diff mbox

[v4,0/2] Avoid selftests on some Asus models

Message ID 20161003051631.GA22473@dtor-ws (mailing list archive)
State New, archived
Headers show

Commit Message

Dmitry Torokhov Oct. 3, 2016, 5:16 a.m. UTC
On Sat, Oct 01, 2016 at 07:56:37AM -0300, Marcos Paulo de Souza wrote:
> ping?

Sorry for the delay, I was trying to wrap my mind around the new
always/never/sometimes logic.

Does the version below still work for you?

Thanks.

Comments

Marcos Paulo de Souza Oct. 3, 2016, 12:07 p.m. UTC | #1
Hi Dmitry,

On Sun, Oct 02, 2016 at 10:16:31PM -0700, Dmitry Torokhov wrote:
> On Sat, Oct 01, 2016 at 07:56:37AM -0300, Marcos Paulo de Souza wrote:
> > ping?
> 
> Sorry for the delay, I was trying to wrap my mind around the new
> always/never/sometimes logic.

No problem.

> 
> Does the version below still work for you?

Yes, still works for me.

Tested-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>

> 
> Thanks.
> 
> -- 
> Dmitry
> 
> Input: i8042 - skip selftest on ASUS laptops
> 
> From: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
> 
> On suspend/resume cycle, selftest is executed to reset i8042 controller.
> But when this is done in Asus devices, subsequent calls to detect/init
> functions to elantech driver fails. Skipping selftest fixes this problem.
> 
> An easier step to reproduce this problem is adding i8042.reset=1 as a
> kernel parameter. On Asus laptops, it'll make the system to start with the
> touchpad already stuck, since psmouse_probe forcibly calls the selftest
> function.
> 
> This patch was inspired by John Hiesey's change[1], but, since this problem
> affects a lot of models of Asus, let's avoid running selftests on them.
> 
> All models affected by this problem:
> A455LD
> K401LB
> K501LB
> K501LX
> R409L
> V502LX
> X302LA
> X450LCP
> X450LD
> X455LAB
> X455LDB
> X455LF
> Z450LA
> 
> [1]: https://marc.info/?l=linux-input&m=144312209020616&w=2
> 
> Fixes: "ETPS/2 Elantech Touchpad dies after resume from suspend"
> (https://bugzilla.kernel.org/show_bug.cgi?id=107971)
> 
> Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
>  Documentation/kernel-parameters.txt     |    9 +++
>  drivers/input/serio/i8042-io.h          |    2 -
>  drivers/input/serio/i8042-ip22io.h      |    2 -
>  drivers/input/serio/i8042-ppcio.h       |    2 -
>  drivers/input/serio/i8042-sparcio.h     |    2 -
>  drivers/input/serio/i8042-unicore32io.h |    2 -
>  drivers/input/serio/i8042-x86ia64io.h   |   96 ++++++++++++++++++++++++++++++-
>  drivers/input/serio/i8042.c             |   55 ++++++++++++++----
>  8 files changed, 150 insertions(+), 20 deletions(-)
> 
> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
> index a4f4d69..46726d4 100644
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -1457,7 +1457,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
>  	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
>  			     controllers
>  	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
> -	i8042.reset	[HW] Reset the controller during init and cleanup
> +	i8042.reset	[HW] Reset the controller during init, cleanup and
> +			     suspend-to-ram transitions, only during s2r
> +			     transitions, or never reset
> +			Format: { 1 | Y | y | 0 | N | n }
> +			1, Y, y: always reset controller
> +			0, N, n: don't ever reset controller
> +			Default: only on s2r transitions on x86; most other
> +			architectures force reset to be always executed
>  	i8042.unlock	[HW] Unlock (ignore) the keylock
>  	i8042.kbdreset  [HW] Reset device connected to KBD port
>  
> diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
> index a5eed2a..34da81c 100644
> --- a/drivers/input/serio/i8042-io.h
> +++ b/drivers/input/serio/i8042-io.h
> @@ -81,7 +81,7 @@ static inline int i8042_platform_init(void)
>  		return -EBUSY;
>  #endif
>  
> -	i8042_reset = 1;
> +	i8042_reset = I8042_RESET_ALWAYS;
>  	return 0;
>  }
>  
> diff --git a/drivers/input/serio/i8042-ip22io.h b/drivers/input/serio/i8042-ip22io.h
> index ee1ad27..08a1c10 100644
> --- a/drivers/input/serio/i8042-ip22io.h
> +++ b/drivers/input/serio/i8042-ip22io.h
> @@ -61,7 +61,7 @@ static inline int i8042_platform_init(void)
>  		return -EBUSY;
>  #endif
>  
> -	i8042_reset = 1;
> +	i8042_reset = I8042_RESET_ALWAYS;
>  
>  	return 0;
>  }
> diff --git a/drivers/input/serio/i8042-ppcio.h b/drivers/input/serio/i8042-ppcio.h
> index f708c75..1aabea4 100644
> --- a/drivers/input/serio/i8042-ppcio.h
> +++ b/drivers/input/serio/i8042-ppcio.h
> @@ -44,7 +44,7 @@ static inline void i8042_write_command(int val)
>  
>  static inline int i8042_platform_init(void)
>  {
> -	i8042_reset = 1;
> +	i8042_reset = I8042_RESET_ALWAYS;
>  	return 0;
>  }
>  
> diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
> index afcd1c1..6231d63 100644
> --- a/drivers/input/serio/i8042-sparcio.h
> +++ b/drivers/input/serio/i8042-sparcio.h
> @@ -130,7 +130,7 @@ static int __init i8042_platform_init(void)
>  		}
>  	}
>  
> -	i8042_reset = 1;
> +	i8042_reset = I8042_RESET_ALWAYS;
>  
>  	return 0;
>  }
> diff --git a/drivers/input/serio/i8042-unicore32io.h b/drivers/input/serio/i8042-unicore32io.h
> index 73f5cc1..4557475 100644
> --- a/drivers/input/serio/i8042-unicore32io.h
> +++ b/drivers/input/serio/i8042-unicore32io.h
> @@ -61,7 +61,7 @@ static inline int i8042_platform_init(void)
>  	if (!request_mem_region(I8042_REGION_START, I8042_REGION_SIZE, "i8042"))
>  		return -EBUSY;
>  
> -	i8042_reset = 1;
> +	i8042_reset = I8042_RESET_ALWAYS;
>  	return 0;
>  }
>  
> diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
> index 60d74e1..07d547d 100644
> --- a/drivers/input/serio/i8042-x86ia64io.h
> +++ b/drivers/input/serio/i8042-x86ia64io.h
> @@ -518,6 +518,90 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
>  	{ }
>  };
>  
> +/*
> + * On some Asus laptops, just running self tests cause problems.
> + */
> +static const struct dmi_system_id i8042_dmi_noselftest_table[] = {
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "A455LD"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "K401LB"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "K501LB"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "K501LX"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "R409L"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "V502LX"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "X302LA"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "X450LD"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "X455LAB"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "X455LDB"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "X455LF"),
> +		},
> +	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Z450LA"),
> +		},
> +	},
> +	{ }
> +};
>  static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
>  	{
>  		/* MSI Wind U-100 */
> @@ -1080,12 +1164,18 @@ static int __init i8042_platform_init(void)
>  		return retval;
>  
>  #if defined(__ia64__)
> -        i8042_reset = true;
> +        i8042_reset = I8042_RESET_ALWAYS;
>  #endif
>  
>  #ifdef CONFIG_X86
> -	if (dmi_check_system(i8042_dmi_reset_table))
> -		i8042_reset = true;
> +	/* Honor module parameter when value is not default */
> +	if (i8042_reset == I8042_RESET_DEFAULT) {
> +		if (dmi_check_system(i8042_dmi_reset_table))
> +			i8042_reset = I8042_RESET_ALWAYS;
> +
> +		if (dmi_check_system(i8042_dmi_noselftest_table))
> +			i8042_reset = I8042_RESET_NEVER;
> +	}
>  
>  	if (dmi_check_system(i8042_dmi_noloop_table))
>  		i8042_noloop = true;
> diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
> index 405252a..89abfdb 100644
> --- a/drivers/input/serio/i8042.c
> +++ b/drivers/input/serio/i8042.c
> @@ -48,9 +48,39 @@ static bool i8042_unlock;
>  module_param_named(unlock, i8042_unlock, bool, 0);
>  MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
>  
> -static bool i8042_reset;
> -module_param_named(reset, i8042_reset, bool, 0);
> -MODULE_PARM_DESC(reset, "Reset controller during init and cleanup.");
> +enum i8042_controller_reset_mode {
> +	I8042_RESET_NEVER,
> +	I8042_RESET_ALWAYS,
> +	I8042_RESET_ON_S2RAM,
> +#define I8042_RESET_DEFAULT	I8042_RESET_ON_S2RAM
> +};
> +static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT;
> +static int i8042_set_reset(const char *val, const struct kernel_param *kp)
> +{
> +	enum i8042_controller_reset_mode *arg = kp->arg;
> +	int error;
> +	bool reset;
> +
> +	if (val) {
> +		error = kstrtobool(val, &reset);
> +		if (error)
> +			return error;
> +	} else {
> +		reset = true;
> +	}
> +
> +	*arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER;
> +	return 0;
> +}
> +
> +static const struct kernel_param_ops param_ops_reset_param = {
> +	.flags = KERNEL_PARAM_OPS_FL_NOARG,
> +	.set = i8042_set_reset,
> +};
> +#define param_check_reset_param(name, p)	\
> +	__param_check(name, p, enum i8042_controller_reset_mode)
> +module_param_named(reset, i8042_reset, reset_param, 0);
> +MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both");
>  
>  static bool i8042_direct;
>  module_param_named(direct, i8042_direct, bool, 0);
> @@ -1019,7 +1049,7 @@ static int i8042_controller_init(void)
>   * Reset the controller and reset CRT to the original value set by BIOS.
>   */
>  
> -static void i8042_controller_reset(bool force_reset)
> +static void i8042_controller_reset(bool s2r_wants_reset)
>  {
>  	i8042_flush();
>  
> @@ -1044,8 +1074,10 @@ static void i8042_controller_reset(bool force_reset)
>   * Reset the controller if requested.
>   */
>  
> -	if (i8042_reset || force_reset)
> +	if (i8042_reset == I8042_RESET_ALWAYS ||
> +	    (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
>  		i8042_controller_selftest();
> +	}
>  
>  /*
>   * Restore the original control register setting.
> @@ -1110,7 +1142,7 @@ static void i8042_dritek_enable(void)
>   * before suspending.
>   */
>  
> -static int i8042_controller_resume(bool force_reset)
> +static int i8042_controller_resume(bool s2r_wants_reset)
>  {
>  	int error;
>  
> @@ -1118,7 +1150,8 @@ static int i8042_controller_resume(bool force_reset)
>  	if (error)
>  		return error;
>  
> -	if (i8042_reset || force_reset) {
> +	if (i8042_reset == I8042_RESET_ALWAYS ||
> +	    (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
>  		error = i8042_controller_selftest();
>  		if (error)
>  			return error;
> @@ -1195,7 +1228,7 @@ static int i8042_pm_resume_noirq(struct device *dev)
>  
>  static int i8042_pm_resume(struct device *dev)
>  {
> -	bool force_reset;
> +	bool want_reset;
>  	int i;
>  
>  	for (i = 0; i < I8042_NUM_PORTS; i++) {
> @@ -1218,9 +1251,9 @@ static int i8042_pm_resume(struct device *dev)
>  	 * off control to the platform firmware, otherwise we can simply restore
>  	 * the mode.
>  	 */
> -	force_reset = pm_resume_via_firmware();
> +	want_reset = pm_resume_via_firmware();
>  
> -	return i8042_controller_resume(force_reset);
> +	return i8042_controller_resume(want_reset);
>  }
>  
>  static int i8042_pm_thaw(struct device *dev)
> @@ -1482,7 +1515,7 @@ static int __init i8042_probe(struct platform_device *dev)
>  
>  	i8042_platform_device = dev;
>  
> -	if (i8042_reset) {
> +	if (i8042_reset == I8042_RESET_ALWAYS) {
>  		error = i8042_controller_selftest();
>  		if (error)
>  			return error;
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a4f4d69..46726d4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1457,7 +1457,14 @@  bytes respectively. Such letter suffixes can also be entirely omitted.
 	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
 			     controllers
 	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
-	i8042.reset	[HW] Reset the controller during init and cleanup
+	i8042.reset	[HW] Reset the controller during init, cleanup and
+			     suspend-to-ram transitions, only during s2r
+			     transitions, or never reset
+			Format: { 1 | Y | y | 0 | N | n }
+			1, Y, y: always reset controller
+			0, N, n: don't ever reset controller
+			Default: only on s2r transitions on x86; most other
+			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset  [HW] Reset device connected to KBD port
 
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index a5eed2a..34da81c 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -81,7 +81,7 @@  static inline int i8042_platform_init(void)
 		return -EBUSY;
 #endif
 
-	i8042_reset = 1;
+	i8042_reset = I8042_RESET_ALWAYS;
 	return 0;
 }
 
diff --git a/drivers/input/serio/i8042-ip22io.h b/drivers/input/serio/i8042-ip22io.h
index ee1ad27..08a1c10 100644
--- a/drivers/input/serio/i8042-ip22io.h
+++ b/drivers/input/serio/i8042-ip22io.h
@@ -61,7 +61,7 @@  static inline int i8042_platform_init(void)
 		return -EBUSY;
 #endif
 
-	i8042_reset = 1;
+	i8042_reset = I8042_RESET_ALWAYS;
 
 	return 0;
 }
diff --git a/drivers/input/serio/i8042-ppcio.h b/drivers/input/serio/i8042-ppcio.h
index f708c75..1aabea4 100644
--- a/drivers/input/serio/i8042-ppcio.h
+++ b/drivers/input/serio/i8042-ppcio.h
@@ -44,7 +44,7 @@  static inline void i8042_write_command(int val)
 
 static inline int i8042_platform_init(void)
 {
-	i8042_reset = 1;
+	i8042_reset = I8042_RESET_ALWAYS;
 	return 0;
 }
 
diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
index afcd1c1..6231d63 100644
--- a/drivers/input/serio/i8042-sparcio.h
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -130,7 +130,7 @@  static int __init i8042_platform_init(void)
 		}
 	}
 
-	i8042_reset = 1;
+	i8042_reset = I8042_RESET_ALWAYS;
 
 	return 0;
 }
diff --git a/drivers/input/serio/i8042-unicore32io.h b/drivers/input/serio/i8042-unicore32io.h
index 73f5cc1..4557475 100644
--- a/drivers/input/serio/i8042-unicore32io.h
+++ b/drivers/input/serio/i8042-unicore32io.h
@@ -61,7 +61,7 @@  static inline int i8042_platform_init(void)
 	if (!request_mem_region(I8042_REGION_START, I8042_REGION_SIZE, "i8042"))
 		return -EBUSY;
 
-	i8042_reset = 1;
+	i8042_reset = I8042_RESET_ALWAYS;
 	return 0;
 }
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 60d74e1..07d547d 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -518,6 +518,90 @@  static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 	{ }
 };
 
+/*
+ * On some Asus laptops, just running self tests cause problems.
+ */
+static const struct dmi_system_id i8042_dmi_noselftest_table[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A455LD"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "K401LB"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "K501LB"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "K501LX"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "R409L"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "V502LX"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X302LA"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X450LD"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X455LAB"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X455LDB"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X455LF"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Z450LA"),
+		},
+	},
+	{ }
+};
 static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
 	{
 		/* MSI Wind U-100 */
@@ -1080,12 +1164,18 @@  static int __init i8042_platform_init(void)
 		return retval;
 
 #if defined(__ia64__)
-        i8042_reset = true;
+        i8042_reset = I8042_RESET_ALWAYS;
 #endif
 
 #ifdef CONFIG_X86
-	if (dmi_check_system(i8042_dmi_reset_table))
-		i8042_reset = true;
+	/* Honor module parameter when value is not default */
+	if (i8042_reset == I8042_RESET_DEFAULT) {
+		if (dmi_check_system(i8042_dmi_reset_table))
+			i8042_reset = I8042_RESET_ALWAYS;
+
+		if (dmi_check_system(i8042_dmi_noselftest_table))
+			i8042_reset = I8042_RESET_NEVER;
+	}
 
 	if (dmi_check_system(i8042_dmi_noloop_table))
 		i8042_noloop = true;
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 405252a..89abfdb 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -48,9 +48,39 @@  static bool i8042_unlock;
 module_param_named(unlock, i8042_unlock, bool, 0);
 MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
 
-static bool i8042_reset;
-module_param_named(reset, i8042_reset, bool, 0);
-MODULE_PARM_DESC(reset, "Reset controller during init and cleanup.");
+enum i8042_controller_reset_mode {
+	I8042_RESET_NEVER,
+	I8042_RESET_ALWAYS,
+	I8042_RESET_ON_S2RAM,
+#define I8042_RESET_DEFAULT	I8042_RESET_ON_S2RAM
+};
+static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT;
+static int i8042_set_reset(const char *val, const struct kernel_param *kp)
+{
+	enum i8042_controller_reset_mode *arg = kp->arg;
+	int error;
+	bool reset;
+
+	if (val) {
+		error = kstrtobool(val, &reset);
+		if (error)
+			return error;
+	} else {
+		reset = true;
+	}
+
+	*arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER;
+	return 0;
+}
+
+static const struct kernel_param_ops param_ops_reset_param = {
+	.flags = KERNEL_PARAM_OPS_FL_NOARG,
+	.set = i8042_set_reset,
+};
+#define param_check_reset_param(name, p)	\
+	__param_check(name, p, enum i8042_controller_reset_mode)
+module_param_named(reset, i8042_reset, reset_param, 0);
+MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both");
 
 static bool i8042_direct;
 module_param_named(direct, i8042_direct, bool, 0);
@@ -1019,7 +1049,7 @@  static int i8042_controller_init(void)
  * Reset the controller and reset CRT to the original value set by BIOS.
  */
 
-static void i8042_controller_reset(bool force_reset)
+static void i8042_controller_reset(bool s2r_wants_reset)
 {
 	i8042_flush();
 
@@ -1044,8 +1074,10 @@  static void i8042_controller_reset(bool force_reset)
  * Reset the controller if requested.
  */
 
-	if (i8042_reset || force_reset)
+	if (i8042_reset == I8042_RESET_ALWAYS ||
+	    (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
 		i8042_controller_selftest();
+	}
 
 /*
  * Restore the original control register setting.
@@ -1110,7 +1142,7 @@  static void i8042_dritek_enable(void)
  * before suspending.
  */
 
-static int i8042_controller_resume(bool force_reset)
+static int i8042_controller_resume(bool s2r_wants_reset)
 {
 	int error;
 
@@ -1118,7 +1150,8 @@  static int i8042_controller_resume(bool force_reset)
 	if (error)
 		return error;
 
-	if (i8042_reset || force_reset) {
+	if (i8042_reset == I8042_RESET_ALWAYS ||
+	    (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
 		error = i8042_controller_selftest();
 		if (error)
 			return error;
@@ -1195,7 +1228,7 @@  static int i8042_pm_resume_noirq(struct device *dev)
 
 static int i8042_pm_resume(struct device *dev)
 {
-	bool force_reset;
+	bool want_reset;
 	int i;
 
 	for (i = 0; i < I8042_NUM_PORTS; i++) {
@@ -1218,9 +1251,9 @@  static int i8042_pm_resume(struct device *dev)
 	 * off control to the platform firmware, otherwise we can simply restore
 	 * the mode.
 	 */
-	force_reset = pm_resume_via_firmware();
+	want_reset = pm_resume_via_firmware();
 
-	return i8042_controller_resume(force_reset);
+	return i8042_controller_resume(want_reset);
 }
 
 static int i8042_pm_thaw(struct device *dev)
@@ -1482,7 +1515,7 @@  static int __init i8042_probe(struct platform_device *dev)
 
 	i8042_platform_device = dev;
 
-	if (i8042_reset) {
+	if (i8042_reset == I8042_RESET_ALWAYS) {
 		error = i8042_controller_selftest();
 		if (error)
 			return error;