From patchwork Tue May 31 16:11:30 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Alan Cox X-Patchwork-Id: 832912 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter2.kernel.org (8.14.4/8.14.3) with ESMTP id p4VGOVcu030528 for ; Tue, 31 May 2011 16:24:31 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753274Ab1EaQYa (ORCPT ); Tue, 31 May 2011 12:24:30 -0400 Received: from lxorguk.ukuu.org.uk ([81.2.110.251]:56442 "EHLO lxorguk.ukuu.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752037Ab1EaQYa (ORCPT ); Tue, 31 May 2011 12:24:30 -0400 Received: from bob.linux.org.uk (earthlight.etchedpixels.co.uk [81.2.110.250]) by lxorguk.ukuu.org.uk (8.14.4/8.14.1) with ESMTP id p4VGRcUN009538; Tue, 31 May 2011 17:27:44 +0100 From: Alan Cox Subject: [PATCH] bma023: Support for Bosch BMA023, BMA150 and SMB380 accelerometers To: linux-input@vger.kernel.org, eric.andersson@unixphere.com Date: Tue, 31 May 2011 17:11:30 +0100 Message-ID: <20110531161129.23115.38014.stgit@bob.linux.org.uk> User-Agent: StGIT/0.14.3 MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter2.kernel.org [140.211.167.43]); Tue, 31 May 2011 16:24:32 +0000 (UTC) From: Joseph Lai This patch supports driver for BOSCH BMA023 and SMB380 which are accelerometers. We expose the data from this device to users through sysfs interface in baically the same manner as the lis drivers so that the data can be used for one off uses, and also as as an input device for joystick type uses. The driver allows the setting and reading of the device's properties via sysfs attributes. Now with documentation for the sysfs interface and pointer to BMA150 data sheet. Based on an original driver Signed-off-by: Donggeun Kim Signed-off-by: Kyungmin Park [Extensively rewritten] Signed-off-by: Joseph Lai [Added the bma150 to the device table] Signed-off-by: Yin Kangkai [Further rewriting, cleanup for upstream] Signed-off-by: Alan Cox --- drivers/input/misc/Kconfig | 10 drivers/input/misc/Makefile | 1 drivers/input/misc/bma023.c | 1313 +++++++++++++++++++++++++++++++++++++++++++ include/linux/i2c/bma023.h | 44 + 4 files changed, 1368 insertions(+), 0 deletions(-) create mode 100644 drivers/input/misc/bma023.c create mode 100644 include/linux/i2c/bma023.h -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index f9cf088..406a730 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -467,4 +467,14 @@ config INPUT_XEN_KBDDEV_FRONTEND To compile this driver as a module, choose M here: the module will be called xen-kbdfront. +config INPUT_BMA023 + tristate "BMA023/SMB380 Triaxial acceleration sensor" + depends on I2C + help + Say Y here if you want to support Bosch BMA023/SMB380 + connected via an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called bma023. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index e3f7984..b7100c2 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o +obj-$(CONFIG_INPUT_BMA023) += bma023.o obj-$(CONFIG_INPUT_CM109) += cm109.o obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o diff --git a/drivers/input/misc/bma023.c b/drivers/input/misc/bma023.c new file mode 100644 index 0000000..1466844 --- /dev/null +++ b/drivers/input/misc/bma023.c @@ -0,0 +1,1313 @@ +/* + * bma023.c - BMA023/150/SMB380 Tri-axis accelerometer driver + * + * Copyright (C) 2010 Samsung Eletronics Co.Ltd + * Kim Kyuwon + * Kyungmin Park + * Donggeun Kim + * + * Copyright (C) 2011 Wistron Co.Ltd + * Joseph Lai + * + * Copyright (c) 2011 Intel Corporation + * Alan Cox + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO (After) + * Investigate if the IRQ disable is really needed (needs that data + * sheet reviewing in more detail) + * + * Data sheet: + * http://www.bosch-sensortec.com/content/language4/downloads/BST-BMA150-DS000-06.pdf + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BMA023_DEFAULT_AUTO_DELAY 250 /* mS */ + +#define BMA023_CHIP_ID_REG 0x00 +#define BMA023_X_LSB_REG 0x02 +#define BMA023_X_MSB_REG 0x03 +#define BMA023_Y_LSB_REG 0x04 +#define BMA023_Y_MSB_REG 0x05 +#define BMA023_Z_LSB_REG 0x06 +#define BMA023_Z_MSB_REG 0x07 +#define BMA023_TEMP_REG 0x08 /* An output of 0 equals -30C, + 1 LSB equals 0.5C */ +#define BMA023_CTRL1_REG 0x0a +#define BMA023_CTRL2_REG 0x0b +#define BMA023_SETTINGS1_REG 0x0c +#define BMA023_SETTINGS2_REG 0x0d +#define BMA023_SETTINGS3_REG 0x0e +#define BMA023_SETTINGS4_REG 0x0f +#define BMA023_SETTINGS5_REG 0x10 +#define BMA023_SETTINGS6_REG 0x11 +#define BMA023_RANGE_BW_REG 0x14 +#define BMA023_CONF2_REG 0x15 + +#define BMA023_CHIP_ID 0x02 + +#define BMA023_NEW_DATA_INT_SHIFT 5 +#define BMA023_NEW_DATA_INT_MASK (0x1 << 5) + +#define BMA023_RANGE_SHIFT 3 +#define BMA023_RANGE_MASK (0x3 << 3) +#define BMA023_BANDWIDTH_SHIFT 0 +#define BMA023_BANDWIDTH_MASK (0x7) + +#define BMA023_HG_HYST_SHIFT 3 +#define BMA023_HG_HYST_MASK (0x7 << 3) +#define BMA023_LG_HYST_SHIFT 0 +#define BMA023_LG_HYST_MASK (0x7) + +#define BMA023_HG_DUR_SHIFT (0x0) +#define BMA023_HG_DUR_MASK (0xff) +#define BMA023_HG_THRES_SHIFT (0x0) +#define BMA023_HG_THRES_MASK (0xff) +#define BMA023_LG_DUR_SHIFT (0x0) +#define BMA023_LG_DUR_MASK (0xff) +#define BMA023_LG_THRES_SHIFT (0x0) +#define BMA023_LG_THRES_MASK (0xff) + +#define BMA023_ENABLE_HG_SHIFT 1 +#define BMA023_ENABLE_HG_MASK (0x1 << 1) +#define BMA023_ENABLE_LG_SHIFT 0 +#define BMA023_ENABLE_LG_MASK (0x1) + +#define BMA023_SLEEP_SHIFT 0 +#define BMA023_SLEEP_MASK (0x1) + +#define BMA023_ACCEL_BITS 10 +#define BMA023_MAX_VALUE ((1 << ((BMA023_ACCEL_BITS) - 1)) - 1) +#define BMA023_MIN_VALUE (-(1 << ((BMA023_ACCEL_BITS) - 1))) + +#define BMA023_DEFAULT_RANGE BMA023_RANGE_2G +#define BMA023_DEFAULT_BANDWIDTH BMA023_BW_190HZ +#define BMA023_DEFAULT_NEW_DATA_INT 0 +#define BMA023_DEFAULT_HG_INT 0 +#define BMA023_DEFAULT_LG_INT 0 +#define BMA023_DEFAULT_HG_DURATION 0x05 +#define BMA023_DEFAULT_HG_THRESHOLD 0xa0 +#define BMA023_DEFAULT_HG_HYST 0 +#define BMA023_DEFAULT_LG_DURATION 0x05 +#define BMA023_DEFAULT_LG_THRESHOLD 0x14 +#define BMA023_DEFAULT_LG_HYST 0 + +#define BMA023_SUSPEND 0 +#define BMA023_RESUME 1 + +#define BMA023_CUSTOMER_REG 0x12 +#define BMA023_INSPECT_VAL 0xBB +#define BMA023_CHECK_SHIFT 0 +#define BMA023_CHECK_MASK 0xff + +struct bma023_data { + s16 x; + s16 y; + s16 z; +}; + +struct bma023_sensor { + struct i2c_client *client; + struct device *dev; + struct input_dev *idev; + struct mutex lock; + struct bma023_data data; + int soft_power; /* Our sysfs requested power status as + opposed to the actual one which is + a combination of this and pm runtime */ + u8 range; + u8 bandwidth; + u8 new_data_int; + u8 hg_int; + u8 lg_int; + u8 lg_dur; + u8 lg_thres; + u8 lg_hyst; + u8 hg_dur; + u8 hg_thres; + u8 hg_hyst; + u8 power_mode; +}; + +/** + * bma023_write_reg - write a BMA023 register via I2C + * @client: our i2c client + * @reg: register being updated + * @val: value to write + * + * Updates the register or returns an error if the write fails. + */ +static int bma023_write_reg(struct i2c_client *client, u8 reg, u8 val) +{ + int ret; + /* + * According to the datasheet, the interrupt should be deactivated + * on the host side when write sequences operate. + */ + disable_irq_nosync(client->irq); + ret = i2c_smbus_write_byte_data(client, reg, val); + enable_irq(client->irq); + if (ret < 0) + dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", + __func__, reg, val, ret); + return ret; +} + +/** + * bma023_read_reg - read a BMA023 register via I2C + * @client: our i2c client + * @reg: register being read + * + * Reads the register or returns a negative error code on failure. + */ +static int bma023_read_reg(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) + dev_err(&client->dev, "%s: reg 0x%x, err %d\n", + __func__, reg, ret); + return ret; +} + +/** + * bma023_xyz_read_reg - read the axes values + * @client: our i2c client + * @buffer: used to return the co-ordinate data + * @length: buffer length + * + * Reads the co-ordinate register values in one transaction or returns a + * negative error code on failure. + */ +static int bma023_xyz_read_reg(struct i2c_client *client, + u8 *buffer, int length) +{ + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = buffer, + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = length, + .buf = buffer, + }, + }; + return i2c_transfer(client->adapter, msg, 2); +} + +/** + * bma023_set_reg_bits - update a subset of register bits + * @client: i2c client for the sensor + * @val: value to write + * @shift: bit offset of field + * @mask: bit mask of field to update + * @reg: register number + * + * Update one of the many bitfield registers on the BMA023 by reading + * and writing back bits. The caller *MUST* hold the sensor lock when + * using this function in order to prevent overlapping updates corrupting + * the register. + * + * Returns success or an error code + */ +static int bma023_set_reg_bits(struct i2c_client *client, + int val, int shift, u8 mask, u8 reg) +{ + int data = bma023_read_reg(client, reg); + + if (data < 0) + return data; + + data = (data & ~mask) | ((val << shift) & mask); + return bma023_write_reg(client, reg, data); +} + +/** + * bma023_get_reg_bits - read register bitfield + * @client: i2c client for the sensor + * @shift: bit offset of field + * @mask: bit mask of field to update + * @reg: register number + * + * Read a bit field from the sensor and return the value of the field. The + * lock is not needed in this case + */ +static int bma023_get_reg_bits(struct i2c_client *client, int shift, + u8 mask, u8 reg) +{ + int data = bma023_read_reg(client, reg); + if (data < 0) + return data; + data = (data & mask) >> shift; + return data; +} + +/* + * Functions for handling all the configurable fields + */ + +/** + * bma023_set_check_reg - set an inspective value + * @client: i2c client for the sensor + * @check: update the inspective value + * + * Set an inspective value to customer's register, which can record + * any value from user. The inspective value will keep until the chip + * off or shutdown. User can recognize the chip needs re-initialize + * or not by this register. + */ +static int bma023_set_check_reg(struct i2c_client *client, u8 check) +{ + return bma023_set_reg_bits(client, check, BMA023_CHECK_SHIFT, + BMA023_CHECK_MASK, BMA023_CUSTOMER_REG); +} + +static int bma023_get_check_reg(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_CHECK_SHIFT, + BMA023_CHECK_MASK, BMA023_CUSTOMER_REG); +} + +/** + * bma023_set_range - set the full scale acceleration range + * @client: i2c client for the sensor + * @range: new range setting + * + * The range of bma023 will affect the chip to change the sensitivity + * of gravitation. The value of range includes +/- 2g, 4g and 8g. + * + * The change of range will respond to 3 axes directly. + */ +static int bma023_set_range(struct i2c_client *client, u8 range) +{ + return bma023_set_reg_bits(client, range, BMA023_RANGE_SHIFT, + BMA023_RANGE_MASK, BMA023_RANGE_BW_REG); +} + +static int bma023_get_range(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_RANGE_SHIFT, + BMA023_RANGE_MASK, BMA023_RANGE_BW_REG); +} + +/** + * bma023_set_bandwidth - set the digital filtering of ADC output data + * @client: i2c client for the sensor + * @bw: new bandwidth setting + * + * The bandwidth affect the ability of noise filter. The value of bandwidth + * includes 25Hz, 50Hz, 100Hz, 190Hz, 375Hz, 750Hz and 1500Hz. + * + * The change of bandwidth will respond to 3 axes directly. + */ +static int bma023_set_bandwidth(struct i2c_client *client, u8 bw) +{ + return bma023_set_reg_bits(client, bw, BMA023_BANDWIDTH_SHIFT, + BMA023_BANDWIDTH_MASK, BMA023_RANGE_BW_REG); +} + +static int bma023_get_bandwidth(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_BANDWIDTH_SHIFT, + BMA023_BANDWIDTH_MASK, BMA023_RANGE_BW_REG); +} + +/** + * bma023_set_new_data_int - switch on/off of new data interrupt + * @client: i2c client for the sensor + * @val: value to switch on/off, 1: on, 0: off + * + * To turn on this interrupt will generate an interrupt when all three + * axes acceleration values are new. + */ +static int bma023_set_new_data_int(struct i2c_client *client, u8 val) +{ + return bma023_set_reg_bits(client, val, BMA023_NEW_DATA_INT_SHIFT, + BMA023_NEW_DATA_INT_MASK, BMA023_CONF2_REG); +} + +static int bma023_get_new_data_int(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_NEW_DATA_INT_SHIFT, + BMA023_NEW_DATA_INT_MASK, BMA023_CONF2_REG); +} + +/** + * bma023_set_hg_int - switch on/off of high-g interrupt + * @client: i2c client for the sensor + * @val: value to switch on/off, 1: on, 0: off + * + * To turn on this interrupt will generate an interrupt when the + * oscillatory criteria is satisfied by hg_dur and hg_thres. + * + * Usually, it is used to debounce the high-g criteria. + */ +static int bma023_set_hg_int(struct i2c_client *client, u8 val) +{ + return bma023_set_reg_bits(client, val, BMA023_ENABLE_HG_SHIFT, + BMA023_ENABLE_HG_MASK, BMA023_CTRL2_REG); +} + +static int bma023_get_hg_int(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_ENABLE_HG_SHIFT, + BMA023_ENABLE_HG_MASK, BMA023_CTRL2_REG); +} + +/** + * bma023_set_lg_int - switch on/off of low-g interrupt + * @client: i2c client for the sensor + * @val: value to switch on/off, 1: on, 0: off + * + * To turn on this setting will generate an interrupt when the + * oscillatory criteria is satisfied by lg_dur and lg_thres. + * + * Usually, it is used to detect a free fall. + */ +static int bma023_set_lg_int(struct i2c_client *client, u8 val) +{ + return bma023_set_reg_bits(client, val, BMA023_ENABLE_LG_SHIFT, + BMA023_ENABLE_LG_MASK, BMA023_CTRL2_REG); +} + +static int bma023_get_lg_int(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_ENABLE_LG_SHIFT, + BMA023_ENABLE_LG_MASK, BMA023_CTRL2_REG); +} + +/** + * bma023_set_lg_dur - set low-g duration + * @client: i2c client for the sensor + * @dur: duration value, 0-255 + * + * Generate an interrupt when the gravitation is detected in low-g + * criterion for long enough duration. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_lg_dur(struct i2c_client *client, u8 dur) +{ + return bma023_set_reg_bits(client, dur, BMA023_LG_DUR_SHIFT, + BMA023_LG_DUR_MASK, BMA023_SETTINGS2_REG); +} + +static int bma023_get_lg_dur(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_LG_DUR_SHIFT, + BMA023_LG_DUR_MASK, BMA023_SETTINGS2_REG); +} + +/** + * bma023_set_lg_thres - set low-g threshold + * @client: i2c client for the sensor + * @thres: threshold value, 0-255 + * + * Filter 3 axes detection and limit to trigger an interrupt signal + * when the gravitation is detected in low-g threshold. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_lg_thres(struct i2c_client *client, u8 thres) +{ + return bma023_set_reg_bits(client, thres, BMA023_LG_THRES_SHIFT, + BMA023_LG_THRES_MASK, BMA023_SETTINGS1_REG); +} + +static int bma023_get_lg_thres(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_LG_THRES_SHIFT, + BMA023_LG_THRES_MASK, BMA023_SETTINGS1_REG); +} + +/** + * bma023_set_lg_hyst - set low-g hysteresis + * @client: i2c client for the sensor + * @hyst: hysteresis value, 0-7 + * + * Expand the range of detectable gravitation to reset an interrupt. + * An interrupt will be latched until outside of low-g criterion with + * hysteresis. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_lg_hyst(struct i2c_client *client, u8 hyst) +{ + return bma023_set_reg_bits(client, hyst, BMA023_LG_HYST_SHIFT, + BMA023_LG_HYST_MASK, BMA023_SETTINGS6_REG); +} + +static int bma023_get_lg_hyst(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_LG_HYST_SHIFT, + BMA023_LG_HYST_MASK, BMA023_SETTINGS6_REG); +} + +/** + * bma023_set_hg_dur - set high-g duration + * @client: i2c client for the sensor + * @dur: duration value, 0-255 + * + * Generate an interrupt when the gravitation is detected in high-g + * criterion for long enough duration. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_hg_dur(struct i2c_client *client, u8 dur) +{ + return bma023_set_reg_bits(client, dur, BMA023_HG_DUR_SHIFT, + BMA023_HG_DUR_MASK, BMA023_SETTINGS4_REG); +} + +static int bma023_get_hg_dur(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_HG_DUR_SHIFT, + BMA023_HG_DUR_MASK, BMA023_SETTINGS4_REG); +} + +/** + * bma023_set_hg_thres - set high-g threshold + * @client: i2c client for the sensor + * @thres: threshold value, 0-255 + * + * Filter 3 axes detection and limit to trigger an interrupt signal + * when the gravitation is detected in high-g threshold. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_hg_thres(struct i2c_client *client, u8 thres) +{ + return bma023_set_reg_bits(client, thres, BMA023_HG_THRES_SHIFT, + BMA023_HG_THRES_MASK, BMA023_SETTINGS3_REG); +} + +static int bma023_get_hg_thres(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_HG_THRES_SHIFT, + BMA023_HG_THRES_MASK, BMA023_SETTINGS3_REG); +} + +/** + * bma023_set_hg_hyst - set low-g hysteresis + * @client: i2c client for the sensor + * @hyst: hysteresis value, 0-7 + * + * Expand the range of detectable gravitation to reset an interrupt. + * An interrupt will be latched until outside of high-g criterion with + * hysteresis. + * + * This setting is used to interrupt detection. + */ +static int bma023_set_hg_hyst(struct i2c_client *client, u8 hyst) +{ + return bma023_set_reg_bits(client, hyst, BMA023_HG_HYST_SHIFT, + BMA023_HG_HYST_MASK, BMA023_SETTINGS6_REG); +} + +static int bma023_get_hg_hyst(struct i2c_client *client) +{ + return bma023_get_reg_bits(client, BMA023_HG_HYST_SHIFT, + BMA023_HG_HYST_MASK, BMA023_SETTINGS6_REG); +} + +/** + * bma023_power_mode - set the power mode + * @client: i2c client for the sensor + * @val: value to switch on/off of power, 1: normal power, 0: low power + * + * Put device to normal-power mode or low-power mode. + */ +static int bma023_set_power_mode(struct i2c_client *client, u8 val) +{ + return bma023_set_reg_bits(client, ~val, BMA023_SLEEP_SHIFT, + BMA023_SLEEP_MASK, BMA023_CTRL1_REG); +} + +static int bma023_get_power_mode(struct i2c_client *client) +{ + return !bma023_get_reg_bits(client, BMA023_SLEEP_SHIFT, + BMA023_SLEEP_MASK, BMA023_CTRL1_REG); +} + +/** + * bma023_correct_accel_sign - convert to expected format + * @val: twos complement value + * + * The description of the digital signals x, y and z is "2' complement". + * So we need to correct the sign of data read by i2c. + */ +static s16 bma023_correct_accel_sign(s16 val) +{ + val <<= (sizeof(s16) * BITS_PER_BYTE - BMA023_ACCEL_BITS); + val >>= (sizeof(s16) * BITS_PER_BYTE - BMA023_ACCEL_BITS); + return val; +} + +/** + * bma023_merge_register_values - turn into co-ordinate + * @lsb: low bits from sensor + * @msb: high bits from sensor + * + * Turns a sensor register reading into a Linux input layer + * value and returns it. + */ +static s16 bma023_merge_register_values(u8 lsb, u8 msb) +{ + s16 val = (msb << 2) | (lsb >> 6); + return bma023_correct_accel_sign(val); +} + +/** + * bma023_read_xyz - get co-ordinates from device + * @client: i2c address of sensor + * @coords: co-ordinates to update + * + * Return the converted X Y and Z co-ordinates from the sensor device + */ +static void bma023_read_xyz(struct i2c_client *client, + struct bma023_data *coords) +{ + u8 buffer[6]; + buffer[0] = BMA023_X_LSB_REG; + bma023_xyz_read_reg(client, buffer, 6); + coords->x = bma023_merge_register_values(buffer[0], buffer[1]); + coords->y = bma023_merge_register_values(buffer[2], buffer[3]); + coords->z = bma023_merge_register_values(buffer[4], buffer[5]); + dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__, + coords->x, coords->y, coords->z); +} + +/** + * bma023_show_xyz - show co-ordinate readings + * @dev: device of sensor + * @attr: device attributes of sysfs node + * @buf: buffer for output + * + * Perform a one off read of the sensor data. In non-interrupt mode + * the sensor can be used for one off reads of the axes rather than + * as an input device. + */ +static ssize_t bma023_show_xyz(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + + mutex_lock(&sensor->lock); + bma023_read_xyz(sensor->client, &sensor->data); + mutex_unlock(&sensor->lock); + + pm_runtime_put(dev); + + return sprintf(buf, "(%d,%d,%d)\n", + sensor->data.x, sensor->data.y, sensor->data.z); +} +static DEVICE_ATTR(accel_data, S_IRUGO, bma023_show_xyz, NULL); + +/** + * bma023_set_attr - set an attribute on the sensor + * @sensor sensor to update + * @buf: buffer to parse + * @count: length of buffer written + * @get: read function to use + * @set: write function to use + * @data: where to store cached result + * + * Helper function for setting attributes of the sensor. This does + * all the parsing and locking in one place calling out to the helper + * functions provided. + */ +static ssize_t bma023_set_attr(struct bma023_sensor *sensor, + const char *buf, size_t count, + int (*get)(struct i2c_client *), + int (*set)(struct i2c_client *, u8 val), + u8 *data) +{ + unsigned long val; + int ret; + + if (!count) + return count; + + ret = strict_strtoul(buf, 10, &val); + if (!ret) { + /* We don't need the device to be fully powered up for this + but we do need to be sure that we force the i²c controller + to be awake */ + pm_runtime_get_sync(sensor->dev); + mutex_lock(&sensor->lock); + ret = set(sensor->client, val); + if (ret >= 0) { + ret = get(sensor->client); + if (ret >= 0) + *data = ret; + } + mutex_unlock(&sensor->lock); + pm_runtime_put(sensor->dev); + if (ret >= 0) + return count; + } + return ret; +} + +/* Methods for the sysfs attributes */ +static ssize_t bma023_show_power_mode(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", bma023_get_power_mode(sensor->client)); +} + +static ssize_t bma023_store_power_mode(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + unsigned long val; + int ret = strict_strtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&sensor->lock); + if (val & !sensor->soft_power) + pm_runtime_get(dev); + else if (!val && sensor->soft_power) + pm_runtime_put(dev); + sensor->soft_power = val; + mutex_unlock(&sensor->lock); + + return count; +} + +static DEVICE_ATTR(power_mode, S_IRUGO | S_IWUSR, + bma023_show_power_mode, bma023_store_power_mode); + +static ssize_t bma023_show_range(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->range); +} + +static ssize_t bma023_store_range(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_range, + bma023_set_range, + &sensor->range); +} + +static DEVICE_ATTR(range, S_IRUGO | S_IWUSR, + bma023_show_range, bma023_store_range); + +static ssize_t bma023_show_bandwidth(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->bandwidth); +} + +static ssize_t bma023_store_bandwidth(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_bandwidth, + bma023_set_bandwidth, + &sensor->bandwidth); +} + +static DEVICE_ATTR(bandwidth, S_IRUGO | S_IWUSR, + bma023_show_bandwidth, bma023_store_bandwidth); + +static ssize_t bma023_show_new_data_int(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->new_data_int); +} + +static ssize_t bma023_store_new_data_int(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_new_data_int, + bma023_set_new_data_int, + &sensor->new_data_int); +} + +static DEVICE_ATTR(new_data_int, S_IRUGO | S_IWUSR, + bma023_show_new_data_int, bma023_store_new_data_int); + +static ssize_t bma023_show_hg_int(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->hg_int); +} + +static ssize_t bma023_store_hg_int(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_hg_int, + bma023_set_hg_int, + &sensor->hg_int); +} + +static DEVICE_ATTR(hg_int, S_IRUGO | S_IWUSR, + bma023_show_hg_int, bma023_store_hg_int); + +static ssize_t bma023_show_lg_int(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->lg_int); +} + +static ssize_t bma023_store_lg_int(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_lg_int, + bma023_set_lg_int, + &sensor->lg_int); +} + +static DEVICE_ATTR(lg_int, S_IRUGO | S_IWUSR, + bma023_show_lg_int, bma023_store_lg_int); + +static ssize_t bma023_show_lg_dur(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->lg_dur); +} + +static ssize_t bma023_store_lg_dur(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_lg_dur, + bma023_set_lg_dur, + &sensor->lg_dur); +} + +static DEVICE_ATTR(lg_dur, S_IRUGO | S_IWUSR, + bma023_show_lg_dur, bma023_store_lg_dur); + +static ssize_t bma023_show_lg_thres(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->lg_thres); +} + +static ssize_t bma023_store_lg_thres(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_lg_thres, + bma023_set_lg_thres, + &sensor->lg_thres); +} + +static DEVICE_ATTR(lg_thres, S_IRUGO | S_IWUSR, + bma023_show_lg_thres, bma023_store_lg_thres); + +static ssize_t bma023_show_lg_hyst(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->lg_hyst); +} + +static ssize_t bma023_store_lg_hyst(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_lg_hyst, + bma023_set_lg_hyst, + &sensor->lg_hyst); +} + +static DEVICE_ATTR(lg_hyst, S_IRUGO | S_IWUSR, + bma023_show_lg_hyst, bma023_store_lg_hyst); + +static ssize_t bma023_show_hg_dur(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->hg_dur); +} + +static ssize_t bma023_store_hg_dur(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_hg_dur, + bma023_set_hg_dur, + &sensor->hg_dur); +} + +static DEVICE_ATTR(hg_dur, S_IRUGO | S_IWUSR, + bma023_show_hg_dur, bma023_store_hg_dur); + +static ssize_t bma023_show_hg_thres(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->hg_thres); +} + +static ssize_t bma023_store_hg_thres(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_hg_thres, + bma023_set_hg_thres, + &sensor->hg_thres); +} + +static DEVICE_ATTR(hg_thres, S_IRUGO | S_IWUSR, + bma023_show_hg_thres, bma023_store_hg_thres); + +static ssize_t bma023_show_hg_hyst(struct device *dev, + struct device_attribute *att, char *buf) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", sensor->hg_hyst); +} + +static ssize_t bma023_store_hg_hyst(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + return bma023_set_attr(sensor, buf, count, + bma023_get_hg_hyst, + bma023_set_hg_hyst, + &sensor->hg_hyst); +} + +static DEVICE_ATTR(hg_hyst, S_IRUGO | S_IWUSR, + bma023_show_hg_hyst, bma023_store_hg_hyst); + +static struct attribute *bma023_attributes[] = { + &dev_attr_accel_data.attr, + &dev_attr_power_mode.attr, + &dev_attr_range.attr, + &dev_attr_bandwidth.attr, + &dev_attr_new_data_int.attr, + &dev_attr_hg_int.attr, + &dev_attr_lg_int.attr, + &dev_attr_lg_dur.attr, + &dev_attr_lg_thres.attr, + &dev_attr_lg_hyst.attr, + &dev_attr_hg_dur.attr, + &dev_attr_hg_thres.attr, + &dev_attr_hg_hyst.attr, + NULL +}; + +static const struct attribute_group bma023_group = { + .attrs = bma023_attributes, +}; + +/** + * bma023_interrupt_thread - handle an IRQ + * @irq: interrupt numner + * @data: the sensor + * + * Called by the kernel single threaded after an interrupt occurs. Read + * the sensor data and generate an input event for it. + */ +static irqreturn_t bma023_interrupt_thread(int irq, void *data) +{ + struct bma023_sensor *sensor = data; + + mutex_lock(&sensor->lock); + bma023_read_xyz(sensor->client, &sensor->data); + mutex_unlock(&sensor->lock); + + input_report_abs(sensor->idev, ABS_X, sensor->data.x); + input_report_abs(sensor->idev, ABS_Y, sensor->data.y); + input_report_abs(sensor->idev, ABS_Z, sensor->data.z); + input_sync(sensor->idev); + + return IRQ_HANDLED; +} + +/** + * bma023_initialize - set sensor parameters + * @sensor: sensor to configure + * + * Load the actual hardware with the sensor values that were provided + */ +static void bma023_initialize(struct bma023_sensor *sensor) +{ + bma023_set_range(sensor->client, sensor->range); + bma023_set_bandwidth(sensor->client, sensor->bandwidth); + bma023_set_new_data_int(sensor->client, sensor->new_data_int); + bma023_set_hg_dur(sensor->client, sensor->hg_dur); + bma023_set_hg_thres(sensor->client, sensor->hg_thres); + bma023_set_hg_hyst(sensor->client, sensor->hg_hyst); + bma023_set_lg_dur(sensor->client, sensor->lg_dur); + bma023_set_lg_thres(sensor->client, sensor->lg_thres); + bma023_set_lg_hyst(sensor->client, sensor->lg_hyst); + bma023_set_hg_int(sensor->client, sensor->hg_int); + bma023_set_lg_int(sensor->client, sensor->lg_int); + bma023_set_power_mode(sensor->client, sensor->power_mode); + bma023_set_check_reg(sensor->client, BMA023_INSPECT_VAL); +} + +/** + * bma023_input_open - called on input event open + * @input: input dev of opened device + * + * The input layer calls this function when input event is opened. The + * function will push the device to resume. Then, the device is ready + * to provide data. + */ +static int bma023_input_open(struct input_dev *input) +{ + struct bma023_sensor *sensor = input_get_drvdata(input); + pm_runtime_get(sensor->dev); + return 0; +} + +/** + * bma023_input_close - called on input event close + * @input: input dev of closed device + * + * The input layer calls this function when input event is closed. The + * function will push the device to suspend. + */ +static void bma023_input_close(struct input_dev *input) +{ + struct bma023_sensor *sensor = input_get_drvdata(input); + pm_runtime_put(sensor->dev); +} + +/** + * bma023_unregister_input_device - remove input dev + * @sensor: sensor to remove from input + * + * Free the interrupt and input device for the sensor. We must free + * the interrupt first + */ +static void bma023_unregister_input_device(struct bma023_sensor *sensor) +{ + struct i2c_client *client = sensor->client; + if (client->irq > 0) + free_irq(client->irq, sensor); + input_unregister_device(sensor->idev); + sensor->idev = NULL; +} + +/** + * bma023_register_input_device - remove input dev + * @sensor: sensor to remove from input + * + * Add an input device to the sensor. This will be used to report + * events from the sensor itself. + */ +static int __devinit bma023_register_input_device(struct bma023_sensor *sensor) +{ + struct i2c_client *client = sensor->client; + struct input_dev *idev; + int ret; + sensor->idev = input_allocate_device(); + idev = sensor->idev; + if (!idev) { + dev_err(&client->dev, "failed to allocate input device\n"); + ret = -ENOMEM; + goto failed_alloc; + } + idev->name = "BMA023 Sensor"; + idev->open = bma023_input_open; + idev->close = bma023_input_close; + idev->id.bustype = BUS_I2C; + idev->dev.parent = &client->dev; + idev->evbit[0] = BIT_MASK(EV_ABS); + input_set_abs_params(idev, ABS_X, BMA023_MIN_VALUE, + BMA023_MAX_VALUE, 0, 0); + input_set_abs_params(idev, ABS_Y, BMA023_MIN_VALUE, + BMA023_MAX_VALUE, 0, 0); + input_set_abs_params(idev, ABS_Z, BMA023_MIN_VALUE, + BMA023_MAX_VALUE, 0, 0); + input_set_drvdata(idev, sensor); + ret = input_register_device(idev); + if (ret) { + dev_err(&client->dev, "failed to register input device\n"); + goto failed_reg; + } + if (client->irq > 0) { + ret = request_threaded_irq(client->irq, NULL, + bma023_interrupt_thread, IRQF_TRIGGER_RISING, + "bma023", sensor); + if (ret) { + dev_err(&client->dev, "can't get IRQ %d, ret %d\n", + client->irq, ret); + goto failed_irq; + } + } + return 0; +failed_irq: + input_unregister_device(idev); + return ret; + +failed_reg: + input_free_device(idev); +failed_alloc: + return ret; +} + +/** + * bma023_probe - device detection callback + * @client: i2c client of found device + * @id: id match information + * + * The I2C layer calls us when it believes a sensor is present at this + * address. Probe to see if this is correct and to validate the device. + * + * If present install the relevant sysfs interfaces and input device. + */ +static int __devinit bma023_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bma023_sensor *sensor; + struct bma023_platform_data *pdata; + int ret; + int auto_delay; /* PM timeout */ + + sensor = kzalloc(sizeof(struct bma023_sensor), GFP_KERNEL); + if (!sensor) { + dev_err(&client->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + pdata = client->dev.platform_data; + sensor->dev = &client->dev; + + sensor->client = client; + i2c_set_clientdata(client, sensor); + + ret = bma023_read_reg(client, BMA023_CHIP_ID_REG); + if (ret < 0) { + dev_err(&client->dev, "failed to detect device\n"); + goto failed_free; + } + if (ret != BMA023_CHIP_ID) { + dev_err(&client->dev, "unsupported chip id\n"); + goto failed_free; + } + + mutex_init(&sensor->lock); + + ret = sysfs_create_group(&client->dev.kobj, &bma023_group); + if (ret) { + dev_err(&client->dev, "failed to create attribute group\n"); + goto failed_free; + } + + pm_runtime_set_active(&client->dev); + + ret = bma023_register_input_device(sensor); + if (ret) + dev_err(&client->dev, "only provide sysfs\n"); + + if (pdata) { + sensor->range = pdata->range; + sensor->bandwidth = pdata->bandwidth; + sensor->new_data_int = pdata->new_data_int; + sensor->hg_int = pdata->hg_int; + sensor->lg_int = pdata->lg_int; + sensor->hg_dur = pdata->hg_dur; + sensor->hg_thres = pdata->hg_thres; + sensor->hg_hyst = pdata->hg_hyst; + sensor->lg_dur = pdata->lg_dur; + sensor->lg_thres = pdata->lg_thres; + sensor->lg_hyst = pdata->lg_hyst; + auto_delay = pdata->auto_delay; + } else { + sensor->range = BMA023_DEFAULT_RANGE; + sensor->bandwidth = BMA023_DEFAULT_BANDWIDTH; + sensor->new_data_int = BMA023_DEFAULT_NEW_DATA_INT; + sensor->hg_int = BMA023_DEFAULT_HG_INT; + sensor->lg_int = BMA023_DEFAULT_LG_INT; + sensor->hg_dur = BMA023_DEFAULT_HG_DURATION; + sensor->hg_thres = BMA023_DEFAULT_HG_THRESHOLD; + sensor->hg_hyst = BMA023_DEFAULT_HG_HYST; + sensor->lg_dur = BMA023_DEFAULT_LG_DURATION; + sensor->lg_thres = BMA023_DEFAULT_LG_THRESHOLD; + sensor->lg_hyst = BMA023_DEFAULT_LG_HYST; + auto_delay = BMA023_DEFAULT_AUTO_DELAY; + } + sensor->power_mode = BMA023_SUSPEND; + + bma023_initialize(sensor); + + pm_runtime_enable(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, auto_delay); + + dev_info(&client->dev, "%s registered\n", id->name); + return 0; + +failed_free: + kfree(sensor); + return ret; +} + +/** + * bam023_remove - remove a sensor + * @client: i2c client of sensor being removed + * + * Our sensor is going away, clean up the resources. + */ +static int __devexit bma023_remove(struct i2c_client *client) +{ + struct bma023_sensor *sensor = i2c_get_clientdata(client); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + + if (sensor->idev) + bma023_unregister_input_device(sensor); + sysfs_remove_group(&client->dev.kobj, &bma023_group); + kfree(sensor); + return 0; +} + +#ifdef CONFIG_PM + +/** + * bma023_suspend - called on device suspend + * @client: i2c client of sensor + * @mesg: actual suspend type + * + * Put the device into sleep mode before we suspend the machine. + */ +static int bma023_suspend(struct i2c_client *client, pm_message_t mesg) +{ + bma023_set_power_mode(client, BMA023_SUSPEND); + return 0; +} + +/** + * bma023_resume - called on device resume + * @client: i2c client of sensor + * + * Put the device into powered mode on resume. + */ +static int bma023_resume(struct i2c_client *client) +{ + struct bma023_sensor *sensor = dev_get_drvdata(&client->dev); + if (bma023_get_check_reg(client) != BMA023_INSPECT_VAL) + bma023_initialize(sensor); + bma023_set_power_mode(client, sensor->power_mode); + msleep(4); /* wait for accel chip resume */ + return 0; +} + +#else +#define bma023_suspend NULL +#define bma023_resume NULL +#endif + +#ifdef CONFIG_PM_RUNTIME + +static int bma023_runtime_suspend(struct device *dev) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + bma023_set_power_mode(sensor->client, BMA023_SUSPEND); + return 0; +} + +static int bma023_runtime_resume(struct device *dev) +{ + struct bma023_sensor *sensor = dev_get_drvdata(dev); + int ret = bma023_set_power_mode(sensor->client, BMA023_RESUME); + if (ret == 0) + msleep(4); /* wait for accel chip resume */ + return ret; +} + +static const struct dev_pm_ops bma023_pm = { + .runtime_suspend = bma023_runtime_suspend, + .runtime_resume = bma023_runtime_resume, +}; +#endif + +static const struct i2c_device_id bma023_ids[] = { + { "bma023", 0 }, + { "smb380", 1 }, + { "bma150", 2 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bma023_ids); + +static struct i2c_driver bma023_i2c_driver = { + .driver = { + .name = "bma023", +#ifdef CONFIG_PM_RUNTIME + .pm = &bma023_pm, +#endif + }, + .probe = bma023_probe, + .remove = __devexit_p(bma023_remove), + .suspend = bma023_suspend, + .resume = bma023_resume, + .id_table = bma023_ids, +}; + +static int __init bma023_init(void) +{ + return i2c_add_driver(&bma023_i2c_driver); +} +module_init(bma023_init); + +static void __exit bma023_exit(void) +{ + i2c_del_driver(&bma023_i2c_driver); +} +module_exit(bma023_exit); + +MODULE_AUTHOR("Kim Kyuwon , Wistron Corp."); +MODULE_DESCRIPTION("BMA023/SMB380 Tri-axis accelerometer driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/i2c/bma023.h b/include/linux/i2c/bma023.h new file mode 100644 index 0000000..7c6e890 --- /dev/null +++ b/include/linux/i2c/bma023.h @@ -0,0 +1,44 @@ +/* + * bma023.h - BMA023 Tri-axis accelerometer driver + * + * Copyright (c) 2010 Samsung Eletronics + * Kyungmin Park + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _BMA023_H_ +#define _BMA023_H_ + +#define BMA023_RANGE_2G 0 +#define BMA023_RANGE_4G 1 +#define BMA023_RANGE_8G 2 + +/* Used to setup the digital filtering bandwidth of ADC output */ +#define BMA023_BW_25HZ 0 +#define BMA023_BW_50HZ 1 +#define BMA023_BW_100HZ 2 +#define BMA023_BW_190HZ 3 +#define BMA023_BW_375HZ 4 +#define BMA023_BW_750HZ 5 +#define BMA023_BW_1500HZ 6 + +struct bma023_platform_data { + u8 range; /* BMA023_RANGE_xxx */ + u8 bandwidth; /* BMA023_BW_xxx */ + u8 new_data_int; /* Set to enable new data interrupt */ + u8 hg_int; /* Set to enable high G interrupt */ + u8 lg_int; /* Set to enable low G interrupt */ + u8 lg_dur; /* Low G duration */ + u8 lg_thres; /* Low G threshold */ + u8 lg_hyst; /* Low G Hysterisis */ + u8 hg_dur; /* Ditto for High G */ + u8 hg_thres; + u8 hg_hyst; + int auto_delay; /* Runtime PM keeps active on use for mS */ +}; + +#endif /* _BMA023_H_ */