Message ID | 20170618101829.18734-2-hdegoede@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Sun, Jun 18, 2017 at 12:18:27PM +0200, Hans de Goede wrote: > The icn8505 variant found on some x86 tablets has almost the same protocol > as the 8318, protocol wise there are only a few small differences: > > 1) The 8505 uses 16 bit register addresses and has a different register > address for the location of the touch data. > 2) The 8505 coordinates are in little-endian format instead of in be. > 3) The 8505 allows reading the resolution back from the controller > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > Changes in v2: > -Read resolution directly from the controller > --- > .../bindings/input/touchscreen/chipone_icn8318.txt | 2 +- > drivers/input/touchscreen/Kconfig | 3 +- > drivers/input/touchscreen/chipone_icn8318.c | 81 ++++++++++++++++++---- > 3 files changed, 69 insertions(+), 17 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt > index d11f8d615b5d..9fdd80749386 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt > @@ -1,7 +1,7 @@ > * ChipOne icn8318 I2C touchscreen controller > > Required properties: > - - compatible : "chipone,icn8318" > + - compatible : "chipone,icn8318" or "chipone,icn8505" > - reg : I2C slave address of the chip (0x40) > - interrupt-parent : a phandle pointing to the interrupt controller > serving the interrupt for this chip > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index cf26ca49ae6d..fff1467506e7 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -157,7 +157,8 @@ config TOUCHSCREEN_CHIPONE_ICN8318 > depends on I2C > depends on OF > help > - Say Y here if you have a ChipOne icn8318 based I2C touchscreen. > + Say Y here if you have a ChipOne icn8318 or icn8505 based > + I2C touchscreen. > > If unsure, say N. > > diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c > index ddaae91f02fc..43cc38734d8e 100644 > --- a/drivers/input/touchscreen/chipone_icn8318.c > +++ b/drivers/input/touchscreen/chipone_icn8318.c > @@ -1,7 +1,7 @@ > /* > * Driver for ChipOne icn8318 i2c touchscreen controller > * > - * Copyright (c) 2015 Red Hat Inc. > + * Copyright (c) 2015-2017 Red Hat Inc. > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > @@ -20,6 +20,7 @@ > #include <linux/input/touchscreen.h> > #include <linux/module.h> > #include <linux/of.h> > +#include <linux/of_device.h> > > #define ICN8318_REG_POWER 4 > #define ICN8318_REG_TOUCHDATA 16 > @@ -30,6 +31,14 @@ > > #define ICN8318_MAX_TOUCHES 5 > > +#define ICN8505_REG_TOUCHDATA 0x1000 > +#define ICN8505_REG_CONFIGDATA 0x8000 > + > +enum icn8318_model { > + ICN8318, > + ICN8505, > +}; > + > struct icn8318_touch { > __u8 slot; > __be16 x; > @@ -54,27 +63,37 @@ struct icn8318_data { > struct input_dev *input; > struct gpio_desc *wake_gpio; > struct touchscreen_properties prop; > + enum icn8318_model model; > + int touchdata_reg; > }; > > -static int icn8318_read_touch_data(struct i2c_client *client, > - struct icn8318_touch_data *touch_data) > +static int icn8318_read_data(struct icn8318_data *data, int reg, > + void *buf, int len) > { > - u8 reg = ICN8318_REG_TOUCHDATA; > + u8 addr[2]; > struct i2c_msg msg[2] = { > { > - .addr = client->addr, > - .len = 1, > - .buf = ® > + .addr = data->client->addr, > + .buf = addr > }, > { > - .addr = client->addr, > + .addr = data->client->addr, > .flags = I2C_M_RD, > - .len = sizeof(struct icn8318_touch_data), > - .buf = (u8 *)touch_data > + .len = len, > + .buf = buf > } > }; > > - return i2c_transfer(client->adapter, msg, 2); > + if (data->model == ICN8318) { > + addr[0] = reg; > + msg[0].len = 1; > + } else { > + addr[0] = reg >> 8; > + addr[1] = reg & 0xff; > + msg[0].len = 2; > + } > + > + return i2c_transfer(data->client->adapter, msg, 2); > } > > static inline bool icn8318_touch_active(u8 event) > @@ -83,6 +102,14 @@ static inline bool icn8318_touch_active(u8 event) > (event == ICN8318_EVENT_UPDATE2); > } > > +static u16 icn8318_coord_to_cpu(struct icn8318_data *data, __be16 coord) > +{ > + if (data->model == ICN8318) > + return be16_to_cpu(coord); > + else > + return le16_to_cpu((__force __le16)coord); Hmm, this is quite ugly now. I'd drop the __be16 designations on touch->x/y, made them u8 x[2], y[2], and used get_unaligned_le16() and get_unaligned_be16() on them... I also wonder if it would not be cleaner if instead of model constant you used cost struct with pointers and other chip-specific data. > +} > + > static irqreturn_t icn8318_irq(int irq, void *dev_id) > { > struct icn8318_data *data = dev_id; > @@ -90,7 +117,8 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id) > struct icn8318_touch_data touch_data; > int i, ret; > > - ret = icn8318_read_touch_data(data->client, &touch_data); > + ret = icn8318_read_data(data, data->touchdata_reg, > + &touch_data, sizeof(touch_data)); > if (ret < 0) { > dev_err(dev, "Error reading touch data: %d\n", ret); > return IRQ_HANDLED; > @@ -122,8 +150,9 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id) > continue; > > touchscreen_report_pos(data->input, &data->prop, > - be16_to_cpu(touch->x), > - be16_to_cpu(touch->y), true); > + icn8318_coord_to_cpu(data, touch->x), > + icn8318_coord_to_cpu(data, touch->y), > + true); > } > > input_mt_sync_frame(data->input); > @@ -187,6 +216,8 @@ static int icn8318_probe_of(struct icn8318_data *data, struct device *dev) > { > int error; > > + data->model = (long)of_device_get_match_data(dev); > + > data->wake_gpio = devm_gpiod_get(dev, "wake", GPIOD_OUT_LOW); > if (IS_ERR(data->wake_gpio)) { > error = PTR_ERR(data->wake_gpio); > @@ -210,6 +241,7 @@ static int icn8318_probe(struct i2c_client *client) > struct icn8318_data *data; > struct input_dev *input; > int error; > + __le16 resolution[2]; > > if (!client->irq) { > dev_err(dev, "Error no irq specified\n"); > @@ -240,6 +272,24 @@ static int icn8318_probe(struct i2c_client *client) > if (error) > return error; > > + if (data->model == ICN8318) { > + data->touchdata_reg = ICN8318_REG_TOUCHDATA; > + } else { > + data->touchdata_reg = ICN8505_REG_TOUCHDATA; > + > + error = icn8318_read_data(data, ICN8505_REG_CONFIGDATA, > + resolution, sizeof(resolution)); > + if (error < 0) { > + dev_err(dev, "Error reading resolution: %d\n", error); > + return error; > + } > + > + input_set_abs_params(input, ABS_MT_POSITION_X, 0, > + le16_to_cpu(resolution[0]) - 1, 0, 0); > + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, > + le16_to_cpu(resolution[1]) - 1, 0, 0); > + } > + > touchscreen_parse_properties(input, true, &data->prop); > if (!input_abs_get_max(input, ABS_MT_POSITION_X) || > !input_abs_get_max(input, ABS_MT_POSITION_Y)) { > @@ -274,7 +324,8 @@ static int icn8318_probe(struct i2c_client *client) > } > > static const struct of_device_id icn8318_of_match[] = { > - { .compatible = "chipone,icn8318" }, > + { .compatible = "chipone,icn8318", .data = (void *)ICN8318 }, > + { .compatible = "chipone,icn8505", .data = (void *)ICN8505 }, > { } > }; > MODULE_DEVICE_TABLE(of, icn8318_of_match); > -- > 2.13.0 >
Hi, On 19-06-17 00:06, Dmitry Torokhov wrote: > On Sun, Jun 18, 2017 at 12:18:27PM +0200, Hans de Goede wrote: >> The icn8505 variant found on some x86 tablets has almost the same protocol >> as the 8318, protocol wise there are only a few small differences: >> >> 1) The 8505 uses 16 bit register addresses and has a different register >> address for the location of the touch data. >> 2) The 8505 coordinates are in little-endian format instead of in be. >> 3) The 8505 allows reading the resolution back from the controller >> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> --- >> Changes in v2: >> -Read resolution directly from the controller >> --- >> .../bindings/input/touchscreen/chipone_icn8318.txt | 2 +- >> drivers/input/touchscreen/Kconfig | 3 +- >> drivers/input/touchscreen/chipone_icn8318.c | 81 ++++++++++++++++++---- >> 3 files changed, 69 insertions(+), 17 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt >> index d11f8d615b5d..9fdd80749386 100644 >> --- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt >> +++ b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt >> @@ -1,7 +1,7 @@ >> * ChipOne icn8318 I2C touchscreen controller >> >> Required properties: >> - - compatible : "chipone,icn8318" >> + - compatible : "chipone,icn8318" or "chipone,icn8505" >> - reg : I2C slave address of the chip (0x40) >> - interrupt-parent : a phandle pointing to the interrupt controller >> serving the interrupt for this chip >> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig >> index cf26ca49ae6d..fff1467506e7 100644 >> --- a/drivers/input/touchscreen/Kconfig >> +++ b/drivers/input/touchscreen/Kconfig >> @@ -157,7 +157,8 @@ config TOUCHSCREEN_CHIPONE_ICN8318 >> depends on I2C >> depends on OF >> help >> - Say Y here if you have a ChipOne icn8318 based I2C touchscreen. >> + Say Y here if you have a ChipOne icn8318 or icn8505 based >> + I2C touchscreen. >> >> If unsure, say N. >> >> diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c >> index ddaae91f02fc..43cc38734d8e 100644 >> --- a/drivers/input/touchscreen/chipone_icn8318.c >> +++ b/drivers/input/touchscreen/chipone_icn8318.c >> @@ -1,7 +1,7 @@ >> /* >> * Driver for ChipOne icn8318 i2c touchscreen controller >> * >> - * Copyright (c) 2015 Red Hat Inc. >> + * Copyright (c) 2015-2017 Red Hat Inc. >> * >> * This program is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License as published by >> @@ -20,6 +20,7 @@ >> #include <linux/input/touchscreen.h> >> #include <linux/module.h> >> #include <linux/of.h> >> +#include <linux/of_device.h> >> >> #define ICN8318_REG_POWER 4 >> #define ICN8318_REG_TOUCHDATA 16 >> @@ -30,6 +31,14 @@ >> >> #define ICN8318_MAX_TOUCHES 5 >> >> +#define ICN8505_REG_TOUCHDATA 0x1000 >> +#define ICN8505_REG_CONFIGDATA 0x8000 >> + >> +enum icn8318_model { >> + ICN8318, >> + ICN8505, >> +}; >> + >> struct icn8318_touch { >> __u8 slot; >> __be16 x; >> @@ -54,27 +63,37 @@ struct icn8318_data { >> struct input_dev *input; >> struct gpio_desc *wake_gpio; >> struct touchscreen_properties prop; >> + enum icn8318_model model; >> + int touchdata_reg; >> }; >> >> -static int icn8318_read_touch_data(struct i2c_client *client, >> - struct icn8318_touch_data *touch_data) >> +static int icn8318_read_data(struct icn8318_data *data, int reg, >> + void *buf, int len) >> { >> - u8 reg = ICN8318_REG_TOUCHDATA; >> + u8 addr[2]; >> struct i2c_msg msg[2] = { >> { >> - .addr = client->addr, >> - .len = 1, >> - .buf = ® >> + .addr = data->client->addr, >> + .buf = addr >> }, >> { >> - .addr = client->addr, >> + .addr = data->client->addr, >> .flags = I2C_M_RD, >> - .len = sizeof(struct icn8318_touch_data), >> - .buf = (u8 *)touch_data >> + .len = len, >> + .buf = buf >> } >> }; >> >> - return i2c_transfer(client->adapter, msg, 2); >> + if (data->model == ICN8318) { >> + addr[0] = reg; >> + msg[0].len = 1; >> + } else { >> + addr[0] = reg >> 8; >> + addr[1] = reg & 0xff; >> + msg[0].len = 2; >> + } >> + >> + return i2c_transfer(data->client->adapter, msg, 2); >> } >> >> static inline bool icn8318_touch_active(u8 event) >> @@ -83,6 +102,14 @@ static inline bool icn8318_touch_active(u8 event) >> (event == ICN8318_EVENT_UPDATE2); >> } >> >> +static u16 icn8318_coord_to_cpu(struct icn8318_data *data, __be16 coord) >> +{ >> + if (data->model == ICN8318) >> + return be16_to_cpu(coord); >> + else >> + return le16_to_cpu((__force __le16)coord); > > Hmm, this is quite ugly now. I'd drop the __be16 designations on > touch->x/y, made them u8 x[2], y[2], and used get_unaligned_le16() and > get_unaligned_be16() on them... > > I also wonder if it would not be cleaner if instead of model constant > you used cost struct with pointers and other chip-specific data. Ok, all suggested improvements have been done for the upcoming v3 of the patch-set. Regards, Hans > >> +} >> + >> static irqreturn_t icn8318_irq(int irq, void *dev_id) >> { >> struct icn8318_data *data = dev_id; >> @@ -90,7 +117,8 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id) >> struct icn8318_touch_data touch_data; >> int i, ret; >> >> - ret = icn8318_read_touch_data(data->client, &touch_data); >> + ret = icn8318_read_data(data, data->touchdata_reg, >> + &touch_data, sizeof(touch_data)); >> if (ret < 0) { >> dev_err(dev, "Error reading touch data: %d\n", ret); >> return IRQ_HANDLED; >> @@ -122,8 +150,9 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id) >> continue; >> >> touchscreen_report_pos(data->input, &data->prop, >> - be16_to_cpu(touch->x), >> - be16_to_cpu(touch->y), true); >> + icn8318_coord_to_cpu(data, touch->x), >> + icn8318_coord_to_cpu(data, touch->y), >> + true); >> } >> >> input_mt_sync_frame(data->input); >> @@ -187,6 +216,8 @@ static int icn8318_probe_of(struct icn8318_data *data, struct device *dev) >> { >> int error; >> >> + data->model = (long)of_device_get_match_data(dev); >> + >> data->wake_gpio = devm_gpiod_get(dev, "wake", GPIOD_OUT_LOW); >> if (IS_ERR(data->wake_gpio)) { >> error = PTR_ERR(data->wake_gpio); >> @@ -210,6 +241,7 @@ static int icn8318_probe(struct i2c_client *client) >> struct icn8318_data *data; >> struct input_dev *input; >> int error; >> + __le16 resolution[2]; >> >> if (!client->irq) { >> dev_err(dev, "Error no irq specified\n"); >> @@ -240,6 +272,24 @@ static int icn8318_probe(struct i2c_client *client) >> if (error) >> return error; >> >> + if (data->model == ICN8318) { >> + data->touchdata_reg = ICN8318_REG_TOUCHDATA; >> + } else { >> + data->touchdata_reg = ICN8505_REG_TOUCHDATA; >> + >> + error = icn8318_read_data(data, ICN8505_REG_CONFIGDATA, >> + resolution, sizeof(resolution)); >> + if (error < 0) { >> + dev_err(dev, "Error reading resolution: %d\n", error); >> + return error; >> + } >> + >> + input_set_abs_params(input, ABS_MT_POSITION_X, 0, >> + le16_to_cpu(resolution[0]) - 1, 0, 0); >> + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, >> + le16_to_cpu(resolution[1]) - 1, 0, 0); >> + } >> + >> touchscreen_parse_properties(input, true, &data->prop); >> if (!input_abs_get_max(input, ABS_MT_POSITION_X) || >> !input_abs_get_max(input, ABS_MT_POSITION_Y)) { >> @@ -274,7 +324,8 @@ static int icn8318_probe(struct i2c_client *client) >> } >> >> static const struct of_device_id icn8318_of_match[] = { >> - { .compatible = "chipone,icn8318" }, >> + { .compatible = "chipone,icn8318", .data = (void *)ICN8318 }, >> + { .compatible = "chipone,icn8505", .data = (void *)ICN8505 }, >> { } >> }; >> MODULE_DEVICE_TABLE(of, icn8318_of_match); >> -- >> 2.13.0 >> > -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt index d11f8d615b5d..9fdd80749386 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt @@ -1,7 +1,7 @@ * ChipOne icn8318 I2C touchscreen controller Required properties: - - compatible : "chipone,icn8318" + - compatible : "chipone,icn8318" or "chipone,icn8505" - reg : I2C slave address of the chip (0x40) - interrupt-parent : a phandle pointing to the interrupt controller serving the interrupt for this chip diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index cf26ca49ae6d..fff1467506e7 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -157,7 +157,8 @@ config TOUCHSCREEN_CHIPONE_ICN8318 depends on I2C depends on OF help - Say Y here if you have a ChipOne icn8318 based I2C touchscreen. + Say Y here if you have a ChipOne icn8318 or icn8505 based + I2C touchscreen. If unsure, say N. diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c index ddaae91f02fc..43cc38734d8e 100644 --- a/drivers/input/touchscreen/chipone_icn8318.c +++ b/drivers/input/touchscreen/chipone_icn8318.c @@ -1,7 +1,7 @@ /* * Driver for ChipOne icn8318 i2c touchscreen controller * - * Copyright (c) 2015 Red Hat Inc. + * Copyright (c) 2015-2017 Red Hat Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,6 +20,7 @@ #include <linux/input/touchscreen.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #define ICN8318_REG_POWER 4 #define ICN8318_REG_TOUCHDATA 16 @@ -30,6 +31,14 @@ #define ICN8318_MAX_TOUCHES 5 +#define ICN8505_REG_TOUCHDATA 0x1000 +#define ICN8505_REG_CONFIGDATA 0x8000 + +enum icn8318_model { + ICN8318, + ICN8505, +}; + struct icn8318_touch { __u8 slot; __be16 x; @@ -54,27 +63,37 @@ struct icn8318_data { struct input_dev *input; struct gpio_desc *wake_gpio; struct touchscreen_properties prop; + enum icn8318_model model; + int touchdata_reg; }; -static int icn8318_read_touch_data(struct i2c_client *client, - struct icn8318_touch_data *touch_data) +static int icn8318_read_data(struct icn8318_data *data, int reg, + void *buf, int len) { - u8 reg = ICN8318_REG_TOUCHDATA; + u8 addr[2]; struct i2c_msg msg[2] = { { - .addr = client->addr, - .len = 1, - .buf = ® + .addr = data->client->addr, + .buf = addr }, { - .addr = client->addr, + .addr = data->client->addr, .flags = I2C_M_RD, - .len = sizeof(struct icn8318_touch_data), - .buf = (u8 *)touch_data + .len = len, + .buf = buf } }; - return i2c_transfer(client->adapter, msg, 2); + if (data->model == ICN8318) { + addr[0] = reg; + msg[0].len = 1; + } else { + addr[0] = reg >> 8; + addr[1] = reg & 0xff; + msg[0].len = 2; + } + + return i2c_transfer(data->client->adapter, msg, 2); } static inline bool icn8318_touch_active(u8 event) @@ -83,6 +102,14 @@ static inline bool icn8318_touch_active(u8 event) (event == ICN8318_EVENT_UPDATE2); } +static u16 icn8318_coord_to_cpu(struct icn8318_data *data, __be16 coord) +{ + if (data->model == ICN8318) + return be16_to_cpu(coord); + else + return le16_to_cpu((__force __le16)coord); +} + static irqreturn_t icn8318_irq(int irq, void *dev_id) { struct icn8318_data *data = dev_id; @@ -90,7 +117,8 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id) struct icn8318_touch_data touch_data; int i, ret; - ret = icn8318_read_touch_data(data->client, &touch_data); + ret = icn8318_read_data(data, data->touchdata_reg, + &touch_data, sizeof(touch_data)); if (ret < 0) { dev_err(dev, "Error reading touch data: %d\n", ret); return IRQ_HANDLED; @@ -122,8 +150,9 @@ static irqreturn_t icn8318_irq(int irq, void *dev_id) continue; touchscreen_report_pos(data->input, &data->prop, - be16_to_cpu(touch->x), - be16_to_cpu(touch->y), true); + icn8318_coord_to_cpu(data, touch->x), + icn8318_coord_to_cpu(data, touch->y), + true); } input_mt_sync_frame(data->input); @@ -187,6 +216,8 @@ static int icn8318_probe_of(struct icn8318_data *data, struct device *dev) { int error; + data->model = (long)of_device_get_match_data(dev); + data->wake_gpio = devm_gpiod_get(dev, "wake", GPIOD_OUT_LOW); if (IS_ERR(data->wake_gpio)) { error = PTR_ERR(data->wake_gpio); @@ -210,6 +241,7 @@ static int icn8318_probe(struct i2c_client *client) struct icn8318_data *data; struct input_dev *input; int error; + __le16 resolution[2]; if (!client->irq) { dev_err(dev, "Error no irq specified\n"); @@ -240,6 +272,24 @@ static int icn8318_probe(struct i2c_client *client) if (error) return error; + if (data->model == ICN8318) { + data->touchdata_reg = ICN8318_REG_TOUCHDATA; + } else { + data->touchdata_reg = ICN8505_REG_TOUCHDATA; + + error = icn8318_read_data(data, ICN8505_REG_CONFIGDATA, + resolution, sizeof(resolution)); + if (error < 0) { + dev_err(dev, "Error reading resolution: %d\n", error); + return error; + } + + input_set_abs_params(input, ABS_MT_POSITION_X, 0, + le16_to_cpu(resolution[0]) - 1, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, + le16_to_cpu(resolution[1]) - 1, 0, 0); + } + touchscreen_parse_properties(input, true, &data->prop); if (!input_abs_get_max(input, ABS_MT_POSITION_X) || !input_abs_get_max(input, ABS_MT_POSITION_Y)) { @@ -274,7 +324,8 @@ static int icn8318_probe(struct i2c_client *client) } static const struct of_device_id icn8318_of_match[] = { - { .compatible = "chipone,icn8318" }, + { .compatible = "chipone,icn8318", .data = (void *)ICN8318 }, + { .compatible = "chipone,icn8505", .data = (void *)ICN8505 }, { } }; MODULE_DEVICE_TABLE(of, icn8318_of_match);
The icn8505 variant found on some x86 tablets has almost the same protocol as the 8318, protocol wise there are only a few small differences: 1) The 8505 uses 16 bit register addresses and has a different register address for the location of the touch data. 2) The 8505 coordinates are in little-endian format instead of in be. 3) The 8505 allows reading the resolution back from the controller Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: -Read resolution directly from the controller --- .../bindings/input/touchscreen/chipone_icn8318.txt | 2 +- drivers/input/touchscreen/Kconfig | 3 +- drivers/input/touchscreen/chipone_icn8318.c | 81 ++++++++++++++++++---- 3 files changed, 69 insertions(+), 17 deletions(-)