Message ID | 20190302180714.90014-2-andriy.shevchenko@linux.intel.com (mailing list archive) |
---|---|
State | Mainlined |
Commit | fc226eb23e62731712b30114479f4a791fee4c00 |
Headers | show |
Series | Input: edt-ft5x06: Enable for ACPI | expand |
On Sat, Mar 02, 2019 at 09:07:13PM +0300, Andy Shevchenko wrote: > ACPI allows to enumerate specific devices by using compatible strings. > Enable that enumeration for EDT touchscreen devices. > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Applied, thank you. > --- > drivers/input/touchscreen/edt-ft5x06.c | 7 ++----- > 1 file changed, 2 insertions(+), 5 deletions(-) > > diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c > index 1e18ca0d1b4e..bcd3d9d7367f 100644 > --- a/drivers/input/touchscreen/edt-ft5x06.c > +++ b/drivers/input/touchscreen/edt-ft5x06.c > @@ -38,7 +38,6 @@ > #include <linux/gpio/consumer.h> > #include <linux/input/mt.h> > #include <linux/input/touchscreen.h> > -#include <linux/of_device.h> > > #define WORK_REGISTER_THRESHOLD 0x00 > #define WORK_REGISTER_REPORT_RATE 0x08 > @@ -981,7 +980,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, > return -ENOMEM; > } > > - chip_data = of_device_get_match_data(&client->dev); > + chip_data = device_get_match_data(&client->dev); > if (!chip_data) > chip_data = (const struct edt_i2c_chip_data *)id->driver_data; > if (!chip_data || !chip_data->max_support_points) { > @@ -1161,7 +1160,6 @@ static const struct i2c_device_id edt_ft5x06_ts_id[] = { > }; > MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id); > > -#ifdef CONFIG_OF > static const struct of_device_id edt_ft5x06_of_match[] = { > { .compatible = "edt,edt-ft5206", .data = &edt_ft5x06_data }, > { .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data }, > @@ -1172,12 +1170,11 @@ static const struct of_device_id edt_ft5x06_of_match[] = { > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match); > -#endif > > static struct i2c_driver edt_ft5x06_ts_driver = { > .driver = { > .name = "edt_ft5x06", > - .of_match_table = of_match_ptr(edt_ft5x06_of_match), > + .of_match_table = edt_ft5x06_of_match, > .pm = &edt_ft5x06_ts_pm_ops, > }, > .id_table = edt_ft5x06_ts_id, > -- > 2.20.1 >
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 1e18ca0d1b4e..bcd3d9d7367f 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -38,7 +38,6 @@ #include <linux/gpio/consumer.h> #include <linux/input/mt.h> #include <linux/input/touchscreen.h> -#include <linux/of_device.h> #define WORK_REGISTER_THRESHOLD 0x00 #define WORK_REGISTER_REPORT_RATE 0x08 @@ -981,7 +980,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, return -ENOMEM; } - chip_data = of_device_get_match_data(&client->dev); + chip_data = device_get_match_data(&client->dev); if (!chip_data) chip_data = (const struct edt_i2c_chip_data *)id->driver_data; if (!chip_data || !chip_data->max_support_points) { @@ -1161,7 +1160,6 @@ static const struct i2c_device_id edt_ft5x06_ts_id[] = { }; MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id); -#ifdef CONFIG_OF static const struct of_device_id edt_ft5x06_of_match[] = { { .compatible = "edt,edt-ft5206", .data = &edt_ft5x06_data }, { .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data }, @@ -1172,12 +1170,11 @@ static const struct of_device_id edt_ft5x06_of_match[] = { { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match); -#endif static struct i2c_driver edt_ft5x06_ts_driver = { .driver = { .name = "edt_ft5x06", - .of_match_table = of_match_ptr(edt_ft5x06_of_match), + .of_match_table = edt_ft5x06_of_match, .pm = &edt_ft5x06_ts_pm_ops, }, .id_table = edt_ft5x06_ts_id,
ACPI allows to enumerate specific devices by using compatible strings. Enable that enumeration for EDT touchscreen devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/input/touchscreen/edt-ft5x06.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)