@@ -294,6 +294,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
field->usage[i].collection_index =
parser->local.collection_index[j];
field->usage[i].usage_index = i;
+ field->usage[i].resolution_multiplier = 1;
}
field->maxusage = usages;
@@ -947,6 +948,167 @@ struct hid_report *hid_validate_values(struct hid_device *hid,
}
EXPORT_SYMBOL_GPL(hid_validate_values);
+static int hid_calculate_multiplier(struct hid_device *hid,
+ struct hid_field *multiplier)
+{
+ int m;
+ __s32 v = *multiplier->value;
+ __s32 lmin = multiplier->logical_minimum;
+ __s32 lmax = multiplier->logical_maximum;
+ __s32 pmin = multiplier->physical_minimum;
+ __s32 pmax = multiplier->physical_maximum;
+
+ /*
+ * "Because OS implementations will generally divide the control's
+ * reported count by the Effective Resolution Multiplier, designers
+ * should take care not to establish a potential Effective
+ * Resolution Multiplier of zero."
+ * HID Usage Table, v1.12, Section 4.3.1, p31
+ */
+ if (lmax - lmin == 0)
+ return 1;
+ /*
+ * Handling the unit exponent is left as an exercise to whoever
+ * finds a device where that exponent is not 0.
+ */
+ m = ((v - lmin)/(lmax - lmin) * (pmax - pmin) + pmin);
+ if (unlikely(multiplier->unit_exponent != 0)) {
+ hid_warn(hid,
+ "unsupported Resolution Multiplier unit exponent %d\n",
+ multiplier->unit_exponent);
+ }
+
+ /* There are no devices with an effective multiplier > 255 */
+ if (unlikely(m == 0 || m > 255 || m < -255)) {
+ hid_warn(hid, "unsupported Resolution Multiplier %d\n", m);
+ m = 1;
+ }
+
+ return m;
+}
+
+static void hid_apply_multiplier_to_field(struct hid_device *hid,
+ struct hid_field *field,
+ struct hid_collection *multiplier_collection,
+ int effective_multiplier)
+{
+ struct hid_collection *collection;
+ struct hid_usage *usage;
+ int i;
+
+ /*
+ * If multiplier_collection is NULL, the multiplier applies
+ * to all fields in the report.
+ * Otherwise, it is the Logical Collection the multiplier applies to
+ * but our field may be in a subcollection of that collection.
+ */
+ for (i = 0; i < field->maxusage; i++) {
+ usage = &field->usage[i];
+
+ collection = &hid->collection[usage->collection_index];
+ while (collection && collection != multiplier_collection)
+ collection = collection->parent;
+
+ if (collection || multiplier_collection == NULL)
+ usage->resolution_multiplier = effective_multiplier;
+
+ }
+}
+
+static void hid_apply_multiplier(struct hid_device *hid,
+ struct hid_field *multiplier)
+{
+ struct hid_report_enum *rep_enum;
+ struct hid_report *rep;
+ struct hid_field *field;
+ struct hid_collection *multiplier_collection;
+ int effective_multiplier;
+ int i;
+
+ /*
+ * "The Resolution Multiplier control must be contained in the same
+ * Logical Collection as the control(s) to which it is to be applied.
+ * If no Resolution Multiplier is defined, then the Resolution
+ * Multiplier defaults to 1. If more than one control exists in a
+ * Logical Collection, the Resolution Multiplier is associated with
+ * all controls in the collection. If no Logical Collection is
+ * defined, the Resolution Multiplier is associated with all
+ * controls in the report."
+ * HID Usage Table, v1.12, Section 4.3.1, p30
+ *
+ * Thus, search from the current collection upwards until we find a
+ * logical collection. Then search all fields for that same parent
+ * collection. Those are the fields the multiplier applies to.
+ *
+ * If we have more than one multiplier, it will overwrite the
+ * applicable fields later.
+ */
+ multiplier_collection = &hid->collection[multiplier->usage->collection_index];
+ while (multiplier_collection &&
+ multiplier_collection->type != HID_COLLECTION_LOGICAL)
+ multiplier_collection = multiplier_collection->parent;
+
+ effective_multiplier = hid_calculate_multiplier(hid, multiplier);
+
+ rep_enum = &hid->report_enum[HID_INPUT_REPORT];
+ list_for_each_entry(rep, &rep_enum->report_list, list) {
+ for (i = 0; i < rep->maxfield; i++) {
+ field = rep->field[i];
+ hid_apply_multiplier_to_field(hid, field,
+ multiplier_collection,
+ effective_multiplier);
+ }
+ }
+}
+
+/*
+ * hid_setup_resolution_multiplier - set up all resolution multipliers
+ *
+ * @device: hid device
+ *
+ * Search for all Resolution Multiplier Feature Reports and apply their
+ * value to all matching Input items. This only updates the internal struct
+ * fields.
+ *
+ * The Resolution Multiplier is applied by the hardware. If the multiplier
+ * is anything other than 1, the hardware will send pre-multiplied events
+ * so that the same physical interaction generates an accumulated
+ * accumulated_value = value * * multiplier
+ * This may be achieved by sending
+ * - "value * multiplier" for each event, or
+ * - "value" but "multiplier" times as frequently, or
+ * - a combination of the above
+ * The only guarantee is that the same physical interaction always generates
+ * an accumulated 'value * multiplier'.
+ *
+ * This function must be called before any event processing and after
+ * any SetRequest to the Resolution Multiplier.
+ */
+void hid_setup_resolution_multiplier(struct hid_device *hid)
+{
+ struct hid_report_enum *rep_enum;
+ struct hid_report *rep;
+ struct hid_usage *usage;
+ int i, j;
+
+ rep_enum = &hid->report_enum[HID_FEATURE_REPORT];
+ list_for_each_entry(rep, &rep_enum->report_list, list) {
+ for (i = 0; i < rep->maxfield; i++) {
+ /* Ignore if report count is out of bounds. */
+ if (rep->field[i]->report_count < 1)
+ continue;
+
+ for (j = 0; j < rep->field[i]->maxusage; j++) {
+ usage = &rep->field[i]->usage[j];
+ if (usage->hid == HID_GD_RESOLUTION_MULTIPLIER)
+ hid_apply_multiplier(hid,
+ rep->field[i]);
+ }
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(hid_setup_resolution_multiplier);
+
/**
* hid_open_report - open a driver-specific device report
*
@@ -1043,9 +1205,17 @@ int hid_open_report(struct hid_device *device)
hid_err(device, "unbalanced delimiter at end of report description\n");
goto err;
}
+
+ /*
+ * fetch initial values in case the device's
+ * default multiplier isn't the recommended 1
+ */
+ hid_setup_resolution_multiplier(device);
+
kfree(parser->collection_stack);
vfree(parser);
device->status |= HID_STAT_PARSED;
+
return 0;
}
}
@@ -219,6 +219,7 @@ struct hid_item {
#define HID_GD_VBRZ 0x00010045
#define HID_GD_VNO 0x00010046
#define HID_GD_FEATURE 0x00010047
+#define HID_GD_RESOLUTION_MULTIPLIER 0x00010048
#define HID_GD_SYSTEM_CONTROL 0x00010080
#define HID_GD_UP 0x00010090
#define HID_GD_DOWN 0x00010091
@@ -437,6 +438,8 @@ struct hid_usage {
unsigned hid; /* hid usage code */
unsigned collection_index; /* index into collection array */
unsigned usage_index; /* index into usage array */
+ __s8 resolution_multiplier;/* Effective Resolution Multiplier
+ (HUT v1.12, 4.3.1), default: 1 */
/* hidinput data */
__u16 code; /* input driver code */
__u8 type; /* input driver type */
@@ -894,6 +897,8 @@ struct hid_report *hid_validate_values(struct hid_device *hid,
unsigned int type, unsigned int id,
unsigned int field_index,
unsigned int report_counts);
+
+void hid_setup_resolution_multiplier(struct hid_device *hid);
int hid_open_report(struct hid_device *device);
int hid_check_keys_pressed(struct hid_device *hid);
int hid_connect(struct hid_device *hid, unsigned int connect_mask);
The Resolution Multiplier is a feature report that modifies the value of Usages within the same Logical Collection. Where set, the effective multiplier (calculated based on the physical dimensions of the multiplier field) affects the event value. That's done in hardware, so the values we receive are pre-multiplied. This was introduced for high-resolution scrolling in Windows Vista and is commonly used on Microsoft mice. The recommendation for the resolution multiplier is to be 1 by default. We put some extra limits here to cap at 255. The only known usage for this is for scroll wheels where the multiplier has to be a fraction of 120 to work with Windows. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> --- drivers/hid/hid-core.c | 170 +++++++++++++++++++++++++++++++++++++++++ include/linux/hid.h | 5 ++ 2 files changed, 175 insertions(+)