is minimal change required to the DA9062 > watchdog device driver. The example for the DA9061 watchdog shows the > use of a fall-back compatible string. > > Other information: > The device driver from this patch set (associated with this binding) is > [PATCH V5 6/8] watchdog: da9061: watchdog driver > > Regards, > Steve Twiss, Dialog Semiconductor > > > .../devicetree/bindings/watchdog/da9062-wdt.txt | 23 ++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > create mode 100644 Documentation/devicetree/bindings/watchdog/da9062-wdt.txt > > diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt > new file mode 100644 > index 0000000..b935b52 > --- /dev/null > +++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt > @@ -0,0 +1,23 @@ > +* Dialog Semiconductor DA9062/61 Watchdog Timer > + > +Required properties: > + > +- compatible: should be one of the following valid compatible string lines: > + "dlg,da9061-watchdog", "dlg,da9062-watchdog" > + "dlg,da9062-watchdog" > + > +Example: DA9062 > + > + pmic0: da9062@58 { > + watchdog { > + compatible = "dlg,da9062-watchdog"; > + }; > + }; > + > +Example: DA9061 using a fall-back compatible for the DA9062 watchdog driver > + > + pmic0: da9061@58 { > + watchdog { > + compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog"; > + }; > + }; > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt new file mode 100644 index 0000000..b935b52 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt @@ -0,0 +1,23 @@ +* Dialog Semiconductor DA9062/61 Watchdog Timer + +Required properties: + +- compatible: should be one of the following valid compatible string lines: + "dlg,da9061-watchdog", "dlg,da9062-watchdog" + "dlg,da9062-watchdog" + +Example: DA9062 + + pmic0: da9062@58 { + watchdog { + compatible = "dlg,da9062-watchdog"; + }; + }; + +Example: DA9061 using a fall-back compatible for the DA9062 watchdog driver + + pmic0: da9061@58 { + watchdog { + compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog"; + }; + };