[v9,0/2] hid-steam driver with user mode client dection

Commit Message

Rodrigo Rivas Costa May 4, 2018, 10:16 a.m. UTC

On Fri, May 04, 2018 at 10:12:51AM +0200, Jiri Kosina wrote:
> On Mon, 16 Apr 2018, Rodrigo Rivas Costa wrote:
> 
> > Hello! This is reroll v9 of the Steam Controller driver.
> > 
> > @Pierre-Loup, @Clément, could you please check if this driver is acceptable by
> > Valve? I think this could be the one ;-).
> > 
> > I've rolled back the synthetic LPAD diagonals. It happens that the actual
> > coordinates of the pads are rotated about 15 degrees to the center, but the
> > marks in the pad are aligned to 0/90 degrees. That, and my poor's man
> > trigonometry, makes clicking the diagonals quite unreliable.
> > Sorry for the noise, but now I think that we are better limiting ourselves to
> > the events emitted by the hardware, as is.
> > 
> > Other than that, I've doing some torture testing, with and without the Steam
> > Client running. I've changed:
> >  1. The way EPIPE is handled when sending a report: I've noticed that Steam
> >     Client retries up to 50 times, with little or no delay between them, so I do
> >     the same.
> >  2. I've added a fallback in case this driver is unable to get the serial number
> >     of the controller. Failures on any other report can be ignored safely. But
> >     failing to get the serial number was preventing the creating of the hidraw
> >     node (wired controller only), and that could prevent Steam Client from
> >     working. 
> >  3. I've received a mail from Valve with a bunch of constants for the
> >     protocol. Most are related to the setting of new mappings (that we do not
> >     need) and a few of the rest are deprecated. Anyway, I've renamed the
> >     constants STEAM_CMD_* to align them with the official names, and added a
> >     few more that were unknown to me, just for future reference. Still, commands
> >     used for enabling/disabling lizard mode are the same.
> 
> If noone has any objections (last chance to raise them), I'll be queuing 
> this for 4.18.

That would be great, thanks!

Now that my distro upgraded to 4.16, without the hid-quirks array, I've been
testing it a bit more. 

It works great, but I've noticed that I've missed a couple of lines when
creating the client hdev.  It doesn't seem to cause any harm, and anyway 'type'
and 'country' are currently both 0 in my controller; only 'version' is visibly
different but who uses that?

Anyway, this would be the change, I don't know if it is worth a whole reroll...


Best regards,
--
Rodrigo Rivas Costa

> 
> Thanks,
> 
> -- 
> Jiri Kosina
> SUSE Labs
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Jiri Kosina May 15, 2018, 9:11 a.m. UTC | #1

On Fri, 4 May 2018, Rodrigo Rivas Costa wrote:

> > If noone has any objections (last chance to raise them), I'll be 
> > queuing this for 4.18.
> 
> That would be great, thanks!
> 
> Now that my distro upgraded to 4.16, without the hid-quirks array, I've been
> testing it a bit more. 
> 
> It works great, but I've noticed that I've missed a couple of lines when
> creating the client hdev.  It doesn't seem to cause any harm, and anyway 'type'
> and 'country' are currently both 0 in my controller; only 'version' is visibly
> different but who uses that?
> 
> Anyway, this would be the change, I don't know if it is worth a whole reroll...

I've put this on top of your patches and queued in for-4.18/hid-steam. 
Thanks,

Patch

diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c
index af7ebb618867..cb86cc834201 100644
--- a/drivers/hid/hid-steam.c
+++ b/drivers/hid/hid-steam.c
@@ -651,6 +651,9 @@  static struct hid_device *steam_create_client_hid(struct hid_device *hdev)
        client_hdev->bus = hdev->bus;
        client_hdev->vendor = hdev->vendor;
        client_hdev->product = hdev->product;
+       client_hdev->version = hdev->version;
+       client_hdev->type = hdev->type;
+       client_hdev->country = hdev->country;
        strlcpy(client_hdev->name, hdev->name,
                        sizeof(client_hdev->name));
        strlcpy(client_hdev->phys, hdev->phys,