Message ID | 20150715212955.GA24393@dtor-ws (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
On Wed, Jul 15, 2015 at 02:29:55PM -0700, Dmitry Torokhov wrote: > Hi Sebastian, > > On Wed, Jul 15, 2015 at 02:13:26PM +0200, Sebastian Reichel wrote: > > > /* read the coordinates */ > > - error = spi_sync(ts->spi, &ts->spi_read_msg); > > + error = regmap_bulk_read(ts->regmap, TSC2005_REG_X, &tsdata, > > + TSC2005_DATA_REGS); > > if (unlikely(error)) > > goto out; > > > > - x = ts->spi_x.spi_rx; > > - y = ts->spi_y.spi_rx; > > - z1 = ts->spi_z1.spi_rx; > > - z2 = ts->spi_z2.spi_rx; > > - > > /* validate position */ > > - if (unlikely(x > MAX_12BIT || y > MAX_12BIT)) > > + if (unlikely(tsdata.x > MAX_12BIT || tsdata.y > MAX_12BIT)) > > goto out; > > > > /* Skip reading if the pressure components are out of range */ > > - if (unlikely(z1 == 0 || z2 > MAX_12BIT || z1 >= z2)) > > + if (unlikely(tsdata.z1 == 0 || tsdata.z2 > MAX_12BIT)) > > + goto out; > > + if (unlikely(tsdata.z1 >= tsdata.z2)) > > goto out; > > I guess that means that tsc2005 is (and was) endian-broken. We can't use > the data off the wire directly... So I'll drop bucnh of the changes in > this function so we can convert to CPU endianness before using. Ah, no, SPI transfers do convert to/from CPU endianness... > > I also got: > > CC [M] drivers/input/touchscreen/tsc2005.o > Building modules, stage 2. > Kernel: arch/x86/boot/bzImage is ready (#1383) > MODPOST 1403 modules > ERROR: "devm_regmap_init_spi" [drivers/input/touchscreen/tsc2005.ko] > undefined! > make[1]: *** [__modpost] Error 1 > make: *** [modules] Error 2 > > I guess we need "select REGMAP_SPI". > > Thanks. > > -- > Dmitry > > > Input: tsc2005 - convert to regmap > > From: Sebastian Reichel <sre@kernel.org> > > Convert driver, so that it uses regmap instead of directly using > spi_transfer for all register accesses. > > Signed-off-by: Sebastian Reichel <sre@kernel.org> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- > drivers/input/touchscreen/Kconfig | 9 +- > drivers/input/touchscreen/tsc2005.c | 149 ++++++++++++----------------------- > 2 files changed, 55 insertions(+), 103 deletions(-) > > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index 9b3da52..c1acbbc 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -915,10 +915,11 @@ config TOUCHSCREEN_TSC_SERIO > module will be called tsc40. > > config TOUCHSCREEN_TSC2005 > - tristate "TSC2005 based touchscreens" > - depends on SPI_MASTER > - help > - Say Y here if you have a TSC2005 based touchscreen. > + tristate "TSC2005 based touchscreens" > + depends on SPI_MASTER > + select REGMAP_SPI > + help > + Say Y here if you have a TSC2005 based touchscreen. > > If unsure, say N. > > diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c > index 2a27a1f..a04248e 100644 > --- a/drivers/input/touchscreen/tsc2005.c > +++ b/drivers/input/touchscreen/tsc2005.c > @@ -34,6 +34,7 @@ > #include <linux/spi/spi.h> > #include <linux/spi/tsc2005.h> > #include <linux/regulator/consumer.h> > +#include <linux/regmap.h> > > /* > * The touchscreen interface operates as follows: > @@ -120,20 +121,36 @@ > #define TSC2005_SPI_MAX_SPEED_HZ 10000000 > #define TSC2005_PENUP_TIME_MS 40 > > -struct tsc2005_spi_rd { > - struct spi_transfer spi_xfer; > - u32 spi_tx; > - u32 spi_rx; > +static const struct regmap_range tsc2005_writable_ranges[] = { > + regmap_reg_range(TSC2005_REG_AUX_HIGH, TSC2005_REG_CFR2), > }; > > +static const struct regmap_access_table tsc2005_writable_table = { > + .yes_ranges = tsc2005_writable_ranges, > + .n_yes_ranges = ARRAY_SIZE(tsc2005_writable_ranges), > +}; > + > +static struct regmap_config tsc2005_regmap_config = { > + .reg_bits = 8, > + .val_bits = 16, > + .reg_stride = 0x08, > + .max_register = 0x78, > + .read_flag_mask = TSC2005_REG_READ, > + .wr_table = &tsc2005_writable_table, > + .use_single_rw = true, > +}; > + > +struct tsc2005_data { > + u16 x; > + u16 y; > + u16 z1; > + u16 z2; > +} __packed; > +#define TSC2005_DATA_REGS 4 > + > struct tsc2005 { > struct spi_device *spi; > - > - struct spi_message spi_read_msg; > - struct tsc2005_spi_rd spi_x; > - struct tsc2005_spi_rd spi_y; > - struct tsc2005_spi_rd spi_z1; > - struct tsc2005_spi_rd spi_z2; > + struct regmap *regmap; > > struct input_dev *idev; > char phys[32]; > @@ -190,62 +207,6 @@ static int tsc2005_cmd(struct tsc2005 *ts, u8 cmd) > return 0; > } > > -static int tsc2005_write(struct tsc2005 *ts, u8 reg, u16 value) > -{ > - u32 tx = ((reg | TSC2005_REG_PND0) << 16) | value; > - struct spi_transfer xfer = { > - .tx_buf = &tx, > - .len = 4, > - .bits_per_word = 24, > - }; > - struct spi_message msg; > - int error; > - > - spi_message_init(&msg); > - spi_message_add_tail(&xfer, &msg); > - > - error = spi_sync(ts->spi, &msg); > - if (error) { > - dev_err(&ts->spi->dev, > - "%s: failed, register: %x, value: %x, error: %d\n", > - __func__, reg, value, error); > - return error; > - } > - > - return 0; > -} > - > -static void tsc2005_setup_read(struct tsc2005_spi_rd *rd, u8 reg, bool last) > -{ > - memset(rd, 0, sizeof(*rd)); > - > - rd->spi_tx = (reg | TSC2005_REG_READ) << 16; > - rd->spi_xfer.tx_buf = &rd->spi_tx; > - rd->spi_xfer.rx_buf = &rd->spi_rx; > - rd->spi_xfer.len = 4; > - rd->spi_xfer.bits_per_word = 24; > - rd->spi_xfer.cs_change = !last; > -} > - > -static int tsc2005_read(struct tsc2005 *ts, u8 reg, u16 *value) > -{ > - struct tsc2005_spi_rd spi_rd; > - struct spi_message msg; > - int error; > - > - tsc2005_setup_read(&spi_rd, reg, true); > - > - spi_message_init(&msg); > - spi_message_add_tail(&spi_rd.spi_xfer, &msg); > - > - error = spi_sync(ts->spi, &msg); > - if (error) > - return error; > - > - *value = spi_rd.spi_rx; > - return 0; > -} > - > static void tsc2005_update_pen_state(struct tsc2005 *ts, > int x, int y, int pressure) > { > @@ -276,17 +237,19 @@ static irqreturn_t tsc2005_irq_thread(int irq, void *_ts) > unsigned int pressure; > u32 x, y; > u32 z1, z2; > + struct tsc2005_data tsdata; > int error; > > /* read the coordinates */ > - error = spi_sync(ts->spi, &ts->spi_read_msg); > + error = regmap_bulk_read(ts->regmap, TSC2005_REG_X, &tsdata, > + TSC2005_DATA_REGS); > if (unlikely(error)) > goto out; > > - x = ts->spi_x.spi_rx; > - y = ts->spi_y.spi_rx; > - z1 = ts->spi_z1.spi_rx; > - z2 = ts->spi_z2.spi_rx; > + x = tsdata.x; > + y = tsdata.y; > + z1 = tsdata.z1; > + z2 = tsdata.z2; > > /* validate position */ > if (unlikely(x > MAX_12BIT || y > MAX_12BIT)) > @@ -346,9 +309,9 @@ static void tsc2005_penup_timer(unsigned long data) > > static void tsc2005_start_scan(struct tsc2005 *ts) > { > - tsc2005_write(ts, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE); > - tsc2005_write(ts, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE); > - tsc2005_write(ts, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE); > + regmap_write(ts->regmap, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE); > + regmap_write(ts->regmap, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE); > + regmap_write(ts->regmap, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE); > tsc2005_cmd(ts, TSC2005_CMD_NORMAL); > } > > @@ -398,9 +361,9 @@ static ssize_t tsc2005_selftest_show(struct device *dev, > { > struct spi_device *spi = to_spi_device(dev); > struct tsc2005 *ts = spi_get_drvdata(spi); > - u16 temp_high; > - u16 temp_high_orig; > - u16 temp_high_test; > + unsigned int temp_high; > + unsigned int temp_high_orig; > + unsigned int temp_high_test; > bool success = true; > int error; > > @@ -411,7 +374,7 @@ static ssize_t tsc2005_selftest_show(struct device *dev, > */ > __tsc2005_disable(ts); > > - error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high_orig); > + error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high_orig); > if (error) { > dev_warn(dev, "selftest failed: read error %d\n", error); > success = false; > @@ -420,14 +383,14 @@ static ssize_t tsc2005_selftest_show(struct device *dev, > > temp_high_test = (temp_high_orig - 1) & MAX_12BIT; > > - error = tsc2005_write(ts, TSC2005_REG_TEMP_HIGH, temp_high_test); > + error = regmap_write(ts->regmap, TSC2005_REG_TEMP_HIGH, temp_high_test); > if (error) { > dev_warn(dev, "selftest failed: write error %d\n", error); > success = false; > goto out; > } > > - error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high); > + error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high); > if (error) { > dev_warn(dev, "selftest failed: read error %d after write\n", > error); > @@ -450,7 +413,7 @@ static ssize_t tsc2005_selftest_show(struct device *dev, > goto out; > > /* test that the reset really happened */ > - error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high); > + error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high); > if (error) { > dev_warn(dev, "selftest failed: read error %d after reset\n", > error); > @@ -503,7 +466,7 @@ static void tsc2005_esd_work(struct work_struct *work) > { > struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work.work); > int error; > - u16 r; > + unsigned int r; > > if (!mutex_trylock(&ts->mutex)) { > /* > @@ -519,7 +482,7 @@ static void tsc2005_esd_work(struct work_struct *work) > goto out; > > /* We should be able to read register without disabling interrupts. */ > - error = tsc2005_read(ts, TSC2005_REG_CFR0, &r); > + error = regmap_read(ts->regmap, TSC2005_REG_CFR0, &r); > if (!error && > !((r ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK)) { > goto out; > @@ -583,20 +546,6 @@ static void tsc2005_close(struct input_dev *input) > mutex_unlock(&ts->mutex); > } > > -static void tsc2005_setup_spi_xfer(struct tsc2005 *ts) > -{ > - tsc2005_setup_read(&ts->spi_x, TSC2005_REG_X, false); > - tsc2005_setup_read(&ts->spi_y, TSC2005_REG_Y, false); > - tsc2005_setup_read(&ts->spi_z1, TSC2005_REG_Z1, false); > - tsc2005_setup_read(&ts->spi_z2, TSC2005_REG_Z2, true); > - > - spi_message_init(&ts->spi_read_msg); > - spi_message_add_tail(&ts->spi_x.spi_xfer, &ts->spi_read_msg); > - spi_message_add_tail(&ts->spi_y.spi_xfer, &ts->spi_read_msg); > - spi_message_add_tail(&ts->spi_z1.spi_xfer, &ts->spi_read_msg); > - spi_message_add_tail(&ts->spi_z2.spi_xfer, &ts->spi_read_msg); > -} > - > static int tsc2005_probe(struct spi_device *spi) > { > const struct tsc2005_platform_data *pdata = dev_get_platdata(&spi->dev); > @@ -661,6 +610,10 @@ static int tsc2005_probe(struct spi_device *spi) > ts->spi = spi; > ts->idev = input_dev; > > + ts->regmap = devm_regmap_init_spi(spi, &tsc2005_regmap_config); > + if (IS_ERR(ts->regmap)) > + return PTR_ERR(ts->regmap); > + > ts->x_plate_ohm = x_plate_ohm; > ts->esd_timeout = esd_timeout; > > @@ -700,8 +653,6 @@ static int tsc2005_probe(struct spi_device *spi) > > INIT_DELAYED_WORK(&ts->esd_work, tsc2005_esd_work); > > - tsc2005_setup_spi_xfer(ts); > - > snprintf(ts->phys, sizeof(ts->phys), > "%s/input-ts", dev_name(&spi->dev)); >
Hi Dmitry, On Wed, Jul 15, 2015 at 02:29:55PM -0700, Dmitry Torokhov wrote: > I also got: > > CC [M] drivers/input/touchscreen/tsc2005.o > Building modules, stage 2. > Kernel: arch/x86/boot/bzImage is ready (#1383) > MODPOST 1403 modules > ERROR: "devm_regmap_init_spi" [drivers/input/touchscreen/tsc2005.ko] > undefined! > make[1]: *** [__modpost] Error 1 > make: *** [modules] Error 2 > > I guess we need "select REGMAP_SPI". Right. I will add this in PATCHv2. -- Sebastian
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 9b3da52..c1acbbc 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -915,10 +915,11 @@ config TOUCHSCREEN_TSC_SERIO module will be called tsc40. config TOUCHSCREEN_TSC2005 - tristate "TSC2005 based touchscreens" - depends on SPI_MASTER - help - Say Y here if you have a TSC2005 based touchscreen. + tristate "TSC2005 based touchscreens" + depends on SPI_MASTER + select REGMAP_SPI + help + Say Y here if you have a TSC2005 based touchscreen. If unsure, say N. diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c index 2a27a1f..a04248e 100644 --- a/drivers/input/touchscreen/tsc2005.c +++ b/drivers/input/touchscreen/tsc2005.c @@ -34,6 +34,7 @@ #include <linux/spi/spi.h> #include <linux/spi/tsc2005.h> #include <linux/regulator/consumer.h> +#include <linux/regmap.h> /* * The touchscreen interface operates as follows: @@ -120,20 +121,36 @@ #define TSC2005_SPI_MAX_SPEED_HZ 10000000 #define TSC2005_PENUP_TIME_MS 40 -struct tsc2005_spi_rd { - struct spi_transfer spi_xfer; - u32 spi_tx; - u32 spi_rx; +static const struct regmap_range tsc2005_writable_ranges[] = { + regmap_reg_range(TSC2005_REG_AUX_HIGH, TSC2005_REG_CFR2), }; +static const struct regmap_access_table tsc2005_writable_table = { + .yes_ranges = tsc2005_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(tsc2005_writable_ranges), +}; + +static struct regmap_config tsc2005_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .reg_stride = 0x08, + .max_register = 0x78, + .read_flag_mask = TSC2005_REG_READ, + .wr_table = &tsc2005_writable_table, + .use_single_rw = true, +}; + +struct tsc2005_data { + u16 x; + u16 y; + u16 z1; + u16 z2; +} __packed; +#define TSC2005_DATA_REGS 4 + struct tsc2005 { struct spi_device *spi; - - struct spi_message spi_read_msg; - struct tsc2005_spi_rd spi_x; - struct tsc2005_spi_rd spi_y; - struct tsc2005_spi_rd spi_z1; - struct tsc2005_spi_rd spi_z2; + struct regmap *regmap; struct input_dev *idev; char phys[32]; @@ -190,62 +207,6 @@ static int tsc2005_cmd(struct tsc2005 *ts, u8 cmd) return 0; } -static int tsc2005_write(struct tsc2005 *ts, u8 reg, u16 value) -{ - u32 tx = ((reg | TSC2005_REG_PND0) << 16) | value; - struct spi_transfer xfer = { - .tx_buf = &tx, - .len = 4, - .bits_per_word = 24, - }; - struct spi_message msg; - int error; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - error = spi_sync(ts->spi, &msg); - if (error) { - dev_err(&ts->spi->dev, - "%s: failed, register: %x, value: %x, error: %d\n", - __func__, reg, value, error); - return error; - } - - return 0; -} - -static void tsc2005_setup_read(struct tsc2005_spi_rd *rd, u8 reg, bool last) -{ - memset(rd, 0, sizeof(*rd)); - - rd->spi_tx = (reg | TSC2005_REG_READ) << 16; - rd->spi_xfer.tx_buf = &rd->spi_tx; - rd->spi_xfer.rx_buf = &rd->spi_rx; - rd->spi_xfer.len = 4; - rd->spi_xfer.bits_per_word = 24; - rd->spi_xfer.cs_change = !last; -} - -static int tsc2005_read(struct tsc2005 *ts, u8 reg, u16 *value) -{ - struct tsc2005_spi_rd spi_rd; - struct spi_message msg; - int error; - - tsc2005_setup_read(&spi_rd, reg, true); - - spi_message_init(&msg); - spi_message_add_tail(&spi_rd.spi_xfer, &msg); - - error = spi_sync(ts->spi, &msg); - if (error) - return error; - - *value = spi_rd.spi_rx; - return 0; -} - static void tsc2005_update_pen_state(struct tsc2005 *ts, int x, int y, int pressure) { @@ -276,17 +237,19 @@ static irqreturn_t tsc2005_irq_thread(int irq, void *_ts) unsigned int pressure; u32 x, y; u32 z1, z2; + struct tsc2005_data tsdata; int error; /* read the coordinates */ - error = spi_sync(ts->spi, &ts->spi_read_msg); + error = regmap_bulk_read(ts->regmap, TSC2005_REG_X, &tsdata, + TSC2005_DATA_REGS); if (unlikely(error)) goto out; - x = ts->spi_x.spi_rx; - y = ts->spi_y.spi_rx; - z1 = ts->spi_z1.spi_rx; - z2 = ts->spi_z2.spi_rx; + x = tsdata.x; + y = tsdata.y; + z1 = tsdata.z1; + z2 = tsdata.z2; /* validate position */ if (unlikely(x > MAX_12BIT || y > MAX_12BIT)) @@ -346,9 +309,9 @@ static void tsc2005_penup_timer(unsigned long data) static void tsc2005_start_scan(struct tsc2005 *ts) { - tsc2005_write(ts, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE); - tsc2005_write(ts, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE); - tsc2005_write(ts, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE); + regmap_write(ts->regmap, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE); + regmap_write(ts->regmap, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE); + regmap_write(ts->regmap, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE); tsc2005_cmd(ts, TSC2005_CMD_NORMAL); } @@ -398,9 +361,9 @@ static ssize_t tsc2005_selftest_show(struct device *dev, { struct spi_device *spi = to_spi_device(dev); struct tsc2005 *ts = spi_get_drvdata(spi); - u16 temp_high; - u16 temp_high_orig; - u16 temp_high_test; + unsigned int temp_high; + unsigned int temp_high_orig; + unsigned int temp_high_test; bool success = true; int error; @@ -411,7 +374,7 @@ static ssize_t tsc2005_selftest_show(struct device *dev, */ __tsc2005_disable(ts); - error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high_orig); + error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high_orig); if (error) { dev_warn(dev, "selftest failed: read error %d\n", error); success = false; @@ -420,14 +383,14 @@ static ssize_t tsc2005_selftest_show(struct device *dev, temp_high_test = (temp_high_orig - 1) & MAX_12BIT; - error = tsc2005_write(ts, TSC2005_REG_TEMP_HIGH, temp_high_test); + error = regmap_write(ts->regmap, TSC2005_REG_TEMP_HIGH, temp_high_test); if (error) { dev_warn(dev, "selftest failed: write error %d\n", error); success = false; goto out; } - error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high); + error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high); if (error) { dev_warn(dev, "selftest failed: read error %d after write\n", error); @@ -450,7 +413,7 @@ static ssize_t tsc2005_selftest_show(struct device *dev, goto out; /* test that the reset really happened */ - error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high); + error = regmap_read(ts->regmap, TSC2005_REG_TEMP_HIGH, &temp_high); if (error) { dev_warn(dev, "selftest failed: read error %d after reset\n", error); @@ -503,7 +466,7 @@ static void tsc2005_esd_work(struct work_struct *work) { struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work.work); int error; - u16 r; + unsigned int r; if (!mutex_trylock(&ts->mutex)) { /* @@ -519,7 +482,7 @@ static void tsc2005_esd_work(struct work_struct *work) goto out; /* We should be able to read register without disabling interrupts. */ - error = tsc2005_read(ts, TSC2005_REG_CFR0, &r); + error = regmap_read(ts->regmap, TSC2005_REG_CFR0, &r); if (!error && !((r ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK)) { goto out; @@ -583,20 +546,6 @@ static void tsc2005_close(struct input_dev *input) mutex_unlock(&ts->mutex); } -static void tsc2005_setup_spi_xfer(struct tsc2005 *ts) -{ - tsc2005_setup_read(&ts->spi_x, TSC2005_REG_X, false); - tsc2005_setup_read(&ts->spi_y, TSC2005_REG_Y, false); - tsc2005_setup_read(&ts->spi_z1, TSC2005_REG_Z1, false); - tsc2005_setup_read(&ts->spi_z2, TSC2005_REG_Z2, true); - - spi_message_init(&ts->spi_read_msg); - spi_message_add_tail(&ts->spi_x.spi_xfer, &ts->spi_read_msg); - spi_message_add_tail(&ts->spi_y.spi_xfer, &ts->spi_read_msg); - spi_message_add_tail(&ts->spi_z1.spi_xfer, &ts->spi_read_msg); - spi_message_add_tail(&ts->spi_z2.spi_xfer, &ts->spi_read_msg); -} - static int tsc2005_probe(struct spi_device *spi) { const struct tsc2005_platform_data *pdata = dev_get_platdata(&spi->dev); @@ -661,6 +610,10 @@ static int tsc2005_probe(struct spi_device *spi) ts->spi = spi; ts->idev = input_dev; + ts->regmap = devm_regmap_init_spi(spi, &tsc2005_regmap_config); + if (IS_ERR(ts->regmap)) + return PTR_ERR(ts->regmap); + ts->x_plate_ohm = x_plate_ohm; ts->esd_timeout = esd_timeout; @@ -700,8 +653,6 @@ static int tsc2005_probe(struct spi_device *spi) INIT_DELAYED_WORK(&ts->esd_work, tsc2005_esd_work); - tsc2005_setup_spi_xfer(ts); - snprintf(ts->phys, sizeof(ts->phys), "%s/input-ts", dev_name(&spi->dev));