From patchwork Wed May 4 09:11:10 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Alan Cox X-Patchwork-Id: 753162 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter2.kernel.org (8.14.4/8.14.3) with ESMTP id p449QiIu019581 for ; Wed, 4 May 2011 09:26:44 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751691Ab1EDJ0n (ORCPT ); Wed, 4 May 2011 05:26:43 -0400 Received: from lxorguk.ukuu.org.uk ([81.2.110.251]:52170 "EHLO lxorguk.ukuu.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751672Ab1EDJ0n (ORCPT ); Wed, 4 May 2011 05:26:43 -0400 X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter2.kernel.org [140.211.167.43]); Wed, 04 May 2011 09:26:44 +0000 (UTC) X-Greylist: delayed 535 seconds by postgrey-1.27 at vger.kernel.org; Wed, 04 May 2011 05:26:42 EDT Received: from bob.linux.org.uk (earthlight.etchedpixels.co.uk [81.2.110.250]) by lxorguk.ukuu.org.uk (8.14.4/8.14.1) with ESMTP id p449ThOB004979; Wed, 4 May 2011 10:29:48 +0100 From: Alan Cox Subject: [PATCH CORRECTED] Add a driver to support InvenSense mpu3050 gyroscope chip. To: linux-input@vger.kernel.org, dmitry.torokhov@gmail.com Date: Wed, 04 May 2011 10:11:10 +0100 Message-ID: <20110504091043.32677.62360.stgit@bob.linux.org.uk> User-Agent: StGIT/0.14.3 MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org (Forgot to refresh the patch before posting the last copy) --- From: Joseph Lai This driver is registered as an input device. An IRQ is required in this basic driver configuration. Signed-off-by: Joseph Lai [Cleaned up PM_RUNTIME defines] [Revised version with corrected no IRQ error handling] Signed-off-by: Alan Cox --- drivers/input/misc/Kconfig | 10 + drivers/input/misc/Makefile | 1 drivers/input/misc/mpu3050.c | 450 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 461 insertions(+), 0 deletions(-) create mode 100644 drivers/input/misc/mpu3050.c -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index f9cf088..ce6eed1 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -467,4 +467,14 @@ config INPUT_XEN_KBDDEV_FRONTEND To compile this driver as a module, choose M here: the module will be called xen-kbdfront. +config INPUT_MPU3050 + tristate "MPU3050 Triaxial gyroscope sensor" + depends on I2C + help + Say Y here if you want to support InvenSense MPU3050 + connected via an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called mpu3050. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index e3f7984..c1a6917 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o +obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c new file mode 100644 index 0000000..f96b7bd --- /dev/null +++ b/drivers/input/misc/mpu3050.c @@ -0,0 +1,450 @@ +/* + * mpu3050.c - MPU3050 Tri-axis gyroscope driver + * + * Copyright (C) 2011 Wistron Co.Ltd + * Joseph Lai + * + * Trimmed down by Alan Cox to produce this version + * + * This is a 'lite' version of the driver, while we consider the right way + * to present the other features to user space. In particular it requires the + * device has an IRQ, and it only provides an input interface, so is not much + * use for device orientation. A fuller version is available from the Meego + * tree. + * + * This program is based on bma023.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MPU3050_CHIP_ID_REG 0x00 +#define MPU3050_CHIP_ID 0x69 +#define MPU3050_XOUT_H 0x1D +#define MPU3050_PWR_MGM 0x3E +#define MPU3050_PWR_MGM_POS 6 +#define MPU3050_PWR_MGM_MASK 0x40 + +#define MPU3050_AUTO_DELAY 1000 + +#define MPU3050_MIN_VALUE -32768 +#define MPU3050_MAX_VALUE 32767 + +struct axis_data { + s16 x; + s16 y; + s16 z; +}; + +struct mpu3050_sensor { + struct i2c_client *client; + struct device *dev; + struct input_dev *idev; + struct mutex lock; +}; + +/** + * mpu3050_xyz_read_reg - read the axes values + * @buffer: provide register addr and get register + * @length: length of register + * + * Reads the register values in one transaction or returns a negative + * error code on failure. + */ +static int mpu3050_xyz_read_reg(struct i2c_client *client, + u8 *buffer, int length) +{ + /* Annoying we can't make this const because the i2c layer doesn't + declare input buffers const */ + char cmd = MPU3050_XOUT_H; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &cmd, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = length, + .buf = buffer, + }, + }; + return i2c_transfer(client->adapter, msg, 2); +} + +/** + * mpu3050_read_xyz - get co-ordinates from device + * @client: i2c address of sensor + * @coords: co-ordinates to update + * + * Return the converted X Y and Z co-ordinates from the sensor device + */ +static int mpu3050_read_xyz(struct i2c_client *client, + struct axis_data *coords) +{ + u16 buffer[3]; + int ret; + + ret = mpu3050_xyz_read_reg(client, (u8 *)buffer, 6); + if (ret < 0) { + dev_warn(&client->dev, "co-ordinate read failed\n"); + return ret; + } + coords->x = be16_to_cpu(buffer[0]); + coords->y = be16_to_cpu(buffer[1]); + coords->z = be16_to_cpu(buffer[2]); + dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__, + coords->x, coords->y, coords->z); + return 0; +} + +/** + * mpu3050_set_power_mode - set the power mode + * @client: i2c client for the sensor + * @val: value to switch on/off of power, 1: normal power, 0: low power + * + * Put device to normal-power mode or low-power mode. + */ +static void mpu3050_set_power_mode(struct i2c_client *client, u8 val) +{ + u8 value; + value = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM); + value = (value & ~MPU3050_PWR_MGM_MASK) | + (((val << MPU3050_PWR_MGM_POS) & MPU3050_PWR_MGM_MASK) ^ + MPU3050_PWR_MGM_MASK); + i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, value); +} + +/** + * mpu3050_sample - read the mpu3050 and create an event + * @sensor: MPU3050 sensor + * + * Read a sample from the device and add it to the input layer events. + * We hold the sensor lock to keep the various I²C transactions apart. + */ +static int mpu3050_sample(struct mpu3050_sensor *sensor) +{ + struct axis_data axis; + int ret; + + mutex_lock(&sensor->lock); + ret = mpu3050_read_xyz(sensor->client, &axis); + mutex_unlock(&sensor->lock); + + if (ret == 0) { + input_report_abs(sensor->idev, ABS_X, axis.x); + input_report_abs(sensor->idev, ABS_Y, axis.y); + input_report_abs(sensor->idev, ABS_Z, axis.z); + input_sync(sensor->idev); + } + return ret; +} + +/** + * mpu3050_interrupt_thread - handle an IRQ + * @irq: interrupt numner + * @data: the sensor + * + * Called by the kernel single threaded after an interrupt occurs. Read + * the sensor data and generate an input event for it. + */ +static irqreturn_t mpu3050_interrupt_thread(int irq, void *data) +{ + mpu3050_sample(data); + return IRQ_HANDLED; +} + +/** + * mpu3050_input_open - called on input event open + * @input: input dev of opened device + * + * The input layer calls this function when input event is opened. The + * function will push the device to resume. Then, the device is ready + * to provide data. + */ +static int mpu3050_input_open(struct input_dev *input) +{ + struct mpu3050_sensor *sensor = input_get_drvdata(input); + pm_runtime_get(sensor->dev); + /* Ensure we have valid data for one shot users */ + mpu3050_sample(sensor); + return 0; +} + +/** + * mpu3050_input_close - called on input event close + * @input: input dev of closed device + * + * The input layer calls this function when input event is closed. The + * function will push the device to suspend. + */ +static void mpu3050_input_close(struct input_dev *input) +{ + struct mpu3050_sensor *sensor = input_get_drvdata(input); + pm_runtime_put(sensor->dev); +} + + +/** + * mpu3050_unregister_input_device - remove input dev + * @sensor: sensor to remove from input + * + * Free the interrupt and input device for the sensor. We must free + * the interrupt first + */ +static void mpu3050_unregister_input_device(struct mpu3050_sensor *sensor) +{ + struct i2c_client *client = sensor->client; + free_irq(client->irq, sensor); + input_unregister_device(sensor->idev); + sensor->idev = NULL; +} + +/** + * mpu3050_register_input_device - remove input dev + * @sensor: sensor to remove from input + * + * Add an input device to the sensor. This will be used to report + * events from the sensor itself. + */ +static int mpu3050_register_input_device(struct mpu3050_sensor *sensor) +{ + struct i2c_client *client = sensor->client; + struct input_dev *idev; + int ret; + + if (!client->irq) { + dev_err(&client->dev, "no interrupt assigned\n"); + return -ENXIO; + } + sensor->idev = input_allocate_device(); + idev = sensor->idev; + if (!idev) { + dev_err(&client->dev, "failed to allocate input device\n"); + ret = -ENOMEM; + goto failed_alloc; + } + idev->name = "MPU3050"; + idev->open = mpu3050_input_open; + idev->close = mpu3050_input_close; + idev->id.bustype = BUS_I2C; + idev->dev.parent = &client->dev; + idev->evbit[0] = BIT_MASK(EV_ABS); + input_set_abs_params(idev, ABS_X, MPU3050_MIN_VALUE, + MPU3050_MAX_VALUE, 0, 0); + input_set_abs_params(idev, ABS_Y, MPU3050_MIN_VALUE, + MPU3050_MAX_VALUE, 0, 0); + input_set_abs_params(idev, ABS_Z, MPU3050_MIN_VALUE, + MPU3050_MAX_VALUE, 0, 0); + input_set_drvdata(idev, sensor); + ret = input_register_device(idev); + if (ret) { + dev_err(&client->dev, "failed to register input device\n"); + goto failed_reg; + } + ret = request_threaded_irq(client->irq, NULL, + mpu3050_interrupt_thread, IRQF_TRIGGER_RISING, + "mpu_int", sensor); + if (ret) { + dev_err(&client->dev, "can't get IRQ %d, ret %d\n", + client->irq, ret); + goto failed_irq; + } + return 0; +failed_irq: + input_unregister_device(idev); + return ret; +failed_reg: + if (idev) + input_free_device(idev); +failed_alloc: + return ret; +} + +/** + * mpu3050_probe - device detection callback + * @client: i2c client of found device + * @id: id match information + * + * The I2C layer calls us when it believes a sensor is present at this + * address. Probe to see if this is correct and to validate the device. + * + * If present install the relevant sysfs interfaces and input device. + */ +static int __devinit mpu3050_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mpu3050_sensor *sensor; + int ret; + sensor = kzalloc(sizeof(struct mpu3050_sensor), GFP_KERNEL); + if (!sensor) { + dev_err(&client->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + sensor->dev = &client->dev; + sensor->client = client; + i2c_set_clientdata(client, sensor); + + mpu3050_set_power_mode(client, 1); + msleep(10); + ret = i2c_smbus_read_byte_data(client, MPU3050_CHIP_ID_REG); + if (ret < 0) { + dev_err(&client->dev, "failed to detect device\n"); + goto failed_free; + } + if (ret != MPU3050_CHIP_ID) { + dev_err(&client->dev, "unsupported chip id\n"); + goto failed_free; + } + + mutex_init(&sensor->lock); + + pm_runtime_set_active(&client->dev); + + ret = mpu3050_register_input_device(sensor); + if (ret) + dev_err(&client->dev, "only provide sysfs\n"); + + pm_runtime_enable(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, MPU3050_AUTO_DELAY); + + dev_info(&client->dev, "%s registered\n", id->name); + return 0; + +failed_free: + kfree(sensor); + return ret; +} + +/** + * mpu3050_remove - remove a sensor + * @client: i2c client of sensor being removed + * + * Our sensor is going away, clean up the resources. + */ +static int __devexit mpu3050_remove(struct i2c_client *client) +{ + struct mpu3050_sensor *sensor = i2c_get_clientdata(client); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + + if (sensor->idev) + mpu3050_unregister_input_device(sensor); + kfree(sensor); + return 0; +} + +#ifdef CONFIG_PM +/** + * mpu3050_suspend - called on device suspend + * @client: i2c client of sensor + * @mesg: actual suspend type + * + * Put the device into sleep mode before we suspend the machine. + */ +static int mpu3050_suspend(struct i2c_client *client, pm_message_t mesg) +{ + mpu3050_set_power_mode(client, 0); + return 0; +} + +/** + * mpu3050_resume - called on device resume + * @client: i2c client of sensor + * + * Put the device into powered mode on resume. + */ +static int mpu3050_resume(struct i2c_client *client) +{ + mpu3050_set_power_mode(client, 1); + msleep(100); /* wait for gyro chip resume */ + return 0; +} +#else +#define mpu3050_suspend NULL +#define mpu3050_resume NULL +#endif + +#ifdef CONFIG_PM_RUNTIME +static int mpu3050_runtime_suspend(struct device *dev) +{ + struct mpu3050_sensor *sensor = dev_get_drvdata(dev); + mpu3050_set_power_mode(sensor->client, 0); + return 0; +} + +static int mpu3050_runtime_resume(struct device *dev) +{ + struct mpu3050_sensor *sensor = dev_get_drvdata(dev); + mpu3050_set_power_mode(sensor->client, 1); + msleep(100); /* wait for gyro chip resume */ + return 0; +} + +static const struct dev_pm_ops mpu3050_pm = { + .runtime_suspend = mpu3050_runtime_suspend, + .runtime_resume = mpu3050_runtime_resume, +}; +#endif + +static const struct i2c_device_id mpu3050_ids[] = { + { "mpu3050", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpu3050_ids); + +static struct i2c_driver mpu3050_i2c_driver = { + .driver = { + .name = "mpu3050", +#ifdef CONFIG_PM_RUNTIME + .pm = &mpu3050_pm, +#endif + }, + .probe = mpu3050_probe, + .remove = __devexit_p(mpu3050_remove), + .suspend = mpu3050_suspend, + .resume = mpu3050_resume, + .id_table = mpu3050_ids, +}; + +static int __init mpu3050_init(void) +{ + return i2c_add_driver(&mpu3050_i2c_driver); +} +module_init(mpu3050_init); + +static void __exit mpu3050_exit(void) +{ + i2c_del_driver(&mpu3050_i2c_driver); +} +module_exit(mpu3050_exit); + +MODULE_AUTHOR("Wistron Corp."); +MODULE_DESCRIPTION("MPU3050 Tri-axis gyroscope driver"); +MODULE_LICENSE("GPL");