@@ -14,36 +14,47 @@
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
-#define VIB_DRV 0x4A
-
-#define VIB_DRV_SEL_MASK 0xf8
-#define VIB_DRV_SEL_SHIFT 0x03
-#define VIB_DRV_EN_MANUAL_MASK 0xfc
-
#define VIB_MAX_LEVEL_mV (3100)
#define VIB_MIN_LEVEL_mV (1200)
#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV)
#define MAX_FF_SPEED 0xff
+struct pm8xxx_regs {
+ unsigned int drv_addr;
+ unsigned int drv_mask;
+ unsigned int drv_shift;
+ unsigned int drv_en_manual_mask;
+};
+
+static struct pm8xxx_regs pm8058_regs = {
+ .drv_addr = 0x4A,
+ .drv_mask = 0xf8,
+ .drv_shift = 3,
+ .drv_en_manual_mask = 0xfc,
+};
+
/**
* struct pm8xxx_vib - structure to hold vibrator data
* @vib_input_dev: input device supporting force feedback
* @work: work structure to set the vibration parameters
* @regmap: regmap for register read/write
+ * @regs: registers' info
* @speed: speed of vibration set from userland
* @active: state of vibrator
* @level: level of vibration to set in the chip
- * @reg_vib_drv: VIB_DRV register value
+ * @reg_vib_drv: regs->drv_addr register value
*/
struct pm8xxx_vib {
struct input_dev *vib_input_dev;
struct work_struct work;
struct regmap *regmap;
+ const struct pm8xxx_regs *regs;
int speed;
int level;
bool active;
@@ -59,13 +70,14 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
{
int rc;
unsigned int val = vib->reg_vib_drv;
+ const struct pm8xxx_regs *regs = vib->regs;
if (on)
- val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK);
+ val |= ((vib->level << regs->drv_shift) & regs->drv_mask);
else
- val &= ~VIB_DRV_SEL_MASK;
+ val &= ~regs->drv_mask;
- rc = regmap_write(vib->regmap, VIB_DRV, val);
+ rc = regmap_write(vib->regmap, regs->drv_addr, val);
if (rc < 0)
return rc;
@@ -80,10 +92,11 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
static void pm8xxx_work_handler(struct work_struct *work)
{
struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work);
+ const struct pm8xxx_regs *regs = vib->regs;
int rc;
unsigned int val;
- rc = regmap_read(vib->regmap, VIB_DRV, &val);
+ rc = regmap_read(vib->regmap, regs->drv_addr, &val);
if (rc < 0)
return;
@@ -147,6 +160,7 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
struct input_dev *input_dev;
int error;
unsigned int val;
+ const struct pm8xxx_regs *regs;
vib = devm_kzalloc(&pdev->dev, sizeof(*vib), GFP_KERNEL);
if (!vib)
@@ -163,16 +177,19 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
INIT_WORK(&vib->work, pm8xxx_work_handler);
vib->vib_input_dev = input_dev;
+ regs = of_device_get_match_data(&pdev->dev);
+
/* operate in manual mode */
- error = regmap_read(vib->regmap, VIB_DRV, &val);
+ error = regmap_read(vib->regmap, regs->drv_addr, &val);
if (error < 0)
return error;
- val &= ~VIB_DRV_EN_MANUAL_MASK;
- error = regmap_write(vib->regmap, VIB_DRV, val);
+ val &= regs->drv_en_manual_mask;
+ error = regmap_write(vib->regmap, regs->drv_addr, val);
if (error < 0)
return error;
+ vib->regs = regs;
vib->reg_vib_drv = val;
input_dev->name = "pm8xxx_vib_ffmemless";
@@ -212,8 +229,8 @@ static int __maybe_unused pm8xxx_vib_suspend(struct device *dev)
static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);
static const struct of_device_id pm8xxx_vib_id_table[] = {
- { .compatible = "qcom,pm8058-vib" },
- { .compatible = "qcom,pm8921-vib" },
+ { .compatible = "qcom,pm8058-vib", .data = &pm8058_regs },
+ { .compatible = "qcom,pm8921-vib", .data = &pm8058_regs },
{ }
};
MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table);
In order to prepare this driver to support other vibrators of the same kind, move some hardcoded values to a structure holding register parameters (address, mask, shit of the control register). Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> --- Changes in v2: - Constified struct pm8xxx_regs - Dropped useless parenthesis in case like ~(reg->mask) drivers/input/misc/pm8xxx-vibrator.c | 49 ++++++++++++++++++++++++------------ 1 file changed, 33 insertions(+), 16 deletions(-)