From patchwork Wed Feb 9 09:59:22 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Alan Cox X-Patchwork-Id: 543491 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p19AOwv8027302 for ; Wed, 9 Feb 2011 10:28:05 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753392Ab1BIK2E (ORCPT ); Wed, 9 Feb 2011 05:28:04 -0500 Received: from lxorguk.ukuu.org.uk ([81.2.110.251]:40121 "EHLO lxorguk.ukuu.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753274Ab1BIK2C (ORCPT ); Wed, 9 Feb 2011 05:28:02 -0500 Received: from bob.linux.org.uk (earthlight.etchedpixels.co.uk [81.2.110.250]) by lxorguk.ukuu.org.uk (8.14.4/8.14.1) with ESMTP id p19AR57p010436 for ; Wed, 9 Feb 2011 10:27:10 GMT From: Alan Cox Subject: [PATCH] bma023: Support for Bosch BMA023 and SMB380 accelerometers To: linux-input@vger.kernel.org Date: Wed, 09 Feb 2011 09:59:22 +0000 Message-ID: <20110209095712.32575.70429.stgit@bob.linux.org.uk> User-Agent: StGIT/0.14.3 MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Wed, 09 Feb 2011 10:28:05 +0000 (UTC) diff --git a/Documentation/ABI/testing/sysfs-i2c-bma023 b/Documentation/ABI/testing/sysfs-i2c-bma023 new file mode 100644 index 0000000..04a293c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-i2c-bma023 @@ -0,0 +1,93 @@ +*Note*: It is anticpated that if IIO ever makes it upstream that the +preferred general purpose non-input interface to this hardware will become IIO. + +What: /sys/bus/i2c/devices/-/range +Date: February 2011 +Contact: Alan Cox +Description: Configure the sensing range of the device + 0: +/- 2G + 1: +/- 4G + 2: +/- 8G + +What: /sys/bus/i2c/devices/-/bandwidth +Date: February 2011 +Contact: Alan Cox +Description: Digital filtering on ADC output data + 0: 25Hz + 1: 50Hz + 2: 100Hz + 3: 190Hz + 4: 375Hz + 5: 750Hz + 6: 1500Hz + +What: /sys/bus/i2c/devices/-/new_data_int +Date: February 2011 +Contact: Alan Cox +Description: Generate an interrupt when the axes values are changed + 0: disable + 1: enable + +What: /sys/bus/i2c/devices/-/hg_int +Date: February 2011 +Contact: Alan Cox +Description: Generate an interrupt when the high-g threshold is met + 0: disable + 1: enable + +What: /sys/bus/i2c/devices/-/lg_int +Date: February 2011 +Contact: Alan Cox +Description: Generate an interrupt when the low-g threshold is met + 0: disable + 1: enable + +What: /sys/bus/i2c/devices/-/hg_dur +Date: February 2011 +Contact: Alan Cox +Description: High G duration required to trigger. + (See the equations in the data sheet) + +What: /sys/bus/i2c/devices/-/hg_hyst +Date: February 2011 +Contact: Alan Cox +Description: High G duration hysteresis + (See the equations in the data sheet) + +What: /sys/bus/i2c/devices/-/hg_thres +Date: February 2011 +Contact: Alan Cox +Description: High G threshold + (See the equations in the data sheet) + +What: /sys/bus/i2c/devices/-/lg_dur +Date: February 2011 +Contact: Alan Cox +Description: Low G duration required to trigger + (See the equations in the data sheet) + +What: /sys/bus/i2c/devices/-/lg_hyst +Date: February 2011 +Contact: Alan Cox +Description: Low G duration hysteresis + (See the equations in the data sheet) + +What: /sys/bus/i2c/devices/-/lg_thres +Date: February 2011 +Contact: Alan Cox +Description: Low G threshold + (See the equations in the data sheet) + +What: /sys/bus/i2c/devices/-/power_mode +Date: February 2011 +Contact: Alan Cox +Description: Power mode + 0: Use runtime PM + 1: Forced on + +What: /sys/bus/i2c/devices/-/accel_data +Date: February 2011 +Contact: Alan Cox +Description: Raw XYZ co-ordinate data, each ranges from -512 to +511, + formatted as (x,y,z) to match existing similar interfaces + diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index b0c6772..3b595b8 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -454,4 +454,14 @@ config INPUT_CMA3000_I2C To compile this driver as a module, choose M here: the module will be called cma3000_d0x_i2c. +config INPUT_BMA023 + tristate "BMA023/SMB380 Triaxial acceleration sensor" + depends on I2C + help + Say Y here if you want to support Bosch BMA023/SMB380 + connected via an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called bma023. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 9b47971..79b3f66 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o +obj-$(CONFIG_INPUT_BMA023) += bma023.o obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o diff --git a/drivers/input/misc/bma023.c b/drivers/input/misc/bma023.c new file mode 100644 index 0000000..d7abccd --- /dev/null +++ b/drivers/input/misc/bma023.c @@ -0,0 +1,1308 @@ +/* + * bma023.c - BMA023 Tri-axis accelerometer driver + * + * Copyright (C) 2010 Samsung Eletronics Co.Ltd + * Kim Kyuwon + * Kyungmin Park + * Donggeun Kim + * + * Copyright (C) 2011 Wistron Co.Ltd + * Joseph Lai + * + * Copyright (c) 2011 Intel Corporation + * Alan Cox + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO (After) + * Investigate if the IRQ disable is really needed (needs that data + * sheet reviewing in more detail) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BMA023_DEFAULT_AUTO_DELAY 250 /* mS */ + +#define BMA023_CHIP_ID_REG 0x00 +#define BMA023_X_LSB_REG 0x02 +#define BMA023_X_MSB_REG 0x03 +#define BMA023_Y_LSB_REG 0x04 +#define BMA023_Y_MSB_REG 0x05 +#define BMA023_Z_LSB_REG 0x06 +#define BMA023_Z_MSB_REG 0x07 +#define BMA023_TEMP_REG 0x08 /* An output of 0 equals -30C, + 1 LSB equals 0.5C */ +#define BMA023_CTRL1_REG 0x0a +#define BMA023_CTRL2_REG 0x0b +#define BMA023_SETTINGS1_REG 0x0c +#define BMA023_SETTINGS2_REG 0x0d +#define BMA023_SETTINGS3_REG 0x0e +#define BMA023_SETTINGS4_REG 0x0f +#define BMA023_SETTINGS5_REG 0x10 +#define BMA023_SETTINGS6_REG 0x11 +#define BMA023_RANGE_BW_REG 0x14 +#define BMA023_CONF2_REG 0x15 + +#define BMA023_CHIP_ID 0x02 + +#define BMA023_NEW_DATA_INT_SHIFT 5 +#define BMA023_NEW_DATA_INT_MASK (0x1 << 5) + +#define BMA023_RANGE_SHIFT 3 +#define BMA023_RANGE_MASK (0x3 << 3) +#define BMA023_BANDWIDTH_SHIFT 0 +#define BMA023_BANDWIDTH_MASK (0x7) + +#define BMA023_HG_HYST_SHIFT 3 +#define BMA023_HG_HYST_MASK (0x7 << 3) +#define BMA023_LG_HYST_SHIFT 0 +#define BMA023_LG_HYST_MASK (0x7) + +#define BMA023_HG_DUR_SHIFT (0x0) +#define BMA023_HG_DUR_MASK (0xff) +#define BMA023_HG_THRES_SHIFT (0x0) +#define BMA023_HG_THRES_MASK (0xff) +#define BMA023_LG_DUR_SHIFT (0x0) +#define BMA023_LG_DUR_MASK (0xff) +#define BMA023_LG_THRES_SHIFT (0x0) +#define BMA023_LG_THRES_MASK (0xff) + +#define BMA023_ENABLE_HG_SHIFT 1 +#define BMA023_ENABLE_HG_MASK (0x1 << 1) +#define BMA023_ENABLE_LG_SHIFT 0 +#define BMA023_ENABLE_LG_MASK (0x1) + +#define BMA023_SLEEP_SHIFT 0 +#define BMA023_SLEEP_MASK (0x1) + +#define BMA023_ACCEL_BITS 10 +#define BMA023_MAX_VALUE ((1 << ((BMA023_ACCEL_BITS) - 1)) - 1) +#define BMA023_MIN_VALUE (-(1 << ((BMA023_ACCEL_BITS) - 1))) + +#define BMA023_DEFAULT_RANGE BMA023_RANGE_2G +#define BMA023_DEFAULT_BANDWIDTH BMA023_BW_190HZ +#define BMA023_DEFAULT_NEW_DATA_INT 0 +#define BMA023_DEFAULT_HG_INT 0 +#define BMA023_DEFAULT_LG_INT 0 +#define BMA023_DEFAULT_HG_DURATION 0x05 +#define BMA023_DEFAULT_HG_THRESHOLD 0xa0 +#define BMA023_DEFAULT_HG_HYST 0 +#define BMA023_DEFAULT_LG_DURATION 0x05 +#define BMA023_DEFAULT_LG_THRESHOLD 0x14 +#define BMA023_DEFAULT_LG_HYST 0 + +#define BMA023_SUSPEND 0 +#define BMA023_RESUME 1 + +#define BMA023_CUSTOMER_REG 0x12 +#define BMA023_INSPECT_VAL 0xBB +#define BMA023_CHECK_SHIFT 0 +#define BMA023_CHECK_MASK 0xff + +struct bma023_data { + s16 x; + s16 y; + s16 z; +}; + +struct bma023_sensor { + struct i2c_client *client; + struct device *dev; + struct input_dev *idev; + struct mutex lock; + struct bma023_data data; + int soft_power; /* Our sysfs requested power status as + opposed to the actual one which is + a combination of this and pm runtime */ + u8 range; + u8 bandwidth; + u8 new_data_int; + u8 hg_int; + u8 lg_int; + u8 lg_dur; + u8 lg_thres; + u8 lg_hyst; + u8 hg_dur; + u8 hg_thres; + u8 hg_hyst; + u8 power_mode; +}; + +/** + * bma023_write_reg - write a BMA023 register via I2C + * @reg: register being updated + * @val: value to write + * + * Updates the register or returns an error if the write fails. + */ +static int bma023_write_reg(struct i2c_client *client, u8 reg, u8 val) +{ + int ret; + /* + * According to the datasheet, the interrupt should be deactivated + * on the host side when write sequences operate. + */ + disable_irq_nosync(client->irq); + ret = i2c_smbus_write_byte_data(client, reg, val); + enable_irq(client->irq); + if (ret < 0) + dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", + __func__, reg, val, ret); + return ret; +} + +/** + * bma023_read_reg - read a BMA023 register via I2C + * @reg: register being updated + * @val: value to write + * + * Reads the register or returns a negative error code on failure. + */ +static int bma023_read_reg(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) + dev_err(&client->dev, "%s: reg 0x%x, err %d\n", + __func__, reg, ret); + return ret; +} + +/** + * bma023_xyz_read_reg - read the axes values + * @reg: register being updated + * @val: value to write + * + * Reads the register values in one transaction or returns a negative + * error code on failure/ + */ +static int bma023_xyz_read_reg(struct i2c_client *client, + u8 *buffer, int length) +{ + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = buffer, + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = length, + .buf = buffer, + }, + }; + return i2c_transfer(client->adapter, msg, 2); +} + +/** + * bma023_set_reg_bits - update a subset of register bits + * @client: i2c client for the sensor + * @val: value to write + * @shift: bit offset of field + * @mask: bit mask of field to update + * @reg: register number + * + * Update one of the many bitfield registers on the BMA023 by reading + * and writing back bits. The caller *MUST* hold the sensor lock when + * using this function in order to prevent overlapping updates corrupting + * the register. + * + * Returns success or an error code + */ +static int bma023_set_reg_bits(struct i2c_client *client, + int val, int shift, u8 mask, u8 reg) +{ + int data = bma023_read_reg(client, reg); + + if (data < 0) + return data; + + data = (data & ~mask) | ((val << shift) & mask); + return bma023_write_reg(client, reg, data); +} + +/** + * bma023_get_reg_bits - read register bitfield + * @client: i2c client for the sensor + * @shift: bit offset of field + * @mask: bit mask of field to update + * @reg: register number + * + * Read a bit field from the sensor and return the value of the field. The + * lock is not needed in this case + */ +static int bma023_get_reg_bits(struct i2c_client *client, int shift, + u8 mask, u8 reg) +{ + int data = bma023_read_reg(client, reg); + if (data < 0) + return data; + data = (data & mask) >> shift; + return data; +} + +/* + * Functions for handling all the configurable fields + */ + +/** + * bma023_set_check_reg - set an inspective value + * @client: i2c client for the sensor + * @check: update the inspective value + * + * Set an inspective value to customer's register, which can record + * any value from user. The inspective value will keep until the chip + * off or shutdown. User can recognize the chip needs re-initialize + * or not by this register. + */ +static int bma023_set_check_reg(struct i2c_client *client, u8 check) +{ + return bma023_set_reg_bits(client, check, BMA023_CHECK_SHIFT, + BMA023_CHECK_MASK, BMA023_CUSTOMER_REG); +} + +static int bma023_get_check_reg(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_CHECK_SHIFT, + BMA023_CHECK_MASK, BMA023_CUSTOMER_REG); +} + +/** + * bma023_set_range - set the full scale acceleration range + * @client: i2c client for the sensor + * @range: new range setting + * + * The range of bma023 will affect the chip to change the sensitivity + * of gravitation. The value of range includes +/- 2g, 4g and 8g. + * + * The change of range will respond to 3 axes directly. + */ +static int bma023_set_range(struct i2c_client *client, u8 range) +{ + return bma023_set_reg_bits(client, range, BMA023_RANGE_SHIFT, + BMA023_RANGE_MASK, BMA023_RANGE_BW_REG); +} + +static int bma023_get_range(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_RANGE_SHIFT, + BMA023_RANGE_MASK, BMA023_RANGE_BW_REG); +} + +/** + * bma023_set_bandwidth - set the digital filtering of ADC output data + * @client: i2c client for the sensor + * @bw: new bandwidth setting + * + * The bandwidth affect the ability of noise filter. The value of bandwidth + * includes 25Hz, 50Hz, 100Hz, 190Hz, 375Hz, 750Hz and 1500Hz. + * + * The change of bandwidth will respond to 3 axes directly. + */ +static int bma023_set_bandwidth(struct i2c_client *client, u8 bw) +{ + return bma023_set_reg_bits(client, bw, BMA023_BANDWIDTH_SHIFT, + BMA023_BANDWIDTH_MASK, BMA023_RANGE_BW_REG); +} + +static int bma023_get_bandwidth(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_BANDWIDTH_SHIFT, + BMA023_BANDWIDTH_MASK, BMA023_RANGE_BW_REG); +} + +/** + * bma023_set_new_data_int - switch on/off of new data interrupt + * @client: i2c client for the sensor + * @val: value to switch on/off, 1: on, 0: off + * + * To turn on this interrupt will generate an interrupt when all three + * axes acceleration values are new. + */ +static int bma023_set_new_data_int(struct i2c_client *client, u8 val) +{ + return bma023_set_reg_bits(client, val, BMA023_NEW_DATA_INT_SHIFT, + BMA023_NEW_DATA_INT_MASK, BMA023_CONF2_REG); +} + +static int bma023_get_new_data_int(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_NEW_DATA_INT_SHIFT, + BMA023_NEW_DATA_INT_MASK, BMA023_CONF2_REG); +} + +/** + * bma023_set_hg_int - switch on/off of high-g interrupt + * @client: i2c client for the sensor + * @val: value to switch on/off, 1: on, 0: off + * + * To turn on this interrupt will generate an interrupt when the + * oscillatory criteria is satisfied by hg_dur and hg_thres. + * + * Usually, it is used to debounce the high-g criteria. + */ +static int bma023_set_hg_int(struct i2c_client *client, u8 val) +{ + return bma023_set_reg_bits(client, val, BMA023_ENABLE_HG_SHIFT, + BMA023_ENABLE_HG_MASK, BMA023_CTRL2_REG); +} + +static int bma023_get_hg_int(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_ENABLE_HG_SHIFT, + BMA023_ENABLE_HG_MASK, BMA023_CTRL2_REG); +} + +/** + * bma023_set_lg_int - switch on/off of low-g interrupt + * @client: i2c client for the sensor + * @val: value to switch on/off, 1: on, 0: off + * + * To turn on this setting will generate an interrupt when the + * oscillatory criteria is satisfied by lg_dur and lg_thres. + * + * Usually, it is used to detect a free fall. + */ +static int bma023_set_lg_int(struct i2c_client *client, u8 val) +{ + return bma023_set_reg_bits(client, val, BMA023_ENABLE_LG_SHIFT, + BMA023_ENABLE_LG_MASK, BMA023_CTRL2_REG); +} + +static int bma023_get_lg_int(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_ENABLE_LG_SHIFT, + BMA023_ENABLE_LG_MASK, BMA023_CTRL2_REG); +} + +/** + * bma023_set_lg_dur - set low-g duration + * @client: i2c client for the sensor + * @dur: duration value, 0-255 + * + * Generate an interrupt when the gravitation is detected in low-g + * criterion for long enough duration. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_lg_dur(struct i2c_client *client, u8 dur) +{ + return bma023_set_reg_bits(client, dur, BMA023_LG_DUR_SHIFT, + BMA023_LG_DUR_MASK, BMA023_SETTINGS2_REG); +} + +static int bma023_get_lg_dur(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_LG_DUR_SHIFT, + BMA023_LG_DUR_MASK, BMA023_SETTINGS2_REG); +} + +/** + * bma023_set_lg_thres - set low-g threshold + * @client: i2c client for the sensor + * @thres: threshold value, 0-255 + * + * Filter 3 axes detection and limit to trigger an interrupt signal + * when the gravitation is detected in low-g threshold. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_lg_thres(struct i2c_client *client, u8 thres) +{ + return bma023_set_reg_bits(client, thres, BMA023_LG_THRES_SHIFT, + BMA023_LG_THRES_MASK, BMA023_SETTINGS1_REG); +} + +static int bma023_get_lg_thres(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_LG_THRES_SHIFT, + BMA023_LG_THRES_MASK, BMA023_SETTINGS1_REG); +} + +/** + * bma023_set_lg_hyst - set low-g hysteresis + * @client: i2c client for the sensor + * @hyst: hysteresis value, 0-7 + * + * Expand the range of detectable gravitation to reset an interrupt. + * An interrupt will be latched until outside of low-g criterion with + * hysteresis. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_lg_hyst(struct i2c_client *client, u8 hyst) +{ + return bma023_set_reg_bits(client, hyst, BMA023_LG_HYST_SHIFT, + BMA023_LG_HYST_MASK, BMA023_SETTINGS6_REG); +} + +static int bma023_get_lg_hyst(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_LG_HYST_SHIFT, + BMA023_LG_HYST_MASK, BMA023_SETTINGS6_REG); +} + +/** + * bma023_set_hg_dur - set high-g duration + * @client: i2c client for the sensor + * @dur: duration value, 0-255 + * + * Generate an interrupt when the gravitation is detected in high-g + * criterion for long enough duration. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_hg_dur(struct i2c_client *client, u8 dur) +{ + return bma023_set_reg_bits(client, dur, BMA023_HG_DUR_SHIFT, + BMA023_HG_DUR_MASK, BMA023_SETTINGS4_REG); +} + +static int bma023_get_hg_dur(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_HG_DUR_SHIFT, + BMA023_HG_DUR_MASK, BMA023_SETTINGS4_REG); +} + +/** + * bma023_set_hg_thres - set high-g threshold + * @client: i2c client for the sensor + * @thres: threshold value, 0-255 + * + * Filter 3 axes detection and limit to trigger an interrupt signal + * when the gravitation is detected in high-g threshold. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_hg_thres(struct i2c_client *client, u8 thres) +{ + return bma023_set_reg_bits(client, thres, BMA023_HG_THRES_SHIFT, + BMA023_HG_THRES_MASK, BMA023_SETTINGS3_REG); +} + +static int bma023_get_hg_thres(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_HG_THRES_SHIFT, + BMA023_HG_THRES_MASK, BMA023_SETTINGS3_REG); +} + +/** + * bma023_set_hg_hyst - set low-g hysteresis + * @client: i2c client for the sensor + * @hyst: hysteresis value, 0-7 + * + * Expand the range of detectable gravitation to reset an interrupt. + * An interrupt will be latched until outside of high-g criterion with + * hysteresis. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_hg_hyst(struct i2c_client *client, u8 hyst) +{ + return bma023_set_reg_bits(client, hyst, BMA023_HG_HYST_SHIFT, + BMA023_HG_HYST_MASK, BMA023_SETTINGS6_REG); +} + +static int bma023_get_hg_hyst(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_HG_HYST_SHIFT, + BMA023_HG_HYST_MASK, BMA023_SETTINGS6_REG); +} + +/** + * bma023_power_mode - set the power mode + * @client: i2c client for the sensor + * @val: value to switch on/off of power, 1: normal power, 0: low power + * + * Put device to normal-power mode or low-power mode. + */ +static int bma023_set_power_mode(struct i2c_client *client, u8 val) +{ + return bma023_set_reg_bits(client, ~val, BMA023_SLEEP_SHIFT, + BMA023_SLEEP_MASK, BMA023_CTRL1_REG); +} + +static int bma023_get_power_mode(struct i2c_client *client) +{ + return !bma023_get_reg_bits(client, BMA023_SLEEP_SHIFT, + BMA023_SLEEP_MASK, BMA023_CTRL1_REG); +} + +/** + * bma023_correct_accel_sign - convert to expected format + * @val: twos complement value + * + * The description of the digital signals x, y and z is "2' complement". + * So we need to correct the sign of data read by i2c. + */ +static s16 bma023_correct_accel_sign(s16 val) +{ + val <<= (sizeof(s16) * BITS_PER_BYTE - BMA023_ACCEL_BITS); + val >>= (sizeof(s16) * BITS_PER_BYTE - BMA023_ACCEL_BITS); + return val; +} + +/** + * bma023_merge_register_values - turn into co-ordinate + * @lsb: low bits from sensor + * @msb: high bits from sensor + * + * Turns a sensor register reading into a Linux input layer + * value and returns it. + */ +static s16 bma023_merge_register_values(u8 lsb, u8 msb) +{ + s16 val = (msb << 2) | (lsb >> 6); + return bma023_correct_accel_sign(val); +} + +/** + * bma023_read_xyz - get co-ordinates from device + * @client: i2c address of sensor + * @coords: co-ordinates to update + * + * Return the converted X Y and Z co-ordinates from the sensor device + */ +static void bma023_read_xyz(struct i2c_client *client, + struct bma023_data *coords) +{ + u8 buffer[6]; + buffer[0] = BMA023_X_LSB_REG; + bma023_xyz_read_reg(client, buffer, 6); + coords->x = bma023_merge_register_values(buffer[0], buffer[1]); + coords->y = bma023_merge_register_values(buffer[2], buffer[3]); + coords->z = bma023_merge_register_values(buffer[4], buffer[5]); + dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__, + coords->x, coords->y, coords->z); +} + +/** + * bma023_show_xyz - show co-ordinate readings + * @dev: device of sensor + * @attr: device attributes of sysfs node + * @buf: buffer for output + * + * Perform a one off read of the sensor data. In non-interrupt mode + * the sensor can be used for one off reads of the axes rather than + * as an input device. + */ +static ssize_t bma023_show_xyz(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + + mutex_lock(&sensor->lock); + bma023_read_xyz(sensor->client, &sensor->data); + mutex_unlock(&sensor->lock); + + pm_runtime_put(dev); + + return sprintf(buf, "(%d,%d,%d)\n", + sensor->data.x, sensor->data.y, sensor->data.z); +} +static DEVICE_ATTR(accel_data, S_IRUGO, bma023_show_xyz, NULL); + +/** + * bma023_set_attr - set an attribute on the sensor + * @sensor sensor to update + * @buf: buffer to parse + * @count: length of buffer written + * @get: read function to use + * @set: write function to use + * @data: where to store cached result + * + * Helper function for setting attributes of the sensor. This does + * all the parsing and locking in one place calling out to the helper + * functions provided. + */ +static ssize_t bma023_set_attr(struct bma023_sensor *sensor, + const char *buf, size_t count, + int (*get)(struct i2c_client *), + int (*set)(struct i2c_client *, u8 val), + u8 *data) +{ + unsigned long val; + int ret; + + if (!count) + return count; + + ret = strict_strtoul(buf, 10, &val); + if (!ret) { + /* We don't need the device to be fully powered up for this + but we do need to be sure that we force the i²c controller + to be awake */ + pm_runtime_get_sync(sensor->dev); + mutex_lock(&sensor->lock); + ret = set(sensor->client, val); + if (ret >= 0) { + ret = get(sensor->client); + if (ret >= 0) + *data = ret; + } + mutex_unlock(&sensor->lock); + pm_runtime_put(sensor->dev); + if (ret >= 0) + return count; + } + return ret; +} + +/* Methods for the sysfs attributes */ +static ssize_t bma023_show_power_mode(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", bma023_get_power_mode(sensor->client)); +} + +static ssize_t bma023_store_power_mode(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + unsigned long val; + int ret = strict_strtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&sensor->lock); + if (val & !sensor->soft_power) + pm_runtime_get(dev); + else if (!val && sensor->soft_power) + pm_runtime_put(dev); + sensor->soft_power = val; + mutex_unlock(&sensor->lock); + + return count; +} + +static DEVICE_ATTR(power_mode, S_IRUGO | S_IWUSR, + bma023_show_power_mode, bma023_store_power_mode); + +static ssize_t bma023_show_range(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->range); +} + +static ssize_t bma023_store_range(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_range, + bma023_set_range, + &sensor->range); +} + +static DEVICE_ATTR(range, S_IRUGO | S_IWUSR, + bma023_show_range, bma023_store_range); + +static ssize_t bma023_show_bandwidth(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->bandwidth); +} + +static ssize_t bma023_store_bandwidth(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_bandwidth, + bma023_set_bandwidth, + &sensor->bandwidth); +} + +static DEVICE_ATTR(bandwidth, S_IRUGO | S_IWUSR, + bma023_show_bandwidth, bma023_store_bandwidth); + +static ssize_t bma023_show_new_data_int(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->new_data_int); +} + +static ssize_t bma023_store_new_data_int(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_new_data_int, + bma023_set_new_data_int, + &sensor->new_data_int); +} + +static DEVICE_ATTR(new_data_int, S_IRUGO | S_IWUSR, + bma023_show_new_data_int, bma023_store_new_data_int); + +static ssize_t bma023_show_hg_int(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->hg_int); +} + +static ssize_t bma023_store_hg_int(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_hg_int, + bma023_set_hg_int, + &sensor->hg_int); +} + +static DEVICE_ATTR(hg_int, S_IRUGO | S_IWUSR, + bma023_show_hg_int, bma023_store_hg_int); + +static ssize_t bma023_show_lg_int(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->lg_int); +} + +static ssize_t bma023_store_lg_int(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_lg_int, + bma023_set_lg_int, + &sensor->lg_int); +} + +static DEVICE_ATTR(lg_int, S_IRUGO | S_IWUSR, + bma023_show_lg_int, bma023_store_lg_int); + +static ssize_t bma023_show_lg_dur(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->lg_dur); +} + +static ssize_t bma023_store_lg_dur(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_lg_dur, + bma023_set_lg_dur, + &sensor->lg_dur); +} + +static DEVICE_ATTR(lg_dur, S_IRUGO | S_IWUSR, + bma023_show_lg_dur, bma023_store_lg_dur); + +static ssize_t bma023_show_lg_thres(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->lg_thres); +} + +static ssize_t bma023_store_lg_thres(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_lg_thres, + bma023_set_lg_thres, + &sensor->lg_thres); +} + +static DEVICE_ATTR(lg_thres, S_IRUGO | S_IWUSR, + bma023_show_lg_thres, bma023_store_lg_thres); + +static ssize_t bma023_show_lg_hyst(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->lg_hyst); +} + +static ssize_t bma023_store_lg_hyst(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_lg_hyst, + bma023_set_lg_hyst, + &sensor->lg_hyst); +} + +static DEVICE_ATTR(lg_hyst, S_IRUGO | S_IWUSR, + bma023_show_lg_hyst, bma023_store_lg_hyst); + +static ssize_t bma023_show_hg_dur(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->hg_dur); +} + +static ssize_t bma023_store_hg_dur(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_hg_dur, + bma023_set_hg_dur, + &sensor->hg_dur); +} + +static DEVICE_ATTR(hg_dur, S_IRUGO | S_IWUSR, + bma023_show_hg_dur, bma023_store_hg_dur); + +static ssize_t bma023_show_hg_thres(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->hg_thres); +} + +static ssize_t bma023_store_hg_thres(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_hg_thres, + bma023_set_hg_thres, + &sensor->hg_thres); +} + +static DEVICE_ATTR(hg_thres, S_IRUGO | S_IWUSR, + bma023_show_hg_thres, bma023_store_hg_thres); + +static ssize_t bma023_show_hg_hyst(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->hg_hyst); +} + +static ssize_t bma023_store_hg_hyst(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_hg_hyst, + bma023_set_hg_hyst, + &sensor->hg_hyst); +} + +static DEVICE_ATTR(hg_hyst, S_IRUGO | S_IWUSR, + bma023_show_hg_hyst, bma023_store_hg_hyst); + +static struct attribute *bma023_attributes[] = { + &dev_attr_accel_data.attr, + &dev_attr_power_mode.attr, + &dev_attr_range.attr, + &dev_attr_bandwidth.attr, + &dev_attr_new_data_int.attr, + &dev_attr_hg_int.attr, + &dev_attr_lg_int.attr, + &dev_attr_lg_dur.attr, + &dev_attr_lg_thres.attr, + &dev_attr_lg_hyst.attr, + &dev_attr_hg_dur.attr, + &dev_attr_hg_thres.attr, + &dev_attr_hg_hyst.attr, + NULL +}; + +static const struct attribute_group bma023_group = { + .attrs = bma023_attributes, +}; + +/** + * bma023_interrupt_thread - handle an IRQ + * @irq: interrupt numner + * @data: the sensor + * + * Called by the kernel single threaded after an interrupt occurs. Read + * the sensor data and generate an input event for it. + */ +static irqreturn_t bma023_interrupt_thread(int irq, void *data) +{ + struct bma023_sensor *sensor = data; + + mutex_lock(&sensor->lock); + bma023_read_xyz(sensor->client, &sensor->data); + mutex_unlock(&sensor->lock); + + input_report_abs(sensor->idev, ABS_X, sensor->data.x); + input_report_abs(sensor->idev, ABS_Y, sensor->data.y); + input_report_abs(sensor->idev, ABS_Z, sensor->data.z); + input_sync(sensor->idev); + + return IRQ_HANDLED; +} + +/** + * bma023_initialize - set sensor parameters + * @sensor: sensor to configure + * + * Load the actual hardware with the sensor values that were provided + */ +static void bma023_initialize(struct bma023_sensor *sensor) +{ + bma023_set_range(sensor->client, sensor->range); + bma023_set_bandwidth(sensor->client, sensor->bandwidth); + bma023_set_new_data_int(sensor->client, sensor->new_data_int); + bma023_set_hg_dur(sensor->client, sensor->hg_dur); + bma023_set_hg_thres(sensor->client, sensor->hg_thres); + bma023_set_hg_hyst(sensor->client, sensor->hg_hyst); + bma023_set_lg_dur(sensor->client, sensor->lg_dur); + bma023_set_lg_thres(sensor->client, sensor->lg_thres); + bma023_set_lg_hyst(sensor->client, sensor->lg_hyst); + bma023_set_hg_int(sensor->client, sensor->hg_int); + bma023_set_lg_int(sensor->client, sensor->lg_int); + bma023_set_power_mode(sensor->client, sensor->power_mode); + bma023_set_check_reg(sensor->client, BMA023_INSPECT_VAL); +} + +/** + * bma023_input_open - called on input event open + * @input: input dev of opened device + * + * The input layer calls this function when input event is opened. The + * function will push the device to resume. Then, the device is ready + * to provide data. + */ +static int bma023_input_open(struct input_dev *input) +{ + struct bma023_sensor *sensor = input_get_drvdata(input); + pm_runtime_get(sensor->dev); + return 0; +} + +/** + * bma023_input_close - called on input event close + * @input: input dev of closed device + * + * The input layer calls this function when input event is closed. The + * function will push the device to suspend. + */ +static void bma023_input_close(struct input_dev *input) +{ + struct bma023_sensor *sensor = input_get_drvdata(input); + pm_runtime_put(sensor->dev); +} + +/** + * bma023_unregister_input_device - remove input dev + * @sensor: sensor to remove from input + * + * Free the interrupt and input device for the sensor. We must free + * the interrupt first + */ +static void bma023_unregister_input_device(struct bma023_sensor *sensor) +{ + struct i2c_client *client = sensor->client; + if (client->irq > 0) + free_irq(client->irq, sensor); + input_unregister_device(sensor->idev); + sensor->idev = NULL; +} + +/** + * bma023_register_input_device - remove input dev + * @sensor: sensor to remove from input + * + * Add an input device to the sensor. This will be used to report + * events from the sensor itself. + */ +static int bma023_register_input_device(struct bma023_sensor *sensor) +{ + struct i2c_client *client = sensor->client; + struct input_dev *idev; + int ret; + sensor->idev = input_allocate_device(); + idev = sensor->idev; + if (!idev) { + dev_err(&client->dev, "failed to allocate input device\n"); + ret = -ENOMEM; + goto failed_alloc; + } + idev->name = "BMA023 Sensor"; + idev->open = bma023_input_open; + idev->close = bma023_input_close; + idev->id.bustype = BUS_I2C; + idev->dev.parent = &client->dev; + idev->evbit[0] = BIT_MASK(EV_ABS); + input_set_abs_params(idev, ABS_X, BMA023_MIN_VALUE, + BMA023_MAX_VALUE, 0, 0); + input_set_abs_params(idev, ABS_Y, BMA023_MIN_VALUE, + BMA023_MAX_VALUE, 0, 0); + input_set_abs_params(idev, ABS_Z, BMA023_MIN_VALUE, + BMA023_MAX_VALUE, 0, 0); + input_set_drvdata(idev, sensor); + ret = input_register_device(idev); + if (ret) { + dev_err(&client->dev, "failed to register input device\n"); + goto failed_reg; + } + if (client->irq > 0) { + ret = request_threaded_irq(client->irq, NULL, + bma023_interrupt_thread, IRQF_TRIGGER_RISING, + "bma023", sensor); + if (ret) { + dev_err(&client->dev, "can't get IRQ %d, ret %d\n", + client->irq, ret); + goto failed_irq; + } + } + return 0; +failed_irq: + input_unregister_device(idev); + return ret; + +failed_reg: + if (idev) + input_free_device(idev); +failed_alloc: + return ret; +} + +/** + * bma023_probe - device detection callback + * @client: i2c client of found device + * @id: id match information + * + * The I2C layer calls us when it believes a sensor is present at this + * address. Probe to see if this is correct and to validate the device. + * + * If present install the relevant sysfs interfaces and input device. + */ +static int __devinit bma023_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bma023_sensor *sensor; + struct bma023_platform_data *pdata; + int ret; + int auto_delay; /* PM timeout */ + + sensor = kzalloc(sizeof(struct bma023_sensor), GFP_KERNEL); + if (!sensor) { + dev_err(&client->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + pdata = client->dev.platform_data; + sensor->dev = &client->dev; + + sensor->client = client; + i2c_set_clientdata(client, sensor); + + ret = bma023_read_reg(client, BMA023_CHIP_ID_REG); + if (ret < 0) { + dev_err(&client->dev, "failed to detect device\n"); + goto failed_free; + } + if (ret != BMA023_CHIP_ID) { + dev_err(&client->dev, "unsupported chip id\n"); + goto failed_free; + } + + mutex_init(&sensor->lock); + + ret = sysfs_create_group(&client->dev.kobj, &bma023_group); + if (ret) { + dev_err(&client->dev, "failed to create attribute group\n"); + goto failed_free; + } + + pm_runtime_set_active(&client->dev); + + ret = bma023_register_input_device(sensor); + if (ret) + dev_err(&client->dev, "only provide sysfs\n"); + + if (pdata) { + sensor->range = pdata->range; + sensor->bandwidth = pdata->bandwidth; + sensor->new_data_int = pdata->new_data_int; + sensor->hg_int = pdata->hg_int; + sensor->lg_int = pdata->lg_int; + sensor->hg_dur = pdata->hg_dur; + sensor->hg_thres = pdata->hg_thres; + sensor->hg_hyst = pdata->hg_hyst; + sensor->lg_dur = pdata->lg_dur; + sensor->lg_thres = pdata->lg_thres; + sensor->lg_hyst = pdata->lg_hyst; + auto_delay = pdata->auto_delay; + } else { + sensor->range = BMA023_DEFAULT_RANGE; + sensor->bandwidth = BMA023_DEFAULT_BANDWIDTH; + sensor->new_data_int = BMA023_DEFAULT_NEW_DATA_INT; + sensor->hg_int = BMA023_DEFAULT_HG_INT; + sensor->lg_int = BMA023_DEFAULT_LG_INT; + sensor->hg_dur = BMA023_DEFAULT_HG_DURATION; + sensor->hg_thres = BMA023_DEFAULT_HG_THRESHOLD; + sensor->hg_hyst = BMA023_DEFAULT_HG_HYST; + sensor->lg_dur = BMA023_DEFAULT_LG_DURATION; + sensor->lg_thres = BMA023_DEFAULT_LG_THRESHOLD; + sensor->lg_hyst = BMA023_DEFAULT_LG_HYST; + auto_delay = BMA023_DEFAULT_AUTO_DELAY; + } + sensor->power_mode = BMA023_SUSPEND; + + bma023_initialize(sensor); + + pm_runtime_enable(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, auto_delay); + + dev_info(&client->dev, "%s registered\n", id->name); + return 0; + +failed_free: + kfree(sensor); + return ret; +} + +/** + * bam023_remove - remove a sensor + * @client: i2c client of sensor being removed + * + * Our sensor is going away, clean up the resources. + */ +static int __devexit bma023_remove(struct i2c_client *client) +{ + struct bma023_sensor *sensor = i2c_get_clientdata(client); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + + if (sensor->idev) + bma023_unregister_input_device(sensor); + sysfs_remove_group(&client->dev.kobj, &bma023_group); + kfree(sensor); + return 0; +} + +#ifdef CONFIG_PM + +/** + * bma023_suspend - called on device suspend + * @client: i2c client of sensor + * @mesg: actual suspend type + * + * Put the device into sleep mode before we suspend the machine. + */ +static int bma023_suspend(struct i2c_client *client, pm_message_t mesg) +{ + bma023_set_power_mode(client, BMA023_SUSPEND); + return 0; +} + +/** + * bma023_resume - called on device resume + * @client: i2c client of sensor + * + * Put the device into powered mode on resume. + */ +static int bma023_resume(struct i2c_client *client) +{ + struct bma023_sensor *sensor = dev_get_drvdata(&client->dev); + if (bma023_get_check_reg(client) != BMA023_INSPECT_VAL) + bma023_initialize(sensor); + bma023_set_power_mode(client, sensor->power_mode); + msleep(4); /* wait for accel chip resume */ + return 0; +} + +#else +#define bma023_suspend NULL +#define bma023_resume NULL +#endif + +#ifdef CONFIG_PM_RUNTIME + +static int bma023_runtime_suspend(struct device *dev) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + bma023_set_power_mode(sensor->client, BMA023_SUSPEND); + return 0; +} + +static int bma023_runtime_resume(struct device *dev) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + int ret = bma023_set_power_mode(sensor->client, BMA023_RESUME); + if (ret == 0) + msleep(4); /* wait for accel chip resume */ + return ret; +} + +static const struct dev_pm_ops bma023_pm = { + .runtime_suspend = bma023_runtime_suspend, + .runtime_resume = bma023_runtime_resume, +}; +#endif + +static const struct i2c_device_id bma023_ids[] = { + { "bma023", 0 }, + { "smb380", 1 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bma023_ids); + +static struct i2c_driver bma023_i2c_driver = { + .driver = { + .name = "bma023", +#ifdef CONFIG_PM_RUNTIME + .pm = &bma023_pm, +#endif + }, + .probe = bma023_probe, + .remove = __devexit_p(bma023_remove), + .suspend = bma023_suspend, + .resume = bma023_resume, + .id_table = bma023_ids, +}; + +static int __init bma023_init(void) +{ + return i2c_add_driver(&bma023_i2c_driver); +} +module_init(bma023_init); + +static void __exit bma023_exit(void) +{ + i2c_del_driver(&bma023_i2c_driver); +} +module_exit(bma023_exit); + +MODULE_AUTHOR("Kim Kyuwon , Wistron Corp."); +MODULE_DESCRIPTION("BMA023/SMB380 Tri-axis accelerometer driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/i2c/bma023.h b/include/linux/i2c/bma023.h new file mode 100644 index 0000000..7c6e890 --- /dev/null +++ b/include/linux/i2c/bma023.h @@ -0,0 +1,44 @@ +/* + * bma023.h - BMA023 Tri-axis accelerometer driver + * + * Copyright (c) 2010 Samsung Eletronics + * Kyungmin Park + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _BMA023_H_ +#define _BMA023_H_ + +#define BMA023_RANGE_2G 0 +#define BMA023_RANGE_4G 1 +#define BMA023_RANGE_8G 2 + +/* Used to setup the digital filtering bandwidth of ADC output */ +#define BMA023_BW_25HZ 0 +#define BMA023_BW_50HZ 1 +#define BMA023_BW_100HZ 2 +#define BMA023_BW_190HZ 3 +#define BMA023_BW_375HZ 4 +#define BMA023_BW_750HZ 5 +#define BMA023_BW_1500HZ 6 + +struct bma023_platform_data { + u8 range; /* BMA023_RANGE_xxx */ + u8 bandwidth; /* BMA023_BW_xxx */ + u8 new_data_int; /* Set to enable new data interrupt */ + u8 hg_int; /* Set to enable high G interrupt */ + u8 lg_int; /* Set to enable low G interrupt */ + u8 lg_dur; /* Low G duration */ + u8 lg_thres; /* Low G threshold */ + u8 lg_hyst; /* Low G Hysterisis */ + u8 hg_dur; /* Ditto for High G */ + u8 hg_thres; + u8 hg_hyst; + int auto_delay; /* Runtime PM keeps active on use for mS */ +}; + +#endif /* _BMA023_H_ */