@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/rmi.h>
+#include <linux/serio.h>
#include <linux/slab.h>
#include "rmi_driver.h"
@@ -34,6 +35,7 @@ struct mapping_table_entry {
struct rmi_smb_xport {
struct rmi_transport_dev xport;
struct i2c_client *client;
+ struct serio *serio_parent;
struct mutex page_mutex;
int page;
@@ -244,8 +246,13 @@ static void rmi_smb_clear_state(struct rmi_smb_xport *rmi_smb)
static int rmi_smb_enable_smbus_mode(struct rmi_smb_xport *rmi_smb)
{
+ struct rmi_device_platform_data *pdata;
int retval;
+ pdata = dev_get_platdata(&rmi_smb->client->dev);
+
+ serio_deactivate(rmi_smb->serio_parent);
+
/* we need to get the smbus version to activate the touchpad */
retval = rmi_smb_get_version(rmi_smb);
if (retval < 0)
@@ -261,13 +268,6 @@ static int rmi_smb_reset(struct rmi_transport_dev *xport, u16 reset_addr)
rmi_smb_clear_state(rmi_smb);
- /*
- * we do not call the actual reset command, it has to be handled in
- * PS/2 or there will be races between PS/2 and SMBus.
- * PS/2 should ensure that a psmouse_reset is called before
- * intializing the device and after it has been removed to be in a known
- * state.
- */
return rmi_smb_enable_smbus_mode(rmi_smb);
}
@@ -320,10 +320,13 @@ static int rmi_smb_probe(struct i2c_client *client,
rmi_smb->xport.pdata.irq = client->irq;
rmi_smb->xport.proto_name = "smb2";
rmi_smb->xport.ops = &rmi_smb_ops;
+ rmi_smb->serio_parent = pdata->parent;
+
+ serio_deactivate(rmi_smb->serio_parent);
retval = rmi_smb_get_version(rmi_smb);
if (retval < 0)
- return retval;
+ goto fail;
smbus_version = retval;
rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d",
@@ -332,7 +335,8 @@ static int rmi_smb_probe(struct i2c_client *client,
if (smbus_version != 2) {
dev_err(&client->dev, "Unrecognized SMB version %d.\n",
smbus_version);
- return -ENODEV;
+ retval = -ENODEV;
+ goto fail;
}
i2c_set_clientdata(client, rmi_smb);
@@ -342,13 +346,16 @@ static int rmi_smb_probe(struct i2c_client *client,
dev_err(&client->dev, "Failed to register transport driver at 0x%.2X.\n",
client->addr);
i2c_set_clientdata(client, NULL);
- return retval;
+ goto fail;
}
dev_info(&client->dev, "registered rmi smb driver at %#04x.\n",
client->addr);
return 0;
+fail:
+ serio_activate(rmi_smb->serio_parent);
+ return retval;
}
static int rmi_smb_remove(struct i2c_client *client)
@@ -356,6 +363,7 @@ static int rmi_smb_remove(struct i2c_client *client)
struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
rmi_unregister_transport_device(&rmi_smb->xport);
+ serio_activate(rmi_smb->serio_parent);
return 0;
}
@@ -222,6 +222,8 @@ struct rmi_device_platform_data {
struct rmi_2d_sensor_platform_data sensor_pdata;
struct rmi_f01_power_management power_management;
struct rmi_f30_data f30_data;
+
+ struct serio *parent;
};
/**
The SMBus Synaptics devices enumerated as PS/2 devices have the problem of being deaf to I2C if the touchpad has been fully initialized over PS/2 (psmouse_activate being called). A simple PS/2 deactivate command is enough to make it back alive. We forward the serio parent node to rmi_smbus so it can manually deactivate/reactivate the serio node (so we can fallback on PS/2 if a problem happens on SMBus). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> --- drivers/input/rmi4/rmi_smbus.c | 28 ++++++++++++++++++---------- include/linux/rmi.h | 2 ++ 2 files changed, 20 insertions(+), 10 deletions(-)