| Message ID | 20170329182531.17349-1-javier@osg.samsung.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
On Wed, Mar 29, 2017 at 02:25:31PM -0400, Javier Martinez Canillas wrote: > The driver contains compatible strings for different models, but the DT > binding doc only lists one of them. Add the remaining to the document. > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > > .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) "dt-bindings: input: ..." is preferred for the subject, but no need to respin just for that. Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Rob, On 04/03/2017 11:25 AM, Rob Herring wrote: > On Wed, Mar 29, 2017 at 02:25:31PM -0400, Javier Martinez Canillas wrote: >> The driver contains compatible strings for different models, but the DT >> binding doc only lists one of them. Add the remaining to the document. >> >> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> >> --- >> >> .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 7 ++++++- >> 1 file changed, 6 insertions(+), 1 deletion(-) > > "dt-bindings: input: ..." is preferred for the subject, but no need to > respin just for that. > Can we document it in Documentation/devicetree/bindings/submitting-patches.txt? I'm asking because is true that at the beginning we used "dt-bindings: foo" for all DT bindings patches but then many (most?) maintainers started asking for the subsystem subject line to be used for both drivers and DT bindings docs since they would be merging both and also they could miss the DT bindings patches if their subsystem prefix was not used. > Acked-by: Rob Herring <robh@kernel.org> > Best regards,
On Mon, Apr 03, 2017 at 10:25:43AM -0500, Rob Herring wrote: > On Wed, Mar 29, 2017 at 02:25:31PM -0400, Javier Martinez Canillas wrote: > > The driver contains compatible strings for different models, but the DT > > binding doc only lists one of them. Add the remaining to the document. > > > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > > --- > > > > .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 7 ++++++- > > 1 file changed, 6 insertions(+), 1 deletion(-) > > "dt-bindings: input: ..." is preferred for the subject, but no need to > respin just for that. > > Acked-by: Rob Herring <robh@kernel.org> Applied, thank you.
On Mon, Apr 3, 2017 at 10:51 AM, Javier Martinez Canillas <javier@osg.samsung.com> wrote: > Hello Rob, > > On 04/03/2017 11:25 AM, Rob Herring wrote: >> On Wed, Mar 29, 2017 at 02:25:31PM -0400, Javier Martinez Canillas wrote: >>> The driver contains compatible strings for different models, but the DT >>> binding doc only lists one of them. Add the remaining to the document. >>> >>> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> >>> --- >>> >>> .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 7 ++++++- >>> 1 file changed, 6 insertions(+), 1 deletion(-) >> >> "dt-bindings: input: ..." is preferred for the subject, but no need to >> respin just for that. >> > > Can we document it in Documentation/devicetree/bindings/submitting-patches.txt? Yes. Actually, I was thinking of adding the preferred prefixes to MAINTAINERS. Then checkpatch.pl could check it perhaps. > I'm asking because is true that at the beginning we used "dt-bindings: foo" for > all DT bindings patches but then many (most?) maintainers started asking for the > subsystem subject line to be used for both drivers and DT bindings docs since > they would be merging both and also they could miss the DT bindings patches if > their subsystem prefix was not used. I'd argue that most subsys maintainers don't (or they just change it when applying). Mark B does the most. I'm not going to waste any time arguing over it if folks want something different. I'm mainly trying to get rid of subjects like "Documentation: devicetree: bindings: Document the DT binding for foo-bar". :) Rob -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Rob, On 04/03/2017 05:15 PM, Rob Herring wrote: > On Mon, Apr 3, 2017 at 10:51 AM, Javier Martinez Canillas > <javier@osg.samsung.com> wrote: >> Hello Rob, >> >> On 04/03/2017 11:25 AM, Rob Herring wrote: >>> On Wed, Mar 29, 2017 at 02:25:31PM -0400, Javier Martinez Canillas wrote: >>>> The driver contains compatible strings for different models, but the DT >>>> binding doc only lists one of them. Add the remaining to the document. >>>> >>>> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> >>>> --- >>>> >>>> .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 7 ++++++- >>>> 1 file changed, 6 insertions(+), 1 deletion(-) >>> >>> "dt-bindings: input: ..." is preferred for the subject, but no need to >>> respin just for that. >>> >> >> Can we document it in Documentation/devicetree/bindings/submitting-patches.txt? > > Yes. Actually, I was thinking of adding the preferred prefixes to > MAINTAINERS. Then checkpatch.pl could check it perhaps. > That would be great. >> I'm asking because is true that at the beginning we used "dt-bindings: foo" for >> all DT bindings patches but then many (most?) maintainers started asking for the >> subsystem subject line to be used for both drivers and DT bindings docs since >> they would be merging both and also they could miss the DT bindings patches if >> their subsystem prefix was not used. > > I'd argue that most subsys maintainers don't (or they just change it > when applying). Mark B does the most. I'm not going to waste any time > arguing over it if folks want something different. I'm mainly trying > to get rid of subjects like "Documentation: devicetree: bindings: > Document the DT binding for foo-bar". :) > Yeah, I don't have a strong opinion. I just want an authoritative doc so I can refer subsystems maintainers to when they argue that I should use their subsystem prefix instead of "dt-bindings: foo: ..." :) > Rob > Best regards,
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt index ce85ee508238..6aa625e0cb8d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt @@ -1,7 +1,12 @@ * GSL 1680 touchscreen controller Required properties: -- compatible : "silead,gsl1680" +- compatible : Must be one of the following, depending on the model: + "silead,gsl1680" + "silead,gsl1688" + "silead,gsl3670" + "silead,gsl3675" + "silead,gsl3692" - reg : I2C slave address of the chip (0x40) - interrupt-parent : a phandle pointing to the interrupt controller serving the interrupt for this chip
The driver contains compatible strings for different models, but the DT binding doc only lists one of them. Add the remaining to the document. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> --- .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)