@@ -1,6 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _M68K_IO_H
+#define _M68K_IO_H
+
#if defined(__uClinux__) || defined(CONFIG_COLDFIRE)
#include <asm/io_no.h>
#else
#include <asm/io_mm.h>
#endif
+
+#include <asm-generic/io.h>
+
+#endif /* _M68K_IO_H */
@@ -16,8 +16,8 @@
* isa_readX(),isa_writeX() are for ISA memory
*/
-#ifndef _IO_H
-#define _IO_H
+#ifndef _M68K_IO_MM_H
+#define _M68K_IO_MM_H
#ifdef __KERNEL__
@@ -367,40 +367,6 @@ static inline void isa_delay(void)
#define writew(val, addr) out_le16((addr), (val))
#endif /* CONFIG_ATARI_ROM_ISA */
-#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA)
-/*
- * We need to define dummy functions for GENERIC_IOMAP support.
- */
-#define inb(port) 0xff
-#define inb_p(port) 0xff
-#define outb(val,port) ((void)0)
-#define outb_p(val,port) ((void)0)
-#define inw(port) 0xffff
-#define inw_p(port) 0xffff
-#define outw(val,port) ((void)0)
-#define outw_p(val,port) ((void)0)
-#define inl(port) 0xffffffffUL
-#define inl_p(port) 0xffffffffUL
-#define outl(val,port) ((void)0)
-#define outl_p(val,port) ((void)0)
-
-#define insb(port,buf,nr) ((void)0)
-#define outsb(port,buf,nr) ((void)0)
-#define insw(port,buf,nr) ((void)0)
-#define outsw(port,buf,nr) ((void)0)
-#define insl(port,buf,nr) ((void)0)
-#define outsl(port,buf,nr) ((void)0)
-
-/*
- * These should be valid on any ioremap()ed region
- */
-#define readb(addr) in_8(addr)
-#define writeb(val,addr) out_8((addr),(val))
-#define readw(addr) in_le16(addr)
-#define writew(val,addr) out_le16((addr),(val))
-
-#endif /* !CONFIG_ISA && !CONFIG_ATARI_ROM_ISA */
-
#define readl(addr) in_le32(addr)
#define writel(val,addr) out_le32((addr),(val))
@@ -442,4 +408,4 @@ static inline void isa_delay(void)
#define writew_relaxed(b, addr) writew(b, addr)
#define writel_relaxed(b, addr) writel(b, addr)
-#endif /* _IO_H */
+#endif /* _M68K_IO_MM_H */
@@ -133,6 +133,5 @@ static inline void writel(u32 value, volatile void __iomem *addr)
#include <asm/kmap.h>
#include <asm/virtconvert.h>
-#include <asm-generic/io.h>
#endif /* _M68KNOMMU_IO_H */
The dummy functions defined in <asm/io_mm.h> can be provided by <asm-generic/io.h>. As nommu already uses <asm-generic/io.h>, move its inclusion to <asm/io.h>, and add/adjust include guards where appropriate. This gets rid of lots of "statement with no effect" and "unused variable" warnings when compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> --- v2: - No changes. --- arch/m68k/include/asm/io.h | 7 ++++++ arch/m68k/include/asm/io_mm.h | 40 +++-------------------------------- arch/m68k/include/asm/io_no.h | 1 - 3 files changed, 10 insertions(+), 38 deletions(-)