@@ -150,6 +150,10 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout);
+ /* Linger a bit, prior to the next control message. */
+ if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
+ msleep(200);
+
kfree(dr);
return ret;
@@ -227,7 +227,8 @@ static const struct usb_device_id usb_quirk_list[] = {
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
/* Corsair Strafe RGB */
- { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT },
+ { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT |
+ USB_QUIRK_DELAY_CTRL_MSG },
/* Corsair K70 LUX */
{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
@@ -63,4 +63,7 @@
*/
#define USB_QUIRK_DISCONNECT_SUSPEND BIT(12)
+/* Device needs a pause after every control message. */
+#define USB_QUIRK_DELAY_CTRL_MSG BIT(13)
+
#endif /* __LINUX_USB_QUIRKS_H */
Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines. Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> --- v2: remove empty line in usb_get_descriptor() added by accident --- drivers/usb/core/message.c | 4 ++++ drivers/usb/core/quirks.c | 3 ++- include/linux/usb/quirks.h | 3 +++ 3 files changed, 9 insertions(+), 1 deletion(-)