| Message ID | 20170507214914.6013-1-hdegoede@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Hans, On May 07 2017 or thereabouts, Hans de Goede wrote: > ACPI devices which do not have a _PSC method are assumed to have been > put in D0 by the BIOS, but for touchscreens that is not always true, > so call acpi_device_fix_up_power to explicitly put devices without a > _PSC method into D0 state. > > This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 > device failing to probe with a "hid_descr_cmd failed" error. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c > index ea3c3546cef7..c716d9605940 100644 > --- a/drivers/hid/i2c-hid/i2c-hid.c > +++ b/drivers/hid/i2c-hid/i2c-hid.c > @@ -960,6 +960,15 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, > return 0; > } > > +static void i2c_hid_acpi_fix_up_power(struct device *dev) > +{ > + acpi_handle handle = ACPI_HANDLE(dev); > + struct acpi_device *adev; > + > + if (handle && acpi_bus_get_device(handle, &adev) == 0) > + acpi_device_fix_up_power(adev); I am wondering if this is not something that should be handled by acpi-core or i2c-core. Looks like something pretty generic. Also, isn't this also needed on resume (or reset_resume)? Cheers, Benjamin > +} > + > static const struct acpi_device_id i2c_hid_acpi_match[] = { > {"ACPI0C50", 0 }, > {"PNP0C50", 0 }, > @@ -972,6 +981,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client, > { > return -ENODEV; > } > + > +static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {} > #endif > > #ifdef CONFIG_OF > @@ -1070,6 +1081,8 @@ static int i2c_hid_probe(struct i2c_client *client, > if (ret < 0) > goto err; > > + i2c_hid_acpi_fix_up_power(&client->dev); > + > pm_runtime_get_noresume(&client->dev); > pm_runtime_set_active(&client->dev); > pm_runtime_enable(&client->dev); > -- > 2.12.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 09-05-17 09:12, Benjamin Tissoires wrote: > Hi Hans, > > On May 07 2017 or thereabouts, Hans de Goede wrote: >> ACPI devices which do not have a _PSC method are assumed to have been >> put in D0 by the BIOS, but for touchscreens that is not always true, >> so call acpi_device_fix_up_power to explicitly put devices without a >> _PSC method into D0 state. >> >> This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 >> device failing to probe with a "hid_descr_cmd failed" error. >> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> --- >> drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++++++++ >> 1 file changed, 13 insertions(+) >> >> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c >> index ea3c3546cef7..c716d9605940 100644 >> --- a/drivers/hid/i2c-hid/i2c-hid.c >> +++ b/drivers/hid/i2c-hid/i2c-hid.c >> @@ -960,6 +960,15 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, >> return 0; >> } >> >> +static void i2c_hid_acpi_fix_up_power(struct device *dev) >> +{ >> + acpi_handle handle = ACPI_HANDLE(dev); >> + struct acpi_device *adev; >> + >> + if (handle && acpi_bus_get_device(handle, &adev) == 0) >> + acpi_device_fix_up_power(adev); > > I am wondering if this is not something that should be handled by > acpi-core or i2c-core. Looks like something pretty generic. The acpi-core deliberately does not do this, as unconditionally doing this for all devices is known to break things on some platforms, see: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7cd8407 https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b9e95fc65eded So calling this is something which needs to be done an a device-by-device (usually actually on a driver-by-driver) basis. I don't expect this to cause any problems for i2c-hid devices (as the above commits shown once it was done for all ACPI enumerated devices) and it is necessary for some i2c-hid devices. > Also, isn't this also needed on resume (or reset_resume)? After a suspend the device is in D3, so we will always execute _PS0 to put it back in D0. This is about devices without a _PSC method (which allows querying the actual state) being in D3 on boot, rather then the expected (and assumed) D0. Note that for devices with a _PSC method calling acpi_device_fix_up_power() is a nop. Regards, Hans >> +} >> + >> static const struct acpi_device_id i2c_hid_acpi_match[] = { >> {"ACPI0C50", 0 }, >> {"PNP0C50", 0 }, >> @@ -972,6 +981,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client, >> { >> return -ENODEV; >> } >> + >> +static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {} >> #endif >> >> #ifdef CONFIG_OF >> @@ -1070,6 +1081,8 @@ static int i2c_hid_probe(struct i2c_client *client, >> if (ret < 0) >> goto err; >> >> + i2c_hid_acpi_fix_up_power(&client->dev); >> + >> pm_runtime_get_noresume(&client->dev); >> pm_runtime_set_active(&client->dev); >> pm_runtime_enable(&client->dev); >> -- >> 2.12.2 >> -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On May 09 2017 or thereabouts, Hans de Goede wrote: > Hi, > > On 09-05-17 09:12, Benjamin Tissoires wrote: > > Hi Hans, > > > > On May 07 2017 or thereabouts, Hans de Goede wrote: > > > ACPI devices which do not have a _PSC method are assumed to have been > > > put in D0 by the BIOS, but for touchscreens that is not always true, > > > so call acpi_device_fix_up_power to explicitly put devices without a > > > _PSC method into D0 state. > > > > > > This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 > > > device failing to probe with a "hid_descr_cmd failed" error. > > > > > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > > > --- > > > drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++++++++ > > > 1 file changed, 13 insertions(+) > > > > > > diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c > > > index ea3c3546cef7..c716d9605940 100644 > > > --- a/drivers/hid/i2c-hid/i2c-hid.c > > > +++ b/drivers/hid/i2c-hid/i2c-hid.c > > > @@ -960,6 +960,15 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, > > > return 0; > > > } > > > +static void i2c_hid_acpi_fix_up_power(struct device *dev) > > > +{ > > > + acpi_handle handle = ACPI_HANDLE(dev); > > > + struct acpi_device *adev; > > > + > > > + if (handle && acpi_bus_get_device(handle, &adev) == 0) > > > + acpi_device_fix_up_power(adev); > > > > I am wondering if this is not something that should be handled by > > acpi-core or i2c-core. Looks like something pretty generic. > > The acpi-core deliberately does not do this, as unconditionally > doing this for all devices is known to break things on some > platforms, see: > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7cd8407 > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b9e95fc65eded > > So calling this is something which needs to be done an a device-by-device > (usually actually on a driver-by-driver) basis. > > I don't expect this to cause any problems for i2c-hid devices > (as the above commits shown once it was done for all ACPI enumerated devices) > and it is necessary for some i2c-hid devices. > > > Also, isn't this also needed on resume (or reset_resume)? > > After a suspend the device is in D3, so we will always execute _PS0 > to put it back in D0. This is about devices without a _PSC method > (which allows querying the actual state) being in D3 on boot, rather > then the expected (and assumed) D0. Note that for devices with a _PSC > method calling acpi_device_fix_up_power() is a nop. > Thanks for the extensive explanations. Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Maybe we can add this to the commit message for future reference? Cheers, Benjamin > Regards, > > Hans > > > > +} > > > + > > > static const struct acpi_device_id i2c_hid_acpi_match[] = { > > > {"ACPI0C50", 0 }, > > > {"PNP0C50", 0 }, > > > @@ -972,6 +981,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client, > > > { > > > return -ENODEV; > > > } > > > + > > > +static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {} > > > #endif > > > #ifdef CONFIG_OF > > > @@ -1070,6 +1081,8 @@ static int i2c_hid_probe(struct i2c_client *client, > > > if (ret < 0) > > > goto err; > > > + i2c_hid_acpi_fix_up_power(&client->dev); > > > + > > > pm_runtime_get_noresume(&client->dev); > > > pm_runtime_set_active(&client->dev); > > > pm_runtime_enable(&client->dev); > > > -- > > > 2.12.2 > > > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 09-05-17 09:36, Benjamin Tissoires wrote: > On May 09 2017 or thereabouts, Hans de Goede wrote: >> Hi, >> >> On 09-05-17 09:12, Benjamin Tissoires wrote: >>> Hi Hans, >>> >>> On May 07 2017 or thereabouts, Hans de Goede wrote: >>>> ACPI devices which do not have a _PSC method are assumed to have been >>>> put in D0 by the BIOS, but for touchscreens that is not always true, >>>> so call acpi_device_fix_up_power to explicitly put devices without a >>>> _PSC method into D0 state. >>>> >>>> This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 >>>> device failing to probe with a "hid_descr_cmd failed" error. >>>> >>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >>>> --- >>>> drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++++++++ >>>> 1 file changed, 13 insertions(+) >>>> >>>> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c >>>> index ea3c3546cef7..c716d9605940 100644 >>>> --- a/drivers/hid/i2c-hid/i2c-hid.c >>>> +++ b/drivers/hid/i2c-hid/i2c-hid.c >>>> @@ -960,6 +960,15 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, >>>> return 0; >>>> } >>>> +static void i2c_hid_acpi_fix_up_power(struct device *dev) >>>> +{ >>>> + acpi_handle handle = ACPI_HANDLE(dev); >>>> + struct acpi_device *adev; >>>> + >>>> + if (handle && acpi_bus_get_device(handle, &adev) == 0) >>>> + acpi_device_fix_up_power(adev); >>> >>> I am wondering if this is not something that should be handled by >>> acpi-core or i2c-core. Looks like something pretty generic. >> >> The acpi-core deliberately does not do this, as unconditionally >> doing this for all devices is known to break things on some >> platforms, see: >> >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7cd8407 >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b9e95fc65eded >> >> So calling this is something which needs to be done an a device-by-device >> (usually actually on a driver-by-driver) basis. >> >> I don't expect this to cause any problems for i2c-hid devices >> (as the above commits shown once it was done for all ACPI enumerated devices) >> and it is necessary for some i2c-hid devices. >> >>> Also, isn't this also needed on resume (or reset_resume)? >> >> After a suspend the device is in D3, so we will always execute _PS0 >> to put it back in D0. This is about devices without a _PSC method >> (which allows querying the actual state) being in D3 on boot, rather >> then the expected (and assumed) D0. Note that for devices with a _PSC >> method calling acpi_device_fix_up_power() is a nop. >> > > Thanks for the extensive explanations. > > Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Thank you. > Maybe we can add this to the commit message for future reference? Ok, I'm about to send a v2 with an improved commit msg: "For ACPI devices which do not have a _PSC method, the ACPI subsys cannot query their initial state at boot, so these devices are assumed to have been put in D0 by the BIOS, but for touchscreens that is not always true. This commit adds a call to acpi_device_fix_up_power to explicitly put devices without a _PSC method into D0 state (for devices with a _PSC method it is a nop). Note we only need to do this on probe, after a resume the ACPI subsys knows the device is in D3 and will properly put it in D0. This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 device failing to probe with a "hid_descr_cmd failed" error." Regards, Hans > > Cheers, > Benjamin > >> Regards, >> >> Hans >> >>>> +} >>>> + >>>> static const struct acpi_device_id i2c_hid_acpi_match[] = { >>>> {"ACPI0C50", 0 }, >>>> {"PNP0C50", 0 }, >>>> @@ -972,6 +981,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client, >>>> { >>>> return -ENODEV; >>>> } >>>> + >>>> +static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {} >>>> #endif >>>> #ifdef CONFIG_OF >>>> @@ -1070,6 +1081,8 @@ static int i2c_hid_probe(struct i2c_client *client, >>>> if (ret < 0) >>>> goto err; >>>> + i2c_hid_acpi_fix_up_power(&client->dev); >>>> + >>>> pm_runtime_get_noresume(&client->dev); >>>> pm_runtime_set_active(&client->dev); >>>> pm_runtime_enable(&client->dev); >>>> -- >>>> 2.12.2 >>>> -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On May 09 2017 or thereabouts, Hans de Goede wrote: > Hi, > > On 09-05-17 09:36, Benjamin Tissoires wrote: > > On May 09 2017 or thereabouts, Hans de Goede wrote: > > > Hi, > > > > > > On 09-05-17 09:12, Benjamin Tissoires wrote: > > > > Hi Hans, > > > > > > > > On May 07 2017 or thereabouts, Hans de Goede wrote: > > > > > ACPI devices which do not have a _PSC method are assumed to have been > > > > > put in D0 by the BIOS, but for touchscreens that is not always true, > > > > > so call acpi_device_fix_up_power to explicitly put devices without a > > > > > _PSC method into D0 state. > > > > > > > > > > This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 > > > > > device failing to probe with a "hid_descr_cmd failed" error. > > > > > > > > > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > > > > > --- > > > > > drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++++++++ > > > > > 1 file changed, 13 insertions(+) > > > > > > > > > > diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c > > > > > index ea3c3546cef7..c716d9605940 100644 > > > > > --- a/drivers/hid/i2c-hid/i2c-hid.c > > > > > +++ b/drivers/hid/i2c-hid/i2c-hid.c > > > > > @@ -960,6 +960,15 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, > > > > > return 0; > > > > > } > > > > > +static void i2c_hid_acpi_fix_up_power(struct device *dev) > > > > > +{ > > > > > + acpi_handle handle = ACPI_HANDLE(dev); > > > > > + struct acpi_device *adev; > > > > > + > > > > > + if (handle && acpi_bus_get_device(handle, &adev) == 0) > > > > > + acpi_device_fix_up_power(adev); > > > > > > > > I am wondering if this is not something that should be handled by > > > > acpi-core or i2c-core. Looks like something pretty generic. > > > > > > The acpi-core deliberately does not do this, as unconditionally > > > doing this for all devices is known to break things on some > > > platforms, see: > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7cd8407 > > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b9e95fc65eded > > > > > > So calling this is something which needs to be done an a device-by-device > > > (usually actually on a driver-by-driver) basis. > > > > > > I don't expect this to cause any problems for i2c-hid devices > > > (as the above commits shown once it was done for all ACPI enumerated devices) > > > and it is necessary for some i2c-hid devices. > > > > > > > Also, isn't this also needed on resume (or reset_resume)? > > > > > > After a suspend the device is in D3, so we will always execute _PS0 > > > to put it back in D0. This is about devices without a _PSC method > > > (which allows querying the actual state) being in D3 on boot, rather > > > then the expected (and assumed) D0. Note that for devices with a _PSC > > > method calling acpi_device_fix_up_power() is a nop. > > > > > > > Thanks for the extensive explanations. > > > > Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> > > Thank you. > > > Maybe we can add this to the commit message for future reference? > > Ok, I'm about to send a v2 with an improved commit msg: > > "For ACPI devices which do not have a _PSC method, the ACPI subsys cannot > query their initial state at boot, so these devices are assumed to have > been put in D0 by the BIOS, but for touchscreens that is not always true. > > This commit adds a call to acpi_device_fix_up_power to explicitly put > devices without a _PSC method into D0 state (for devices with a _PSC > method it is a nop). Note we only need to do this on probe, after a > resume the ACPI subsys knows the device is in D3 and will properly > put it in D0. > > This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 > device failing to probe with a "hid_descr_cmd failed" error." Works for me. Thanks for the quick respin. Cheers, Benjamin > > Regards, > > Hans > > > > > > Cheers, > > Benjamin > > > > > Regards, > > > > > > Hans > > > > > > > > +} > > > > > + > > > > > static const struct acpi_device_id i2c_hid_acpi_match[] = { > > > > > {"ACPI0C50", 0 }, > > > > > {"PNP0C50", 0 }, > > > > > @@ -972,6 +981,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client, > > > > > { > > > > > return -ENODEV; > > > > > } > > > > > + > > > > > +static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {} > > > > > #endif > > > > > #ifdef CONFIG_OF > > > > > @@ -1070,6 +1081,8 @@ static int i2c_hid_probe(struct i2c_client *client, > > > > > if (ret < 0) > > > > > goto err; > > > > > + i2c_hid_acpi_fix_up_power(&client->dev); > > > > > + > > > > > pm_runtime_get_noresume(&client->dev); > > > > > pm_runtime_set_active(&client->dev); > > > > > pm_runtime_enable(&client->dev); > > > > > -- > > > > > 2.12.2 > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index ea3c3546cef7..c716d9605940 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -960,6 +960,15 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client, return 0; } +static void i2c_hid_acpi_fix_up_power(struct device *dev) +{ + acpi_handle handle = ACPI_HANDLE(dev); + struct acpi_device *adev; + + if (handle && acpi_bus_get_device(handle, &adev) == 0) + acpi_device_fix_up_power(adev); +} + static const struct acpi_device_id i2c_hid_acpi_match[] = { {"ACPI0C50", 0 }, {"PNP0C50", 0 }, @@ -972,6 +981,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client, { return -ENODEV; } + +static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {} #endif #ifdef CONFIG_OF @@ -1070,6 +1081,8 @@ static int i2c_hid_probe(struct i2c_client *client, if (ret < 0) goto err; + i2c_hid_acpi_fix_up_power(&client->dev); + pm_runtime_get_noresume(&client->dev); pm_runtime_set_active(&client->dev); pm_runtime_enable(&client->dev);
ACPI devices which do not have a _PSC method are assumed to have been put in D0 by the BIOS, but for touchscreens that is not always true, so call acpi_device_fix_up_power to explicitly put devices without a _PSC method into D0 state. This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 device failing to probe with a "hid_descr_cmd failed" error. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)